Age | Commit message (Collapse) | Author | Files | Lines |
|
Mihawk cannot read the 250 soc sensor on the riser, this is because dts
defines pca9545riser@70 instead of pca9545@70.
(From meta-ibm rev: 731297ebde0eb4272d39260a30cd5f5b1f4e6f1a)
Change-Id: Ibcb72ef6be7c953cc35cc216e8cc45e283949e61
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Jason M. Bills (6):
Fix missing includes
Switch to std::cerr for prints
Don't delete the crashdump match on failure
Switch to a specific signal for crashdump complete
Improve PECI error checking and reporting
Correct model-specific error code checks for IERR logging
(From meta-intel rev: 317c8513788ca2dfb8a8c704b00084ce82933ef0)
Change-Id: Ib11e5e2124a13473d3ad6a5a75002ed9ff37efe2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Prior to this patch the Rainier system doesn't include any host
processor configuration. Rainier is a server with a host processor, so
include the correct host processor configuration.
(From meta-ibm rev: 5b44384b92419673b1ce7cca40c5dc613cc6d60a)
Change-Id: I3da77be772c3cd0f89539c8e56c5d0719ad84c44
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
James Feist (1):
Fix PSU PWM fan control
(From meta-phosphor rev: 626707a606fe1761bad11c3faae439244b180027)
Change-Id: Idf64d6470a5cb486e781465e54d26f36861d1fd8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Jolie Ku (1):
monitor: Mark a fan with a missing dbus sensor as nonfunctional
(From meta-phosphor rev: 9b745c5b9771f39b9e0b01351881b7953d5667ef)
Change-Id: If5a83c804c77c128ccf882985e18e9a89d077606
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dhruvaraj Subhashchandran (3):
Fix shellcheck errors in dreport
Create dump manager for each dump type.
Implement user requested system dump.
(From meta-phosphor rev: dd38f2588a852ea2f24bf98d9892729e1b37cfe8)
Change-Id: I94c6cd3666f03a959cd8bdea96cb8ab3dbcf88bb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dhruvaraj Subhashchandran (3):
Fix shellcheck errors in dreport
Create dump manager for each dump type.
Implement user requested system dump.
(From meta-phosphor rev: e9301773a15a88d8bfc2511e8728c2fee4d4082f)
Change-Id: Ibe9d4d5dac2a998e10a8b18bfa672334576b3c85
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dixsie Wolmers (1):
Update toast drop-shadow opacity
Yoshie Muranaka (3):
Create separate file for Vue Router routes
Move translation into routes file
Make customizations to IBM router
(From meta-phosphor rev: 201346cad1df991ae50e765f692a9e655053d44d)
Change-Id: I21bad52a5d531746ae173e0f67fb360a0902df60
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
George Hung (1):
Add to read model number from VPD
(From meta-phosphor rev: 3285bad4e0561c6eaa25a5a09033a42e23c812e8)
Change-Id: I031fbba0a084c96f9e89be8af102410d9f4d526f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Josh Lehan (1):
dbusutil: Fix critical bug in scaleSensorReading
(From meta-phosphor rev: e5c388836489e872442fdb3cd83aa5e670a2462a)
Change-Id: I35dbcede1b27e5aa11f7f8c5bfce350e8794957c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Bob King (1):
regulators: Modify monitorSensors() to use Services
Brandon Wyman (1):
psu-ng: Move analyze for PSUManager to cpp file
Shawn McCarney (2):
FileDescriptor: Add move and close methods
regulators: Create FFDCFile class
(From meta-phosphor rev: 415fa75f25f02b930066a320962d7a5978ec854f)
Change-Id: Iee0a067a76ab122b9f3d16c1ced6d1594a97f035
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Brad Bishop (1):
schemas: Intel Fan Connector
James Feist (1):
WFT: Add fan fault LEDs
(From meta-phosphor rev: 2da48d6bf45b87188d280f08383558deb2b6895b)
Change-Id: I0f2c4173d81d912fba7374d6d01ac87169308730
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Matt Spinler (1):
PEL: Implement CreatePELWithFFDCFiles
(From meta-phosphor rev: 64c70bd95d5ad359eaf4576f84ecdf281bdf61a8)
