Age | Commit message (Collapse) | Author | Files | Lines |
|
Tested: Run ipmitool sensor list and verify the output is as
expected.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: Ibd81144adf8cb1477a8963cc3b8331b72c1a928b
|
|
ipmb may not be ready for communication when me-time-sync start.
Add some retry so that the time could be synced.
Tested: Test 10 times, me-time-sync can work well
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I93343d2ac17fc13b1d094bf05f424d9cb54cfa3f
|
|
The default http-body-limit is 30 MiB, bytedance's system uses 64MiB
chips so potentially the largest upload size is 64MiB+ (uncompressed
tarball)
Increase it to 65MiB so bmcweb accept such uploads.
Tested: Upload a tarball that is larger than 32MiB, and verify it works
fine.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I0551b34234b14c40d01ea61e88062572deb344c8
|
|
The obmc-mapper.target is removed from the repo and will be installed in
another openbmc recipe.
Bump the srcrev cd0ebe867b..3ac78dfd6e and remove the obmc-mapper.target
from its recipe.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: If01074d52db9690e1b74cc63eed6eceb3e850f60
|
|
Maciej Magdziarz (1):
Firmware: Remove redundant label handling
Sukanya Pandey (1):
Add system table missing properties
Change-Id: Iee97f3b3308891b8712284ce31cfd869b1b45b49
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
P Dheeraj Srujan Kumar (2):
Fix Klocwork Issues - Return from int main()
Dbus_Rest: Fix bmcweb crash
Change-Id: I7454012629bca913f24300b2a9d270fcb15c3d4a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (2):
MAINTAINERS: update email/discord ID for Tom
MAINTAINERS: Replace IRC by DISCORD
Change-Id: I7699bc9c3dbc57a084ed1a349e2d6c6f75390267
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (1):
MAINTAINERS: update email/discord_id for Tom
Change-Id: I59b02e0e21d83950e4d4d487c7d6bb0b5beec1b9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (2):
MAINTAINERS: Remove Tom from maintainers list
MAINTAINERS: Replace IRC by DISCORD
Change-Id: I8680858be882f4be328510e59ce59b253d4453e4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sridevi Ramesh (1):
BIOS: Add new option value 'ManualOnly' for 'pvm_stop_at_standby'
Change-Id: I751c8117aff9df101b3a657eea3af9ea9a9be852
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zhikui Ren (1):
fix klocwork issues: Add return 0 for int main()
Change-Id: Id410d75c07c81bc5ae4c6137fe4a0321f236d310
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
No one is using this device on OpenBMC systems, and there is no
code to manage it in phosphor-networkd as of March 2021:
> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it. You can configure the linux kernel to build
> sit functionality but not create sit devices by default (I don't know
> how they haven't changed this yet in default kconfigs...) and it will
> still let you make them on the fly.
Facebook and Google systems force this option off already:
meta-facebook/meta-tiogapass/recipes-kernel/linux/linux-aspeed/tiogapass.cfg:CONFIG_IPV6_SIT=n
meta-google/recipes-kernel/linux/files/gbmc.cfg:CONFIG_IPV6_SIT=n
Change-Id: I9df02c761e82eeb2cca562bf68b9b755bc6feeb9
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.47 through to
5.10.49 stable releases.
Change-Id: I6d78d671405d87b70983b0e507abd0cd531b4aea
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I32e22b2e832998cbcf0dca2cd5f502f0156a0d8e
|
|
Andrew Jeffery (1):
ARM: dts: tacoma: Clean up KCS nodes
Dylan Hung (1):
ARM: dts: aspeed-g6: Fix HVI3C pinctrl function-group
Joel Stanley (5):
ARM: dts: ast2600evb: Enable EHCI controller
ARM: dts: aspeed: rainier: Enable earlycon
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: Re-enable XDMA on AST2600
Change-Id: Iee20de1cd1e69bc6f583dfaecd0d7e7688d73419
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5c3926bd7f021abec612015b5b4f69d9ca2aeb01
|
|
Add events-policy for fp5280g2.
Tested: Test ok.
Example: When the event is triggered, the destination can receive the
snmptrap.
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Change-Id: Ice498f49f348199f3686b8ec3c6575156e47d0f2
|
|
Ben Tyner (1):
Attn: Delay start until after CFAM override
Change-Id: I634e085de94e26d2fc89aa4a5a2b5fbc8e9ea8c0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Rashmica Gupta (1):
Add pressure to unit list
Change-Id: I8490341adeee86003e9db3453996a1cb9f2e7cd7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Enable the new BMC function to look at a CFAM register as a last chance
to see if the host is running.
