summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-13meta-ibm: romulus: new YAML config recipeBrad Bishop6-0/+4641
YAML configuration files exist scattered throughout the OpenBMC tree and how they are used is controlled with layers dependencies of virtuals and preferred providers. Most of the time the above scheme is very difficult to comprehend. This patch continues a re-thinking of that approach towards a more centralized scheme. Specifically this patch implements a single YAML config recipe for the Romulus systems. The logic contained in the recipe was pulled from all over the OpenBMC tree - the ability to comprehend how the different YAML files are generated and consumed should be greatly eased. One notable detail - unlike the upstream recipes, romulus-yaml-config is a target recipe and as such enables MACHINE based overrides. YAML files were copied from different locations in the tree, and run through a styling application (pyyaml dump(load(yaml))): romulus-ipmi-fru-properties-native:extra-properties.yaml -> romulus-yaml-config:romulus-ipmi-fru-properties.yaml romulus-ipmi-fru-read-inventory-native:config.yaml -> romulus-yaml-config:romulus-ipmi-fru.yaml romulus-ipmi-fru-read-bmc-inventory-native:bmc-fru-config.yaml -> romulus-yaml-config:romulus-ipmi-fru-properties.yaml romulus-ipmi-inventory-sel-native:sel-config.yaml -> romulus-yaml-config:romulus-ipmi-inventory-sensors.yaml romulus-ipmi-sensor-inventory-native:config.yaml -> romulus-yaml-config:romulus-ipmi-sensors.yaml (From meta-ibm rev: 67b17f7aa658b71908de47aa0b0814530da36259) Change-Id: I3953274db23f9ccf8cb74d3962e797bf935d61a8 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13meta-evb-nuvoton: evb-npcm750: add warrior compatibilitykwliu2-2/+2
Set compatibility to thud and warrior. (From meta-evb rev: 4d85a858915070372700be7905c397379030d595) Signed-off-by: kwliu <kwliu@nuvoton.com> Change-Id: I5de64963f205ffd5f9e56937f2fccab6cced1138 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13meta-phosphor: ipmid: remove POWER_READING_SENSORBrad Bishop1-1/+0
/usr/share/ipmi-providers/power_reading.json is the ipmid default anyway, so there isn't any point in setting it explicitly. (From meta-phosphor rev: 0f6fbb63bb52af49d0075838417c4184e065aae8) Change-Id: I7d3696255e71c7c2ee2b2f33efb77dda6b0b5a87 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13meta-phosphor: ipmi: fru: remove unused dependencyBrad Bishop1-8/+0
Remove the ipmi-fru-hostfw dependency from phosphor-ipmi-fru. It isn't used. Remove the todo that refers to the dependency. The TODO suggests some refactoring but it probably doesn't make sense to push the hostfw abstraction all the way out to the IPMI FRU parser - this is already being accomplished elsewhere with simpler schemes than the one suggested. (From meta-phosphor rev: 02826baeea9bb63317e4ebeff67b7f4db029c19c) Change-Id: Ia5223be36908307179852e767f58732e7e8bf11b Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13include bmcweb-cert-config the same as bmcwebEd Tanous2-3/+1
bmcweb Redfish certificate service in this review: https://gerrit.openbmc-project.xyz/c/openbmc/bmcweb/+/18545 Will require phosphor-bmcweb-cert-config to function correctly. Move the location that this is included to ensure that they are included together. Tested: built image with aformentioned patch. observed that GET /redfish/v1/Managers/bmc/NetworkProtocol/HTTPS/Certificates/1 no longer throws 500 errors on image types that are not exactly obmc-phosphor-image targets. (From meta-phosphor rev: 80c1e1a4a052f23e05d87d9dce0aa57d9627005e) Signed-off-by: Ed Tanous <ed.tanous@intel.com> Change-Id: I98cd1b07fb6b3050ac3c95609fbbcdc71943a7bd Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13linux-aspeed: Move to 5.1.9Joel Stanley1-2/+2
This includes security and bug fixes from the 5.1.8 and 5.1.9 stable releases. (From meta-aspeed rev: c774792b8c027409f945f030e286164e8d567f44) Change-Id: Ibb858660e66746122f0d59c237cc60e3fa87e5e4 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13linux-aspeed: Add PCA953X driver to defconfigJoel Stanley1-0/+2
This is used by the Swift system. (From meta-aspeed rev: 27b8161d02b6a37c4822a2f9eb26f94fcbe82dca) Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: I68ccf9a25befa874634cfbe076ab300801d2f70b Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13phosphor-debug-collector: srcrev bump fa180596fe..5ba7176ca2Andrew Geissler1-1/+1
