Age | Commit message (Collapse) | Author | Files | Lines |
|
INVENTECBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-inventec rev: 87316ecf8bbbf9471b961ec3b0185888f983237e)
Change-Id: I1f8f24a1eac6966419f9424216ee2a24fc940f6b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-quanta rev: 9bcdc320a7d1f049ea703de4dbecbc8013bfa2e5)
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Change-Id: Id6d2d050d43fc0fa0b90497a91be22e008e7f7b3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chia-Wei, Wang (3):
ast2600: add CA7 cache and SRAM parity check
ast2600: revise the boot initialization flow
wdt: aspeed: fix compile warning
Dylan Hung (7):
[update] revise memory reservation
[debug] apply DDR4 100M setting
[update] add config for DDR-400
[update] slower HPLL
[update] adjust cpu timer according to the HPLL
[update] fine tune DDR-PHY param
[fix] fix DDR-PHY training hangup
ryan_chen (6):
update pcie driver
add pcie rc pinctrl
add two pcie rc
add support two
add default pcie at ast2600-evb dts
update ast2600 fmc interrupt #no
(From meta-aspeed rev: 7daf7145abdd5499da5ebb25f4f214712b596562)
Change-Id: I0cf2c21a605683472f9dcdc4516d7c4f5d7858e5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
INSPURBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-inspur rev: 052786ad38fa172500a9f641ed26e95e25e6fbc6)
Change-Id: I5394fc045042a30bdc958a6e528d9a7f947d49b9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The tacoma card is a boxelder replacement (witherspoon bmc card) with an
ast2600 on it.
By default use core-image-minimal as the initramfs. To add the full
OpenBMC userspace set INITRAMFS_IMAGE="obmc-phosphor-image" in local.conf.
Build instructions:
TEMPLATECONF=meta-ibm/meta-witherspoon/conf . oe-init-build-env
MACHINE=witherspoon-tacoma DISTRO=openbmc-openpower bitbake aspeed-image-norootfs
(From meta-ibm rev: 77e917a89fd591bdc614aab362138f563460a316)
Change-Id: I75374dbb3a01a66b2c70d96e56587a818262ebf8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
EVBBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-evb rev: 1da7522494e80d2355c240e0eb05ae7576ee32cf)
Change-Id: Ie2f441c1f53bf367bea7cb4fb4da51c7e5602d97
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
QUANTABASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-quanta rev: 170929b6044497d12e65a6a2c5e7025262c9d783)
Change-Id: I12defd008e095db3227e5cd39261f942abd1406c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Johnathan Mantey (1):
Redfish: Make NIC HW reflect PATCH changes
(From meta-phosphor rev: c4568ad91bcb62d75456f2623e649f1bbb114724)
Change-Id: Ic0717f877d5ecb28e26b70f128fe67832a977823
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
conf: add ignoreDbusMinMax option
(From meta-phosphor rev: 8edc4aaee35251d0e7db77f393bd6da958b52a44)
Change-Id: Iaf69cd5f26ae628011ccfe794b5e667a3cb03737
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Change yield from ptr to object
(From meta-phosphor rev: b14e7647e53bd96e83c09928b8f805852217952e)
Change-Id: I9916c3f68ba93c6a1399385adc8185ecc17e1089
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently SOL over SSH is enabled for all the users.
Restricting the same to admin privilege user only (priv-admin)
for security reasons, without which any user will be
able to establish the connection
Tested:
1. Verified by establishing ssh -p 2200 on priv-admin user
and authentication works as expected
2. verified that non-admin users authentication fails as
expected
(From meta-phosphor rev: 9fe68f9906a99c38758ca9ddaa72432b17841af2)
Change-Id: I7cd4a1a0c6ac85c2df277006192ee2cf6616edd8
Signed-off-by: Richard Marian Thomaiyar <richard.marian.thomaiyar@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Kun Yi (1):
Rework envMock
(From meta-phosphor rev: e6396e657f9d895fce9ae5f45915c9d39118db15)
Change-Id: Ib9a8317a6c5e5369a4771ffbb16e917916b7d723
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (1):
Speed up the boot time of PSU Sensors
Peter Lundgren (1):
Support Nuvoton pmw/tach fans
(From meta-phosphor rev: 74389f148d44869bb9c21f6cbc1c98ae0d442a7b)
Change-Id: Ib63d23d66a7503df820c51030b7631580b36ff24
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (2):
Fix Fan Speed 2 not working issue part 2.
