Age | Commit message (Collapse) | Author | Files | Lines |
|
Change-Id: Ic1cde1cd67fa6f8f68df80a1f327ace64a39d72b
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
debug-trigger listens for an external signal that the BMC is in some way
unresponsive. When the signal is received it triggers a crash to collect
debug data and reboots the system in the hope that it will recover.
Change-Id: Ib8ea615c2944edb0448b06c333b6e2abbea15687
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
Use mapper get-service to check if each LED D-bus
is ready and also make LED group service restart
not too fast when the serive start failed
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Idd002e4f42d2664bc2f573a8dcc1afcfa593178a
|
|
Since the nvmem sysfs path would use nvme config id
in kernel 5.10, replace nvmem sysfs path by eeprom
to compatible with all kernel version
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: I861f9bf8e26bf5b96e0727d4dfb3e2a7e4032116
|
|
Raw SerIO is used by the debug-trigger application to take signals from
the host that applications are unresponsive on the BMC for p10bmc
systems.
Change-Id: Ie5ee683c3b08ebe922f2c5a7b5bf52b1e18069f4
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
Andrew Jeffery (16):
ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
ipmi: kcs_bmc: Make status update atomic
ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
ipmi: kcs_bmc: Turn the driver data-structures inside-out
ipmi: kcs_bmc: Split headers into device and client
ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
ipmi: kcs_bmc: Decouple the IPMI chardev from the core
ipmi: kcs_bmc: Allow clients to control KCS IRQ state
ipmi: kcs_bmc: Enable IBF on open
ipmi: kcs_bmc: Add serio adaptor
dt-bindings: ipmi: Convert ASPEED KCS binding to schema
dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
ipmi: kcs_bmc_aspeed: Optionally apply status address
Change-Id: If4267164d165c0ecb5039d55438d4a58926ecce3
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Sometimes the phosphor-networkd starts before systemd-networkd finishes
configuring NCSI interface. This causes phosphor-networkd to mark this
interface as unmanaged.
Setting NICEnabled property to true will ensure the interface is
enabled. If this service starts before systemd-networkd is done, the
set-property command will fail. So retry till the command succeeds.
Signed-off-by: Vivekanand Veeracholan <vveerach@google.com>
Change-Id: I232d363cff48bbf955ac0f1f9a6dac7ae5467257
|
|
Currently, machine evb-ast2600 frozed during u-boot booting.
This patchset has been tested with AST2600-A1 and AST2600-A3 EVB:
AST2600-A1:
```
U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000)
already initialized, Trying to boot from RAM
U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000)
SOC: AST2600-A1
RST: WDT1 SOC
PCI RST: #2
LPC Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII
Model: AST2600 EVB
DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB), ECC off
MMC:
sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0
Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK
In: serial@1e784000
```
AST2600-A3:
```
BP0c00
U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000)
already initialized, Trying to boot from RAM
U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000)
SOC: AST2600-A3
RST: WDT1 SOC
PCI RST: #2
eSPI Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII
Model: AST2600 EVB
DRAM: already initialized, 960 MiB (capacity:1024 MiB, VGA:64 MiB), ECC
off
MMC:
sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0
Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK
In: serial@1e784000
```
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Change-Id: I77ec3c2928ca96ee3f51290fd3435fca08bb058a
|
|
William A. Kennington III (6):
utils: Deduplicate library loading
utils: Make loader more lenient
treewide: Remove unused variables
ipmi: Remove non-standard c++ array syntax
build: Add meson
meson: Install headers
Change-Id: Ia7253baea8f3f40f12b2d5e9b9b13a475363d4f3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This includes the following bump: e22e8231c4..e04c1173c1
Andrew Geissler (3):
gitignore: ensure utest.cpp not ignored
meson: remove old automake files
meson: fix static initialization order race condition
Jayanth Othayoth (1):
Fix related P10 SPI mux settings
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Iff99f6536d2552984bb08c2e3267c36cde1bf8d4
|
|
Vernon Mauery (1):
