Age | Commit message (Collapse) | Author | Files | Lines |
|
This moves the OpenBMC kernel to a v5.15 base. There are 73 patches in
the tree, not counting changes that were merged in v5.16 which have been
backported.
Andrew Jeffery (10):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ARM: dts: tacoma: Clean up KCS nodes
leds: pca955x: Make the gpiochip always expose all pins
leds: pca955x: Allow zero LEDs to be specified
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (8):
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
spi: fsi: Print status on error
spi: fsi: Fix contention in the FSI2SPI engine
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (4):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
ARM: dts: nuvoton: gbs: split SPI flash partition
ARM: dts: nuvoton: gbs: Change the name of the partitions
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: dts: ast2600evb: Enable EHCI controller
ARM: configs: aspeed: Add openbmc kernel options
ipmi: bt-bmc: Use registers directly
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
William A. Kennington III (1):
net: npcm: Support for fixed PHYs
Change-Id: I8c26f71ba75e4f8d8b5697b81f8c73c0d77aae8e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Patches from the v5.16 kernel relating to FSI, OCC and SBE FIFO.
Eddie James (7):
fsi: occ: Use a large buffer for responses
fsi: occ: Store the SBEFIFO FFDC in the user response buffer
docs: ABI: testing: Document the OCC hwmon FFDC binary interface
hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs
docs: ABI: testing: Document the SBEFIFO timeout interface
fsi: sbefifo: Add sysfs file indicating a timeout error
fsi: sbefifo: Use interruptible mutex locking
Change-Id: Iab76e0b1cf658334d8ab0f43bb6c3d1b8912f7a5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I8d692e2eb6d65aaa9da461efeb1d210247392920
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I76cbbf0ed45d8b9a523fb9c2c27d21dc1c03be3e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: Iadf9a75728ff8321a6745d843abe649adbb6cf19
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I8c92d4ef4489eeb6417b546be26f95ab7b07c38c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (7):
libpldm: Modify the validation check on ActiveComponentVersionString
fw-update: Implement inventory manager
fw-update: Implement firmware update package parser
fw-update: Implement DeviceUpdater
fw-update: Implement firmware UpdateManager
fw-update: Firmware discovery of MCTP endpoints
fw-update : Optimize passing infra parameters
Change-Id: Ie7aaed2129463d1c6247c37f56a2198b11705760
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Hieu Huynh (1):
Support chassis bootdev clear-cmos
Willy Tu (2):
dbus-sdr: prevent handler registration if dbus-sdr is enabled
dbus-sdr: Remove the use of undocumented Inventory.Decorator.FruDevice
Change-Id: Ia4dd1b7eea993cdc8e33fc0e1d8f7cc398b3dee4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sumit Kumar (1):
PEL: Set commit time for archived pels
Change-Id: I75571aa4044ee85404530055804aedbf609df56a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zane Shelley (1):
Temporary filtering for checkstop root cause attentions
Change-Id: I6c1256fc2cecaac30e7183d7734e394b85ba178f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brandon Wyman (3):
psu-ng: Refactor EXPECT calls for PMBus STATUS_*
psu-ng: Add code to detect VOUT_OV_FAULT
psu-ng: Change fault traces from INFO to ERR
Shawn McCarney (2):
regulators: Treat missing VPD keyword as empty
regulators: Allow empty expected VPD value
Change-Id: Ifc2953ba12251e6a8dc9ea51633bc3faf0eb7c60
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Eddie James (1):
ffdc: Only proceed with PEL creation if there is an error
Manojkiran Eda (1):
Add OWNERS file
Matt Spinler (1):
Add proc IO Ring and core/IO ring DVFS sensors
Change-Id: I6e031270eafdc116ced25fd499cca9837f87e9ab
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This refixes of 905072f5c1d2f1e2bd99fb3346ee2978428b992b commit as pure
build without sstate-cache is still broken.
This commit moves the admin account creation from the standalone package
to the bitbake config file.