Add Power Unit Redundant Count
(From meta-phosphor rev: a96c1a21fd396b179f8a9075f76f9a7a7ccd0e99)
Change-Id: Id214c0366b8145af7b5364c0f254a3fbe85013d9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jacob Kroon (2):
bitbake: bitbake-user-manual: Correct description for _append/_prepend/_remove
bitbake: bitbake-user-manual: key-expansion: Don't refer to overrides
Nathan Rossi (2):
oeqa/selftest/context.py: For -t/-T use append argparse action
chrpath.bbclass: Add break_hardlinks kwarg to allow breaking hardlinks
Trevor Gamblin (1):
libevent: don't treat test stats line as pass/fail in ptest
Change-Id: I453a18f9177b070de9a2109a8b2b96694aa6e1c3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Timm Eversmeyer (1):
raspberrypi-linux: removed protocoll setting from SRC_URI
Change-Id: I9437bcd65234486bd934af123aa483d5a3dac260
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Armin Kuster (8):
libtpm: update to 0.7.0
swtpm: update to 0.2.0
tpm2-abrmd: update to 2.2.0
tpm2-tss: update to 2.3.0
tpm2-tss-engine: update to 1.0.1
tpm2-totp: update to 0.1.2
tpm2-tcti-uefi: update to tip
tpm2-pkcs11: update to tip
Change-Id: If24aa89766a3c49d34bca6f104d9310d05d72181
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (3):
python3-cmd2: Remove PNBLACKLIST
php: Remove no longer needed CFLAGS_append_aarch64
php: Move more into php.inc after php5 removal
Alistair Francis (4):
python3-requests-future: Initial commit of 0.9.5
python3-xmlrunner: Initial commit of 1.7.7
python3-fasteners: Initial commit of 0.15
python3-python-vlc: Initial commit of 3.0.7110
Anuj Mittal (3):
python3-defusedxml: add recipe
python-networkx: upgrade 2.1 -> 2.2
python3-networkx: add recipe
Khem Raj (9):
php: Turn PCRE JIT off for riscv
redis: Fix build with clang/x86
android-tools: Recognise i686 for HOST_ARCH
netdata: Update to 1.17.0 and fix build with clang/x86
safec: Define _GNU_SOURCE
safec: Upgrade to 3.5 release
openocd: Add --disable-werror always
breakpad: Update dont-clobber-rsp patch to latest
gparted: add to deps instead of overwriting
Martin Jansa (3):
remmina: add distro_features_check for GTK3DISTROFEATURES
ceres-solver: fix the paths in .cmake files
ceres-solver: add PACKAGECONFIG for suitesparse and lapack
Naveen Saini (1):
pm-graph: upgrade 5.3 -> 5.5
Oleksandr Kravchuk (1):
analyze-suspend: update to 5.5
Peter Kjellerstedt (1):
lvm2/libdevmapper: Make it build for native
Randy MacLeod (1):
poppler: update from 0.79.0 to 0.80.0
Slater, Joseph (1):
openhpi: control snmp-bc ptest generation
Stefan Agner (1):
fuse3: add libfuse3 recipe
Trevor Gamblin (1):
gvfs: upgrade 1.40.2 -> 1.41.2 for CVE fixes
Yi Zhao (2):
php: fix module path in mod_php.conf
apache-websocket: fix module path
Yuan Chao (2):
python-atomicwrites: new recipe
python-pytest: fix runtime error
Zang Ruochen (1):
python-certifi: upgrade 2019.6.16 -> 2019.9.11
Change-Id: Iba065b25686a1ac22d647226d9ea0c61c5b4578f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Not querying password for invalid user name is security
issue and can be used to determine valid / invalid user names
in the system. Always proceed to password acceptance screen
for invalid user login attempt too. This commit configures
pam_tally2 to ignore unknown user and proceed to do password
check.
