Age | Commit message (Collapse) | Author | Files | Lines |
|
- Modify gsj-ipmid-whitelist.conf for the gsj project.
- Enable whitelist by default.
(From meta-quanta rev: 7f62bc2c5a71b9275b8b636dd6daad000288b2f4)
Change-Id: I52363809de53fabb0c6609e0bc564bdcd69c2e75
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
It is not yet supported in the kernel.
(From meta-ibm rev: 37b0344925323c3de0bd86fd00ea075e383153da)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ie09afb9a4ee1d96d7b2a70fe79ef9a85d8971ea2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
New features since v2.2:
- Support for using the SBE to read/write memory
- General SBE chip-op support
- Cronus backend
- Fixed for clang
- Default device-tree selection for applications
- Bugfix for newer OpenBMC kernels using alternate FSI paths
(From meta-openpower rev: 42f47f251fabfbc1c19d0616a429be48f6a6918d)
Change-Id: Id602f80f8fb87b3258c3b4d4bd72a5c2b3f6ecda
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This new service will monitor for default phosphor systemd targets and
log errors
Tested:
- Verified basic function in Romulus QEMU
- Verified no error logged during boot, bmc reboot, or power down on
witherspoon
- Verified when service fail injected, appropriate error was logged on
witherspoon
(From meta-phosphor rev: e36b727c20c433cc02a5e9415b7df867e8443512)
Change-Id: I8a3ab440f67f7e9b3a682d8645c34fa446a6119f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
With introduction of HIOMAP function, this is no longer needed
(From meta-openpower rev: 3f3edac739961e7d9f632d04a13450ee42456a4a)
Change-Id: I4fb7390938fd44ab38cf6f583adb7901a1ffe020
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add an empty entity map json file. The file is expected to be an array,
if it is present at all. The file provided by default has no real
meaning to your system, therefore you are expected if you use the entity
records, to provide one for your system.
See: https://github.com/openbmc/phosphor-host-ipmid/blob/master/scripts/entity-example.md
for details on how it should be formatted.
Currently formatted:
[{
"id": 1,
# Container entity contains other entities
# Entity Id and entity Instance for the container entity
"containerEntityId": 13,
"containerEntityInstance": 81,
# A record can have contained entities as a four entry list or as upto
# two ranges of entity instances; this record has contained entities
# as a four entry list
"isList": true,
# Records can be linked if necessary to extend the number of contained
# entities within a container entity; this record is not linked
"isLinked": false,
"entities": [
{"entityId1": 10, "entityInstance1": 1},
{"entityId2": 10, "entityInstance2": 3},
{"entityId3": 10, "entityInstance3": 5},
{"entityId4": 10, "entityInstance4": 7}
]
}]
(From meta-phosphor rev: 34d8886d6642eb0b991b696f4d28950c5bec9bf5)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I00956c92d444ac82d4a9aabfd33c26ccbb58e145
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable BIOS POST CODE functionality for NPCM7xx BMC in phosphor-host-postd.
We need to modify SNOOP_DEVICE = "npcm7xx-lpc-bpc0", due to default SNOOP_DEVICE is using aspeed BMC.
(From meta-phosphor rev: ae30116e34c5ee4a1a10ff877192a0a633d84e9f)
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I06e05d62a9c1b810620d3292b13e5a244851b061
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Utilize the pgood property as a precondition to loading fan control
events based on property states other than the OCC active events. Since
the OCCs are not active when powered off (pgood = 0) those events having
OCCs active as a precondition are not necessary to be added.
This is the first step to enabling fan control to run at BMC standby.
When the default phosphor-fan-control@.service starts after power on,
the pgood property value is already set to 1. Therefore this produces no
change in fan control activity.
Tested:
No change in fan speed control
(From meta-ibm rev: dadf39cdbb093e0c2566189f3e876dd3c01e13d0)
Change-Id: Ieb010804d59ed318463fca1fcbdce5b5123b81df
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the witherspoon-tacoma system. May bring this
back in some day for testing purposes but there are no near term plans
to use or support this.
(From meta-ibm rev: 3e11092404f8512241209c4ea26988171cf35263)
Change-Id: Ibb0bc351504070661179491d07f3af144cc97602
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainer power-on configuration support and remove unused GPIOs.
(From meta-ibm rev: 114bd7308d03fe7949517cd939b6dd9f575d59cb)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I29df80c5d446ebcba929cef334f06969c258f5d9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainier system power sequencer configuration file.