Change-Id: I6d4cfe41b1e6e2f5e707f4e942a8e4df93277e93
Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: Ia29a9dba4a87667ff7e35836d7c25bee16278a8f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I8c62e878ce13a0c153f9c794b7b4f2029e488909
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: Ie4e88dda3f8fbb12f22a6f045f02823de43a5d1a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Geissler (1):
op-continue-mpreboot: ensure it runs after start_host
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I50c38916c9ddf8de5fdd66572b76e713c2e620a4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (2):
Update .clang-format file & clang-format-12 changes
Add OWNERS file
Change-Id: Ie8b6ba8824533e8b3ba089065b067630a02e547a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ben Tyner (1):
Attn: Properly handle hostboot TI with EID/PLID
Zane Shelley (1):
update OWNERS file
Change-Id: I82be0e10d9778df9d222f654c0ae13a5b6dc8b22
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I93c7138a290f89f76989f116ae07c5028626ed6c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zhikui Ren (1):
Add doc links in readme
Change-Id: I0cb27b70d4936de800691583d00945423872568f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zane Shelley (1):
update OWNERS file
Change-Id: I4987e1b77543d4994c3dc6219e6860d6837bf341
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matthew Barth (1):
control:actions: Replace `speed` with `target`
Change-Id: Ib3fce1146df4b40daa3d6396f5cf72e77bed7fce
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brad Bishop (1):
pldmtool: platform: getpdr: form proper JSON
Tom Joseph (1):
tools: Extend support for ComponentOptions
Change-Id: I67babd88c7e6868123c21e79ffca65f01cca334a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Jeffery (1):
astlpc: Force FW2AHB to map reserved memory
Brad Bishop (1):
core: check n_busses before transmit
Change-Id: I9702b4fe8ee7abe6db8d057bd3801da14c3c4547
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I8affa79f6c17d0eda23c960807c2c2ac0e0eec45
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Willy Tu (1):
build: Add meson build
Change-Id: I367b44a96cdd9abc2ea314a7242fbb9e6f5e94c0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (2):
io_uring: Add function to reserve file slots
build: Fix multiline string warning
Change-Id: I4441a525819bac996111e05cda3fc2abcf236019
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brandon Kim (1):
CpuCore: Update Microcode type to uint
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I1db255bc9bbd837ee9c5a7c1b1b2b11e30c085df
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I3175b35824ed1e9ffb9ea70888daa1cc12b1c376
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Ed Tanous (1):
Rearrange meson file and remove redundant tests
Krzysztof Grobelny (1):
Revert "Use AsyncResp in retrieveUriToDbusMap"
Change-Id: I7557921769c78d542a9dd94e50ca4929d75eab91
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brandon Wyman (3):
psu-ng: Use a separate map for required PSUs data
psu-ng: Clear the additionalData each loop
psu-ng: Detect CML fault
Change-Id: I2c37cd4806529a304eb4eb91511d4c480cf0fa17
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jie Yang (1):
dbus-sdr: Add sensor mutability
Johnathan Mantey (1):
Return invalid argument error code when assigning IPv6StaticAddreses
Change-Id: If6a60c0d35bd2c7cd67e223647604ae0c8bbabad
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This includes security and bug fixes from the 5.14.11 through to
5.14.15 stable releases.
Change-Id: Ida64acaa1f9c7c26d987fa7979ef29320924f2f0
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Adriana Kobylak (1):
ARM: dts: aspeed: rainier: Add power-config-full-load gpio
Eddie James (1):
spi: fsi: Print status on error
Joel Stanley (2):
ARM: dts: aspeed: p10bmc: Define secure boot gpio
ARM: dts: aspeed: rainier: Remove remaining PCA955X_TYPE_GPIO
Change-Id: Ibbfc482ba2ee1a008006875d6065cc36d7c7da20
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I7baeec6ca85478efeee3ee8ef80536527abc6890
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
William A. Kennington III (1):
example/delayed_echo: Fix bogus compiler warning
Change-Id: I94c554e4ba7fd4553f86806e6615de38a89369ca
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Patrick Williams (2):
catch exceptions as const
MAINTAINERS: fix syntax
Change-Id: I0033cb14e5b363027ba70fbe9e631e7df87e99e3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brad Bishop (2):
net: Client.Create interface from SNMP project
pcieslot, cpu: add upstream_processor association
Brandon Kim (2):
Cpu: Add EffectiveFamily and update Model to EffectiveModel
Cpu: Update Step and Microcode type to uint
SpencerKu (1):
Add "GenerationInUse" and "GenerationSupported" to PCIeDevice interface
Willy Tu (1):
Software: Settings: add setting to Software interface
Change-Id: I8738ed8ae1f9fe7fb16bc4e54d8b34c6fbbed4c3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brandon Wyman (2):
psu-ng: Include STATUS_INPUT in input fault error
psu-ng: Make comm fault first checked
Change-Id: I43987d763e3cc4256cac12c84a015bf7f1198fe1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Charles Boyer (1):
cpu: Add support for ARM family
Change-Id: I866f7b70bc6624cf946f617861c88d8be287ed58
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I7d7b47724d673c5ec33a0e9f055a810362ec2bab
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I3aeb2831176876a8a0e724f7cc2f3ab35b468373
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Jeffery (1):
libmctp: Remove MAINTAINERS in favour of OWNERS file
Change-Id: I0a50698f6326d8d7c390a70f4e610fbe9a5fc57b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I747765564ad6ef52d52a878ce128bfe0f4d3372d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Patrick Williams (1):
use Create interface from phosphor-dbus-interfaces
Change-Id: I2005ae3af1c72dcfb5e585d21db698c46b64d1be
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Brad Bishop (1):
pldm_visualise_pdrs.py: use a generator
Change-Id: I6894273199ab564df4d99903755baf7a1bfb81b8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: Ib21f7e74683dd0f8f7afe5d63a3ae61e7c7e7b13
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I95f3dfce0439fd16b29c52007bfdc7bbfcc4a6a0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: Icfdb7eb69a9b61bd8fff5a28e7e9a6fdf8d50737
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|