Tested:
Verified the same in bmc serial console login with invalid user
name and password was requested, before displaying login incorrect.
Note: dropbear handles this already and hence ssh will not exhibit
this behavior.
(From meta-phosphor rev: 356ec08b989c84d1d034c3ff283a6909658d9435)
Change-Id: I72483d26ad7b7c39068ac33b7387adf2b10a1a27
Signed-off-by: Richard Marian Thomaiyar <richard.marian.thomaiyar@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-openpower rev: 94da1d8dee685dbfb062f457597265289d369295)
Change-Id: I0df0ad8b66d8dfc7774bf3af73a08eed26a6d497
Signed-off-by: Alvin Wang <alvinwang@msn.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Now the mihawk fan event will build error on openbmc master.
So I made some changes in order to solve the problem.
Tested: Verify fan control functionality of mihawk image
(From meta-ibm rev: 3e3ec10428cabe6917ea982159565024fcd21f9b)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I84aa7e8fd85dba15a5a84bbf7944bb286e5ba9ae
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Manojkiran Eda (2):
Adding Invalid Argument Error for Nameservers property
Network: Modify Nameservers Property to include NotAllowed Error
(From meta-phosphor rev: 1934adfce56091b78b33b04666543f6b5d973b59)
Change-Id: I868f4a61396b04c2431ccd8b5f453df348a2f544
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Creating and Registering service files with additional
text data to uniquely identify IBM BMCs in a network.
(From meta-ibm rev: 2c2b286604e82f89edd973bc15aee78ecf4b9a7f)
Change-Id: I3b843684f5df6a9b2cbe8a3709ee1203fb44ce42
Signed-off-by: asmithakarun <asmithkr@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add mihawk's ipmi sensor and fru yaml.
Tested: Use ipmi command to get the sensor list and fru data.
(From meta-ibm rev: 05c9a2734de75271837313f0e1794c58df50e990)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: Ic85af9b0cc1b44a3377fa919e63ab04dbff7a31c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
PEL: Change IDs from int32 to uint32
(From meta-openpower rev: f0cce10b5730eabd3cb3c829c3da0906476e5194)
Change-Id: I2bb6fcdd7939f752dad7267370747cf924d04c65
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The change that removed entity.yaml from the autogeneration method
also broke using devtool modify. Devtool fails to copy entity.yaml to
its destination directory because it can't be found in the Yocto
source directories.
(From meta-phosphor rev: 514e404cbfb9c0a8260d4dd157fecd0f2cefc438)
Change-Id: Ida9ba7af1e89f77d9e8171de214d7951612f01f4
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Dixsie Wolmers (1):
Fix filter bar clear filter button
(From meta-phosphor rev: d2839464ecfc7907b46a7abc40e60697075826fc)
Change-Id: I9fdf6708b3e87b065a5b1330c840e7f21037a8d1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (1):
Fix Fan Speed 2 not working issue.
(From meta-phosphor rev: e3a52c204f06dbb95728bcd847138232a6f6fa44)
Change-Id: If51c495cb496449cc32736c6f11d137c23227fb4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
John Wang (1):
Update .gitignore
(From meta-phosphor rev: 717f0fabd11c6cf718475e2c0d927637a5baee72)
Change-Id: I67aaa7191c16bae55524b68581e9fb9c09567536
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Aspeed u-boot tree has the g6 environment at 640KiB. Move to 512KiB
for easy OpenBMC compatibility.
