Age | Commit message (Collapse) | Author | Files | Lines |
|
This rebases the OpenBMC kernel tree on a 4.18 base. There are 85
patches backported from 4.19-rc1, and the following 39 out of tree
patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
ARM: dts: aspeed: witherspoon: Update max31785 node
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (4):
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
ARM: dts: aspeed: Add Power9 CFAM description
Brad Bishop (1):
ARM: configs: Remove atags from Aspeed G4 config
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (6):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
ARM: dts: aspeed: Add "spi-max-frequency" property
Edward A. James (2):
drivers/fsi: Add On-Chip Controller (OCC) driver
hwmon: Add On-Chip Controller (OCC) hwmon driver
Joel Stanley (15):
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Enable VHUB on Romulus
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
ARM: config: aspeed: Add out of tree drivers
ARM: dts: Add OCC description to Power9 dtsi
(From meta-aspeed rev: 2f1187b1bff8d52ddd93f2c5b598eec7ddc9f4f6)
Change-Id: I4035abcdcfa9a083599e27661fed5351fc6532fd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
add .clang-format
(From meta-phosphor rev: 91825c03eb7151ad917e9aec3266ba9fcaaef947)
Change-Id: Ia4b07602ebe5ea6e4c06c33ab77f0b257f63ea26
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (2):
Move to clang-format-6.0
Remove hack for 1/0 booleans
(From meta-phosphor rev: bd847c188b7acb547578bf9e0321c9709ae03d55)
Change-Id: I081a828f4c342c9fac3f35a293a285252a7ead6b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
clang-format: always break template declarations
(From meta-phosphor rev: 655f0aa9f1eecd3fe8fc18cbdc9a7b61a2fa38d6)
Change-Id: Ibd33b6b42c5b650fd41a6998595c3fddfeba5e65
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
Clang 6 updates
(From meta-phosphor rev: 6357b1f20015296afba97a4bb2c1efea03b7db8f)
Change-Id: I7be8c3dc99a65d5113075a90929946ecb44320b3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ed Tanous (1):
Resolve issue with duplicated static files
(From meta-phosphor rev: 0e517f8a431289ddb1e02b2eaaa990114f259ce1)
Change-Id: I7780e6155645ff8c53157056dcbb7e470baefd3b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Vernon Mauery (1):
Allow callback raw access to message
William A. Kennington III (1):
configure: Fix --disable-tests
(From meta-phosphor rev: 8d64ddbe545c58c2f0c4d6f0a73a658996f11b94)
Change-Id: I425468e87b726bff0dcea6ba80b80ee9e6a72878
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Deepak Kodihalli (3):
phoshor-rsyslog-config: wrap utils::restart
phosphor-rsyslog-conf: add unit tests
phosphor-rsyslog-conf: add unit tests
(From meta-phosphor rev: 39ae434fa51513aa0715df0e772555cfeea0af0c)
Change-Id: I94e70f3b53bce4f285d8b1aedb61e6cdd3338230
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
Add -flto to CXXFLAGS
(From meta-phosphor rev: 7aefde2c1c20dac9271fab604c203dbe615de349)
Change-Id: I2dcb4e619c1c81b50697864689acb72b08b82f4c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
add .clang-format
(From meta-phosphor rev: 2cc612c2f8a3d2ca01e3fc43c0434184cd625d0f)