Add power/reset button mask checks for RequestedHostTransition
Change-Id: I10bd493c7c357b93d9c39435e271d4a6d1efbef4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matthew Barth (83):
control: Remove use of static lib JSON objects
control: Self registering action objects framework
control: Add all fan functionality to JSON fan object
control: Add creating config object without a dbus object
control: Construct events' groups
control: Update JSON action objects to run the action
control: Create manager object for JSON configs
control: Split JSON and YAML based binaries
control: Parse/add zones to manager
control: Add fan objects to their zones
control: Use group objects in actions
control: Remove JSON zone object include of YAML zone object
control: Remove references to "speed" in JSON objects
control: Fill in `requestIncrease` method
control: Remove ZoneHandlers from JSON zone object
control: Use JSON zone object's dbus property methods
control: Add zone setTarget required functions
control: Add request target base action
control: Add set target on missing owner action
control: Extend actions from the config base object
control: Add count state set target action
control: Add net target increase action
control: Add net target decrease action
control: Handle adding timers and when they expire
control: Update config loading
control: Add zone increase & decrease timers
control: Restore `Current` property for each zone
control: Update zone target on startup
control: Load JSON configured groups and events
control: Remove `json_parser` source
control: Handle empty profiles for configuration objects
control: Use Group objects in events
control: Create config key check function
control: Add event actions
control: Provide zones to the events
control: Set groups & zones on event actions
control: Group configuration inputs should be const
control: Update base action object with zones and groups used
control: Actions use list of groups set on base object
control: Timers no longer need the zone and group
control: Handle updating service states
control: Provide pointer to manager object to events
control: Add getBus() and getGroups() functions for triggers
control: Add event trigger creation
control: Add timer trigger support
control: Remove `path` argument to add services
control: Correct which json object used in event actions
control: Copy everything in Group copy constructor
Add `getManagedObjects` method call
control: Setup to subscribe and handle signals
control: Add signal triggers with propertiesChanged signals
control: Add interfacesAdded signal support
control: Add interfacesRemoved signal support
control: Add nameOwnerChanged signal support
control: Get property from cache and add objects
control: Add init trigger support
control: Extract bus object from config argument pack
control: Switch to using static instance of bus
control: Set owner state for all service entries
control: Support switch to 'default_ceiling'
control: Handle `Current` property changing
control: Optimize loading/configuring event groups
control: Remove JSON event precondition support
control: Remove event `getActions()`
control: Store/use trigger enable functions on events
control: Remove manager parameter from create trigger function
control: Separate zone creation from enabling
control: DBusZone object for dbus objects
control: Manage zones' dbus interfaces with a DBusZone object
control: Support reloading configurations with SIGHUP
control: Introduce `poweron_target` configuration attribute
control: Make decrease interval optional
control: Set fans to `poweron_target` at poweron
control: Remove manager JSON config
Only load compatible interface objects once
control: Add successful configuration file loaded message
control: Add ObjectManager interface
json: Use a single list of compatible values
json: Add constructor for loading a fan app's config file(s)
control: Load config file(s) when available
control: Store signal packages as a reference
control: Temporarily handle starting at poweron
control: Enhance handling exceptions restoring `Current` mode property
Change-Id: Ie4cc6f83a7e45ae706a7c10f893a8c3ef897efd6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ravi Teja (1):
Fix DeleteAll to set boot count 0
Change-Id: I5784117931029d90aec6d73be517ca4d9443e9ab
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Charles Boyer (1):
log_services: Fix system dump entries route
Ed Tanous (1):
Remove ambiguous privileges constructor