Change-Id: I40953a500500ddb7c6933c24ef7bc1591465b466
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Patrick Venture (8):
bmc: move transports vector into handler object
bmc: using namespace ipmi_flash simplifies reading
bmc: move support transports vector into factory
bmc: move data handler to owned object
bmc: move memory region size variable to method
cleanup: transition to emplace_back where possible
bmc: move the memoryRegionSize out of the method
bmc/test: drop unused variable
(From meta-phosphor rev: 34558f16cf71c58156c8df2fde1032a71139c330)
Change-Id: I30d759afffcbb809280daef2358ee631a833eadb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
1. add GBS sensors associations for Redfish
2. enable DBUS log service transactions through Redfish option
(From meta-quanta rev: a271b5e4d39d8d57a453f7ea2e500d309241e250)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: If71fc9e9ec4f47b7dc78bb0940588e801e6e8c45
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
max34451:
adjust pwrgd_pvpp/pwrgd_pvddio/pwrgd_cpuvr GAIN/threshold
to show normal value
p3v_bat_adc:
adjust GAIN to meet the deviation requirement
(From meta-quanta rev: 47decce839819001140663ed8eed71ffb31efa2b)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Ia30c6abe2f95490d52d01052289ed86178b7cdce
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
net/ncsi: Disable DEBUG
(From meta-aspeed rev: 59eb0deec79fa1939a450e74b416b75591b47788)
Change-Id: Ib3f7695606a936b86a8ff885ab2a5c9598eae736
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This brings:
- Support for VEGMAN
- reboot-guard-support is enabled by default
- Some code refactoring
- Using the PACKAGECONIFG instead of OEMESON to enable configure
options.
(From meta-yadro rev: a01e7828feac74f9ae65877b5fe352395cab8736)
Change-Id: Iff6566c7988722604735f6a43806e5485d1092f2
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ed Tanous (1):
Add maintainer
(From meta-phosphor rev: 1dac30c315e00c1881762392f148dccb963d9fb2)
Change-Id: I1b6e3cc1ef9e060f47fa6f731c187c386bbee065
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Igor Kononenko (1):
usb-ctrl: adds to configure the usb interface type
(From meta-phosphor rev: fd41defb5b3e12bdc4aaf8cb5c4e3349f2e3f021)
Change-Id: Iad9e7045e77c28803a0dd2be4bd328084c4be939
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ed Tanous (1):
Add maintainer
(From meta-phosphor rev: 4d915ce716d412809655002cf5909dffe6e78ab1)
Change-Id: I092be29edff5cfdb60da0114c975fe840aeaac3b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dixsie Wolmers (2):
Add optional fields to LDAP and CSR form
Add table search filter clear button
Sukanya Pandey (2):
Auto fill date and time input fields in DateTimeSetting page
Show total and filtered number of items in a table
(From meta-phosphor rev: 4a53de9e117c4f81f6a092fa7b90650adc3e4c3d)
Change-Id: Id9259a6590a32b100e4119214bae8889ff4c238f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
They were only required for building libsass, which has been rightly
deprecated, and is no longer required as of:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/35709
This commit will require the above before it will build.
Tested:
bitbake phosphor-webui built correctly when used with the above review.
Given after that review this functionality is no longer used, there is
realistically nothing to test.
(From meta-phosphor rev: 1d2116dd74a6985fdc4fd7c37bec359f1637da87)
Signed-off-by: Ed Tanous <ed@tanous.net>
Change-Id: Ia3d0a2f0337c937c7708cfd302da705b327ede21
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Although the project is trying to get away from the use of
obmc-phosphor-systemd, need to ensure it's being used where required.
This recipe utilizes it to create chassis/host synchronization and
action targets.
