Age | Commit message (Collapse) | Author | Files | Lines |
|
Update `_google-layer` to `:google-layer`.
Change-Id: I3443c265aa3ff3bb711f65c016942bfd53ecf153
Signed-off-by: Willy Tu <wltu@google.com>
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
Signed-off-by: Zhenfei Tai <ztai@google.com>
Change-Id: I10ca13b80eaa9259a72c1d1957bebe2fb2eb2978
|
|
Signed-off-by: Jie Yang <jjy@google.com>
Change-Id: I98f40cbbb412028330201d174e9624410529d1f6
|
|
```
convert-overrides.py meta-google
git grep "_[a-z0-9_/-]*[ :]" -- meta-google | grep ".bb"
git grep -l _gbmc -- meta-google | grep ".bb" \
| xargs sed -i 's/_gbmc/:gbmc/'
git grep -l _prod -- meta-google | grep ".bb" \
| xargs sed -i 's/_prod/:prod/'
git grep -l _dev -- meta-google | grep ".bb" \
| xargs sed -i 's/_dev/:dev/'
git grep -l _hoth -- meta-google | grep ".bb" \
| xargs sed -i 's/_hoth/:hoth/'
git grep -l _bandaid -- meta-google | grep ".bb" \
| xargs sed -i 's/_bandaid/:bandaid/'
```
Some small fix includes
```
platforms_gbmc_bringup
platforms_gbmc_secure
```
Tested:
```
$ git grep "_[a-z0-9_/-]*[ :]" -- meta-google | grep ".bb"
meta-google/recipes-connectivity/avahi/avahi_%.bbappend:do_install:append:gbmc() {
meta-google/recipes-core/dropbear/dropbear_%.bbappend:do_install:append:gbmc:dev() {
meta-google/recipes-core/dropbear/dropbear_%.bbappend: echo ' chain gbmc_br_pub_input {' >>"$rules"
meta-google/recipes-extended/libconfig/conf2struct-native_git.bb: oe_runmake checker
meta-google/recipes-extended/libconfig/conf2struct-native_git.bb: oe_runmake install
meta-google/recipes-extended/networking/mstpd_git.bb:do_install:append() {
meta-google/recipes-extended/networking/sslh_git.bb: oe_runmake distclean
meta-google/recipes-extended/networking/sslh_git.bb: oe_runmake sslh-conf.h
meta-google/recipes-extended/networking/sslh_git.bb: oe_runmake install
meta-google/recipes-google/ipmi/ipmi-fru-sh.bb:do_install:append() {
meta-google/recipes-google/ncsi/gbmc-ncsi-config.bb:do_install:append() {
meta-google/recipes-google/networking/gbmc-bridge.bb:do_rm_work:prepend() {
meta-google/recipes-google/networking/gbmc-bridge.bb: # HACK: Work around broken do_rm_work not properly calling rm with `--`
meta-google/recipes-google/networking/gbmc-ip-monitor.bb:do_install:append() {
meta-google/recipes-google/networking/gbmc-iperf3.bb:do_install:append:dev() {
meta-google/recipes-google/networking/gbmc-iperf3.bb: echo ' chain gbmc_br_pub_input {' >>"$rules"
meta-google/recipes-google/networking/gbmc-mac-config.bb:do_install:append() {
meta-google/recipes-google/networking/network-sh.bb:do_install:append() {
meta-google/recipes-google/ssh/authorized-keys-comp.bb:SUMMARY = "Compiles a set of authorized_keys files into a single file"
meta-google/recipes-google/ssh/authorized-keys-comp.bb:do_install:append() {
meta-google/recipes-google/systemd/gbmc-systemd-config.bb:do_install:append:dev() {
meta-google/recipes-google/test/test-sh.bb:do_install:append() {
meta-google/recipes-phosphor/flash/inplace-gbmc-update.bb:do_install:prepend:dev() {
meta-google/recipes-phosphor/host/phosphor-host-postd_%.bbappend:do_install:append:gbmc:dev() {
meta-google/recipes-phosphor/initrdscripts/obmc-phosphor-initfs.bbappend:do_install:append:gbmc:dev() {
meta-google/recipes-phosphor/initrdscripts/obmc-phosphor-initfs.bbappend:do_install:append:gbmc:prod() {
meta-google/recipes-phosphor/ipmi/phosphor-ipmi-config.bbappend:do_install:append:gbmc() {
meta-google/recipes-phosphor/ipmi/phosphor-ipmi-config.bbappend: overlapping="$(jq '."${GBMCBR_IPMI_CHANNEL}" | .is_valid and .name != "gbmcbr"' $chjson)"
```
Change-Id: I9d610c664bd44e8bd81fb8f7e76249a0b43b9ffd
Signed-off-by: Willy Tu <wltu@google.com>
|
|
This is not used in the installed output and is breaking the build
non-deterministically.