Marri Devender Rao (1): Fix dreport os-release script point to a symbolic link (From meta-phosphor rev: 9e088796df3d7063c7e891c691c0a52cf684d6bb) Change-Id: I3724598a40bf84a873b13f2313f679f5d81b2658 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13phosphor-host-ipmid: srcrev bump 02650d5302..c419680b29Andrew Geissler1-1/+1
Richard Marian Thomaiyar (1): user_mgmt: Fix error message with file name (From meta-phosphor rev: c2e9ac97928e8a97646bb1d3fca9441afc6cac46) Change-Id: I06b4c259319454bc9e5a827c32632541977fa5ce Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-13bmcweb: srcrev bump 6ca6ac12e6..d22c8396f0Andrew Geissler1-1/+1
Jason M. Bills (1): Update supported ResetTypes and actions (From meta-phosphor rev: ab434039d188f9ac5a21f0fa96dbdbd7ed36666c) Change-Id: I948b4fb6beddcd493491490e76b2292743c90ad8 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11setup: Use config name instead layer nameAlexander Filippov1-16/+20
Allows user to pass a config name instead of a layer name. This can be extremely useful for layers, which contain several configs. E.g. to build firmware for swift you can call: ``` . setup swift bitbake obmc-phosphor-image ``` Change-Id: I397a53b0cc135f622e4b3dc712ff93f6a0c10b8a Signed-off-by: Alexander Filippov <a.filippov@yadro.com>
2019-06-11swift.conf: Build an ext4 imageAdriana Kobylak1-0/+2
Build an ext4 image for swift to be used in its eMMC chip. Tested: An ext4 image was built in addition to the current ubi ones. (From meta-ibm rev: 59bef037b63a73626434bfbfa22e1a53ca7133cd) Change-Id: I102b821754e2dd4998797f29bb935bd69324e8a3 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11swif: Add power supply sensorsMatthew Barth3-2/+48
Initially configure Swift's power supply sensors as they were on Witherspoon. Keep the config files separate between systems as they will be different due to differences between the power supplies used. Tested: Built Swift image that contained the config files Built Witherspoon image that still contained the config files (From meta-ibm rev: d8d27673f1b277db83859408842619ae24606235) Change-Id: I64d893c6c5dbea0e4d4a592042b17d6bad5b4596 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11swif: Add CP0/CP1 OCC sensorsMatthew Barth3-7/+809
Create Swift's OCC sensors initially using the same thresholds as they were on Witherspoon. Swift has 12 dimms/proc with 2 temp sensors per dimm. Also there are 2 GPUs/proc. Tested: Built image that contained the config files (From meta-ibm rev: 2bd366ab4bd4b9e085b70d46f07f5f1acdd35790) Change-Id: Ia381c561f283c4d542e0035534375fa14c493278 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11Add a recipe for hostboot-debug-tools.Lakshminarayana R. Kammath1-0/+21
This is a work in progress - at the moment this recipe doesn't do anything beyond ensuring the dependencies are installed. Tested : Verified. Perl executable and dependent libs available in debug tarball. (From meta-openpower rev: d252fd06a3bd282e4c80a6c961070acc2bfb3242) Signed-off-by: Lakshminarayana R. Kammath <lkammath@in.ibm.com> Change-Id: Iaee4127714bf9ccc5571bfea95d56f4d30add240 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11dbus-sensors: srcrev bump 86dea2b5fe..15266a96d7Andrew Geissler1-1/+1
Cheng C Yang (1): Correct association of PSU PWM Sensor (From meta-phosphor rev: 4fcfd1a32290cad390561e2659a877e8d58785b2) Change-Id: I95e4811c01ae682829cf4a9e8c415c816c08dfa6 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11phosphor-ipmi-host: Remove HostIpmi requirementWilliam A. Kennington III1-1/+0
We have systems that have no host present, but require the use of the network ipmi functionality. This requirement doesn't work for these systems since they don't have a host transfer mechanism. This doesn't change the ordering requirements of the services. (From meta-phosphor rev: 484aa1574f390c9a32ba3a31fb5518d94058d7d9) Change-Id: I455b7dad4aecda64b0bc05c0349b011e0e8885d3 Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11meta-phosphor: nuvoton-layer: generate full flash image.Oshri Alkoby (NTIL)1-0/+70
