Age | Commit message (Collapse) | Author | Files | Lines |
|
Adrian Bunk (1):
xmlrpc-c: Remove the RDEPENDS on perl
Denys Dmytriyenko (1):
mariadb: update SRC_URI to use archive.mariadb.org
Khem Raj (7):
xorg-fonts-100dpi: Change License Custom -> MIT
fio: Depend on coreutils-native for fmt utility
fio: Fix build when march is armv7ve
pmdk: Update to 1.7
README: Document need for 32bit compiler
mongodb: Turn system libpcre support into packageconfig
grpc: Update to 1.24.1
Otavio Salvador (1):
modemmanager: Upgrade 1.10.2 -> 1.10.6
Palmer Dabbelt (1):
Add zeus compatibility to all layer.conf files
Peiran Hong (1):
tcpdump: upgrade 4.9.2 -> 4.9.3
Stefan Agner (1):
zram: properly implement systemd service
Stefan Wiehler (1):
nvme-cli: upgrade 1.6 -> 1.9
Trevor Gamblin (2):
gnome-desktop3: upgrade from 3.32.0 to 3.34.0
freeradius: add -latomic for armv5
William A. Kennington III via Openembedded-devel (1):
log4cpp: Stop using RC as a variable
Change-Id: I9b3bd69a061da11a59d38bce42543cb090b24601
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-quanta rev: 8274d4054b3f6e772f26f944227542e3f72d562a)
Change-Id: If782a70491c9f42ba65cc80d7cfeda20be2d8cfc
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
TFTP is already support within bmcweb via Redfish and by default that
was disabled. We need to enable it by default on fp5280g2 machine
Testd: Updated successfully via the following Redfish
curl -k -H "X-Auth-Token: $token" -X POST
https://${bmc}/redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate
-d
'{"TransferProtocol":"TFTP","ImageURI":"<ip address of TFTP server>/obmc-phosphor-image-fp5280g2-20190924042243.static.mtd.tar"}'
(From meta-inspur rev: a39ad069b6d9b0f9021495661da077a07ead1132)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Ic6b2e44b0680e4f4472e702aa51bff1416f6b944
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
To allow thermal modes to be selected at BMC standby, the fan control
application must be running. The phosphor-fan-control@.service file is
needed to start fan control at BMC standby and the
phosphor-fan-control-init@.service is no longer required.
Tested:
Witherspoon phosphor-fan-control@.service replaced in image
phosphor-fan-control-init@.service removed from image
fan watchdog configs appended to fan control service still
phosphor-fan-control@.service started at BMC standby
fan control thermal modes presented/changeable at BMC standby
no function change in configured thermal modes
(From meta-ibm rev: f59761e1af85b3ae6432bf0297f5cfe5be71e557)
Change-Id: I4a946f58b6f0c22ebd402304ae9d8fd17a197571
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Per review comments, change device paths to symlinks thought to be more
stable.
(From meta-ibm rev: ad75a64d9b120f9b9ed0453acca1da2bf119e78e)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I925dac346368a0a40fa64948ac7f640c33f15019
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
With the resolution of CVE-2019-6260 the SuperIO scratch registers that
hostboot-settings uses cannot be read from the host.
This means it is not being used, so we can remove it from the build.
(From meta-openpower rev: d6124f416c014e1710c17b5d7c2fd90f85a2d0ca)
Change-Id: I508555ba063fa08f322f66ee2ce88bd15e500d97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a specific interface for the Cpu and Dimm`s FRU properties and find
all Cpu and Dimm`s paths below the `/xyz/openbmc_project/inventory` path
thought this interface.
Testd: Saw the addition of `xyz.openbmc_project.Inventory.Item.Cpu` or
`xyz.openbmc_project.Inventory.Item.Dimm` interfaces via the D-Bus command.
busctl introspect xyz.openbmc_project.Inventory.Manager
/system/chassis/motherboard/cpu*
or
busctl introspect xyz.openbmc_project.Inventory.Manager
/system/chassis/motherboard/dimm*.
(From meta-inspur rev: 65a4f861c7adbbbc6b4ab8308beaea1c8b4fab5f)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I8d89316be4308d6eb57cf8899d44cc78df5a9b6d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Kun Yi (1):
Makefile.am: Fix mixed tabs and spaces
(From meta-phosphor rev: d429dc27127aec05bc812fa79f45a0ea35e72eb7)
Change-Id: I770f31f193a4ab1496be79ba64d6d69da22bf3b3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Dixsie Wolmers (1):
Fix date and time settings bug
Zbigniew Kurzynski (1):
Enabling multiple TrustStore Certificates uploading.