Change-Id: I3f7193e9f0aac5e5cdcd45d4c736c3d31bb2858b
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Ran `scripts/contrib/convert-overrides.py` from upstream Yocto and
fixed up a few by hand that were missed.
Tested: Built bletchley and tiogapass.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I0489ba007132901697e4ef1a29b03a3591b3ee3b
|
|
This switches from the CMake build to the meson one.
Change-Id: I24ca927bcb02ca60250400ae44266b72911c0737
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
William A. Kennington III (3):
sel_logger: Fix temporary int creation
sel_logger: Annotate unused variables
build: Add meson
Change-Id: I81ba810121c92b94aeff2cb3678d18237e09829a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Currently the build will break if the patch already applied
as the return value of "test ! -f $@" is not 0, so make sure
to return 0 if the patch already applied.
Fixes:
$ bitbake perl-native
Make a change as below
$ git diff
diff --git a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
index b77bbd1fd4..4c5e35ab80 100644
--- a/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
+++ b/meta/recipes-devtools/perl-cross/perlcross_1.3.6.bb
@@ -33,6 +33,7 @@ do_compile () {
do_install_class-native() {
mkdir -p ${D}/${datadir}/perl-cross/
cp -rf ${S}/* ${D}/${datadir}/perl-cross/
+ echo "test" > ${D}/${datadir}/perl-cross/testfile
}
$ bitbake perl-native
NOTE: make -j 40
make crosspatch
make[1]: Entering directory '/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0'
test ! -f cnf/diffs/perl5-5.34.0/posix-makefile.applied && (patch -p1 -i cnf/diffs/perl5-5.34.0/posix-makefile.patch && touch cnf/diffs/perl5-5.34.0/posix-makefile.applied)
test ! -f cnf/diffs/perl5-5.34.0/dynaloader.applied && (patch -p1 -i cnf/diffs/perl5-5.34.0/dynaloader.patch && touch cnf/diffs/perl5-5.34.0/dynaloader.applied)
make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/posix-makefile.applied] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:64: cnf/diffs/perl5-5.34.0/dynaloader.applied] Error 1
make[1]: Leaving directory '/build/tmp-glibc/work/x86_64-linux/perl-native/5.34.0-r0/perl-5.34.0'
make: *** [Makefile:78: all] Error 2
(From OE-Core rev: 354163db5588d87941f53a2763be62b2430cc1fc)
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit dd5ebf4fdd3ccbe937001a777ad7fcc1e1319e94)
Change-Id: I5ff726eb777d5efcfe0cab7364763c646cab1ecb
|
|
Modify i2cool_1 sensor UCT to 75C according to thermal
requirement
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I48fb5cada8e893688e450207985fe8466119bb3b
|
|
These files sometimes get checked into the repo and we don't want
non-determinism around their generation. Ensure they are cleaned up and
regenerated for every build since that is very fast.
Change-Id: If20c79f8308c117a20983c8cb54c3420d872d64b
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Using IMAGE_INSTALL in mtjade.conf makes other Ampere recipes not
included in the build. This commit fixes the issue by enabling the
mtd-utils in OBMC_IMAGE_EXTRA_INSTALL_append instead.
Tested:
1. Check if all Ampere services and scripts available.
2. Check power control operations
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I17293ba520c05a7b5a438767c790f00220156d3f
|
|
Uptream moved from PCRE to PCRE2
Change-Id: I62434762a7e0485f4fe49ad6f181290cf6d34844
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Change-Id: Ia4843efa02ed9f3f7587580e4cb83711054637cb
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
PriyangaRamasamy (1):
Vpd-tool defect fix:data not shown for primed objects
Change-Id: I1bdfc7ddc5126817ddc47d0cacf936442dc6dc62
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Willy Tu (1):
Revert "config: update the dbus-sdr flag to remove underscores"
Change-Id: Ib085cbad635d90dab53614eea48e556d3db4c5bb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Lukasz Kazmierczak (1):
Extending meson build system to support fast compilation during development stage
Change-Id: I1d8a22ded36c5003a8feb879ed7940308d1bb239
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ed Tanous (2):
Enable pycodestyle
Rearrange mtls code
Ravi Teja (1):
Fix PATCH on hypervisor IPv4Addresses
Change-Id: I02412dc678c46bef52f7b9056f758f0d76b14b9d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Paul Fertser (1):
docs: guide: fix broken links to guidelines and customization
Change-Id: Ibbd6e916d2761944eef1fd90b5eca4cc76b94916
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Geissler (1):
make pldmd a dbus systemd service
George Liu (2):
Remove getBitfieldCount method
Fix enum_attrs.json error
Manojkiran Eda (1):
Owners file for pldm
Pavithra Barithaya (2):
BMC RR : Read and update the status for BMC reset
PLDM: Implement host-condition interface
Sampa Misra (1):
Avoid redundant entity association PDRs after merge
sampmisr (1):
BMC RR: check whether the Host is running
Change-Id: I137c88f92c70898a1f71b8c566db436532a6ef11
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Add recipe for bringing up USB ECM network devices.