(From meta-aspeed rev: 5b6780e9810f79b352db7ae8c6a352d978ef2cd3)
Change-Id: I65a8c799eb1db8756516a4f46098c75ee18751d1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Linus Walleij (1):
gpio: aspeed: Pass irqchip when adding gpiochip
Rashmica Gupta (6):
gpio/aspeed: Fix incorrect number of banks
dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers
gpio/aspeed: Setup irqchip dynamically
gpio/aspeed: Use ngpio property from device tree if available
gpio: Add in ast2600 details to Aspeed driver
ARM: dts: aspeed-g6: Add gpio devices
(From meta-aspeed rev: 3b101c7f2c10b43576e2770bc2eceb860d0f5660)
Change-Id: I56b71ef33fc6c941fedc8823cd1c9a3ea135e82c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Dixsie Wolmers (2):
Fix IE11 SNMP edit bug
Update SNMP page layout
(From meta-phosphor rev: b210a0c6cecd6e51bf9bb12c42f0989853b7986b)
Change-Id: I48c7f5c589d2f2cd73a8e5f25cedc54405ffeecf
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Deepak Kumar Sahu (1):
Watchdog: move get and set watchdog to new api.
(From meta-phosphor rev: 7215eded891fdcf3f4a4a8dd9faa4f9618fe0a70)
Change-Id: I445e6e142873fb6abd59f8a10801ba7e506e1c8e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (1):
Add PSU Deassert Event
(From meta-phosphor rev: 5b43df042dce239f5bf7a076b6dc48284d8d4e26)
Change-Id: I5e482c68d539b8e27ea80bf10acccd01e6388177
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (2):
PEL: Get BCD time from epoch milliseconds
PEL: Add a flatten() to Section base class
(From meta-phosphor rev: b49b50fd9e97b96c88ed2c7f2bb2761487067a84)
Change-Id: Ib7f7391d63839fef5afb2ecff31c1ee046060dc9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
A typo in the UBOOT_LOADADDRESS line for g6 prevented the FIT image from
properly be loaded by U-Boot. This change makes sure that the FIT image
is properly generated so U-Boot can load it to the right address.
Tested: Build, inspected, and booted the FIT image.
(From meta-aspeed rev: 12cd1d2b96db78ca4a34751c92d63cb6212228be)
Change-Id: Idad7ff047c29699a7cfb80c186e418183ca126f3
Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Witherspoon has only one LAN interface which is channel number 1.
The json file provided by the phosphor layer has channel information
for two LAN interfaces. The phosphor layer config file is modified to
mark the channel number 2 as reserved.
(From meta-ibm rev: 48dc78b5e8b6deba59e4aa200b8d88f10e277b69)
Change-Id: I4af0b7e682d2ec266831c7053926d1515f62c726
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.12, 5.2.13 and 5.2.14
stable releases.
(From meta-aspeed rev: 00d55503b465963ef43b7a52dc05c93ce1cec078)
Change-Id: I03164c88f5fe1da9c4ea2bc0b12a3245f74cdab0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
miramurali23 (1):
Fix missing expiring/expired icons and warnning messages in certificate table
(From meta-phosphor rev: 722f1f63c70918343f3a69c0c5e610568e0d29e6)
Change-Id: Iddf9d7d5c734790a12e2c337d41d2a2422828a25
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable this config for mihawk so the fan sensors are working, otherwise
hwmon will fail and exit when fans are not working.
Tested: Verify that the fan_tach sensors return -ETIMEOUT when host is
powered off and do not exit with failure.
(From meta-ibm rev: 2e39633c12f7914b1a4a398bbff9b467930bb731)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I0a7e881de5d5baa8d4db3cac9ca3cb46ec08faf4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Since mihawk has share and dedicated two ports, so use two mac addresses.
Tested:Use ip a command to see two mac addresses
(From meta-ibm rev: ed92ee6fa8847511fbf2049e02ef3f8f0d7a7c70)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I43b3b78f7efd7e339e91bdc356283f6b9ffe1a5c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.9, 5.2.10 and 5.2.11
stable releases.