(From meta-phosphor rev: 020fab0b523b6963f46c85e34dbe4ba4ed3d3c60)
Change-Id: I43c7ef1d90336ea9ab71af98cc1c85fc9715c507
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
Fix MaxConcurrentSessions property of GraphicalConsole
(From meta-phosphor rev: b66f6814d709ae452a28f9648d48b82dacad52b6)
Change-Id: If2412a007155d1ff6591e781dc8b0c09a6291ed1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (2):
ARM: dts: Aspeed: Tacoma: Add gpio-key definitions
ARM: dts: Aspeed: Tacoma: Add watchdog definitions
(From meta-aspeed rev: feb281f50d1867549272667deb56208e6eac8c35)
Change-Id: I3c32d038801413e11b71d326b61cb7c4e2737834
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.2, 5.3.3, 5.3.4 and
5.3.5 stable releases.
(From meta-aspeed rev: 050d1393f2b8254958a069e20ac135e93ce03a19)
Change-Id: Idbde30a1ed0cd57e7abd7906095e9ab5f8a080e4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Ratiu (1):
renderdoc: add x11 to REQUIRED_DISTRO_FEATURES
Callaghan, Dan (2):
firewalld: update to 0.7.1
strongswan: install dev headers
George McCollister (1):
wireshark: fix qt5 build
Jean-Marie LEMETAYER (1):
python-toml: add recipes for python2 and python3
Khem Raj (1):
xscreensaver: Remove xserver-nodm-init rdep
Maciej Pijanowski (1):
smem: package smemcap separately
Ovidiu Panait (1):
kea: Disable parallel install
Peiran Hong (1):
zabbix: upgrade 3.0.9 -> 4.2.6
Randy MacLeod (1):
libteam: update from 1.28 to 1.29
Trevor Gamblin (2):
php: fix CVE-2019-6978
gd: fix CVE-2019-6978
Change-Id: I2c308ff46213876c1d74f42b5d9f9e52946bbf02
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (1):
json-c: Don't --enable-rdrand
Alessio Igor Bogani (2):
wic: Using the right rootfs size during prepare_rootfs
rootfs-postcommands: Avoid use of an hard-coded value
Alexander Kanavin (1):
binutils: drop UPSTREAM_VERSION_UNKNOWN
Alexandre Bard (1):
systemd: Expose resolv-conf alternative only when resolved is built
Andre McCurdy (1):
ffmpeg: enable more verbose build logs
André Draszik (4):
ruby: drop long-merged CVE patches
ruby: configure mis-detects isnan/isinf on musl
ruby: fix non-IPv6 support
packagegroup: fix a comment regarding PACKAGE_ARCH
Bruce Ashfield (6):
linux-yocto/5.2: update to v5.2.13
linux-yocto/4.19: update to v4.19.72
linux-yocto/5.2: update to v5.2.14
linux-yocto/5.2: update to v5.2.16
linux-yocto/5.2: update to v5.2.17
yocto-bsps: update to v5.2.17
Böszörményi Zoltán via Openembedded-core (1):
classes/image-live.bbclass: Don't hardcode cpio.gz
Changqing Li (2):
devtool.py: change to do clean before remove-layer
devtool.py: fix buildclean test
Chen Qi (1):
systemd: fix NFS regression
Dan Tran (1):
unzip: Fix CVE-2019-13232
David Reyna (2):
bitbake: toaster: issues in import layer when clicking 'add layer'
bitbake: toaster: improve warnings when adding dependency to packages
Diego Rondini (2):
initramfs-framework: fix var name
initramfs-framework: support PARTLABEL option
Douglas Royds (1):
icecc: Don't use icecc when INHIBIT_DEFAULT_DEPS is set
He Zhe (1):
ltp: Fix hang of cve test cases
Heiko Schocher (1):
kernel.fitimage.bbclass: remove ramdisk_ctype
Jacob Kroon (1):
bitbake: tests/data: Test combinations of _append together with override
Joe Slater (1):
bash-completion: add image feature
Jonathan Marler (1):
package: Multiple shlib_providers for the same file should error
Joshua Watt (8):
classes/reproducible_build: Move SDE deploy to another directory
oeqa: Test multiconfig parsing
bitbake: cookerdata: Add mc conffiles hashes to cache hash
bitbake: hashserve: Add missing import
bitbake: siggen: Fix attribute error when hashserver fails
bitbake: hashserv: Don't daemonize server process
local.conf.sample: Add Hash Equivalence
classes/reproducible_build: Create SDE destination
Khem Raj (7):
musl: Fix riscv64 CAS functions
qemuriscv: Do not blacklist clang anymore
sdk: Install nativesdk locales for all TCLIBC variants
strace: Upgrade to 5.3
packagegroups: All groups are not allarch
musl: Fix __riscv_mc* containers to match glibc
core-image-sato-sdk-ptest: Remove valgrind ptests for riscv
Konrad Scherer (1):
gen-lockedsig-cache: Replace glob lookup with hash to filename lookup
Lei Maohui (1):
bluez5: update patch to fix do_patch error when PATCHTOOL = "patch".