(From meta-phosphor rev: de30c9857a4b93e657a8c32af33f3c84f659463c)
Change-Id: I7ddc13c2997f8a38a59e81250aa1b03a76f7625c
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The openbmc project is moving away from obmc-phosphor-systemd and its
SYSTEMD_LINK macros in favor of more explicit package based
installation. This commit gets phosphor-state-manager going in the right
direction so that future targets and services can build on the new way
to do things.
The chassis/host action and synchronization targets still need some
additional thought and effort.
Tested:
Booted up image in QEMU and spot checked a few services ensuring they
were still in the expected locations.
(From meta-phosphor rev: 5059a445b94e70efa7d6c90c1b5e7aa755dfe1d7)
Change-Id: I576cddd8ae10edb222d45e5b4903ea7195def4d4
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Tyner (2):
ATTN:ti_handler Conditionally mpipl or quiesce
ATTN:ti_handler Add TI data to PEL
(From meta-openpower rev: e564a15415d26fcc54f047ac84748ede4605d7a8)
Change-Id: Ib06da770ff22f0dafc56dfd242b9bef396bfea39
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
As per latest yocto update, following error reported so fixing it.
URL: 'file://*.conf' has invalid parameters. file:// urls using
globbing are no longer supported. Please place the files in a
directory and reference that instead.
(From meta-facebook rev: 66b327f6b7b70c3ed3752ed89b9b18de463b3c36)
Change-Id: I3c1eca1f3fd3fb8acb6166cb3bfb8c8857cb09fc
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
As ASPEED develop their ast2600 u-boot features, we've had a need to
integrate changes from their tree into the openbmc tree. In the past
we lined this up with a major version bump (as with the kernel),
meaning we could create a new branch with our "out of tree" changes
applied on top. However, in this case their SDK is still based on the
2019.04 release, so there's not a clear way forward.
I've chosen to rebase the openbmc changes on top of their branch. The
old branch is still accessible at archive/v2019.04-aspeed-openbmc-1.
The bitbake recipe will continue to work as it uses the nobranch=1
flag, and specifies the version based on the SHA.
The new branch contains their aspeed-master-v2019.04 tree as of today,
with the OpenBMC changes applied on top.
The ASPEED changes include:
- support for the ast2400
- Disable of buggy AXI prefetch feature
- SPL, OTP and secure boot fixes
- SPI flash updates and calibration changes
- eMMC, Ethernet, fixes
I've boot tested it running from SPI NOR on AST2600 A1 hardware, as
well as QEMU, and it reached userspace. I will bump the bitbake recipe
to integrate the changes into openbmc.
Andreas Dannenberg (1):
spl: Make image loader infrastructure more universal
Chia-Wei, Wang (18):
config: ast2600: Enable board early initialization
ARM: dts: ast2600: Revert dm-pre-reloc property from eMMC
configs: ast2600-slt: Change DRAM speed to 1600Mbps
spl: fit: Separate FIT image load and processing
spl: ast2600: Fix the load buffer address
Revert "spl: fit: Separate FIT image load and processing"
Revert "add LPC/eSPI storngest Driving Strength"
configs: ast2600-slt: Add ENV default configuration
aspeed: Fix compile warning
ast2600: Remove AXI-prefetch support
wdt: ast2600: Fix reset mask setting
spl: ast2600: Add secure boot flow support
update bootflow
fix boots address
configs: ast2600-fpga: Fix defconfig and header
ARM: spl: Add SPL relocation support
spl: ast2600: Add relocation support
ARM: timer: ast2600: Add dynamic frequency detection
Chin-Ting Kuo (22):
spi: timing: Change timing calibration method
spi-flash: w25q01jv flash model support
spi-flash: aspeed: Remove unused variable
spi: Add w25q512jvfm flash model
boot: emmc: Boot from eMMC feature early porting
emmc: Move "u-boot,dm-pre-reloc" flag to evb.dts
spi-nor: Add flash model w25q01jvfim and fix typo
mmc: SD: Add property for timing phase and drive type
mmc: slt: Add timing phase and drive type for MMC
