Age | Commit message (Collapse) | Author | Files | Lines |
|
When the last round of reviews added -e to the bash statement, it
exposed a slight flaw, in that when there aren't failures, grep will
return a code if it's not able to find any matches.
This commit changes that such that grep errors are "ignored" in the
context of bash.
Tested:
ran run-repotest.sh on a clean repository, and observed "repo test
passed"
Signed-off-by: Ed Tanous <edtanous@google.com>
Change-Id: I716220652d48b9a8489bf4dc0c3b4734b98a70e4
|
|
After over a year of discussion, Redfish released new power and thermal
schemas as part of the Redfish 2020.4 release.
These new powersubsystem, thermalsubsystem, fan, powersupply, etc
schemas can co-exist with the old power and thermal schemas.
The old schemas and the new schemas are controlled by different options.
The current plan for bmcweb is:
1. Until the new schemas are all in and tested, as a default, enable the
old schemas and disable the new.
2. After the new have been in and tested, enable them. This means the
old and new will co-exist if running the defaults. The sensor
collection behavior will reflect the new schemas, that is all sensors
can be found under the sensor collection.
3. After an OpenBMC release, at a later time, disable the old and add
appropriate deprecation.
This change here, enabling the new schemas, jumps meta-ibm to #2.
This reflects our desire for our Redfish clients to start using the new
schemas.
Some reasons why the ThermalSubsystem/PowerSubsystem are an improvement
on the existing Thermal/Power schemas:
1. They include the latest properties like LocationIndicatorActive.
2. Fans, PowerSupplies, Temperatures were arrays in the old schemas.
This was cumbersome and could hit limits of JSON arrays.
3. Large amount of static data mixed with sensor readings, which hurt
performance in certain cases.
4. Inconsistent definitions of properties vs newer schemas like Processor
and Memory schemas.
Reference:
https://www.dmtf.org/sites/default/files/standards/documents/DSP0268_2020.4.pdf
Tested: Built bmcweb. See the new sensor behavior.
Change-Id: I9a698cbc162a331c21c7dc5138000faac6247f9b
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
FruDevice service is always running no matter if entity-manager is used
or not. It scans for all FRU EEPROMs, parse and store information into
dbus.
This commit changes to get BMC MAC Address from FruDevice data instead
of ipmi-fru-parser.
Tested:
1. Clear environment in u-boot, boot BMC to Linux and check if the
eth1addr variable is set with value from FRU.
2. Change BMC MAC address from FRU's Board Extra. Reboot BMC and check
if the eth1addr variable is set with new BMC MAC Address
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I99b5d46c8a22b98402f749cdebd1c0aad3d6daf0
|
|
Enable support for smbios-mdr using IPMI BLOB transport protocol,
and disable the cpuinfo feature.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I0ed7ff78ba3910ab60018e0b8f55b14a22fcbb2a
|
|
Ed Tanous (2):
Nullify HttpHeaders per the specification
Make fewer copies
Change-Id: I412974106a5e7098058a084fe9223df812bff23e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Willy Tu (2):
helper: Remove alignof for memcpyAligned()
phosphor-ipmi-flash: Fix all C++ warnings
Change-Id: I9b529a551836ca9cd0bdce5f797f472aad4c94df
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Geissler (6):
lg2: convert bmc state manager
bmc-reset: check host boot progress prior to reset
bmc-reset: create error if host was running