(From meta-nuvoton rev: 5f41582d83b45bdbf5159aa3489effa0ff6f1ff7)
Change-Id: Ibcc44b652a14b5518c475947c8c7af1a4329cff9
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (18):
help2man: Upgrade 1.47.10 -> 1.47.11
glib-networking: Upgrade 2.60.2 -> 2.60.3
flac: Upgrade 1.3.2 -> 1.3.3
subversion: Upgrade 1.12.0 -> 1.12.2
world-broken.inc: Remove
meta/recipes.txt: Stop documenting the long removed recipes-lsb4
python: Remove PYTHONLSBOPTS that hasn't been set for some time
systemd: Print a buildtime warning about the status with musl
linux-dtb.inc: Remove
systemd: Update to the latest 242 branch
Remove LSB support
Remove LSB support bits
libxcrypt: Fix the build with -Os
systemd: Update to the latest 242 branch
Remove leftovers from the eglinfo removal
Update to KERNEL_DEVICETREE variable.
ref-manual: Remove documentation for the removed bluez5 distro feature
ref-manual: Remove documentation for the removed gnome class
Alex Kiernan (1):
iputils: Set prefix correctly for usrmerge
Alexander Kanavin (23):
python3-numpy: update to 1.17.0
images: use 512M of RAM in qemu if 'opengl" is in DISTRO_FEATURES
boost: update to 1.71.0
beaglebone: use the default of 256M rather than 512M
rpm: resolve a host contamination issue for mono packaging
qemu: set default RAM to 256M for all machines
mesa: disable gallium swrast driver on x86 x32
ltp: move from python 2.x to python 3.x
lsb-release: fix upstream version check
libffi: fix upstream version check
qemu: switch to '-vga std' emulated hardware from vmware/cirrus for x86/mips
ca-certificates: use python 3 for builds
libpsl: use python 3 during builds
pseudo: use python 3 during builds
llvm: use python 3 during builds
virglrenderer: update 0.7.0 -> 0.8.0
webkitgtk: use Python 3 for builds
webkitgtk: update 2.24.3 -> 2.24.4
default-providers.inc: set mesa as the provider for native(sdk) virtual/libgl
libepoxy: enable x11 PACKAGECONFIG for native/nativesdk
eglinfo: remove the recipe
local.conf.sample: add a commented-out option to enable the gtk UI qemu frontend
package.bbclass: allow shell-style wildcards in PRIVATE_LIBS
Alistair Francis (2):
linux-yocto-dev: Mark qemuriscv64 as compatible
qemuriscv: Generate a wic rootFS with a larger filesystem
Andre McCurdy (11):
bitbake.conf: drop FETCHCMD, GITDIR, etc fetcher over-rides
tune-arm1136jf-s.inc: add hardfloat support
tune-arm1176jz-s.inc: add support for arm1176jz-s CPU specific tuning
tune-ep9312.inc: fix TUNEVALID description
packagegroup-core-boot: drop duplicate MACHINE_ESSENTIAL_EXTRA_RDEPENDS, etc
rootfs-postcommands.bbclass: add inittab tweak to read_only_rootfs_hook()
base-files: nsswitch.conf is glibc specific
sqlite3: make CFLAGS consistent across native, nativesdk and target cases
sqlite3: explicitly set target endian-ness
feature-arm-thumb.inc: fix ARM_THUMB_SUFFIX
dropbear: don't create invalid symlinks if ssh, scp, etc are disabled
Anuj Mittal (1):
libjpeg-turbo: upgrade 2.0.2 -> 2.0.3
Armin Kuster (4):
bitbake: tests/fetch: Resolve fetch error in bitbake-selftest
gcc-9.2: Security fix for CVE-2019-14250
gcc-8.3: Security fix for CVE-2019-14250
gcc-8.3: remove 8.3 from zeus
Bruce Ashfield (11):
bluez5: fix build against libc-headers 5.2+
kernel-devsrc: remove python2 dependency
perf: change dependencies on python to python3
perf: v5.3+ build fixes
devsrc: update arm64 scripts/prepare for kernels 5.3+
linux-libc-headers: update to v5.2 headers
linux-yocto: introduce 5.2 recipes
qemu: bump linux-yocto preferred version to 5.2
linux-yocto/5.2: update qemuriscv64 SRCREV
linux-yocto/5.2: config tweaks and kallsyms fix
linux-yocto: drop 5.0 recipes
Changhyeok Bae (1):
iputils: upgrade to s20190709
Changqing Li (8):
libedit: fix failed to get history
avahi-ui: support usrmerge
bootchart2: support usrmerge
systemd-bootchart: support usrmerge
bootchart2: switch to add patch from change source in do_install
mdadm: skip timeout testcase 11spare-migration
dnf.py: installroot support usrmerge
man-db: support usrmerge
Chen Qi (7):
bbtests.py: remove recipe-depends.dot
commands.py: fix typo
bitbake: cooker.py: remove generation of recipe-depends.dot
bind: fix build with python3 PACKAGECONFIG enabled
python-testtools: rdepend on doctest module
python-numpy: rdepend on multiprocessing module
python3: make misc package rdepend on pydoc and pickle modules
Christophe PRIOUZEAU (1):
common-licenses: update BSD-2-CLAUSE license text
Dan Callaghan (1):
autotools: always include config_site.d files in CONFIG_SITE
Daniel Klauer (1):
image.bbclass: Fix debug output for rootfs size
Denys Zagorui (1):
gzip: add nativesdk support
Drew Moseley (1):
runqemu: Fix typo in help text.