spi: cpuinfo: Add ABR, spi_aux_pin info
spi: crypress: Set 4B mode to controller when address width is 4
spi: AST2500: Modify ABR boot source log
spi: scu_info: Simplify scu info log related to fmc/spi
spi: ast2500: Porting spi1 setting
spi-flash: Set FMC04/SPIR04[6:4] when enter 4B mode
spi-flash: Use user mode under specific condition
spi-flash: Modify SPI/FMC CE1 default decode address
fpga: fixbug: Remove CONFIG_BOARD_EARLY_INIT_F
dp: Update dp base address
spi: bugfix: Do not change read command until flash probe
fmc: Set FMC50[1] for waiting WIP idle
eMMC: Do not fill FMC50[1] when boot from eMMC
Dylan Hung (18):
add rmii rclk oe control
add rmii rclk pin control
add board_ram_info for ast2600 series
move borad_add_ram_info to borad_common.c
fix FPGA RGMII pin setting
revise fpga mac device
fix typo
don't print message in sdramphy_init
write scu config back if vga config is "0"
refactor code: add macro for ECC setup
trim tailing whitespaces
don't re-init ecc if dram has been initialized
fix ncsi build
don't reserve VGA memory if efuse bit is set
fix fpga booting
add ast2650 fpga config
remove dram initialization from platfrom.S
remove mac init from platform.S
Joel Stanley (7):
dts: ast2600-evb: Enable FSI masters
aspeed: Add machine names
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
Johnny Huang (37):
otp: remove print process
otp: ignore data region last 2 dw when program
otp: program 2 dw then verify 2 dw when program data region
otp: skip print data info when no key
otp: set default value for otp strap programming
rng: add aspeed rng cmd
spl: fix duplicate define CONFIG_SYS_MONITOR_LEN
defconfig: cot: reduce spl code size
config: remove tftpput
secure boot: fix hace reset and compile warning
clk: rsa clock source set to hpll
update otp patch code
otp update
otp: udpate program
otp: udpate strap
otp: update strap program bit
otp: udpate strap read
otp: reduce the code
spl: ast2600: update secure boot flow
defconfig: ast2600: update spl config
spl: aspeed: fix ecc build
secure: update bl2 verify
secureboot: update bl3 verify
aspeed: emmc: support emmc boot
defconfig: support new boot flow
defconfig: rename ast2600a1 as defaut config
fix merge error
defconfig: aspeed: update ecc config for new boot flow
Revert "defconfig: aspeed: update ecc config for new boot flow"
defconfig: aspeed: update ecc config for new boot flow
otp: fix ast2600a1 info
defconfig: enable position independent to support boot from uart
config: enable CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK as default for ast2600
boot0: aspeed: add image size header for boot form sram
cmd: otp: udpate for ast2600a2
update ast2600a2 otp register setup
otp: fix compile warning and add strap info
Peter Robinson (1):
Remove redundant YYLOC global declaration
ryan_chen (40):
add link status
update gpio driver
fix i2c pinctrl
update sd/emmc controller source
update
add ibm platform
add kconfig for env
add ast2600 openbmc defconfig
fix env compile error
update pcie driver
mv to cmd/aspeed folder
update for mv cmd/aspeed folder
add pll test
update full test
update clk
add display port driver
add ast2600 defconfig
update mac info
update dp driver
update hclk setting
update axi ahb div cal
update dp firmwire
add more desciption about eMMC clk source
update file mode
update ast2400 have 32kbyte
add ast2400 ompatible
add ast2400
add reset for ast2400
add ast2400 include file
add ast2400 board
add ast2400 defconfig
add ast2400 pinctrl
update ast2400 reset
add ast2400 clk
add ast2400 defconfig
update ast2500
add mac for ast2400
add for ast2400
add ast2400 clk
Video format look-up table is updated for 640x480@85Hz
(From meta-aspeed rev: 9d5ae052312dc45a645dc5e7ab8a9daf4ef686d6)
Change-Id: I50a06ca91d86f4548d47e85e215ace4498c0c9a8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Bob King (2):
regulators: Add Services& services to classes
regulators: Modify Configuration to use Journal
Jay Meyer (1):