bmc-reset: ensure chassis power on target complete
bmc-reset: move to quiesce if host was running
bmc-reset: add service to launch new host recovery
Add new service to install image
Change-Id: I2b3aa0c8c80450295e7884ece74ad9729d3bd66e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zev Weiss (1):
Enable comments in config json
Change-Id: Ifb2c84391dd0bac009a1f673288ee3e7f705af88
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Lotus Xu (1):
Add xdpe12284 support
Change-Id: Ie647b365cf41a019812c08cd50dcdd1e243e7f6a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Adriana Kobylak (1):
mmc: Add dependency to openpower-update-bios-attr-table.service
Change-Id: Ib66e61f1461fed81b2567555cc254bb394c9e4f7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ben Tyner (2):
Attn: Self boot engine (SBE) attention support
Attn: No event log entry for hostboot FFDC error
Zane Shelley (2):
stop ATTN service during watchdog time out handling
Meson project update to v50.0
Change-Id: I093279dbab968beaa55c60d5a4fc5b6d8f9383b7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Lakshminarayana R. Kammath (1):
Led: Configs: Rainier: Update led names to reflect pca955x
Change-Id: I93de5c212b460dee16a72eaa1099d91e934a4c94
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Dung Cao (1):
Update to c++20 and meson >= 0.57.0
Change-Id: I168cd80da56ed25917bb44036f4b0cab7ea19490
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Alexander Kanavin (4):
msgpack-c: update 3.2.1 -> 4.0.0, add msgpack-cpp
can-utils: rrecommend iproute2 to make it possible to configure can interfaces
fmt: update 7.1.3 -> 8.0.1
spdlog: update 1.8.2 -> 1.9.2
Changqing Li (3):
ndpi: upgrade 3.4 -> 4.0
ntopng: upgrade 4.2 -> 5.0
postgresql: upgrade 13.3 -> 13.4
Jan-Simon Moeller (1):
Remove patch that produces a segfault in the ptest of lua
Joe Slater (1):
redis: advance to version 6.2.5
Khem Raj (10):
gjs: Remove valgrind dependency on rv32/rv64
toybox-inittab: Use 0BSD for LIC_FILES_CHKSUM
python3-kivy: Remove hardcoded include paths
python3-kivy: Check for x11 and opengl before enabling the recipe
packagegroup-meta-python: Add python3-kivy
packagegroup-meta-python: Add python3-portalocker
gst-shark: Define SRCREV_FORMAT
android-tools: Define SRCREV_FORMAT
packagegroup-meta-oe: Add pahole
pahole: Add missing rdep for python
Kristian Klausen (1):
cryptsetup: Add runtime dependency on lvm2-udevrules for udev
Martin Jansa (1):
python3-regex: upgrade to 2021.8.28
Matteo Croce (2):
recipes-devtools: add pahole
libbpf: bump to 0.5.0
Mingli Yu (1):
polkit: add the CVE tag
Patrick Williams (2):
gjs: fix typo in RDEPENDS variable name
ndisc6: fix typo in DESCRIPTION variable name
Peter Morrow (1):
libbpf: remove kernel configuration dependency
Samuel Dolt (4):
python3-alembic: add native and nativesdk to BBCLASSEXTEND
python3-editor: add native and nativesdk to BBCLASSEXTEND
python3-sqlalchemy: add native and nativesdk to BBCLASSEXTEND
python3-portalocker: add recipe
Trevor Gamblin (2):
python3-pytest-subtests: add recipe
python3-pillow: upgrade 8.3.1 -> 8.3.2
Wang Mingyu (3):
python3-cryptography-vectors: upgrade 3.4.7 -> 3.4.8
python3-google-api-python-client: upgrade 2.18.0 -> 2.19.1
dnf-plugin-tui: upgrade 1.2 -> 1.3
William A. Kennington III (1):
ndisc6: Upgrade 1.0.4 -> 1.0.5
William Huang (1):
recipes-devtools: python: add support for Kivy
Yi Zhao (4):
krb5: fix CVE-2021-36222
krb5: fix CVE-2021-37750
net-snmp: drop unused patch
net-snmp: make sure snmpd always exit after displaying usage
wangmy (10):