Li Zhou (1):
shadow: use relaxed usernames for all
Limeng (1):
u-boot: add CVE patches for u-boot
Nathan Rossi (2):
oeqa/core/utils/concurrencytest.py: Handle exceptions and details
oeqa/core/case.py: Encode binary data of log
Niclas Svensson (1):
devtool: finish: Keep patches ordered when updating bbappend
Otavio Salvador (1):
mesa: Add freedreno PACKAGECONFIG option
Peter Kjellerstedt (3):
systemd: Make it build with hwdb disabled
devtool: finish: Add suppport for the --no-clean option
lib/oe/lsb: Make sure the distro ID is always lowercased
Randy MacLeod (1):
ffmpeg: update from 4.2 to 4.2.1
Richard Purdie (17):
Revert "meta-extsdk: Either an sstate task is a proper task or it isn't"
sstatesig: Fix hash equivlanency locked signature issues
oeqa/selftest/signing: Fix for hash equivlance server
lib/sstatesig: Fix class inheritance problems
populate_sdk_ext: Fix for hash equiv
bitbake: runqueue: Fix task migration problems
bitbake: siggen: Ensure setscenetasks list is available to worker context
bitbake: runqueue: Change task migration behaviour for rerunning setscene tasks
bitbake: siggen/runqueue: Fix signature mismatch issues
bitbake: siggen: Avoid writing misleading sigdata files
bitbake: runqueue: Save unihashes more frequently
bitbake: runqueue: Small performance optimisation
bitbake: siggen: Remove full path from unitaskhashes keys
bitbake: tests/runqueue: Fix hashserve shutdown race
base: Improve module import error message
sanity.conf: Bump minimum bitbake version
bitbake: bitbake: Bump verison 1.43.1 -> 1.43.2
Robert Yang (6):
cases/bbtests.py: test_bitbake_g(): Check base-files rather than busybox
expect: Fix configure error for nativesdk
net-tools: Fix installed-vs-shipped for nativesdk
expect: Fix buffer overflow error when build in long path
apr: Check for libtoolize rather than libtool
lttng-ust: Fix for --enable-python-agent
Ross Burton (12):
oeqa/selftest/reproducible: test ipkgs too
distcc: clean up the UI install logic
distcc: use --enable-tcp-insecure instead of --make-me-a-botnet
distcc: split into client and server packages
json-c: clean up recipe
json-c: use GitHub for upstream release checking
bitbake: fetch2/git: refactor check for git-lfs command
bitbake: tests/fetch: add test case for git-lfs handling
python3: move runpy to core
pango: fix the failing testiter test case
opkg: remove redundant systemd inherit
lttng-ust: update patch Signed-off-by
Trevor Gamblin (5):
python3-subunit: ensure runtime dependencies are present
python3-pip: ensure pickle is installed
lighttpd: remove fam as a PACKAGECONFIG option
tiff: fix CVE-2019-14973
opkg: remove pathfinder PACKAGECONFIG option
Wang Quanyang (1):
kexec-tools: fix arm kexec failure for __NR_kexec_file_load
Yi Zhao (1):
python: add tk-lib as runtime dependency for python-tkinter
Change-Id: I0570125d49f7e4bc3bbf70508cbfd7e10bdbc032
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
OE-core master will be dropping warrior soon; zeus is the next release.
(From meta-ibm rev: 9c8d1b961e1185ab2e7eabf6f6b42754fcb57db0)
Change-Id: I791f06ddb596584d1a566657a38ad6eb13692521
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The IPMB channel communicates with ME from the host.