Change-Id: Ic033237071af7c8e413f48c8531319be721367bc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
beccabroek (1):
Event log select all checkbox
(From meta-phosphor rev: 512574c50df3fd68f8a5cee2fb3327a48e85da32)
Change-Id: Icf12e56cbb2865753d36a333cc1e5b37e77e887e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Lei YU (1):
EpocTime: Use proper errors on setting time failure
(From meta-phosphor rev: b12dda36607e5770afb5b19cc861baea645ded87)
Change-Id: I7e4125dec6938d92b76be606d245d4e7e1f36216
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
reorder headers
(From meta-phosphor rev: c37be581778d36913e5398928e91dcc64214f791)
Change-Id: I6d8819481f422bbba531709bc96148a94374f58f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
Add -flto to CXXFLAGS
(From meta-phosphor rev: 9ddb021682a17da707003bef3da43dce08f0cb0a)
Change-Id: Id50cf65ab4650569b421cc91a1b659f079fec139
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
Control: Make PowerSupplyRedundancy const (read-only)
Andrew Geissler (1):
Add -flto to CXXFLAGS
Deepak Kodihalli (1):
Add errors to Network/Client interface
(From meta-phosphor rev: 96dc4d450b840533b771f3c3848b3cb47a6b4891)
Change-Id: Icb0dccfc6d0647837dfb2ac4d840d4b477a21ba4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
Add -flto to CXXFLAGS
(From meta-openpower rev: 4ef98b10b0b1cc60a1ddb0bea43b74891c8ff0b7)
Change-Id: Ic173839a87cd2458ab821905d45c1eb0331e7e97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (5):
fan_control: Move to using xyz.openbmc_project.Sensors
configs: Remove BootProgressSensor
configs: Remove the OperatingSystemStatus sensor
configs: Remove BootCountSensor
configs: Remove TurboAllowedSensor
Matt Spinler (16):
Add function to load in the GPIO data from JSON.
Add documentation on GPIO JSON
Use cJSON to read the GPIO configuration
Use cJSON to get the GPIO definitions
Fill in function to convert GPIO pin to a number
Fill in the function that finds the GPIO base
Remove host control GPIOs from GpioConfigs
Call gpio_inits_done() from GPIO consumers
Remove unnecessary args from GPIO functions
Point obmcutil chassiskill code at the GPIO JSON
Remove the GPIOs from Witherspoon.py
Remove the GPIOs from Zaius.py
Remove the GPIOs from Lanyang.py
Remove the GPIOs from Palmetto.py
Remove the GPIOs from Romulus.py
Remove the GPIOs from S2600wf.py
(From meta-phosphor rev: a3c2e523e1cd83b088cb70ccd6d3fdc697785c1f)
Change-Id: I847dfae765dfea67738bc93bd589621ab9249849
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (4):
sensors: Remove BootProgressSensor
sensors: Remove OperatingSystemStatusSensor
sensors: Remove BootCountSensor
sensors: Remove TurboAllowedSensor
(From meta-phosphor rev: da48ad15d35d36a73f440cc7efb2f1da48e603e4)
Change-Id: Iec930d45b7b7f390073b83d27fb420529940ca9c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Restructure phosphor-logging recipe to allow additions of packages.
(From meta-phosphor rev: 38af2c0d75122aecaeac53c0190884a48885f6a6)
Change-Id: If187200a0874bc0c9ce6e4d759a2e1ca7ea7ffc8
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This reverts commit cffe1bf83203854489e7b8bab81c9188143f7ab5.
This is to enable syslog daemons to forward journal logs to a remote
server.