Nuvoton's full flash image includes also a bootloader called Bootblock, and headers for it and for the u-boot. Generating headers and merging the Bootblock and the u-boot are being done by Nuvoton's binary generator tool (Bingo), which uses external paramteres from XML files for that. (From meta-phosphor rev: 13cc41f61207bcf06a9daab552c66b05120aa379) Signed-off-by: Oshri Alkoby (NTIL) <oshri.alkoby@nuvoton.com> Change-Id: Ic95719e83d5a4c998b20d3ece70893ea34106a06 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11entity-manager: srcrev bump 3e5e41fb89..15c49902cfAndrew Geissler1-1/+1
James Feist (3): Update Variant Visitors Enhance device added / removed log message Add thresholds for Exit Air Temp Sensor (From meta-phosphor rev: b5b6c63135a09ac2927014a217cac01ea95fcd07) Change-Id: Ifea6a825cb8f0733c2c51d7f4c9cb5fc7b20676b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11bmcweb: srcrev bump 4d2849acfe..6ca6ac12e6Andrew Geissler1-1/+1
Johnathan Mantey (1): Redfish: Correct PATCH for IPv6 static addresses (From meta-phosphor rev: 4e9ecc031e0af0fbf57a322c3d5694248a032c90) Change-Id: Idca7a798b5e654cb905090e6d17d7403e2205029 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11phosphor-certificate-manager: srcrev bump f46827128c..dec5877c7eAndrew Geissler1-1/+1
Marri Devender Rao (1): Fix subject property value is set with certificate string (From meta-phosphor rev: a37d0de134fb4dcf01568fdcdb68ef035936d771) Change-Id: I4e77f1525ed738464c2a2139fb897474113ed7a5 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11dbus-sensors: srcrev bump 9f16b4bea8..86dea2b5feAndrew Geissler1-1/+1
Vijay Khemka (1): cpusensor: Add thresold offset (From meta-phosphor rev: ecca2828f5b7e415d36f93afb829fe1c31450c03) Change-Id: I314dbdcf89f3fd9fb1a7b3aa9e634ac3ece1f6a5 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11entity-manager: srcrev bump 99fa42789a..3e5e41fb89Andrew Geissler1-1/+1
Vijay Khemka (3): ADC Scale factor update for FBTP Add stepwise FSC configurations for FBTP Add DTS critical offset (From meta-phosphor rev: db2ff3cae90948b53fc49ca972af661e642bffb8) Change-Id: Ifb0b37c65a711fe9d844ab46668088c4f7e49bf7 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11fp5280g2: Enable host UART VGA outputJohn Wang1-1/+1
This allows the machine to have the host UART output rendered to a framebuffer and output on the BMC's graphics device up until the host loads it's PCIe VGA driver. Tested: Built and ran on a fp5280g2,saw that the host UART output displayed on the monitor. (From meta-inspur rev: 89bd7c2a383d1318ef885c50f9cc4ee5b2af1174) Signed-off-by: John Wang <wangzqbj@inspur.com> Change-Id: Ib7c37a750b508aee314e1b3360733fe8b3eef311 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11meta-ibm: romulus: drop channel.yamlBrad Bishop2-12/+0
These files aren't used by ipmid anymore, so drop. See host-ipmid change 41ac50530a for details. (From meta-ibm rev: dfd8a072958aa531a41d7fbb190675c66b75e15c) Change-Id: I3aaab61c24fa0a4167cb04b60e577c1761605887 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11dbus-sensors: srcrev bump 58b2b53e6f..9f16b4bea8Andrew Geissler1-1/+1
James Feist (4): cpusensor: detect if cpu is available adcsensor: Add CPU presence checking Follow up on Todo, move path out of base sensor Add Hysteresis support (From meta-phosphor rev: 04564d9a8e751c5dbf077dfa66b99461b04e0b34) Change-Id: Iede48bfc8984fa39d669f885ff58395e922c0171 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-11gpio-presence: Add extra-iface param to service execAnthony Wilson1-1/+1
With the addition of a new parameter in the phosphor-gpio-presence app, this addition to the service exec file ensures any additional interfaces specified in the appropriate config files are passed to said app. phosphor-gpio-presence: srcrev bump 64c8fcb651..206f004098 Anthony Wilson (1): gpio-presence: Support for multiple iface assocs (From meta-phosphor rev: da2632a84ad78b4b0ff97bd3648a4a165cccbcd7) Signed-off-by: Anthony Wilson <wilsonan@us.ibm.com> Change-Id: Ie5c1c970f4f90b12e46284dede4091862b8ca6f5 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-lenovo: hr630: Add sensor configsLisa Liu5-0/+92
temperature sensors inlet and outlet of tmp75, adc voltage sensors and fan-tach sensors. Tested: Build it in hr630 image, load on hr630 platform, make sure it could show these sensors correctly with command: ipmitool sdr list. (From meta-lenovo rev: 8cd1949d5b4c66682baf951bb8c060320032ad0b) Signed-off-by: Lisa Liu <liuyj19@lenovo.com> Change-Id: Idfd89ea40642130daddbb9e8c0384004c076638a Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-lenovo: hr630: Initial led yaml file equipped with hr630 platformLisa Liu2-0/+35