See the following for more detail:
https://github.com/openbmc/docs/blob/master/designs/bmc-reset-with-host-up.md#note-on-custom-mechanism-for-ibm-systems
openpower-proc-control: srcrev bump f8c14bcfd5..3292c0676e
Andrew Geissler (8):
service-files: move to own sub-directory
primary-proc: move function to common utils
bmc-reset: check if host is running
bmc-reset: ensure error is created if host up
bmc-reset: call new host reset check service
bmc-reset: add support to write a cfam
bmc-reset: add support to clear host running register
bmc-reset: call new clear host running status service
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: If4f7c3a7a58bbe5c7fda09bdc949ed31f5cb1cbf
|
|
Revert back to install phosphor-ipm-kcs to image
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iad151c27c1f67fb8c6b8e422dde6a870ff32867f
|
|
Remove using external command in gbs-sysinit.sh
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I9fab3e275c822a0c87f5935cf912b258b923e33e
|
|
This sensor on the Op_Panel, one of them being a SI7020 type sensor
which needed to be enabled.
Signed-off-by: Bruce Mitchell <bruce.mitchell@linux.vnet.ibm.com>
Change-Id: Ib6a86a6fae52414ad9c6901e5f6f8aa8c8a383c3
|
|
phosphor-logging: srcrev bump cbc93a4962..530efbfc72
Ramesh Iyyar (3):
PEL: Repository: Added getLogID() as public method
PEL: Manager: Implemented the GetPELIdFromBMCLogId dbus method
PEL: Manager: Implemented the GetBMCLogIdFromPELId dbus method
phosphor-dbus-interfaces: srcrev bump 531c90e344..39bdb47118
Ramesh Iyyar (2):
open_power: PEL: Added the GetPELIdFromBMCLogId method
open_power: PEL: Added the GetBMCLogIdFromPELId method
Sharad Yadav (1):
Inventory: Add Decorator.Dimension interface
Tom Joseph (1):
MCTP: Define interface for MCTP endpoint enumeration
Vijay Lobo (1):
Entry: Add Resolution property
Willy Tu (1):
location code: add new item interface to support more connections types
Change-Id: Ib2983f821118bcc5877aff3915ed4d32589d682b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Fix the phosphor-inventory-manager_%.bbappend file and install
associations.json to /usr/share/phosphor-inventory-manager/
Tested: built phosphor-inventory-manager repo successfully and saw
the append associations.json file is successfully installed to
/usr/share/phosphor-inventory-manager/
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ic2c445f88794f359bef47170e8de446e8f7eb590
|
|
Add libmctp configs for fp5280g2, and use `astlpc` as
the startup parameter of the process.
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Id8737a745beb426b115522e75e0f434cadcbc253
|
|
William A. Kennington III (2):
gitignore: Update to better accommodate local building
kcsbridge: Remove package
Change-Id: Icf5213309c7b8ece62fac4962a0ef9ae0b224014
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Johnathan Mantey (1):
Manage configuration parser file state using RAII
Change-Id: I6a46e9dc133da2774de10f1bddd0eeabb6985045
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Kuiying Wang (1):
Ensure PSU sensor values are refreshed
Zev Weiss (1):
adcsensor: make BridgeGpio setup time configurable
Change-Id: If7a9c926785149e43e584c6dc917dc466812db61
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
B. J. Wyman (1):
docs: Minor formatting tweaks to EntityManagerDbusAPI
Ed Tanous (1):
Make build on clang
Change-Id: I993588a2463db775fd842b76f9c0630ab4c76e20
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Chris Cain (1):
Systems: Add PowerMode support
Ed Tanous (2):
Automate PrivilegeRegistry to code
Generated files should not be copyright
Change-Id: If3e56cc602293b37e1283d974b793a73a09d8684
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matthew Barth (1):
control: Stop forcing power state changed
Change-Id: I22f510bbf9dc6896633cccd9a992a34ea894ccdd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Shantappa Teekappanavar (1):
meson: remove old automake files
Change-Id: I1164d7964e27e4355ecd37fdb915889e95c2afd3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sampa Misra (1):
implement async handlers for all requester commands
Change-Id: I00156085fd0b2fe40e5536183bee3e5b6e2fe825
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
bc is a command-line, arbitrary-precision calculator with a
Turing-complete language.