John Edward Broadbent (1):
Remove duplicate Managers field
Vernon Mauery (1):
Free cert usage before return
Change-Id: Ib72db608c719d3e9f28a36fcfdaa8d2fabe83af2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Joshi-Mansi (1):
Change read count to 255 in Master Write-Read Cmd
Change-Id: I3c5fbfcc7371366adef0d5b19ae304d1f329883b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (1):
Fix the return value of pack_pldm_header and unpack_pldm_header
Tom Joseph (1):
Fix: uninitialized local variable
Change-Id: I8373b2d04738fff38bb361ea9a409723c40f4de3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Jeffery (2):
README: Fix rendering of Overview header
meson: Add global arguments before invoking the compiler
Change-Id: I6eae713dde3cffc8b4730ca7ef63afc9cf1da401
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (4):
exception: Fix noexcept qualification
exception: Add ignoreQuiet functionality
cancel: Add cancelable utility
cancel: Add utility for always running callback
Change-Id: Id5424dae2b4676c845d0fd1430e56bf82670aa62
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Isaac Kurth (1):
version: Add metadata to MANIFEST errors
Change-Id: Ib58d9eced3efb15aff36d624e7a3152b8d5caf82
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayanth Othayoth (6):
PEL: enable base infrastructure for SBE FFDC base PEL create
PEL: Create TemporaryFile class
PEL: API to convert FAPI based data to PEL format
PEL: move jsonCalloutSubtype const definition to header
PEL: Add SBE FFDC process function
PEL: enable SBE FFDC support in pel log
Matt Spinler (1):
elog-gen: Install elog-gen.py
Change-Id: I061381eaf9d4ec7ba47e37838c73d41f6b2a8df2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (2):
Replace find method with contains method
Fix utest-led-json.cpp should not depend on use-json
Seires Li (1):
meson: support custom led yaml path
William A. Kennington III (1):
build: Tests should default to auto not enabled
Change-Id: I65bc41355034a753f74cd4969f551eb7794ded10
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jae Hyun Yoo (1):
Fix a build break in the latest yocto tree
Change-Id: I3133bfe5f49eab06f6bfd4e752418dfca1c039c7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Hao Jiang (1):
Bug fix: wrong cmake external project cmd format.
Change-Id: I88eae46dde4153ede83623a2897aacb03157b781
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Chalapathi Venkataramashetty (3):
pfr-manager: Get i2cBusNumber and i2cSlaveAddress from EntityManager.
pfr-manager: Read and update last event counts in dbus
pfr-manager: stop pfr-manager service if PFR not supported
Change-Id: I0269965ea7553fa44907ce2df81dff5e77cb6b5a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Initial recipes-phosphor/host code from gBMC.
Google-Bug-Id: 179618560
Upstream: 1182879e906e67ca171b21c1eaa4027f9d162e49
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I9a9baa0528ce4dfc33437a1e9ae908ce22dc6d16
|
|
The upstream has defined the 64MiB layout, use the upstream one.
Tested: Verify g220a's image boots fine in QEMU.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: Id69df5796c11f1d86bc1340fdb7127f0eb3f3e18
|
|
Use the new u-boot-aspeed-sdk as the uboot.
Tested: Verify the image boots u-boot in g220a QEMU, and boots the
OpenBMC if bootcmd is modified to fit the image.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I93c3a083a81f09d37627749c8d0692ae9a75466a
|
|
Initial recipes-phosphor/initrdscripts code from gBMC.
Google-Bug-Id: 179618491
Upstream: 1182879e906e67ca171b21c1eaa4027f9d162e49
Signed-off-by: Brandon Kim <brandonkim@google.com>
Change-Id: I810f3a80d635d2c3a38fcb1db7ee4c396ae2d7bb
|
|
Add an addition override for 64MiB static flash layout.
The existing 32MiB layout are unchanged:
partition: size: offset
u-boot: 384 KiB (0 KiB)
u-boot-env: 128 KiB (384 KiB)
kernel/FIT: 4352 KiB (512 KiB)
rootfs: 23808 KiB (4864 KiB)
rwfs: 4MiB (28672 KiB)
The existing 128MiB layout are unchanged:
partition: size: offset
u-boot: 896 KiB (0 KiB)
u-boot-env: 128 KiB (896 KiB)
kernel/FIT: 9 MiB (1 MiB)
rootfs: 86 MiB (10 MiB)
rwfs: 32MiB (96 MiB)
The new layout for 64MiB is as follows:
partition: size: offset
u-boot: 896 KiB (0 KiB)
u-boot-env: 128 KiB (896 KiB)
kernel/FIT: 9 MiB (1 MiB)
rootfs: 32 MiB (10 MiB)
rwfs: 22 MiB (42 MiB)
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Change-Id: I001cf2e9bc30edc34e43c0c4503684050e2a764f
|
|
Added template for Redfish format in rsyslog conf file to
save the journal entry as Redfish event.