Enhance PSU tracing support - add device access info
(From meta-phosphor rev: 8b312c5e3178fcd2958e20e8edfe41efbe6d7464)
Change-Id: Ied6eda825df19d055d42fba372e3a356d78ac852
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
James Feist (1):
schema: add missing tags
(From meta-phosphor rev: e7bd80314650b6c96e216a5d1fb7b958c13f80bf)
Change-Id: Ife8c1780d9d088f6860a74af6a2c1b8bf54b939e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrei Kartashev (2):
FruDevice: use FRU Areas enum to iterate
FruDevice: parse more than 2 custom fields
(From meta-phosphor rev: 4b385685c90cace4f1183598fa30b257696cbd89)
Change-Id: Iae5c7f944de51eaa4cdc985058258d83a135994a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (1):
bootblock: ensure no power operation on block
(From meta-phosphor rev: fa674755ba254010f6d08efb01373808cefbb875)
Change-Id: Idd4da5efae4e9b20be87e3fdd62326f3130a2992
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Vijay Khemka (2):
Add unit to health sensor
Fix threshold checking
(From meta-phosphor rev: c6579a1a8454582d8e43d4e7660f47b661fb2827)
Change-Id: Ifbbace37c618ac2eb466f8a79eccbb54805728d2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Much like core-image-base, add a base OpenBMC image
obmc-phosphor-base-image.
This is essentially CORE_IMAGE_BASE_INSTALL +
packagegroup-obmc-apps-extras (which is empty by default).
At time of writing, obmc-phosphor-base-image is an abstract thing and
doesn't make any specific statement about content. The initial intent
is twofold:
1 - Provide a base image upon which space constrained users can "build up"
their image content by appending to IMAGE_FEATURES in place of the
current practice of "tearing down" obmc-phosphor-image by _remove-ing from
IMAGE_FEATURES (The Yocto layering implementation prefers appending over
_remove-ing for maximum layer compatibility).
2 - Over time, a carefully curated set of IMAGE_FEATURES would be added
(there aren't any at the moment) that provides content that most
users would expect by default.
(From meta-phosphor rev: fb768573bc58d020b63dba323cb0eb3afafd5e6d)
Change-Id: Id3b15ffd8084298a4784ad1b3c4004b2cb2f73e4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
VR temperature sensor names:
vddcr_cpu
vddcr_soc
vddio_abcd
vddio_efgh
p12v_mobo
p12v_fan
adm1272 temperature sensor name:
hotswap
Note:
Since adm1272 PMON_CONFIG didn't enable temperature monitoring by
default, add the driver patch to support it
(From meta-quanta rev: c680ebe0310ff72dd0811616830d22f5d5bfa108)
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Icb39c0827fe66faaa91d24b3fc93e15f53d21782
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The flags set by this bbappend are now handled automatically by the
phosphor-dbus-interfaces recipe.
(From meta-openpower rev: d82b45abb965acabc918076d60f9cb30b724eb5c)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ib295f807c539290b1a16f032c6b1f1a5901bbfd2
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The POWER CEC system device tree need reinitialize before doing
normal ipl to mark required targets as functional for ipling.
The service file is added in below patch.
https://gerrit.openbmc-project.xyz/c/openbmc/openpower-proc-control/+/36577
(From meta-openpower rev: 2257014de9964f673b4ae2864deffd25e6022cee)
Signed-off-by: Ramesh Iyyar <rameshi1@in.ibm.com>
Change-Id: I499ee3c6c2b4f3caf33609ca6e70112801d5cbae
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The functionality of this package was added as a part of `systemd-conf`
package. This package is no longer required.
(From meta-yadro rev: e5fb11c84f7455acff17efb79373e954afef1780)
Change-Id: Iee5368e0bcc60ccdb745323937ec5506ce3c1c4d
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This brings the default network settings for Tatlin as a part of
`systemd-conf` package.
These settings contain a predefined IPv4 address for eth0 interface,
keep the possibility of getting an additional IP address from DHCP.