cjson: upgrade 1.7.14 -> 1.7.15
libwebsockets: upgrade 4.2.1 -> 4.2.2
monit: upgrade 5.28.1 -> 5.29.0
nlohmann-json: upgrade 3.9.1 -> 3.10.2
cppzmq: upgrade 4.7.1 -> 4.8.0
dfu-util: upgrade 0.10 -> 0.11
libqmi: upgrade 1.30.0 -> 1.30.2
lockfile-progs: upgrade 0.1.18 -> 0.1.19
poppler-data: upgrade 0.4.10 -> 0.4.11
dnsmasq: upgrade 2.85 -> 2.86
zangrc (11):
python3-ipython: upgrade 7.26.0 -> 7.27.0
python3-kiwisolver: upgrade 1.3.1 -> 1.3.2
python3-ruamel-yaml: upgrade 0.17.13 -> 0.17.16
python3-traitlets: upgrade 5.0.5 -> 5.1.0
gsl: upgrade 2.6 -> 2.7
crash: upgrade 7.2.9 -> 7.3.0
dash: upgrade 0.5.11.3 -> 0.5.11.5
python3-bitarray: upgrade 2.3.2 -> 2.3.3
python3-lrparsing: upgrade 1.0.16 -> 1.0.17
python3-transitions: upgrade 0.8.8 -> 0.8.9
libxmlb: upgrade 0.3.1 -> 0.3.2
zhengruoqin (15):
wireshark: upgrade 3.4.7 -> 3.4.8
uhubctl: upgrade 2.3.0 -> 2.4.0
unclutter-xfixes: upgrade 1.5 -> 1.6
avro-c: upgrade 1.9.2 -> 1.10.2
ctags: upgrade 5.9.20210815 -> 5.9.20210905
xf86-video-nouveau: upgrade 1.0.16 -> 1.0.17
fuse3: upgrade 3.10.4 -> 3.10.5
mosquitto: upgrade 2.0.11 -> 2.0.12
poppler: upgrade 21.08.0 -> 21.09.0
libbytesize: upgrade 2.4 -> 2.6
libeigen: upgrade 3.3.9 -> 3.4.0
libjcat: upgrade 0.1.7 -> 0.1.8
unbound: upgrade 1.12.0 -> 1.13.2
xterm: upgrade 367 -> 368
zchunk: upgrade 1.1.9 -> 1.1.16
Change-Id: I5a866e7773b8c906bc2bd8a4ddf99f006534bf53
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Per our documentation, patches outside of a couple specific directories
aren't allowed. This commit implements a build-time check to see if any
new patches have been added. Functionally, because there's several meta
layers that have broken the rules already, it has to contain a check
against the various patches that already exist in the tree. This list
doesn't constitute a grandfather-ing in of those patches, but recognizes
that we can't immediately back them out, and having the maintainers take
care of them will take time.
Of note, this patchset also ignores patches in any of the poky layers,
as we can't define their policies, and allows patches in meta-phosphor,
as a backdoor in case we need a trapdoor to this policy, and all the
maintainers agree to it.
This change was originally checked into openbmc-build-scripts, but was
moved to support more users, and keeping this list up to date. All
comments on the latest review from
https://gerrit.openbmc-project.xyz/c/openbmc/openbmc-build-scripts/+/46064/2
have been addressed.
Change-Id: I1c3e062278b4856cbfda910bdbf122e4b7539f89
Signed-off-by: Ed Tanous <edtanous@google.com>
|
|
This commit adds the repo test scripts to the main openbmc repository to
be used for verification of meta layers. It is intended to go in hand
with
https://gerrit.openbmc-project.xyz/c/openbmc/openbmc-build-scripts/+/46063
to allow testing meta layers at compile time for compliance. For the
moment it is just a no-op test; In the future, more capabilities will
be added.
Signed-off-by: Ed Tanous <edtanous@google.com>
Change-Id: I034c9cd60590907db73d759eb9d943e3e62e62ec
|
|
OpenSSH recently switched their scp client to default to using the sftp
protocol instead of the legacy scp protocol [0]. There's still an
opt-in flag (-O) available to switch it back, but it'd be nicer to not
require it, and avoid the (sometimes problematic, security-wise)
escaping/interpretation quirks of the scp protocol. (This also allows
using other file-transfer clients like sftp and sshfs.) We're already
compiling dropbear with sftp support anyway, it's just missing the
sftp-server binary.