Tested: The bc command is usable on target system.
Signed-off-by: Yong Zhao <yozhao@google.com>
Change-Id: Id91f5470e7b2a2b42da485e44eda63c97c096842
|
|
Also need to update the UCT and UNCT to 72 degree as default
for nvme rewrite script
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I7c744a1b21b4cfe6eb7204464ff77e3c3abb7ff5
|
|
This reverts commit f89db26b407e44a620eccfae7df3186d65bdfa0c.
Change-Id: Ie55acb2b8daf54ce416bc0a98a48ba1e6874dec8
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
This reverts commit f93003dd8cf24bd689a7cf24407273b54b9994d4.
Change-Id: Ia5ccc39e09d56b0ea083666eb8df3d858f1ac2f5
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
This reverts commit 3f2570e74ef929c7449911df18c1a8b9a59f02f1.
Change-Id: Ie9ccec722df88d857bcdc3b2661adb55490fc13a
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Rashmica Gupta (2):
Replace spaces in sensor name with underscores
Add check for sensor with same name
Change-Id: I41ab7a1c48430e7f9fc1230a23c52dd7b8c1e459
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Vijay Lobo (1):
PEL: Support ServiceProviderNotify property
Change-Id: Id9e35586ec2d149d363f62d741cb163a16d36ad5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Mike Capps (1):
presence: detect and report GPIO exceptions on startup
Change-Id: I763dcf655a3f306bdf5691d790cfd992f52a69cf
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Remove the phosphor-fan-control service files in place of having them
installed from the phosphor-fan-presence repository instead.
Change-Id: Ief1ad849fd217ddd455ba98833a6e31917988400
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
|
|
JSON configured phosphor-fan-control only uses the non-init service to
start phosphor-fan-control at multi-user.target and poweron in case its
stopped after multi-user.target is loaded.
YAML configured phosphor-fan-control continues to use both the init and
non-init service files without changing the targets each is linked to.
Change-Id: I51a6fd9cafb72cde3dc8a0b37423dd56d1184a21
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
|
|
Witherspoon uses a specialized phosphor-fan-control@.service file and
uses the phosphor-fan-control-init@.service file still to just set the
fans ready target. To correctly be included in the FILES directive,
these services need to be explicitly added on wiherspoon machines.
Change-Id: I76129a7833337aaf74fd83b0e28f3083f1a41b0a
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
|
|
Suryakanth Sekar (1):
OOB NV File Handling flow is corrected.
Change-Id: I82885fe73b7e1049d381b05a0449159358f0ea26
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
The openpower-debug-collector now supports meson
build infrastructure to build the binaries. Switching
to meson build system instead of using autotools.
The enable/disable install_error_yaml is an optional
feature used to check the availability of the required
packages to build binaries using autotools. In meson
build system, this feature is removed since the availability
of the packages are always checked, and therefore removing
it from the recipe file.
Added version bump 222131c to enable meson build support
Tested:
- Image build: MACHINE=witherspoon-tacoma bitbake obmc-phosphor-image
- Updated witherspoon-tacoma BMC with newly created image
- Verified watchdog_timeout and checkstop_app are installed
at /usr/bin directory
Signed-off-by: Shantappa Teekappanavar <sbteeks@yahoo.com>
Change-Id: Idc0fc31dbe1e604b4d010590ef18cc5f3638d65b
|
|
- ddimm
- capi connector
- nvme
- pcie slot
- pcie cable card top and bottom enclosures
- base op panel
Signed-off-by: Lakshminarayana R. Kammath <lkammath@in.ibm.com>
Change-Id: I7de498f83ab3bace4ce39deb98c31c71c40f2dd4
|
|
Add total_power sensor calculated by sum of PSU0_POUTPUT and
PSU1_POUTPUT.
Tested:
1. Check if total_power is present in WebUI and Redfish and its value is
sum of PSU0_POUTPUT and PSU1_POUTPUT.
2. Check total_power from IPMI
root@mtjade:~# ipmitool sdr list | grep total_power
total_power | 648 Watts | ok
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I304e7c9328f1f91f6f358f0e8472a107bf5479a0
|
|
Andrei Kartashev (1):
Refactor PCI properties export functions
Change-Id: I1f9e4f00c5e84f29df898af3eead3a49e3c0032c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|