He Zhe (4):
ltp: cve/meltdown.c: Fix kernel symbol finding
ltp: syscalls: rt_sigwaitinfo01: Fix failure for MIPS arches
qemu: Add pkg-config handling for libgcrypt
qemu: Fix dependency of PACKAGECONFIG libcurl
Jacob Kroon (2):
btrfs-tools: Add PACKAGECONFIG knob for controlling python support
rm_work: Remove redundant 'after' in addtask statement
Jason Wessel (2):
serial-getty@.service: Allow device to fast fail if it does not exist
Revert "kernel.bbclass: adjust a condition checking"
Joshua Watt (9):
bitbake: bitbake: respect force flag in runall and runonly
oeqa: reproducible: Cleanup reproducible build
oeqa: reproducible: Use subTest for packages
oeqa: Set LD_LIBRARY_PATH when executing native commands
oeqa: reproducible: Record packages in test results
oeqa: Enable reproducible build test
oeqa: reproducible: Do two clean builds
oeqa: reproducible: Preserve sstate mirror for first build
resulttool: Add reproducible log extraction
Kai Kang (4):
avahi: launch avahi-daemon after connman
cups: redefine CUPS_SERVERBIN
texinfo: fix multilib file confliction
sysstat: 12.1.3 -> 12.1.6
Kevin Hao (1):
meta-yocto-bsp: Bump to the v5.2 kernel
Khem Raj (12):
go-1.12: update to 1.12.9 minor release
powerpc-tunes: Introduce bigendian tune
tune-riscv: Drop littleendian and introduce bigendian tune
gcc: Move STANDARD_STARTFILE_PREFIX_1 and STANDARD_STARTFILE_PREFIX_2 back to gcc.c
gcc: Fix ldbl-128 support for musl
libgpg-error: Fix build with gawk 5.x
libgpg-error: Fix build with gawk 5.x
musl: Update to latest master
gcc-9.2: Fix risc-v dynamic linker relocation
python3native, pythonnative: export PYTHON_LIBRARY and PYTHON_INCLUDE_DIR
oeqa: Recognise svlogd as another logger
python3-manifest.json: Fix typo in summary
Mark Asselstine (1):
sdkext: use simpler kernel module for devtool test
Mark Hatle (1):
yocto-check-layer: Allow any case for README file detection
Martin Hundebøll (1):
initscripts: remove warnings on read-only-rootfs (again)
Martin Jansa (3):
bitbake: utils: Fix movefile() exception handling with python3
bitbake: fetch2: show warning when renaming the archive with bad checksum failed
bitbake: bitbake-user-manual: Improve the example for Removal (Override Style Syntax)
Mazliana (1):
oeqa/kerneldevelopment: Able to apply a single patch to the Linux kernel source
Ming Liu (1):
weston: uprev to 7.0.0
Nathan Rossi (30):
binutils: Fix mips patch which changes default emulation
oeqa/utils/nfs: Add unfs_server function to setup a userspace NFS server
scripts/lib/resulttool/report.py: Add more result types
gcc-common.inc: Process staging fixme with correct target/native sysroot
oeqa/core/tests: Skip test_fail_duplicated_module
oeqa/core/tests: Fix test_data module tests
Clean up remnants of glibc-initial
oe-selftest: Implement console 'keepalive' output
dejagnu: Add dejagnu for binutils/gcc test suites
binutils-cross-testsuite: Create recipe for test suite execution
gcc-runtime: Add do_check task for executing gcc test suites
glibc-testsuite: Create a recipe to implement glibc test suite