(From meta-ibm rev: 65ba7af3ef1f36b4b77c5776478b59d1a7bf2334)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Ia55257b24e1e5095bbd9db24fbf67e5968c4f9cc
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (1):
networkmanager: Correct the upstream version check
Adrian Ratiu (1):
renderdoc: add new recipe
Changqing Li (1):
kea: upgrade 1.5.0 -> 1.7.0
Denys Dmytriyenko (1):
rwmem: add recipe
Hongxu Jia (1):
lvm2: fix run lvcreate hung while PACKAGECONFIG udev
Jackie Huang (6):
python-versiontools: add recipes for python2 and python3
python-pymysql: add recipes for python2 and python3
python-statistics: add new recipe
python-pyperf: add recipes for python2 and python3
python-pika: add recipes for python2 and python3
python-pycurl: add recipes for python2 and python3
Khem Raj (6):
openipmi: Mark libOpenIPMI.so.0 as private lib in openipmi-perl
ttf-gentium: Use OFL-1.0 version of OFL license
ttf-hunkyfonts: Use LGPL-2.1 which is correct version from LICENSE file
python-configparser: Mark license as MIT
fontforge: Upgrade to 20190801 release
opensaf: Fix duplicate copies of shared libs in package
Martin Jansa (2):
spice: ignore all warnings not just address-of-packed-member
Revert "spice: Drop broken native"
Otavio Salvador (5):
networkmanager: Fix ADSL plugin packaging
networkmanager: Add a `resolvconf` PACKAGECONFIG
networkmanager: Add sysvinit support
libqmi: Upgrade 1.22.2 -> 1.24.0
modemmanager: Upgrade 1.10.0 -> 1.10.2
Qi.Chen@windriver.com (1):
protobuf-c: fix race condition
Robert Yang (2):
corosync: Fix PACKAGECONFIG flag for rdma
net-snmp: Fix PACKAGECONFIG for perl
Zang Ruochen (1):
python-urllib3: upgrade 1.25.5 -> 1.25.6
Change-Id: I20029cc79a225f6ab8f1b133ebc16129b7b32082
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the rainier system
(From meta-ibm rev: 556f78bc1a4c0d02496e79754fa6fa7147c98e02)
Change-Id: I79f19dca7024025efcbe25ac3a55df9bf047bcbb
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (1):
ARM: dts: aspeed: tacoma: Enable iBT device
Joel Stanley (1):
usb: gadget: Quieten gadget config message
(From meta-aspeed rev: 5d1af51495b016e385a6a2164d38770939226f11)
Change-Id: I78a4267d9a974b640acd07f5388e5885194cadf9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
Prevent excessive journal logging by wakeup signal
(From meta-phosphor rev: 6383ea303593962e9aea0504fa4abb55b10b371f)
Change-Id: I8b45dcb23faa410f1e391fc91b3d423f336e86de
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
PEL: Support for going between PELs & registry
(From meta-phosphor rev: 1c6191107ee506ac932f67a2af43ec1671944a72)
Change-Id: I390523465102091210f865b0389c13ceb1c591e5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Peter Lundgren (1):
Add more entity ids
(From meta-google rev: 5f6e2d2cf2227d026c72f845456c410c7a626439)
Change-Id: Iaf0b72a99ca5d2fb2abb9e5b8c3e7f6695078f1c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cédric Le Goater (3):
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
ARM: dts: aspeed: tacoma: Re-enable CS1
Ivan Mikhaylov (1):
watchdog: aspeed: add support for dual boot
(From meta-aspeed rev: 3369549492bf6b40f90cf14381ffc35e66250639)
Change-Id: Ia95b3ba3f1ba8a12d99660a458eb54cd2b1ddf73
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Fix Association interface
(From meta-phosphor rev: fcd89a6c6e0599059bfac3375a1f9a95efacb1f2)
Change-Id: I881e17dcce2ac20c9c598e8f63e7a7046279ae2b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Autojson all files
(From meta-phosphor rev: ac05b4ea06bfb76cccd3c303da7ba9deb669280a)
Change-Id: I9052ceb40598e1039a04e6731629e6abf9a60488
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ratan Gupta (1):
Remove the code which updates resolv.conf for dhcp supplied DNS
(From meta-phosphor rev: 4819265e8c6ff88d49aa25b4ecad3c7bb67e8702)
Change-Id: I2f3b12883a175057f18cf4d68328f7f11866bf55
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This system's GPIO layout is different than witherspoon's.