(From meta-quanta rev: 34964359eca0e4e924b4c7191aea411e3aa7f3e4)
Signed-off-by: kfting <kfting@nuvoton.com>
Change-Id: Iac56c5feb455c66b7ae322ba33806b575972495b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ratan Gupta (1):
Allow static configuration of NTP and DNS in DHCP mode
(From meta-phosphor rev: 43cf77ab7c0e7021793dd7e187d13903e04fb2b1)
Change-Id: I98542d52475ebe4e16735d43ca83d3825c6515fa
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yoshie Muranaka (1):
Clean up icons
(From meta-phosphor rev: f701952fa9a6da8fcc0340c541e61a3a6285f27e)
Change-Id: If48e88d1263f6d7d33a82acd154a2a1f49262947
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (1):
obmcutil: Implement --verbose
(From meta-phosphor rev: 9cfd00ada4e9a0f3a89a9e1c2dbb1d9a84774899)
Change-Id: I749b6229d37e4af1bba81f12517f2c0fa52e9b58
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ratan Gupta (1):
Fix crash during GET of manager network protocol
(From meta-phosphor rev: 2cf47fdfa18d3891b5f541d37a43e31f54d21304)
Change-Id: Id78f6bff3b1808e22dc8b83d0bf52938b8a05ada
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-yadro rev: 25631eaa5a8c6b4542555aff48a8fc3865956d43)
Signed-off-by: Artem Senichev <a.senichev@yadro.com>
Change-Id: I5003c0f741333d4c0301fa0707dd83d2edf8c127
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable phosphor-pid-control to control FAN tach according eight temperature sensors.
There are six FANs in RunBMC and all controlled by PWM1, thus we only define one fan type sensor in .json file.
Consider FAN tach might be stopped then cause RunBMC sever hang, FAN tach will turn into full speed if swampd daemon dead unexpected.
(From meta-quanta rev: 1689d1e7e4ed67560f73eee673a06b25cb346e60)
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I52db7eeff8abd1573ee9b4a61bd6af4a1b624d9a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
On witherspoon-tacoma the GPIO that specifies if the system is water
cooled is Q7 (135). Update phosphor-cooling-type's config file
appropriately.
(From meta-ibm rev: 5d62a1c264bd72d9070e046a5ec10ad9b8715392)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I63131a81ecb984e7746e54a98c539a52d887e155
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The check_pnor_format checks if the PNOR is formatted as UBI,
so it should only be added if the UBI feature is enabled.
(From meta-ibm rev: 091f26661b09c9d0a6f6b632b40cc8a84eac25c3)
Change-Id: Ief252652cd347a0bf4a8f8eb592672d0e9740514
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
For the witherspoon-128 machine, add a kernel patch for a
witherspoon-128 devicetree that includes the upstream devicetree but
sets the proper flash node attributes. This will keep the devicetree
better in sync with the upstream one.
(From meta-ibm rev: f7f93979873dc762aa9676a4a8714806d12f638f)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: I6ff03cbfd80a9df1b139625fb11b16b7684b4aa5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ed Tanous (2):
Fix role map persistence
Revert "Add Storage Schema for NVMe on Redfish"
Nikhil Potade (1):
Add Storage Schema for NVMe on Redfish
(From meta-phosphor rev: 5f1920e437f8328763c23a3d76835370a5d09730)
Change-Id: I4dbda9915686449100cd15f739c538a038a983f3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (5):
clk: ast2600: Fix enabling of clocks
ARM: dts: aspeed-g6: Add VUART descriptions
ARM: dts: aspeed: tacoma: Enable VUART1
ARM: dts: tacoma: Remove incorrect i2c buses
ARM: dts: tacoma: Enable LPC Firmware region
(From meta-aspeed rev: 5463a8aefd99c9302d6bf40380265c2822a3b9e1)
Change-Id: If912f33a59f4d4c65fbd82421ce268803972790c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
- Modify gsj-ipmid-whitelist.conf for the gsj project.
- Enable whitelist by default.
(From meta-quanta rev: 7f62bc2c5a71b9275b8b636dd6daad000288b2f4)
Change-Id: I52363809de53fabb0c6609e0bc564bdcd69c2e75
Signed-off-by: P.K.Lee <p.k.lee@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
It is not yet supported in the kernel.
