Age | Commit message (Collapse) | Author | Files | Lines |
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
|
|
Zhikui Ren (1):
convert sysfs gpio usage to libgpod
(From meta-intel rev: 0c071ab85b21f967b0958836104f4dcb09024ce1)
Change-Id: I2ea7c7f8f2781c000ea17404c46514f7750c08f3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This moves the OpenBMC kernel to a Linux v5.4 base.
There are 161 patches in dev-5.4. Of these 69 are backported from
upstream, leaving 92 out of tree patches.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (12):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
Arnd Bergmann (1):
ARM: aspeed: ast2500 is ARMv6K
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (21):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (5):
i2c: aspeed: Add AST2600 compatible
hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
hwmon: (pmbus/ibm-cffps) Fix LED blink behavior
hwmon: (pmbus/ibm-cffps) Add version detection capability
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (13):
ARM: dts: aspeed: peci: Add PECI node
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (9):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed: ast2600evb: Enable FSI master
usb: gadget: Quieten gadget config message
clocksource: fttmr010: Parametrise shutdown
clocksource: fttmr010: Set interrupt and shutdown
clocksource: fttmr010: Add support for ast2600
watchdog: aspeed: Fix clock behaviour for ast2600
ARM: config: aspeed: Update defconfigs
Revert "ARM: dts: aspeed: peci: Add PECI node"
Johnny Huang (6):
pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config
pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux
pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file
pinctrl: aspeed: Use masks to describe pinconf bitfields
pinctrl: aspeed-g6: Add AST2600 pinconf support
Tali Perry (2):
dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation
i2c: npcm: Add Nuvoton NPCM I2C controller driver
Tomer Maimon (12):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree
dt-bindings: peci: add NPCM PECI documentation
ARM: dts: npcm7xx: Add PECI node
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 6d863dd22836673ccd2a5d40778a3d5e4e03d7ea)
Change-Id: I8f43925375c26bc88f94eee13430fcb03252b8ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Adjust the PSU related log level
(From meta-phosphor rev: d34272236883488bffbeeca67b85bdbce77843a6)
Change-Id: Ib4fcbcd3e7c468182120c5a88b5cd9a094f4d2cd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Armin Kuster (6):
meta-security: add layer index callouts
meta-security-compliance/conf/layer.conf: fix typo
python3-suricata-update: update to 1.1.1
libhtp: bugfix only update 0.5.32
lib/oeqa/runtime: suricata add tests
suricata: update to 4.1.6
Philip Tricca (1):
tpm2-abrmd: Port command line options to new version.
Trevor Woerner (1):
tpm2-abrmd-init.sh: fix for /dev/tpmrmX
Yi Zhao (1):
libseccomp: upgrade 2.4.1 -> 2.4.2
Change-Id: Ic00ca8ac8ff5d3fbe0b79aa4a42243b197080f14
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
Make the max http request body size configurable
Ed Tanous (2):
Remove #include of self
Implement a TODO(ed) in comment
Jan Sowinski (1):
Connection and websockets fixes
Zbigniew Kurzynski (1):
Turning ON the mutual TLS
(From meta-phosphor rev: be7988f3c7e0a0cc5dd0d359ec4810a7da068eef)
Change-Id: Idf80dd08c2370f32902953fa73c813bc8a5910ed
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (2):
Users: Update Callback/NoAccess Role
Users: Role Table: Update ssh
(From meta-phosphor rev: 2c400bafce6097464d368d9314d8bd81abd7eb0d)
Change-Id: I6daf7a73f4c65c25a30d746cac94c016bef3eec5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
FruDevice: Don't scan Mux bus if root is in blacklist
(From meta-phosphor rev: 59c9c8853bfbe10e8333ef3743ec5767a4c234f0)
Change-Id: Ic4ec1b34e20aba2c5f0f64fae72dc2be08afca31
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
We aren't correctly escaping all of the specical characters based on the
systemd spec for unit name escaping. systemd provides a utility to do
this reliably, so use that instead of a custom implementation.
(From meta-phosphor rev: e1acbce6ac818e411cee8483c89ea6f7b0829162)
Change-Id: I239f396f92e6a6b94edcfe48084c41dcc292e1b7
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Johnathan Mantey (1):
Emit correct error code when "reserved" fields are modified.