(From meta-phosphor rev: 03f3dbd09e50b6e63418118df6e2267a2ba650bc)
Change-Id: Ie1ff86a2f48e77227eda60f2f047e6f33ff7b01c
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ed Tanous (2):
Add json to the known content types
Make dbus monitor compatible with phosphor-rest
(From meta-phosphor rev: fb386a7e5cd0f760a47f5de7f9ec3445ff27ca03)
Change-Id: I62bca43b27272e9800e9207bf222bda532d71229
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
rest_dbus: Add read-only property error
Matt Spinler (1):
Explicitly convert dbus.Booleans to bools
(From meta-phosphor rev: a2c69d7b18c201dc2e7b269eb436d87cfa54654e)
Change-Id: I11889bb8c9bebc02e5eef6b64dca0c47a6ba0781
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (1):
Fix broken link
(From meta-phosphor rev: 8a34d2d33b124170321cfe18a0082a44bee81083)
Change-Id: Ia68dc83f7743a7b320c9cfac6aae201addceebc0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
add missing gmock header: read|write interface mock
(From meta-phosphor rev: 2d789d810dc9b74817760473ea25d631c0183ff5)
Change-Id: If44eb6054745b5e42594059cd92ae31ebd7c6fa7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (6):
Add Power Usage Page
Remove unused chassisPowerOn
Set the power cap
Add config.json file
Remove double variable set
Remove 2nd CopyWebpackPlugin var
beccabroek (1):
Checkbox not selected with 0 log events selected
(From meta-phosphor rev: 9568968e0534f24e1a23a2be64706cb089b94dab)
Change-Id: I1f4b29550d112d2da6f02c3250ab6e7f578ee301
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Deepak Kodihalli (5):
documentation: markdown header level fixups
Add application to configure rsyslog
phosphor-ryslog-conf: add way to disable logging
rsyslog-conf: add validation and error handling
phosphor-rsyslog-conf: implement restore
(From meta-phosphor rev: ea6a3d1ce6e1921e7e729a71c68cbfed3b564676)
Change-Id: I97cf268e88b94bcc9efad6991a2291e8cb15d061
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
Add -flto to CXXFLAGS
Lei YU (3):
Make MEDIA_DIR configurable
Delete functional BMC id if ACTIVE_BMC_MAX_ALLOWED is less than 2
static layout: Support field mode
(From meta-phosphor rev: 1b7c30dcac5dff739a6ccb66ccd20ed632511f9b)
Change-Id: If5b70e8c063b86c9ee8dbc6bcd433b52b0a7d5e4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update poky to sumo HEAD.
Alexander Kanavin (1):
openssl: fix upstream version check for 1.0 version
Andre McCurdy (19):
openssl_1.1: avoid using += with an over-ride
openssl_1.1: minor recipe formatting tweaks etc
openssl_1.0: merge openssl10.inc into the openssl_1.0.2o.bb recipe
openssl_1.0: minor recipe formatting tweaks etc
openssl_1.0: drop curly brackets from shell local variables
openssl_1.0: fix cryptodev-linux PACKAGECONFIG support
openssl_1.0: drop leading "-" from no-ssl3 config option
openssl_1.0: avoid running make twice for target do_compile()
openssl: remove uclibc remnants
openssl: support musl-x32 build
openssl: minor indent fixes
openssl_1.0: drop obsolete ca.patch
openssl_1.0: drop obsolete exporting of AS, EX_LIBS and DIRS
openssl_1.0: drop unmaintained darwin support
openssl_1.0: add PACKAGECONFIG option to control manpages
openssl_1.0: squash whitespace in CC_INFO
openssl: fix missing dependency on hostperl-runtime-native
openssl_1.0: drop unnecessary dependency on makedepend-native
openssl_1.0: drop unnecessary call to perlpath.pl from do_configure()
Andrej Valek (3):
openssl-1.1: fix c_rehash perl errors
openssl: update 1.0.2o -> 1.0.2p
openssl: update 1.1.0h -> 1.1.0i
Anuj Mittal (1):
wic/qemux86: don't pass ip parameter to kernel in wks
Changqing Li (1):
unzip: fix CVE-2018-1000035
Hongxu Jia (2):
nasm: fix CVE-2018-8883 & CVE-2018-8882 & CVE-2018-10316
patch: fix CVE-2018-6952
Jagadeesh Krishnanjanappa (19):
libvorbis: CVE-2017-14160 CVE-2018-10393
libvorbis: CVE-2018-10392
flac: CVE-2017-6888