(From meta-ibm rev: 37b0344925323c3de0bd86fd00ea075e383153da)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ie09afb9a4ee1d96d7b2a70fe79ef9a85d8971ea2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
New features since v2.2:
- Support for using the SBE to read/write memory
- General SBE chip-op support
- Cronus backend
- Fixed for clang
- Default device-tree selection for applications
- Bugfix for newer OpenBMC kernels using alternate FSI paths
(From meta-openpower rev: 42f47f251fabfbc1c19d0616a429be48f6a6918d)
Change-Id: Id602f80f8fb87b3258c3b4d4bd72a5c2b3f6ecda
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This new service will monitor for default phosphor systemd targets and
log errors
Tested:
- Verified basic function in Romulus QEMU
- Verified no error logged during boot, bmc reboot, or power down on
witherspoon
- Verified when service fail injected, appropriate error was logged on
witherspoon
(From meta-phosphor rev: e36b727c20c433cc02a5e9415b7df867e8443512)
Change-Id: I8a3ab440f67f7e9b3a682d8645c34fa446a6119f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
With introduction of HIOMAP function, this is no longer needed
(From meta-openpower rev: 3f3edac739961e7d9f632d04a13450ee42456a4a)
Change-Id: I4fb7390938fd44ab38cf6f583adb7901a1ffe020
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add an empty entity map json file. The file is expected to be an array,
if it is present at all. The file provided by default has no real
meaning to your system, therefore you are expected if you use the entity
records, to provide one for your system.
See: https://github.com/openbmc/phosphor-host-ipmid/blob/master/scripts/entity-example.md
for details on how it should be formatted.
Currently formatted:
[{
"id": 1,
# Container entity contains other entities
# Entity Id and entity Instance for the container entity
"containerEntityId": 13,
"containerEntityInstance": 81,
# A record can have contained entities as a four entry list or as upto
# two ranges of entity instances; this record has contained entities
# as a four entry list
"isList": true,
# Records can be linked if necessary to extend the number of contained
# entities within a container entity; this record is not linked
"isLinked": false,
"entities": [
{"entityId1": 10, "entityInstance1": 1},
{"entityId2": 10, "entityInstance2": 3},
{"entityId3": 10, "entityInstance3": 5},
{"entityId4": 10, "entityInstance4": 7}
]
}]
(From meta-phosphor rev: 34d8886d6642eb0b991b696f4d28950c5bec9bf5)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I00956c92d444ac82d4a9aabfd33c26ccbb58e145
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable BIOS POST CODE functionality for NPCM7xx BMC in phosphor-host-postd.
We need to modify SNOOP_DEVICE = "npcm7xx-lpc-bpc0", due to default SNOOP_DEVICE is using aspeed BMC.
(From meta-phosphor rev: ae30116e34c5ee4a1a10ff877192a0a633d84e9f)
Signed-off-by: Tim Lee <timlee660101@gmail.com>
Change-Id: I06e05d62a9c1b810620d3292b13e5a244851b061
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Utilize the pgood property as a precondition to loading fan control
events based on property states other than the OCC active events. Since
the OCCs are not active when powered off (pgood = 0) those events having
OCCs active as a precondition are not necessary to be added.
This is the first step to enabling fan control to run at BMC standby.
When the default phosphor-fan-control@.service starts after power on,
the pgood property value is already set to 1. Therefore this produces no
change in fan control activity.
Tested:
No change in fan speed control
(From meta-ibm rev: dadf39cdbb093e0c2566189f3e876dd3c01e13d0)
Change-Id: Ieb010804d59ed318463fca1fcbdce5b5123b81df
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the witherspoon-tacoma system. May bring this
back in some day for testing purposes but there are no near term plans
to use or support this.
(From meta-ibm rev: 3e11092404f8512241209c4ea26988171cf35263)
Change-Id: Ibb0bc351504070661179491d07f3af144cc97602
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainer power-on configuration support and remove unused GPIOs.
(From meta-ibm rev: 114bd7308d03fe7949517cd939b6dd9f575d59cb)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I29df80c5d446ebcba929cef334f06969c258f5d9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add Rainier system power sequencer configuration file.