The recipe generates
* network configuration file for the interface;
* systemd service that starts(stops) the USB Gadget
The ECM gadget, as well as the network interface are expected
to be fully configured in the bbappend file.
Signed-off-by: Maksym Sloyko <maxims@google.com>
Change-Id: Ibb57584ce2bfd838e650eae7a4d3935c9580e502
|
|
Specific patch for bletchley only
Change-Id: Ic059caf023a305e137a01fda5b9cc6e6d9299849
Signed-off-by: Howard Chiu <howard.chiu@quantatw.com>
|
|
The OCP module in Mt.Jade platform supports the GPIO pins to set the
power state. The SPI0 module also supports the GPIO pins to config SPI
mode. These gpio pins have to be set to the right states before power
off/on. The mtjade-gpio-config package will support that.
Tested:
1. Power off/on the host.
2. The OCP and SPI0 gpio pins should be in the corrected states.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: I46bca50222b0428f73aa9c05003f650f6ec0cc0b
|
|
The power functions are failed to work. There is one mistake in
merging ampere_power_utils.sh script. This commit fixes the mistake.
Tested:
1. Power off the host when it is on.
2. The host state should be changed to off.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Iaa253e4b8d0f645a2b7097501e8c602d693cb37a
|
|
When BMC boots, phosphor-host-check uses the software interfaces(IPMI
inband Hearbeat command or PLDM interface) to verify the host state
and creates the host on indicator file. Ampere Altra SoCs do not
support those software interfaces. They use the GPIO interface. GPIO
pin S0_FW_BOOT_OK go high when the host is on. This commit appends
ampere-reset-host-check@.service to phosphor-state-manager This
service will replaces the role of phosphor-reset-host-check@.service.
Tested:
1. Boot up BMC with the host is off/on.
2. Verify the CurrentHostState.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ie4f73538266fff7d8c5fd40b437ffebc82cb12c5
|
|
When phosphor-state-manager handles the power action to turn on the
host, phosphor-state-manager does not use the software interfaces to
verify the host state. It set the host state to running after all of
required services of the power action target are done. The power on
watchdog is used to verify the host state and handle the failure in
the host state changing. But Mt.Jade platforms do not handle power on
watchdog. This causes the CurrentHostState dbus property is Running
before the host is ready.
In Mt.Jade platform, the SCP drives S0_FW_BOOT_OK to high when the
host is already on. This GPIO can be used to identify the host state.
One service should be added to the required list. This service checks
the host state in power on and triggers obmc-host-quiesce@%i.target
when the host is failed to boot. ampere-host-check package adds
ampere-host-on-host-check@.service for that purpose.
Tested:
1. Boot up BMC with the host is off/on. Check CurrentHostState.
2. Call Ipmitool power off/on. Check the CurrentHostState.
3. Call Ipmitool chassis power off/on. Check the CurrentHostState.
4. Call Ipmitool power cycle. Check the CurrentHostState.
5. Call Ipmitool chassis power cycle. Check the CurrentHostState.
6. Power off the host. Set power policty to Always-on. AC power.
The host should be on. And CurrentHostState should be Running.
7. Power on the host. Set power policty to Always-off. AC power.
The host should be off. And CurrentHostState should be Off.
Change-Id: I9b0b346883a5f0203bf078453065c18ae4603311
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
|
|
ampere-hostctrl package includes the generic codes and the platform
specific codes. The generic sources are applied for all of the Ampere
platforms, they are the service files and the scripts to setting the
GPIO pins. The platform specific sources are the GPIO pin config file
and the gpio monitor config files.
This commit moves the platform specific files to the platform code.
Tested:
1. Do the power control actions use ipmitool, BMC web and Redfish.
2. Make sure the server states are changed as expected.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ic0e261109f7a5dfaf38c883bff0afedab763a0b6
|
|
Refactor the Mt.Jade Host power control operations to support Altra
CPU following the Altra SoC BMC Interface specification which still
satisfying the OpenBMC power control framework.