gcc-testsuite.inc: Fix ssh.exp, ensure multilib_flags are populated
security_flags.inc: Add overrides for glibc-testsuite to match glibc
archiver.bbclass: Do not archive srpm's if there are no package tasks
oeqa/core: Implement proper extra result collection and serialization
oeqa/core: Rework OETestTag and remove unused OETestFilter
oeqa/selftest: Add test run filtering based on test tags
oeqa/core/runner.py: Fix OETestTag listing
oeqa/selftest/binutils: Create selftest case for binutils test suite
oeqa/selftest/gcc: Create selftest case for gcc test suite
oeqa/selftest/glibc: Create selftest case for glibc test suite
oeqa/selftest/cases/glibc.py: Don't install python3 and pexpect
oeqa/selftest: For toolchain tests do not fail if a test failed
oeqa/selftest: Toolchain tests suffix "-user" for qemu usermode results
oeqa/selftest: Use extraresults on self instead of self.tc
oeqa/selftest/context.py: Change -t/-T args to be optional
oeqa/core/decorator: Fix super class modifying subclass tags
oeqa/selftest/cases/gcc.py: Split into classes for parallelism
oeqa/selftest/cases/glibc.py: Rework and tag with toolchain-user/system
Neil Armstrong (1):
mesa: Add support for the panfrost PACKAGECONFIG
Oleksandr Kravchuk (8):
libsolv: update to 0.7.6
libevdev: update to 1.8.0
ell: update to 0.22
go-dep: update to 0.5.4
libsecret: 0.19.0
python3-pbr: update to 5.4.3
python3-git: update to 3.0.2
libxcrypt: update to 4.4.8
Peiran Hong (1):
diffutils: Added perl to support ptest & Skipped one test case
Peter Kjellerstedt (2):
libffi: Make it build for MIPS o32
devtool: Avoid failure for recipes with S == WORKDIR and no local files
Richard Purdie (11):
poky-altcfg: Replace poky-lsb with poky-altcfg
ca-certificates: Fix reproducibilty and multilib issue
gcc-cross: Clean up fixed-includes
systemtap: Use latest and greatest git version for 5.2 kernel support
gcc-cross: Fix header file corruption problems
poky: Use 5.2 kernel by default
binutils/glibc-testsuite: inherit nopackages to fix world builds
systemtap: Drop patches merged upstream
poky-tiny/poky-altcfg: Use busybox-mdev and systemd
oeqa/selftest: Markup 'machine' specific test cases
oeqa/selftest: Tweak binutils tests tags as toolchain/user and system
Robert Yang (3):
ccache: 3.7.1 -> 3.7.3
nfs-utils: 2.3.3 -> 2.4.1
build-compare: 2015.02.10 -> 2019.08.14
Ross Burton (11):
libedit: remove FETCHCMD append
libnl: upgrade to 3.5.0
libnl: don't patch libnl-3.0.pc
systemd: explicitly set the path to nologin
core-image-sato: don't use 512MB in qemumips
patch: add CVE tags to patches
pango: 1.44.6 upgrade
pango: add PACKAGECONFIG for libthai support
harfbuzz: upgrade to 2.6.1
systemd: ensure reproducible builds by clearly exposing the time epoch support
ref-system-requirements: add Debian 10 to supported distribution list
Scott Rifenbark (5):
ref-manual: Updated the "AS" variable
ref-manual: Updates to "Building Your Recipe"
dev-manual: Updated "Creating a Team Development Environment"
poky-end: Added "pylint3" package to Ubuntu essentials.