Tested : Verified journalctl log in tiogapass using Redfish.
Signed-off-by: Jayashree Dhanapal <jayashree-d@hcl.com>
Change-Id: Ic09530c824e65c5dd27fc4c6dac5a385370bdadc
|
|
Michael Shen (1):
metrics-ipmi-blobs: Add bootup time to metrics
Change-Id: Iee2f6998ec9e0c241095c841c27e95ac151f76e9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
It checks GPIO key for powersupply presence, and creates
the inventory object.
Tested:
1. Plug the PSU, check busctl command for Present attribute
2. Plug out the PSU, check busctl command for Present attribute
$ busctl --no-pager introspect xyz.openbmc_project.Inventory.Manager
/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I4520d537d425249debe5c0d8c6bf8b0f6e3c5b34
|
|
When system only uses single PSU ( ex : PSU1 ) to power ON normal 12V,
HSC2 will be trigged Fault event (FET health).
At this time, plugging in PSU2 in system, the PSU2 won't deliver power to
+12V_MB because HSC2 is protected by Fault event.
Due to HSC2 protected, the PSU redundancy mechanism can't be created.
Once PSU1 is plugged out at this moment, system will crash ( reset )
because +12V_MB dropped.
Support detecting PSU plug event and reset the Hot-Swap feature by
disabling and then enabling again it through PMBUS command to clear the
event.
Tested:
1. Plug only PSU1 to power ON system (12V)
2. Wait until host is booted, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 112 Watts | ok
PSU2_POUT | 0 Watts | ok
3. Plug in PSU2 in system, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 64 Watts | ok
PSU2_POUT | 48 Watts | ok
4. Unplug AC power PSU1, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 0 Watts | ok
PSU2_POUT | 128 Watts | ok
5. Plug in AC power PSU1, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 80 Watts | ok
PSU2_POUT | 64 Watts | ok
6. Repeat 1. to 5. with PSU2.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: Ia6e00cd7b08de48059f2450e7eaf108418d0a026
|
|
Chicago Duan (2):
Redfish: Fix bug that cause validator failed
Redfish: Fix issue of EventDestination
Ed Tanous (12):
Remove Node class from Account Service
Change ManagerAccount privileges to match registry
Move Sessions to non Node structure
Move the hypervisor endpoints into a namespace
Move ethernet interface away from Node class
Remove the Node class
Remove Node class from NBD proxy
Fix shadowing of parameter in scripts
Update clang-format version in scripts
Update registries
Fix Session delete to return 200
Fix base registry validator failure
John Edward Broadbent (1):
Corrects URI by removing /<str>
Tejas Patil (1):
Add support for MaxImageSizeBytes in UpdateService
Change-Id: If16b05d138136b81397c6d38fcdcbefc19c18e27
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Pavithra Barithaya (1):
PLDM: Fix for handling invalid event state
Sridevi Ramesh (1):
Fix for pldmtool GetFruRecordTable command with oem-ibm disabled.
Change-Id: I136e13252db412c6451c94e03dc845d57ecdfaac
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (6):
build: Install dbus policy in datadir
build: Don't build tests by default in submodules
build: Remove deprecated get_pkgconfig_variable method
extensions: Deterministic global construction ordering
sdjournal: Migrate code into cpp file
build: Use global variables instead of macros for test features
Change-Id: I7e8412dd429e024bbc15ca79367472f4cb5b0ab8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Need to append the meson option to disable tests so that it doesn't
overwrite previous options.