VALN4004 with predefined IPv6 address is also kept.
(From meta-yadro rev: 56e7efa11a0b281f39d160cd99c84b7a95632205)
Change-Id: Ibb025a1ae519f0843bfcb8ec71e009e2bc97141f
End-User-Impact: - BMC now has predefined IPv4 address on the eth0.
- VLAN4004 also present and has predefined IPv6 address
- BMC is able to get a dynamic IP address on eth0.
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Use TATLIN Storage Controller BMC product ID
End-user-impact: The BMC is now properly identified via IPMI
using the Get Device ID command.
Signed-off-by: Alexander Amelkin <a.amelkin@yadro.com>
Change-Id: I51d2da6c844effa6478df87dd55609a976f48abd
(From meta-yadro rev: 59d7d9823b9e77b81f24d93cc5fb5b7e6e2e5187)
Change-Id: I70f17380aa3f87c3670cae2dbd1e5cb2980f7dde
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Zhikui Ren (1):
Add Zhikui Ren as maintainer
(From meta-phosphor rev: 6cc391520adcab8aa3e94c2fd7eb15a4293c569e)
Change-Id: I856e78364e1b91ab00cf333c3abadc5368bd1c4e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Josh Lehan (1):
gitignore: Adding more files to ignore
(From meta-phosphor rev: 448251270bad2f71d465249f8fd8f963c6fca5fb)
Change-Id: Ieb5869b6d3491570a53f7ce00fbe014994a9b111
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Patrick Williams (1):
test: timer: fix warning under clang
Wludzik, Jozef (1):
Remove regex match pattern from object_server
(From meta-phosphor rev: fe59860f422b0e09b11f1dc6f039de763a56c4b9)
Change-Id: I7ea4eb0bddfb52d136f2316cd5ea322613eb06e3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Chirag Sharma (1):
Unit test framework for phosphor-debug-collector
(From meta-phosphor rev: e364b2e39449b6c833b96bf1e3c123e80cd1b820)
Change-Id: I33ee0e10519ccc7142c013cef28b59db0503b68c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Chirag Sharma (1):
Unit test framework for phosphor-debug-collector
(From meta-phosphor rev: caa67ea3f56655c7d3054ec0b77a4dbd1252981d)
Change-Id: I72741361d9c3fe3034597ed33840ae7c9ec41409
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ed Tanous (1):
Add ed as reviewer of entity manager
(From meta-phosphor rev: 87f00af07c27fcd9a7c2ce27aa42ae5d0f1540bf)
Change-Id: If45701ecda7a0099a5f7b123e0f506951339ccec
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ed Tanous (2):
Add Ed back as a maintainer
Fix IBM management console to match coding standard
Jason M. Bills (1):
Update error_messages to Base 1.8.1
(From meta-phosphor rev: 884997a27cb6d1266e458d7d8ad928d7d47c5dc9)
Change-Id: I5e46d2295db0ecdd593ac171c697eb06216a90a1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Currently the op-wait-power-on service is started before power is
actually turned on. Ensure this service does not start until the
obmc-power-on-pre@.target completes.
The bootblock logic prevents the obmc-power-on-pre@.target from
completing when a blocking error or code update is occurring. Without
the fix in this commit, the system will not power on but this service
will fail because it is incorrectly started as a part of the
obmc-power-on-pre@.target.
(From meta-phosphor rev: 7773d935f6bb7680bb92212d0a58cebb097affd1)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ib2e339bb93af15ffddacb85d77db7ce22c8a5da1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This service already has a Before=obmc-power-start@.target which itself
runs before obmc-power-on@.target.
(From meta-phosphor rev: 84de9636c93b8b42f0120c8573586b4829b7600d)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ia51a8030cf7f97b9f9090fa1ec5c7266d8014382
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Jayaprakash Mutyala (1):
oemcommands: Fix for set security mode to mfg mode
(From meta-intel rev: 583615abb4594b452c51d9593e59c56fb5dd7256)
Change-Id: I845f02e85d1eddcb761f0c06c9ee826bdf1f3153
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|