Tested: in an e3c246d4i build, this increased the squashfs image size by
48KiB, or about 0.25%. With it installed, an OpenSSH scp binary
compiled from current upstream HEAD (commit b0ec59a708b4) could
successfully transfer files to and from the BMC both with and without
the '-O' flag.
[0] https://lists.mindrot.org/pipermail/openssh-unix-dev/2021-September/039616.html
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: I533046cfc85f90307c188ad42ca5c2cedeadfab4
|
|
Support a wrapper script to detect the Host firmware image by checking
the ExtendedVersion field from the MANIFEST file to flash into
the appropriate device components. The supported image type include:
- ExtendedVersion=secondary: flash to secondary Host SPI-NOR
- ExtendedVersion=scp-primary: flash to primary Boot EEPROM
- ExtendedVersion=scp-secondary: flash to alternative Boot EEPROM
- ExtendedVersion=fru: write to the FRU EEPROM.
Tested:
1. Flash UEFI firmware into the primary Host SPI-NOR via WebUI
2. Flash UEFI firmware into the secondary Host SPI-NOR via WebUI
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I7dff2ca0f8b9de85c2cbac1a49d04b6e14721a03
|
|
Pavithra Barithaya (1):
PLDM : Temporary fix in the pldmRepoChangeEvent
Change-Id: Ie130c1bc3211a0d761bfcf45fa3a632811d5ecb5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sneha Patel (1):
Location codes on Hardware status-Inventory and LEDs
Change-Id: I922b969a22d1b42ca539c8b14a98f638816ae1ed
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (2):
Handle D-Bus exceptions
logging: switch to lg2
Lakshminarayana R. Kammath (1):
Add lkammath as the Reviewer
Change-Id: I53becf23f9e535e1ea47620057c991f96b148cb9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrei Kartashev (2):
Inventory.Item.Drive: add Capacity property
Inventory.Item.Drive: add Protocol property
Change-Id: I2e2c9e305427c7944511aa73023b599e5f0c4372
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Shawn McCarney (1):
regulators: Remove monitoring freq from comments
Change-Id: I98e91ff9132b7317a9e2a2ebae2f72a3d9ea1b46
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matthew Barth (3):
control: Use `poweron_target` in place of `full_speed`
json: Handle compatible interface not existing yet
control: Remove setting target = poweron target at startup
Mike Capps (3):
monitor: Subscribe to tach target and feedback services
Monitor: Support hwmon service offline during startup
Monitor - improved use of Inventory for Sensor func. state
Change-Id: I6044b092861e67b13261c9b4f8c6b4ca4638e04c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ed Tanous (1):
Fill in request earlier
Sunitha Harish (1):
EventService : Optimize event data buffers
Change-Id: I8de1220b4c0f1bf804263d2692aac9891833ff76
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Adriana Kobylak (1):
mmc: Copy only LID files during update
Change-Id: I93fbf29efe90cc49e248483c64a0e0fd3b38a703
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I540022c8547367d46f1f2fa52d6a144d41856ec4
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Ia05891430c6c97a89b7bc8ba4558ae496866bf7d
|
|
The `pfx` variable was not correctly being initialized
Change-Id: Iafc0a2ca8dbfe943a9bc8c1649ae68fb00d267a1
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
The return statements should have been exits.
Change-Id: I39a190250656ba676ea2ccbe570b88e3f18e5121
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
In the current state soft-off service is a hard dependency
(requires) for the host shut down target, so in any case where
the soft-off service fails with an error condition, the shutdown
target fails too.