Tested: Built witherspoon with -e option and verified EXTRA_OEMESON
showed all the meson options for ubi.
Change-Id: I1275a790feefdc3aa5d85aa9b36bf5d7d3a4d44e
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Change-Id: I4453f9b01f986a529c76710d665ab57639232b2d
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
|
|
This includes security and bug fixes from the 5.10.43 stable release.
Change-Id: I80b2c7f29a96ca11e2d291957bd573c5c70310e9
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Nan Zhou (1):
nemora-postd: import from gBMC
Ofer (1):
preserved ofery@ +2 for google misc repos Add suichen@ and ofery@ as maintainers for metrics-ipmi-blobs
Change-Id: I482493e733489a7887a2b9f63e1c3dd811bafd26
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Dung Cao (1):
Fix the boot order of ssifbridged
Change-Id: I2d211759beb0f944ed5f15d6f86adf371a98a362
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zane Shelley (6):
Separate building of chip data and parser data files
setuptools for openpower-hw-diags PEL parser data
update PEL parser output to include register addresses
combine signature and node field in PEL parser output
Add attn types to PEL parser output
Add chip descriptions to PEL parser data
Change-Id: I7e7d3cbe4c3713bd76b582760996f9eb4d376d78
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Asmitha Karunanithi (1):
Add validation of IP address
Change-Id: Ib212e5d1d0eabcb99c6ccd36430390038f76bb7e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (6):
build: Use meson built-ins instead of realpath
build: Don't use implicit includes
build: Add headers to dependency
build: Don't generate markdown for subprojects
treewide: Create yaml directory
gen/run-ci: Only check files inside of gen
Change-Id: I55d11745a297a6506ca89d53b5c192b1bba8ab81
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (1):
libpldm: Add APIs to decode descriptor entries
Change-Id: I46397f4419453ae3b9828ced8105912fef74df3a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Krzysztof Grobelny (1):
Add skipping PropertiesChanged signal on init
Change-Id: If0b4b8f16767d458c68138296a79812fbe307244
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Derick Montague (1):
Update docs theme section to customization
Dixsie Wolmers (2):
Add event log resolve and unresolve log functionality
Add quicklinks to hardware status page
MichalX Szopinski (2):
Virtual Media, change Save image label to Load image
Remove hardcoded chassis in power supplies
Sneha Patel (1):
Dump download file name
Change-Id: If9287975d26a7fca1fec2f3019f97dcf448f7ad1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
SLAB_FREELIST_HARDENED can protect from freelist overwrite attacks with
really small overhead.
It works best with the SLUB allocator, so make SLUB the default by
removing SLAB=y.
total used free shared buff/cache available
SLAB 425596 44065.3+/-220 311099+/-3800 14864+/-3900 70432+/-3700 352767+/-3900
SLUB 425592 44225.3+/-280 313275+/-600 12132+/-3.3 68092+/-530 355295+/-280
These figures are the average memory usage from three boots of each
option in qemu, running the Romulus userspace. The output is from
free(1), reported in kilobytes.
Change-Id: I3c3ce67bc202dffbc3084382227f3dbc77f4cf85
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This reverts commit f5f78f62d720ef57a54660927ba9a45515243190.
Reason for revert: due to x86-power-control not allowing DC cycle when host is down for fallback watchdog action
Change-Id: Idcc6e5d585bfcd9664755b32277d441118beef15
Signed-off-by: George Hung <george.hung@quantatw.com>
|
|
The PEL parser for openpower-hw-diags requires some data files built by
openpower-libhei. There will eventually be another recipe for that will
use the same SRC_URI and SRCREV as openpower-libhei. So that information
has been moved to the openpower-libhei-rev.inc file. Then, the recipes
for both of these projects have been cleaned for readability.
Signed-off-by: Zane Shelley <zshelle@us.ibm.com>
Change-Id: Ib2141e53480d4b8a9afc767427e87bcefe02afc1
|