(From meta-ibm rev: e401c9560f4f7d85952d1630095df9ad784de0b2)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I4ed9f1de4b25258e791a514643863494a99fde3d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
jayaprakash Mutyala (1):
user_mgr: Adding priv-noaccess role
(From meta-phosphor rev: 7d4c8917ec4fa262d0b9e3987a24b767886534b9)
Change-Id: Ib6b4a28adff42c456c9473eeb1a96ecd085a81eb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (4):
PEL: MTMS class to handle the type-model and SN
PEL: Interface to collect system data
PEL: Move PEL section IDs into a header file
PEL: Add FailingMTMS PEL section class
(From meta-phosphor rev: 2a40b95b55d888e2b345df5a396a9463a6c2c735)
Change-Id: I1d6f26416b1695544afb5b7868ca170b56bf46ba
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (5):
cppcheck: Fix format string warning
cppcheck: Fix "Uninitialized variable" warning
cppcheck: Make settings constructor explicit
cppcheck: Reduce scope of temp variable
Make D-bus systemd error handling consistent
(From meta-phosphor rev: ab84fe29fb3140fabb3c796846fd5119980d667a)
Change-Id: If683d5d3c7d465bffb7a686efc559a966874c17f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (2):
Add flow control to prevent buffer over run
Remove frame rate limit
(From meta-phosphor rev: 1a115b92749bb063bd65cc2a7922513b91c82d1f)
Change-Id: Ic3a58ecd70add1b16ef25aa89a55147db6a1e91b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (1):
Update Callback role privileges
Yoshie Muranaka (3):
Fix rounded button styling
Change navigation submenu transition duration and ease
Fix SoL and KVM refresh bug
(From meta-phosphor rev: d67b31a1a92b241f9625bf08b1660da3572eaad6)
Change-Id: I019ca227182d729f1c60a42afbf44238b640716a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
When the openpower-pels packageconfig is enabled, add a DEPENDS for
nlohmann-json, as the openpower-pel code uses that.
(From meta-phosphor rev: e64bc0f26668b40b989824d215890b226c52d5ae)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I5280f90527baa634b8e8c32f4b52d0ec0e296279
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (3):
Remove endian swapping abstraction
targetting: Remove old sysfs path
Update sysfs paths to use /sys/class/fsi-master
(From meta-openpower rev: f9e31dbd85d95fd1f183a27965d0dab2db321c8e)
Change-Id: I9e99dca94b2cc697014e5b908edc81cf52e903b3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
witherspoon-pfault-analysis is promoted to phosphor-power:
https://lists.ozlabs.org/pipermail/openbmc/2019-August/017729.html
This patch does the first migration step which is to point this recipe
at the canonical repository.
A subsequent step could be adding a phosphor-power recipe in OpenBMC's
meta-phosphor.
(From meta-ibm rev: de9a39f0a56410de046a260b51ca7ff9f162b12c)
Change-Id: Ib6af976ac3b82d37f96dea4b45bba730ca98753d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Naveen Saini (1):
apparmor: suppress appending of installation to perllocal.pod
Scott Ellis (1):
ncrack: update to tip
Change-Id: I6c562bd1b9dd57c97bc242f7b678bac36cb5b947
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The u-boot SDK recipe in the Aspeed layer has different u-boot config
snippets for different sized flash images. This is done by way of
overrides, e.g.
MACHINEOVERRIDES .= ":flash-${ASPEED_IMAGE_SIZE_KB}"
Make sure ASPEED_IMAGE_SIZE_KB is set to the correct size so the correct
u-boot snippet is selected.
(From meta-phosphor rev: 2ee231638d5cde0c041ad863a4d4636291ad39a5)
Change-Id: I438fb896eceeafab2927925ffa1763d672456dd6
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The OpenBMC kernel g5 defconfig supports both g5 and g6. Use the g5
defconfig from the OpenBMC kernel unmodified, to enable kernels with
support for a variety of the devices found on the AST2600.
(From meta-aspeed rev: b456abfbb3ad8ccb3cad3f100d05f2764f7477cc)
Change-Id: I9b9e7f52a5e3d0c042b0e705a3c19228d78f8919
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
Fill in README section on D-Bus event creation
(From meta-phosphor rev: 182eaf694b6577d2da2c2e4875335310d898e5d6)
Change-Id: Id574617e5b0c39064c56187963ecfae67ddf3e0d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chen Yugang (1):
Bug fixing for boot option
Patrick Venture (15):
sensorcommands: add map header
storagecommands: pass by reference
storagecommands: add functional header
sensorcommands: zeroize some ints
manufacturingcommands: pass string by const ref
bugfix: smbiosmdrv2handler: sizeof(pointer)
smbiosmdrv2handler: drop unused vars
sensorcommands: add optional header
sensorcommands: add utility header
sensorcommands: add cstring header
sensorcommands: add variant header
sensorcommands: add algorithm header
sensorcommands: add memory header
sensorcommands: add array header
sensorcommands: add stdexcept header
Richard Marian Thomaiyar (2):
intel-ipmi-oem: Replace yield with ctx for mfg cmd
intel-ipmi-oem: Fix special mode path
jayaprakash Mutyala (1):
storagecommands: move Read and Write FRU data
(From meta-intel rev: 18a346e8082b755b250e0a510b7783eb32882799)
Change-Id: I87c38ec38f7ce69fbe9ba43614873fdb3c519c5e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set the flash size so we get 128MiB images.