This commit intends to make soft-off service as a soft dependency(wants)
so that the shutdown target can still proceed even though the
pldmsoftoff service fails for whatever reason.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I5650702c6eb71adab10fdb6493c9d582a9cb0129
|
|
bitbake offers a choice of DEB, RPM or IPK packaging. To a degree the
choice is functionally arbitrary for image generation but control over
the package format becomes important if we want to:
1. Include runtime package management functionality in the firmware image
2. Mess about with the packages on the build system
With respect to 1 the IPK format and opkg (an ipk package manager) are
designed for embedded systems[1] - by contrast to RPMs have heavier
dependencies and a greater impact on the size and complexity of the
firmware image.
Regarding 2, the embedded nature and the need for opkg to work without
much fuss leads to a lower configuration barrier by comparison to RPMs.
With ipk it becomes possible to reuse the packages built during image
preparation for core analysis without needing to generate an SDK:
```
$ export LD_LIBRARY_PATH=./tmp/work/x86_64-linux/opkg-native/*/recipe-sysroot-native/usr/lib
$ MY_DEBUG_ROOT=tmp/rootfs-debug
$ ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/*/opkg.conf \
-o $MY_DEBUG_ROOT \
update
$ fakeroot ./tmp/sysroots-components/x86_64/opkg-native/usr/bin/opkg \
-f ./tmp/work/p10bmc-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/opkg.conf \
-o $MY_DEBUG_ROOT \
install dbus-sensors dbus-sensors-dbg
$ gdb-multiarch
(gdb) set solib-absolute-prefix .../tmp/rootfs-debug
(gdb) add-auto-load-safe-path .../tmp/rootfs-debug
(gdb) file tmp/rootfs-debug/usr/bin/nvmesensor
(gdb) core-file obmcdump_17_9597/core.nvmesensor.0.aae91b519d0e4e0e8bbe746e3f6cd25f.2779.9594000000
Core was generated by `/usr/bin/nvmesensor'.
Program terminated with signal SIGABRT, Aborted.
pthread_kill.c:45
45 pthread_kill.c: No such file or directory.
(gdb) bt
pthread_kill.c:45
../sysdeps/posix/raise.c:26
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
/home/andrew/src/openbmc/openbmc/build/p10bmc/tmp/rootfs-debug/usr/lib/libstdc++.so.6
"xyz.openbmc_project.NVMeSensor", this=0x488f04) at
/usr/include/sdbusplus/bus.hpp:234
../../../../../../workspace/sources/dbus-sensors/src/NVMeSensorMain.cpp:159
(gdb)
```
This approach documented in the Poky Reference Manual:
https://www.yoctoproject.org/docs/1.0/poky-ref-manual/poky-ref-manual.html#platdev-gdb-remotedebug-launch-gdb-inferiorbins
Switch all machines to IPK to align the debugging experience with
upstream's documentation and to facilitate efficient use of packaged
software at runtime.
[1] https://openwrt.org/docs/guide-user/additional-software/opkg
Change-Id: I8ef526add2d7a6790de1b3eb3fb85cd39b864f23
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Switching to IPK usage breaks the building of this package.
During the installation there are no required groups.
This commit fixes the issue.
Change-Id: Ibe80f3bf80e851005f637e47ca669e47035dba6d
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
|
|
Possibly a bug in the CMSG logic in glibc, workaround being submitted to
systemd as https://github.com/systemd/systemd/pull/20752.
Change-Id: Ie8aeecd6bbfd329c2b9c18980d823d4722c01428
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
The clk patch is a prerequisite for the backport of the ADC patches.
The ADC patches are not yet merged, but are under active review and are
expected to be merged in v5.16. Version 6 of the patchset was merged.
Billy Tsai (14):
iio: adc: aspeed: set driver data when adc probe.
dt-bindings: iio: adc: Add ast2600-adc bindings
iio: adc: aspeed: completes the bitfield declare.
iio: adc: aspeed: Keep model data to driver data.
iio: adc: aspeed: Restructure the model data
iio: adc: aspeed: Add vref config function
iio: adc: aspeed: Use model_data to set clk scaler.
iio: adc: aspeed: Use devm_add_action_or_reset.
iio: adc: aspeed: Support ast2600 adc.
iio: adc: aspeed: Fix the calculate error of clock.
iio: adc: aspeed: Add func to set sampling rate.
iio: adc: aspeed: Add compensation phase.
iio: adc: aspeed: Support battery sensing.
iio: adc: aspeed: Get and set trimming data.