libarchive: CVE-2017-14503
libsndfile1: CVE-2017-14245 CVE-2017-14246
libsndfile1: CVE-2017-14634
coreutils: CVE-2017-18018
libgcrypt: CVE-2018-0495
git: CVE-2018-11235
gnupg: CVE-2018-12020
shadow: CVE-2018-7169
procps: CVE-2018-1124
python: CVE-2018-1000030
qemu: CVE-2018-7550
qemu: CVE-2018-12617
perl: CVE-2018-6798
perl: CVE-2018-6797
perl: CVE-2018-6913
perl: CVE-2018-12015
Joshua Watt (2):
alsa-lib: Cleanup packaging
swig: Remove superfluous python dependency
Ovidiu Panait (1):
openssl-nativesdk: Fix "can't open config file" warning
Ross Burton (6):
bzip2: use Yocto Project mirror for SRC_URI
classes: sanity-check LIC_FILES_CHKSUM
openssl: disable ccache usage
unzip: fix symlink problem
bitbake: utils/md5_file: don't iterate line-by-line
bitbake: checksum: sanity check path when recursively checksumming
Change-Id: I262a451f483cb276343ae6f02c272af053d33d7a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(Bitbake rev: 822dd77333896538393c657dd220d8f66d8a46a7)
(From poky rev: edabecd5764078b539daf35848ff4b107cd65c44)
Change-Id: I9da025690a8578b8f14e399a16997a34b2769bf3
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
(From meta-intel rev: 5ed9fa2b7afcf26db471f13845c47950939a517f)
Change-Id: I40004c8b9d5258dd0af6d702b02768835820eaa1
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
(From meta-inventec rev: 6abf0600f408fc66d182e829c60a3ea807e49ffa)
Change-Id: Ia0e3b5ddf720163b039c0b5d70f23b83833e4d93
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
(From meta-ingrasys rev: 5d62d701c830a68eb2ca20246535787ea4456355)
Change-Id: I999f36730a33dd61051a9ce691fdfb8fd05a9ec5
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
(From meta-ibm rev: 2ba966c18046651d2115d732cbb0ed8b231bafad)
Change-Id: I58a5087252b5dc6a98174837305485925c07c712
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
(From meta-ibm rev: 55b2003b3e07c7d45f94409eaf636f0335571152)
Change-Id: I88f44342a587b8dccaa845bff59c35e1414d1358
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in the skeleton repo.
Resolves openbmc/openbmc#3332
(From meta-ibm rev: b11913ce2ee64a085fd69146eb76a3ebff94e7ab)
Change-Id: Ic82d55bae6c7772cb8a5b836fb6138f429dd0346
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The code in libopenbmc_intf.so looks for the GPIO definition file
/etc/default/obmc/gpio/gpios_defs.json. Install it from this
recipe.
The actual JSON files should go into the corresponding directories
in the machine layers along with a bbappend of this recipe to
set FILESEXTRAPATHS_prepend.
(From meta-phosphor rev: 728258c6a235f75176ea213e671d7a93904ca72a)
Change-Id: I3969e005cbdfd04ae8cec1c13c3c3bb625dca574
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For static flash layout, configure ACTIVE_BMC_MAX_ALLOWED to 1, because
it has only one active BMC image;
For ubi-fs, configure ACTIVE_BMC_MAX_ALLOWED to 2, because ubi-fs
assumes there are two BMC images by default.
Resolves openbmc/phosphor-bmc-code-mgmt#2
Tested: Verify that ACTIVE_BMC_MAX_ALLOWED is set to 1 for Romulus
build, and set to 2 for Witherspoon build.
(From meta-phosphor rev: bf3edf1ce09f19836c38c2dd43ab4e50664fc46e)
Change-Id: I60e49c14bda25547fde9a2308470ed164ebbd249
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Configure MEDIA_DIR to /run/media for static flash layout;
Configure MEDIA_DIR to /media which is default for ubi-fs.
Resolves openbmc/phosphor-bmc-code-mgmt#3
Tested: Verify that the MEDIA_DIR is set to /run/media for Romulus
build, and set to /media for Witherspoon build.
(From meta-phosphor rev: f43eb6ee89433e4898cbdb1532963f038419c003)
Change-Id: If96c2ee135d314bd6de0cd745c6a871b75183fe1
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Static flash layout will use obmc-flash-bmc-setenv service to set
factory-reset env in u-boot, so make it common for both static and ubi
flash layout.