(From meta-ibm rev: 65ba7af3ef1f36b4b77c5776478b59d1a7bf2334)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: Ia55257b24e1e5095bbd9db24fbf67e5968c4f9cc
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (1):
networkmanager: Correct the upstream version check
Adrian Ratiu (1):
renderdoc: add new recipe
Changqing Li (1):
kea: upgrade 1.5.0 -> 1.7.0
Denys Dmytriyenko (1):
rwmem: add recipe
Hongxu Jia (1):
lvm2: fix run lvcreate hung while PACKAGECONFIG udev
Jackie Huang (6):
python-versiontools: add recipes for python2 and python3
python-pymysql: add recipes for python2 and python3
python-statistics: add new recipe
python-pyperf: add recipes for python2 and python3
python-pika: add recipes for python2 and python3
python-pycurl: add recipes for python2 and python3
Khem Raj (6):
openipmi: Mark libOpenIPMI.so.0 as private lib in openipmi-perl
ttf-gentium: Use OFL-1.0 version of OFL license
ttf-hunkyfonts: Use LGPL-2.1 which is correct version from LICENSE file
python-configparser: Mark license as MIT
fontforge: Upgrade to 20190801 release
opensaf: Fix duplicate copies of shared libs in package
Martin Jansa (2):
spice: ignore all warnings not just address-of-packed-member
Revert "spice: Drop broken native"
Otavio Salvador (5):
networkmanager: Fix ADSL plugin packaging
networkmanager: Add a `resolvconf` PACKAGECONFIG
networkmanager: Add sysvinit support
libqmi: Upgrade 1.22.2 -> 1.24.0
modemmanager: Upgrade 1.10.0 -> 1.10.2
Qi.Chen@windriver.com (1):
protobuf-c: fix race condition
Robert Yang (2):
corosync: Fix PACKAGECONFIG flag for rdma
net-snmp: Fix PACKAGECONFIG for perl
Zang Ruochen (1):
python-urllib3: upgrade 1.25.5 -> 1.25.6
Change-Id: I20029cc79a225f6ab8f1b133ebc16129b7b32082
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ipkvm is not needed for the rainier system
(From meta-ibm rev: 556f78bc1a4c0d02496e79754fa6fa7147c98e02)
Change-Id: I79f19dca7024025efcbe25ac3a55df9bf047bcbb
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (1):
ARM: dts: aspeed: tacoma: Enable iBT device
Joel Stanley (1):
usb: gadget: Quieten gadget config message
(From meta-aspeed rev: 5d1af51495b016e385a6a2164d38770939226f11)
Change-Id: I78a4267d9a974b640acd07f5388e5885194cadf9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
Prevent excessive journal logging by wakeup signal
(From meta-phosphor rev: 6383ea303593962e9aea0504fa4abb55b10b371f)
Change-Id: I8b45dcb23faa410f1e391fc91b3d423f336e86de
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
PEL: Support for going between PELs & registry
(From meta-phosphor rev: 1c6191107ee506ac932f67a2af43ec1671944a72)
Change-Id: I390523465102091210f865b0389c13ceb1c591e5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Peter Lundgren (1):
Add more entity ids
(From meta-google rev: 5f6e2d2cf2227d026c72f845456c410c7a626439)
Change-Id: Iaf0b72a99ca5d2fb2abb9e5b8c3e7f6695078f1c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cédric Le Goater (3):
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
ARM: dts: aspeed: tacoma: Re-enable CS1
Ivan Mikhaylov (1):
watchdog: aspeed: add support for dual boot
(From meta-aspeed rev: 3369549492bf6b40f90cf14381ffc35e66250639)
Change-Id: Ia95b3ba3f1ba8a12d99660a458eb54cd2b1ddf73
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Fix Association interface
(From meta-phosphor rev: fcd89a6c6e0599059bfac3375a1f9a95efacb1f2)
Change-Id: I881e17dcce2ac20c9c598e8f63e7a7046279ae2b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Autojson all files
(From meta-phosphor rev: ac05b4ea06bfb76cccd3c303da7ba9deb669280a)
Change-Id: I9052ceb40598e1039a04e6731629e6abf9a60488
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ratan Gupta (1):
Remove the code which updates resolv.conf for dhcp supplied DNS
(From meta-phosphor rev: 4819265e8c6ff88d49aa25b4ecad3c7bb67e8702)
Change-Id: I2f3b12883a175057f18cf4d68328f7f11866bf55
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This system's GPIO layout is different than witherspoon's.
(From meta-ibm rev: e401c9560f4f7d85952d1630095df9ad784de0b2)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I4ed9f1de4b25258e791a514643863494a99fde3d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
jayaprakash Mutyala (1):
user_mgr: Adding priv-noaccess role
(From meta-phosphor rev: 7d4c8917ec4fa262d0b9e3987a24b767886534b9)
Change-Id: Ib6b4a28adff42c456c9473eeb1a96ecd085a81eb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|