Dmitry Baryshkov (1):
clk: divider: add devm_clk_hw_register_divider
Eddie James (4):
ARM: dts: aspeed: everest: Add I2C bus 15 muxes
ARM: dts: aspeed: rainier: Add system LEDs
ARM: dts: aspeed: rainier: Add eeprom on bus 12
ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7
Joel Stanley (1):
Revert "block: nbd: add sanity check for first_minor"
Michael Walle (1):
clk: divider: add devm_clk_hw_register_divider_table()
Change-Id: I120d78fa77df01e239eeb67b3209cebfe2973491
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.61 through to
5.10.65 stable releases.
Change-Id: I754ab3d2c0ede419f082d42e245c9e8dd27166b5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Change-Id: Id980b8175dc5621f394771941de065689239fe3f
Signed-off-by: Willy Tu <wltu@google.com>
|
|
Allow to read the host console output via SOL.
Change-Id: I249dcf485bcc34bb7c461feece8999240a33faa1
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
|
|
Override variable syntax change, honister compat, and a CONF_VERSION
bump.
Fixes openbmc/openbmc#3816.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Change-Id: Ia41d159d8118e5dba4b213bb0f7c2d61753c8ad3
|
|
This feature is not needed on p10bmc systems and causes unwanted probing
of i2c hardware and journal entries.
Tested:
- Booted p10bmc machine and made sure it still worked as expected
and no new errors arose
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Idff2477060f5719ad85529daff28ef945e77700e
|
|
Lei YU (1):
meson_options: Enable all features by default
Change-Id: Ia287c5818adaab33c4f09487b8cdd3cb8f190742
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tejas Patil (1):
Add support for MTU property
Change-Id: I76c79f663a143c1e6cc72cf0d66eaf0bea7d50aa
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brandon Kim (1):
Add Model property to Cpu Interface
Change-Id: I30076561b0553b27f8d60afdc85e904a6cce1cfe
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (2):
Add GeorgeLiu as the Reviewer
Update clang-format
Vishwanatha Subbanna (1):
Add Patrick as the Maintainer
Change-Id: I075aa936f782e993a6427cf266054421f8bfd1f1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jean-Marie Verdun (1):
Add initial support for polarity on a couple of GPIOs
Zev Weiss (2):
Append node number to dbus names more directly
Fix powerControlDir creation failure error message
Change-Id: I7299ba7115a2ea17ef7daefc9da1fc3796da29e4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Alpana Kumari (2):
Dimm memory size support
Enable dynamic presence detect of FRUs
Matt Spinler (1):
Support size_t properties on extraInterfaces
Santosh Puranik (1):
Set one-time properties and PrettyName
alpana07 (1):
DD2: Enable Dimms
Change-Id: I3446ce4e07f69c4cddabc5a7867e5eec6e599a36
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sneha Patel (1):
Remove unnecessary span from toggle component
Change-Id: If216d4dd69019e0fe2ba483f4c650917b2681550
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Shawn McCarney (7):
regulators: Clear phase fault history in Device
regulators: Simplify Chassis test cases
regulators: Add detectPhaseFaults() to Chassis
regulators: Simplify System test cases
regulators: Add detectPhaseFaults() to System
regulators: Enable phase fault detection
regulators: Fix race condition in monitor disable
Change-Id: I3ca7bf31b10fb03548c99c04057da770695a1df6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tim Lee (1):
bmc-state-manager: Add support BMC Reboot Cause feature
Change-Id: I1758df4efde9dec8981c400d95bee740cf1737a7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayaprakash Mutyala (1):
Master Write-Read: Validate reserved field content
Change-Id: I2390ef052ea1c593681ebf3a547ca92d03f2b6bc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|