Tested: Build the image and verify the service and the obmc-flash-bmc
script exist in both static and ubi builds.
(From meta-phosphor rev: b2c944f13b0f891a7f569f3a9608e3c0de27a462)
Change-Id: Ia067cebfe35a9d2d7d2af8b4d1bd4cb5717372ae
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add CPU, DIMM and Motherboard inventory for Lanyang machine
Tested: Built the IPMI recipe then read the information of the CPU,
DIMM and Motherboard's inventory after power on.
(From meta-inventec rev: 9d47808f7e1a582a7001b11bb9419742b17d4a1c)
Change-Id: I0b550daa15bc9ab73948075e7cc1ac172612e88f
Signed-off-by: Brian Yang <yang.brianc.w@inventec.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
openbmc/bmcweb#5 tracks an issue with bmcweb and static
hosting of web files on IBM systems. Until this bug is
resolved, disable bmcweb from hosting the files.
Currently in the IBM layer, bmcweb is only used for redfish
support and the static hosting is not needed for the basic
redfish support to work.
Testing: Verified bmcweb now starts fine and responds
to redfish requests.
(From meta-ibm rev: 8891e02efa759bb3173a0985f194c1e9a0bc255b)
Change-Id: I1f1ac2008afdb787de6b034a71b6ed6b2d51422b
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fix Palmetto's recipes.txt.
(From meta-ibm rev: 543acb28fc1ee93a819de955f4a14dd5d0fee499)
Change-Id: Ibfe2724dc65122d23070396867a97064ac4e1124
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the kernel to the latest 4.17 stable release.
(From meta-aspeed rev: 76cf24ad58962b882bd28a6f8c55c30930c4db77)
Change-Id: Id1e482bbbba4b9cae6e882be99a47612862855ee
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the kernel to the latest 4.17 stable release.
(From meta-nuvoton rev: 8730f2ecb7acdc3bf27c20a4d9b6c70fad9eab11)
Change-Id: If07d6ce0942671cd112fa05713850d42cf55317e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update occ sensor names to make it consistent with Witherspoon.
Tested: Verify the sensor names are updated via REST API.
(From meta-ibm rev: fc7a1853fd16af0e58bcf104bd1f9585b1f36a20)
Change-Id: Ia2b31ecfd591c580d8ec382fe7d26b30fd34d427
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Barreleye was the first machine to be designed and built for the IBM
OpenBMC project.
It no longer builds and no one has stepped forward to maintain it, so
this removes it from the tree.
Resolves: openbmc/openbmc#2777
Change-Id: I4b2fd53f1a72fe5a5b7ed700dd451b98cebfa445
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The host team has requested a bump in their allocated log
size. Appears as if witherspoon has the filesystem space
to spare so bump up from the default of 16K to 256K.
Testing: Loaded on system and caused a lot of traffic in
host console and verified /var/log/obmc-console.log did
not grow beyond 256K and properly wrapped.
(From meta-ibm rev: 50ba839a2ee314b06b21273ff4a4a9456baef6d2)
Change-Id: Ie9a7f003778b3e38f7a444f32d69942bcfc1575b
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
CJson is a support library implementing json support for C libraries.
It is relatively small, and compliant enough for secure systems usage.
More information can be found in the CJson homepage here:
https://github.com/DaveGamble/cJSON
Tested by: "bitbake cjson" and saw no build failures.
(From meta-phosphor rev: 908d4f44184e34e0d13e6017221122ab5915a310)
Change-Id: I8b9fcbc5ce0ffe556da8bfa6b1d84c527160a65e
Signed-off-by: Ed Tanous <ed.tanous@intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested:
Package builds successfully and the output looks correct.
(From meta-phosphor rev: cb1a1831baa36b0e6bb5e199a333255f42d3593e)
Change-Id: I6aa75e0147793b13992bd05ac9efffbaef19c092
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update external subtrees to latest Yocto sumo.
Change-Id: I8364f32bef079841c6e57f1c587f4b1bedf62fef
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|