Tested: check the below cases and ensure Host state report correctly:
1. Run "reboot" from Host Linux. Check the Host is graceful
shutdown, then SYS_RESET is asserted and the Host is booted.
2. Run "shutdown" from Host Linux. Check the Host is graceful
shutdown then the chassis power is turned OFF.
3. Run "ipmitool chassis power soft". Check the Host is graceful
shutdown
4. Execute Redfish GracefulShutdown. Check the Host is graceful
shutdown then the chassis power is turned OFF.
5. Execute Redfish GracefulRestart. Check the Host is graceful
shutdown then turned ON.
6. Check other IPMI chassis power and Redfish Reset actions work.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: I3a9716f37d7e80bdc1a1d0422e561c8fc51ad040
|
|
UEFI firmware for Ampere Altra-based platform starts at offset 0x400000
but currently the firmware image is flashed start at offset 0. This
makes the Host fail to boot.
This commit supports offset option for the mtd-util's flashcp utility
and update the script to flash UEFI firmware starting at offset
0x400000.
Tested:
1. Turn on the Host.
2. Flash UEFI firmware. Wait for the flash complete and check if Host
can boot successfully.
4. Turn off the Host.
5. Flash UEFI firmware. Wait for the flash complete.
6. Turn on the Host and check if Host can boot successfully.
Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I0d48bfd0a7b7350b46a98bf10fe4de3887f09f02
|
|
The current ampere-hostctl package removes the power off/on services
of phosphor-state-manager and uses Ampere services. This solution is
not correct. Ampere platform should use power control functions of
phosphor-state-manager. And only appends or overides the default
services by Ampere's services if need.
By default, to handle power soft action, phosphor-state-manager will
trigger obmc-host-shutdown@0.target. This target then call
xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service to request OS
shutdown. When the host OS shutdown is already done, the target will
trigger obmc-chassis-poweroff@0.target to turn off the chassis. The
default xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service uses
Ipmi inband to communicate with the host. It is different with Ampere
Mt.Jade platform. We use the GPIO pin SHD_REQ to request shutdown the
host OS. The host will trigger SHD_ACK when shutdown is done. So
*.Ipmi.Internal.SoftPowerOff.service will be overide by Ampere service
named ampere.*.Ipmi.Internal.SoftPowerOff.service. This service will
trigger SHD_REQ pin and wait for SHD_ACK before start
obmc-chassis-poweroff@0.target.
This commit removes ampere-chassis-poweroff, ampere-host-shutdown
serives which handle power off/soft actions and restore
phosphor-state-manager's services. It also supports
ampere.xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service which
will overide xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service.
Tested:
1. Create "power soft" actions use ipmitool, redfish and BMC web.
2. Make sure the power order will be shutdown the host then power
of the chassis.
3. Create "power off" actions use ipmitool, redfish and BMC web.
4. Make sure the power action will be power off the chassis.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ibc0dc8c62408e8282520c9b70e41ab75c10137f6
|
|
Ampere Mt.Jade power control involves different action during the
course of action which does not involve rebooting the Host. Thus
disable the use of Host Power-On watchdog.
Tested:
1. Power on host.
2. In bmc console call "journalctl -f".
3. "ipmitool power reset" make sure there are no
phosphor-watchdog messages.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Iaedd120f203b4222bf57e5fbdc7be84cd22d2e2e
|
|
Tejas Patil (1):
Network: Add support for MTU propery
Vijay Lobo (1):
PEL.Entry: Add Subsystem property
Willy Tu (1):
Drive: Add Drive Type for Item.Drive Interface
Change-Id: Iaa16ee058b8231a9d463d6e86584b6aac8720b09
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Lei YU (1):
core_manager: Handle dbus exceptions
Change-Id: I7071c6a2ae409e7272dbecd0f578a36f320127ac
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Shawn McCarney (1):
PEL: Add regulator phase faults to registry
Change-Id: Ic986026fd0ef92150d6918940df7b53d0daf6cc6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayanth Othayoth (3):
PHAL: Helper function to set PDBG_DTB
PHAL: added createPEL wrapper function
PHAL: refactoring common_utils
Change-Id: Iddd4a1480ce548014927700c5b4624a80a3465d2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Derick Montague (1):
Resovle POST code logs missing page message
Change-Id: I41d908b76705429522c7d683c00088e96cd75c19
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Jeffery (7):
meson: nlohmann/json has a meson build
meson: Rework valijson subproject dependency
test: fru-utils: Exercise the FRU checksum algorithm
FruUtils: Rework calculateChecksum() implementation
FruUtils: Avoid truncation in derivation of fruAreaSize
subprojects: valijson: Update to v0.4
docs/my_first_sensors.md: Fix example busctl invocation
Avenash Asai Thambi (1):
legacy.json: Add vout9 to vout17 max and min support
Bruce Mitchell (1):
Support the PCIE_x_Temp Sensors for Everest
Ed Tanous (1):
Revert "meson: nlohmann/json has a meson build"
Rashmica Gupta (2):
Units: add enum for valid unit types
schema: add restricted range for severity
Change-Id: Id5e698ba320dffa617ae2a821412e2b70e85a2dc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (1):
raw: Fix for single element containers
Change-Id: Ie346fde7958db951abac5591a431bacda97fca61
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zane Shelley (3):
Moved chip data XML schema to subdirectory
Chip Data file updates for PAU, NMMU, and PCI FIRs
Chip Data file updates for TP_LOCAL_FIR
Change-Id: I88be20c7dd1a2d2dfed67dc1b41882f8f170c551
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ben Tyner (2):
Attn: Change dump request parameter to integer
Set environment variable for PDBG_DTB
Zane Shelley (3):
Sync P10 2.0 RAS data to P10 1.0
RAS data file updates for TP_LOCAL_FIR
meson updates to install RAS data files
Change-Id: I966551b4b529ecfc2d7cbd824a43fcd16e21ac4c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Arun Lal K M (1):
Add depex support in bios.xml parsing.
Johnathan Mantey (1):
Make sensor/sdr list commands work on systems with > 255 sensors
Change-Id: If9eb5844ea4c1e3366cf8addee7c8d24102cbf8d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zane Shelley (4):
RAS Data file definition and JSON schema
RAS data files for Explorer 1.1 and 2.0
Initial RAS data files for P10 1.0 and 2.0
RAS Data file updates for PAU, NMMU, and PCI FIRs
Change-Id: I8897e15daaa3d2832c29e49c8e02c27ca8424c86
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Vernon Mauery (3):
replace tuple-based singleton with individual singletons
make internal command functor match external
Add Get Channel Cipher Suites Command
Change-Id: I59d12442e750b384ad7212b4064df36f1711cbc1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Adriana Kobylak (5):
functions: Parse json file to set bios attr table
functions: bios-attr: Check that PLDM is running
functions: bios-attr: Add match for entity manager
functions: bios-attr: Add match for PLDM
functions: Create symlinks for hostfw elements
Add nlohmann-json as dependency since json parsing has been added.
Change-Id: I456e4b49e47c376e8f398a4a95590b72be122e21
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Brad Bishop (1):
meson: add missing nlohmann dependencies to tests
Change-Id: Ia6433bbf90c058837e215c518d557a3a5345f2e2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Gunnar Mills (2):
Correct Manager LogService Collection permission
Fix System EventLog Collection permission
Konstantin Aladyshev (1):
Support new boot override setting design
P Dheeraj Srujan Kumar (1):
Fix Klocwork Issue - Dereferencing iterators
Change-Id: I5cea0b3f8c964301cfaa523daf503574ab82d899
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Konstantin Aladyshev (2):
Support new boot override setting design
Support new boot override setting design
P Dheeraj Srujan Kumar (2):
Fix Kloxwork Issue : NULL check after new
Restructure pam conversation function(Klockwork fix)
Scron Chang (3):
dbus-sdr: Add sensor event type to sensor
dbus-sdr: Add new sensor type codes
dbus-sdr: Add hybrid sensors stack option
Snehalatha Venkatesh (1):
Move SecureString class to ipmid/types.hpp
Tony Lee (1):
Fix issues and support signed sensor values
Vernon Mauery (1):
Revert "Support new boot override setting design"
Willy Tu (3):
dbus-sdr: set settable state to true if sensor write is enabled
config: update the dbus-sdr flag to remove underscores
dbus-sdr: disable [sensor/storage]handler builds when using dbus-sdr
Change-Id: I9a9ee06ed31f0d1dc1498f0585bb30bef7c32c10
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Added
1. phosphor-state-manager
2. ampere-hostctrl
3. Nuvoton chip and skeleton GPIO support in obmc-libobmc-intf
5. obmcutil support
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I2628a0cab35a9be5afd702cc6269932c0c901e6a
|
|
For gbmc override, add inplace-gbmc-update and set it as the
PREFERRED_PROVIDER for virtual/bmc-update.
Google-Bug-Id: 179618452
Google-Bug-Id: 179618500
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: If8b7a3640b66fd323ee5c1a98619a09463933898
|