(From meta-phosphor rev: 5ebd4e211c4948016916524792cbcd6ef955f089)
Change-Id: I2991c0dc0b4565a0564409b13e9a148051480a4b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Harisuddin Mohamed Isa (1):
PEL: Filled in PEL value descriptions
Matt Spinler (3):
PEL: Fix message registry schema typo
PEL: Add repo function to get a PEL FD
PEL: Add API to get the PLDM instance ID
(From meta-phosphor rev: a4c74aa783c9c286997d11eb3635145e2d4590b0)
Change-Id: I3205bb2fcd502310f1dc7c4428c3aa270d54d1fc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jason M. Bills (1):
Always return Message Tag and Remote Console Session ID
(From meta-phosphor rev: ed6472b27d2e81282fbddfce8853eca2698fe757)
Change-Id: Iebfe9bf0ceee53540f2872cceac0945d8b6629da
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
AppaRao Puli (1):
Fix: bug fixes in readJson
Jason M. Bills (2):
Fix $metadata/index.xml parse error
Consolidate regex calls when converting links
RAJESWARAN THILLAIGOVINDAN (1):
Fix authorization for LDAP users
(From meta-phosphor rev: 5e35dbbec02a84112d084a876f0b6d9c9b77e327)
Change-Id: I5bd851bbcb08b299ea1ddef17550d17a4cce41ae
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Wiktor Gołgowski (1):
User logged in when IsAuthenticated cookie is set.
(From meta-phosphor rev: 0ef53041cf7efdc6e0bd81636ed2ccfc65b8368b)
Change-Id: Ic859b2d93be25901c43be029910a00e9a6bc900c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Artem Senichev (4):
Allow using fsp-trace from current directory
Fix parsing "Creator subsystem" field
Add source file name to fsp-trace output
hostboot: bump version 3920d160..0921b80a
(From meta-yadro rev: 1e65c1adfc33232d89e9deb50e436c2356317f6a)
Signed-off-by: Artem Senichev <a.senichev@yadro.com>
Change-Id: If56a76133bb9fff94638fafe5428969797b257a8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Linux kernel userspace headers must be installed, not included
directly from the kernel source tree:
The correct way to package the header files for a distribution is to
run 'make headers_install' from the kernel source directory to install
the headers into /usr/include and then rebuild the C library package,
with a dependency on the specific version of the just installed kernel
headers.
(From meta-phosphor rev: 3c315a34f2763f1932c6a8c12d7d12874a51aedb)
Resolves: https://github.com/openbmc/openbmc/issues/3634
Change-Id: I308de6697a731ec184d45f72e9428c697f788864
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
AppaRao Puli (1):
Firmware update commmands re-write
anil kumar appana (1):
manufacturingcmds: added intrusionsensor status
jayaprakash Mutyala (2):
bridgingcommands:Move ClearMessageFlags to new API
oemcommands: Fix for status LED when Solidgreen
(From meta-intel rev: eed0e4132d33fdd0128634047e6829d89cd986e4)
Change-Id: I134f7eed7d9cba14060bb254059bf28321345af7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Zbigniew Lukwinski (1):
Limit access permissions for authority cert directory.
(From meta-phosphor rev: 4fbae2f0c26a1975d490c5b0ba46558ee73e6d4a)
Change-Id: Idf2e346f5559b69ea406feb3cc636a9d1542cd63
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tim Lee (1):
main: Fix BMC system stuck when doing enumerate state after host shutdown
William A. Kennington III (1):
main: Improve support for existing and new driver semantics
(From meta-phosphor rev: 7aa04211d94efaeb44e57907f2b780672393224c)
Change-Id: I60584a69b529504e0f379bacc81fd3b02df744ba
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (1):
Move ioctl header to common include path
jayaprakash Mutyala (1):
PSUSensor: Fix for PSU details
(From meta-phosphor rev: 868a1009b3071347c1ba02b255081262dc98732b)
Change-Id: I3a8f90c66f7b14774bfe6bd6a3ec87a11498eb1c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
vkaverap (1):
ibm-oem: libpldm: add APIs for for FileAck command
(From meta-phosphor rev: 33ae08bdbc05e9ac756352e326384e6b71ea9819)
Change-Id: Ib8ca07e9f75f4a6a45d8745b3bd160fe89dbcbd0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (1):
Update redfish-logging-in-bmcweb.md link
Zbigniew Kurzynski (2):
Fixing mTLS switches
Adding a new value to cookie
(From meta-phosphor rev: 39e63385f0b25f0e9fa0cbf7acd1710ccf282d06)
Change-Id: Ica53e4e06bffb655ef6d212d3ccaf1f83fb42dbc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Rashmi RV (1):
Fix: Handle exception during sol activate cmd
Yong Li (1):
Do not stop session in deactivate payload call
(From meta-phosphor rev: a7b5af5628ca06b3c20e2d99b5196d18bef7de0e)
Change-Id: I7dc6b72a3b2b68e62cd7939797fed4174fd01b34
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Reviewing GPIO function with engineering, BMC_DCM_ALL_RESET_N GPIO
should be handled differently. Remove BMC_DCM_ALL_RESET_N from Rainier
power-on GPIO configuration.