Remove INITRAMFS and IMAGE_FSTYPES overrides so we get the standard
phosphor images.
(From meta-ibm rev: 1c12470b1ea14d6b043e0b214e800b974d10a36d)
Change-Id: Ic941879b882aae809693a7901f3af95d23db5d05
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Rainier is a POWER system with an ast2600.
Build instructions:
TEMPLATECONF=meta-ibm/meta-witherspoon/conf . oe-init-build env
MACHINE=rainier DISTRO=openbmc-openpower bitbake obmc-phosphor-image
(From meta-ibm rev: 4c39d65a0b5678042a96324197c37478d81d6d4a)
Change-Id: I4bf5424d99ea643f7262ae17c962d2b7dd280076
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Callaghan, Dan (2):
firewalld: add UPSTREAM_CHECK_URI
add new recipes for python-lrparsing, python3-lrparsing
Khem Raj (2):
mongodb: Remove non building arches from COMPATIBLE_HOST
uim: Fix cross-builds
Martin Jansa (1):
libmicrohttpd: backport the fix for building with older gnutls
Oleksandr Kravchuk (4):
libyui: update to 3.6.0
libyui-ncurses: udpate to 2.52.0
sanlock: update to 3.6.0
tesseract-lang: update to 4.0.0
Randy MacLeod (1):
crash: update from 7.2.6 to 7.2.7
Robert Yang (8):
python-asn1crypto: extend to nativesdk
python-incremental: Drop broken nativesdk
fuse: Fix installed-vs-shipped for nativesdk
keyutils: Fix installed-vs-shipped for nativesdk
libnet-ssleay-perl: Drop broken native
libnet-dns-sec-perl: Drop broken native
iperf3: Drop broken native
spice: Drop broken native
Trevor Gamblin (1):
haveged: upgrade v1.9.4 -> v1.9.6
Zang Ruochen (5):
xterm: upgrade 348 -> 349
python-cmd2: upgrade 0.9.16 -> 0.9.17
python-protobuf: upgrade 3.9.1 -> 3.9.2
python-alembic: upgrade 1.2.0 -> 1.2.1
python-paste: upgrade 3.2.0 -> 3.2.1
Change-Id: I4491ea47f5e54f4f3843a77c720d0a89304c36a5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Anthony Wilson (1):
bmcweb: Add Threshold properties to Sensors
(From meta-phosphor rev: 55a9e8474263226e0442730a03f08ccdb60bbe36)
Change-Id: I623ef0d8a435038421c6c26759b26c3a5c786f1a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Dixsie Wolmers (1):
Improve LDAP accessibility
beccabroek (1):
LDAP configuration and user groups
miramurali23 (1):
Update users navigation section
(From meta-phosphor rev: ececc0de4b8dc12da4eef51d0752aad81b4819de)
Change-Id: I4225735f7c656ec25f08eb1d008a98c8329fbd27
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (1):
Fix OperationalStatus disappear problem
(From meta-phosphor rev: 40dc69715299a98185e14f8350a7ac4d503eb7cc)
Change-Id: Iccf391efc15414d4edf2139ac65e2cfe17f510c9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a config snippet that sets CONFIG_BOOTCOMMAND to the correct address
on 128MiB flashes.
This requires a refresh of the u-boot sdk patch we've been carrying such
that CONFIG_BOOTCOMMAND is set conditionally if not set previously.
(From meta-aspeed rev: 4c8b1d729b5b21c93685cd1b1bdde05afa81f9e8)
Change-Id: I7dece4bcee6d68a0367fcf4eafb78f0db3e4e4f8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add an override based on FLASH_SIZE, for use with the hardcoded offsets
that exist when building raw flash images.
This lets us have different flash layouts for different size flash
modules that can be shared between machines.