ref-manual: sync list of image types with source
Tim Blechmann (1):
icecc: blacklist systemtap
Trevor Gamblin (2):
lighttpd: drop hard-coded lua version in PACKAGECONFIG
libevent: add granularity to ptest log
Vijai Kumar K (1):
lib/oe/gpg_sign.py: Remove unwanted import
Wes Lindauer (1):
bitbake: bitbake: cooker: Ensure bbappends are found in stable order
Yi Zhao (1):
libbsd: upgrade 0.9.1 -> 0.10.0
Yuan Chao (1):
man-db: upgrade 2.8.6.1 -> 2.8.7
Zang Ruochen (7):
libarchive:upgrade 3.3.3 -> 3.4.0
python3-pip:upgrade 19.2.2 -> 19.2.3
logrotate:upgrade 3.15.0 -> 3.15.1
libogg:upgrade 1.3.3 -> 1.3.4
dtc:upgrade 1.5.0 -> 1.5.1
python3-dbus:upgrade 1.2.8 -> 1.2.10
meson:upgrade 0.51.1 -> 0.51.2
Change-Id: I341e8df65e8196114088a2d6d6eb3a33296188b4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This makes it clear in the docs that ENABLE_UART can be used both for the RPi 0W or 3.
(From meta-raspberrypi rev: 34dab90dfc1b518cd9235e2fbb8e0e9ee0ecd263)
Change-Id: I439a21675ac5c004fe00ec4cb2bc25f59f234121
Signed-off-by: Bernardo A. Rodrigues <bernardaraujor@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adrian Bunk (1):
librcf: Remove, PNBLACKLIST since April 2018
Khem Raj (3):
openocd: disable werror when building with gcc
kernel-selftest: Needs error.h which is missing in musl
remmina: Add space before append operation
Zheng Ruoqin (2):
python-prettytable: Add python3 version
python3-colorama: New recipe
aehs29@gmail.com (1):
remmina: Fix spice protocol dependency and configuration
Change-Id: Ia4674cf3ab186b06c25f0601e02ddc00c96b781f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
build: drop flto option to workaround gcc issue
(From meta-phosphor rev: ba09914d641f3f740bc5c79f1469cd4bf190fea4)
Change-Id: I9e1ec3d4d30b5f96c4b24f38a55e8ca916cecae6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
Add an error handling logic of stod
(From meta-phosphor rev: 593e8759b33fdefa87ca6f0c4869859fec4e10ec)
Change-Id: I2a3af6cc04cc7e387ea551c2b8a3577f20a03a2d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alejandro Enedino Hernandez Samaniego (2):
qemu-xilinx: split recipes for native (system, usermode) and target
README.building: Update building instructions for multiconfig builds
Manjukumar Matha (2):
machine-xilinx-default.inc: Deploy u-boot.elf for Versal devices
meta-xilinx-contrib: Fix drm patch for v4.19 kernel
Change-Id: I1bc00353e9fb0ce4035ef42aa100ab2162093608
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrei Gherzan (1):
linux-raspberrypi: Update 4.19 recipe to 4.19.71
Khem Raj (2):
layer.conf: Add zeus to compatible layers
eglinfo: Drop bbappend
Martin Jansa (1):
u-boot-fw-utils: apply the same rpi4 patches as for u-boot recipe
Change-Id: I96685a22f825681c6739af38f44c0bda4eaacd1d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Armin Kuster (11):
python-scapy: drop py2 package
packagegroup-core-security-ptest: only included if ptest is enabled
packagegroup-core-security: update package name
busybox: fix sig changes when layer added
initramfs-framework-ima: correct IMA_POLICY name
apparmor: drop lsb RDEPENDS
openscap: Drop nostamp
scap-security-guide: add depends on openscap-native do_install
cryptsetup-tpm-incubator: fix QA error RDEPENDS
oe-scap: Fix QA RDEPENDS error
suricata: update to 4.1.4
Stefan Agner (1):
libseccomp: build static library always
Change-Id: Ia2f8aec978de4f3d20c13be3c12b70a7badc29d5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|