(From meta-ibm rev: de595e38e6c38729d7e0c7eb6925fe639cbb5b85)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I2fa2949b49d192b0a3a6a516c3ce9c49052dd3d7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
|
|
Before this change, the ast2600 binaries were built with the soft float
call convention, which allows them to run on systems that don't have
hard float FPUs.
Internally, this changes yocto to build like this:
CXX="arm-openbmc-linux-gnueabi-g++ \
-march=armv7-a -mfpu=vfpv4-d16 -mfloat-abi=hard ...
CPP="arm-openbmc-linux-gnueabi-gcc \
-march=armv7-a -mfpu=vfpv4-d16 -mfloat-abi=hard ...
Tested: Builds and boots on ast2600-EVB
(From meta-aspeed rev: 53e322518fe6f471663746934e38bf5d8143a501)
Change-Id: If8037c66301ca4a3588d10270fe8d2fc610bb195
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This reverts commit 66419549bc438ce800b9149ccae0ef02bf7e3bca.
This patch is still under development and as is breaks the build.
(From meta-ingrasys rev: df05e2d9f5843abf8cf4ef81a6b42752475ad6d8)
Change-Id: I2158c28a2033c2bcf5f8a9cded8e345e39d5df6b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Stanley Chu(1):
npcm7xx: invalidate L2 cache in lowlevel_init
Joseph Liu(3):
runbmc: don't reset all gpio bank if core domain reset
Revert "runbmc: don't reset all gpio bank if core domain reset"
runbmc: don't reset gpiom5 if core domain reset
(From meta-nuvoton rev: f90dac58bf0830ee2896c1ed2298e7cc58533b0d)
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Change-Id: Idf6efd0cd16d26e350d8b9761778957f0854e920
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Suryakanth Sekar (1):
Enchance the set specialuser password cmd for ASD
(From meta-intel rev: 65bcc1018e9702a6c1678b2b79550ff4ab83ccbf)
Change-Id: I85e274f5e6c8aa7493bcd62d6048aeb00910ee71
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
|
|
Since the SYSTEMD_ENVIRONMENT_FILE_${PN} defined in
obmc-phosphor-systemd.bbclass, and the phosphor-power_%.bbappend have
not inherit obmc-phosphor-systemd, so all of the
power-supply-monitor-*.conf are not installed.
Tested: Built fp5280g2 successfully and includes the
power-supply-monitor configs.
(From meta-inspur rev: 05c197192a813e5d276e9b2c0c7d4ac19f726b7d)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: Icd31b517536cd77ced911deb796c7c7549b0b480
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ramesh Iyyar (2):
Added feature flag instead of CHIPS
Enabled pHAL infrastructure to boot the host
(From meta-openpower rev: 4bb6ee298278d0dcb40d3050427cd82ca0e48a49)
Change-Id: Ia9f049f92829afc379003563a8dcbc87e61d496d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Our previous start_hwmon.sh script was not escaping the filenames
properly, resulting in configuration filepaths that differed from the
actual filepaths.
(From meta-ingrasys rev: 66419549bc438ce800b9149ccae0ef02bf7e3bca)
Change-Id: I4d7c634c8cbe0987ae4407d9fd1431ff16064119
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add a new PACKAGECONFIG option for enabling the network bridge data
transfer backend.
(From meta-phosphor rev: 23bb90e4e655008366d4aeb9918743de143b2457)
Change-Id: I1ea955129e757431cd1aea059a25dfd0d051477c
Signed-off-by: Benjamin Fair <benjaminfair@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
jayaprakash Mutyala (1):
PSUEvent:Fix for ConfigureError deassert eventlog
(From meta-phosphor rev: 166f4a1f204eaf9611ab6389dc364f9f4dc5a9b5)
Change-Id: I711d1a94a712396d3b7bb8f2708c49a187056d10
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Carol Wang (1):
Redfish: Support health status of firmware inventory objects
Joseph Reynolds (1):
Change PAM service_name for password changes
(From meta-phosphor rev: 62a575918839d6ff33e7fb7dcb54a89c26aa2af1)
Change-Id: Id7e23222d0da952bf7a3b7c77a3bc9de237c7eea
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.12, 5.3.13, 5.3.14 and
5.3.15 stable releases.
This is the final 5.3 bump. The openbmc kernel will now move to 5.4.
(From meta-aspeed rev: d3ba96954bb98db97c4c4bc2df730c547f17a391)
Change-Id: I3e3d4d3d1456bd00f91705a52eb1801fc6293168
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
i2c: aspeed: Prevent state corruption for IRQ with no status
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
(From meta-aspeed rev: 1dd494c9cdf700c0d0798412e93fef106512994d)
Change-Id: If896243ce9c0d58948e7882ab9dbe5257608c997
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This changes to a monotonic timer for log rotation, so it will
not be affected by changes in calendar time.