The existing 32MiB layouts are unchanged:
partition: size: offset
u-boot: 384 KiB (0 KiB)
u-boot-env: 128 KiB (384 KiB)
kernel/FIT: 4352 KiB (512 KiB)
rootfs: 23808 KiB (4864 KiB)
rwfs: 4MiB (28672 KiB)
The new layout is as follows:
partition: size: offset
u-boot: 896 KiB (0 KiB)
u-boot-env: 128 KiB (896 KiB)
kernel/FIT: 9 MiB (1 MiB)
rootfs: 86 MiB (10 MiB)
rwfs: 32MiB (96 MiB)
(From meta-phosphor rev: 9e84ca2ad4aa7f864bb53faa6f21ae580d64d07d)
Change-Id: I4edf302d4e738b31906cd03459ad6f2f44c3c749
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
pinctrl: aspeed-g6: Sort pins for sanity
pinctrl: aspeed-g6: Fix I2C14 SDA description
ARM: dts: aspeed-g6: Fix EMMC function in pinctrl dtsi
ARM: dts: aspeed-g6: Add pinctrl properties to MDIO nodes
ARM: dts: ast2600-evb: Add pinmux properties for enabled MACs
ARM: dts: aspeed-g6: Add missing pinctrl-names property to I2C nodes
Johnny Huang (9):
pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
pinctrl: aspeed-g6: Fix UART13 group pinmux
pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config
pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux
pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file
pinctrl: aspeed: Use masks to describe pinconf bitfields
pinctrl: aspeed-g6: Add AST2600 pinconf support
(From meta-aspeed rev: 804acc0d24767e150f25b56379c9664cafdd4b37)
Change-Id: I8255855478addca2b659d318e7e6e8eb970608b4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Without kmod, the udev daemon is unable to run builtin kmod operations
for loading modules on demand. This breaks automatic loading via
modalias, meaning hotplugged USB devices won't have their modules
loaded.
(From meta-phosphor rev: 1b024a64b7a12b075556f19030a26182f2951a9c)
Change-Id: I32293fa5c206830eb3cfa84a0582db71886dd030
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
meta-openpower has hard dependencies on oe-core, meta-phosphor and
meta-aspeed. Express those in layer.conf so users can get a helpful
error message if they are missing a required layer from their layer
configuration. Generally users will look here for this information here
as well, so it helps to have it here.
(From meta-openpower rev: b1c327664fed9dfddc2e67c09831af72b3cf1fea)
Change-Id: Icadfe6a62343963c9c53184a4504b388512c6338
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add words to the layer README. The existing README is somewhat terse.
Expand it some, adopting some of the conventions from other well-known
OE BSP layers (used meta-freescale as a template).
Briefly describe the goal of the layer. The goals mention full
implementations for OpenPOWER reference platforms, which doesn't match
reality today; however, the current plan/thinking is to consolidate the
meta-foo layers for each reference platform into meta-openpower.
Added layer dependencies. meta-openpower depends on oe-core,
meta-phosphor and meta-aspeed.
Add contributing guidelines and style guide.
(From meta-openpower rev: 259c9bad006ecdc814f5d9dbd0b718ca5559fb1e)
Change-Id: I737ac1960fe2e3ba38994e9a9c36c95de19f7746
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
dt-bindings: clock: Add AST2500 RMII RCLK definitions
dt-bindings: clock: Add AST2600 RMII RCLK gate definitions
clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
clk: ast2600: Add RMII RCLK gates for all four MACs
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces
Brad Bishop (9):
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: Add 128MiB OpenBMC flash layout
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices
Cédric Le Goater (12):
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
ARM: dts: aspeed-g6: Add FMC and SPI devices
ARM: dts: aspeed: rainier: Enable FMC and SPI devices
ARM: dts: ast2600-evb: Enable FMC and SPI devices
Joel Stanley (3):
ARM: dts: aspeed: tacoma: Enable FMC and SPI devices
ARM: dts: aspeed: ast2600evb: Use custom flash layout
ARM: dts: aspeed: tacoma: Disable CS1 as it is broken
(From meta-aspeed rev: 6f2dd84f3f30c9777ce956d5ad56de7d04bb227c)
Change-Id: I774fa833665c5d84cf58df5cd7315cadaf56754b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Anyone using OE-core after 95823b7eab is using the OE-core provided tune
and not ours. Drop our redundant tune file.
(From meta-aspeed rev: 5894fc514daad03f70ada285a6b37947e1fb116e)
Change-Id: Ice99855d7655f926832943f6944279a0d21de5a7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
John Wang (1):
Drop support for old association interface
(From meta-phosphor rev: 0407c06bc6b62d6b790944170eee95be60030741)
Change-Id: I79f96a8119e9bdc48be19e624568e1045341c1e9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|