Tested:
Confirmed that the log rotation runs every 60 seconds.
(From meta-intel rev: 7b0ef8a7ffc02cfaac4b67ca321db8d3025aecaa)
Change-Id: Ica1aa3b3635e7273c65a08bf0fa40c9155318716
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
After adding the rsyslog bbappend some changes were not applied
because the meta-phosphor layer also has an rsyslog bbappend at
a higher priority.
This change makes meta-intel depend on meta-phosphor so that
recipes here are treated with a higher priority.
Tested:
rsyslog.conf override from meta-intel is applied.
(From meta-intel rev: 89efcbb081b11050f8532addd4521e17afede3d6)
Change-Id: I6e40e12129118743ad019ff126bcb6c40960cb7c
Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The power-supply-monitor configs were installed by
SYSTEMD_ENVIRONMENT_FILE_${PN}, which is defined in
obmc-phosphor-systemd.bbclass.
phosphor-power recipe does not inherit obmc-phosphor-systemd, results in
the files installed by SYSTEMD_ENVIRONMENT_FILE_${PN} are not installed
at all.
Fix this issue by inherit obmc-phosphor-systemd in the bbappend.
Tested: Verify the witherspoon build includes the power-supply-monitor
configs.
(From meta-ibm rev: d4374bf93e5927ccadb9de954384096ffb8590ec)
Change-Id: Iaa3a04694c7b591d349a32529a0afef16239203d
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Although 6 fanx_1 pwm targets are deleted, but fan0_1 fan1_1 and fan2_1
will have a default value that causes the issue to remain unresolved.
In this way, two Fans control the same pwm, but I think that our
current fan control event is controlled at the same time, so it does
not affect the fan control.
(From meta-ibm rev: c4ec0f10a091fe74f075d2033fe055b5bbd7d498)
Change-Id: I42647c92ffe5e20430cee28de6fd26e2716153d9
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set warning and critical values for PSU.
(From meta-ibm rev: 1b9796d85dd41e8675d0d03132cbff8dd74a1d47)
Change-Id: Ie16955f7548e9e6fa54cea2aff767a164abb76f3
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add led fault event, fault led will turn on when cpu or dimm or other
components fail
(From meta-ibm rev: f0aaa6f39f61366a6599d1e571f1eada4bf93b1c)
Change-Id: Ifdd49dab35d915cb7d9ff095e6571fba42801bba
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add dependency of libgpiod because intel ipmi oemcommands needs it.
(From meta-intel rev: dbcf01496610de03ab4adb54cc7c5e42d47a8fe0)
Signed-off-by: Zhikui Ren <zhikui.ren@intel.com>
Change-Id: I85c0619ab47d7ce3a485a46757dc7abe6d9a4e58
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The IPMI network out-of-band listen will bind eth1 network channel.
(From meta-quanta rev: a79eac1c5fa32c3a2536373be3bdf6870430c1f7)
Change-Id: Ie54afeec351ce388ff27a8e2a3feb5a1856203ad
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The olympus nuvoton have runbmc nuvoton module and olympus
motherboard FRU informations. The phosphor-ipmi-fru package
binds related informations.
(From meta-quanta rev: 6375cb97e6e70553df918b04bf9f7f4419e44678)
Change-Id: Iaa8db9ad2336f1752e5f0722ffd426bdec2d9f81
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Olympus-nuvoton commuicated with BIOS use KCS channel 1
Setting obmc-host-ipmi-hw use kcs protocol binding KCS1 device
in Olympus-nuvoton
(From meta-quanta rev: 1d11afbf135af12fbb7dd489ed529df7f3a08e31)
Change-Id: If4701303bb2d3ddc6259ba49d905f7a6621b8812
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (1):
DEVELOPING: Engage Redfish before adding OEM
James Feist (2):
ProcSummary: Use Nothrow
Revert "Fix authorization for LDAP users"
RAJESWARAN THILLAIGOVINDAN (1):
Fix authorization for LDAP users
Suryakanth Sekar (1):
bmcweb: Message entry for At-Scale Debug Event
(From meta-phosphor rev: c541392ffa9da9c4388923f656118c0d5dd26e84)
Change-Id: I11ff9ea264b66446a8a5f0b92f98cf5b1b275e30
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Vernon Mauery (1):
Add boost_coroutine to the link list
(From meta-phosphor rev: 3dffb6689915365a415ee222ce576384d5bc30d1)
Change-Id: I49f13c09198af7b0eb7a463de7ff84b9421bcb23
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|