Add heartbeat and fault led in yaml file. (From meta-lenovo rev: 8a7b9b0a15f36b6ecbd47442b7095f9d43639e79) Signed-off-by: Lisa Liu <liuyj19@lenovo.com> Change-Id: I87418b92d988ba92dd4a4a33e1484d2e42fceca9 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-lenovo: hr630: add kernel configurationsLisa Liu2-0/+21
Add kernel configurations. Tested: Build Lenovo hr630 image and load on the target hardware, ensure that BMC boots to console. (From meta-lenovo rev: 5c27e5f9f7504fc9b9c9567f2ff0ca6d3a9e7eed) Signed-off-by: Lisa Liu <liuyj19@lenovo.com> Change-Id: I32d845b4990d7769e3ddc1b57301c778cfb265f6 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-lenovo: network: Disable link-local IP address auto configurationLisa Liu1-0/+6
Add --disable-link-local-autoconfiguration flag for auto-configure. Tested: Check IP address in debug console by ifconfig to see real IP address. (From meta-lenovo rev: f6ec76794761cf29d70c56788570400b7c16fcee) Signed-off-by: Lisa Liu <liuyj19@lenovo.com> Change-Id: I05a10baa1071cd6d93e0a2bcf317c95187bf7539 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-lenovo: hr630: Add hr630 platformLisa Liu6-0/+96
hr630 is a Lenovo platform. Add machine to repo. kernel device tree of Lenovo is being reviewed, so aspeed-bmc-lenovo-hr630.dts has not been merged yet. (From meta-lenovo rev: 460c31a424e0ee831933f61ecb55f60a0c9ba38f) Signed-off-by: Lisa Liu <liuyj19@lenovo.com> Change-Id: I1577775ea92fd8dbc9ab5b3f2b045ef04e524dc6 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10Swift: Swap power supply I2C bus addresses.Matt Spinler2-4/+4
The top supply, PS0, is 0x68, and PS1 is 0x69. (From meta-ibm rev: c4df414e0284f1859ff1c709eb84eace6d848e87) Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I4a9f38830f86b18932a918119bafaf1f5bd5d72a Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10Swift: Fix UCD90160 device pathMatt Spinler1-1/+1
More than 1 directory in the path is dependent on the I2C bus. (From meta-ibm rev: dc4b6022d75a5ed50588c71f1890f5cb7df0dcd4) Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: Iec2026ab941e735e684b939bca40482a7c603150 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10Swift: run avsbus-disable.sh through dos2unixMatt Spinler1-18/+18
It had the '^M' which which prevented the BMC from running it. (From meta-ibm rev: 06b094f1a87a61da756323ce5ea3e75d6f4c709f) Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I42dfc1a8d3af5c8f949003775b3076218de9035a Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10Swift: Run power-workarounds after PGOODMatt Spinler6-0/+41
On swift, the VRMs that power-workarounds.sh touches can't communicate until the system has been powered on. Rearrange the services to make this happen. (From meta-ibm rev: b5980e57561bc2f161bd61965551c1a3e1323131) Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I0ac7fb6adaa0de18feb525259f991e99c147e244 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-gsj: quanta-nvme-powerctrl: Update package processSamuel Jiang2-94/+66
Update quanata-nvme-powerctrl process and delete two duplication function and variable init_once.sh: 1. Dump input pin information because of confirming HW signal. 2. HW POWER_U2 default is output high. If detect SSD is plugged, don't need to initialize POWER_U2 again. 3. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then st RST_BMC_U2 high. nvme_powermanager.sh: 1. Add RST_BMC_U2 steps, check PWRGD_U2 is fine, wait 100ms then set RST_BMC_U2 high. 2. Independent package for power control delete nvme_main DBus property trigger and tranfer led trigger to nvem_main package. (From meta-quanta rev: e689ff4990c9d76bb54c89f37831d23ff31993d2) Change-Id: Idb1faff9f30785c5cc168adfe18173ea93e7a146 Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-gsj: quanta-nvme-powerctrl: add shared scriptSamuel Jiang2-1/+68
Add shared nvme_powerctrl_library script for mantain function It could be easy review steps with specification. (From meta-quanta rev: a9607d7703020f46598b28a4d1cea7be6997b47a) Change-Id: I7d7471005d253a3a0cca6bbcc083d0bfcf7efbc6 Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10dbussensors: add libgpiod dependsJames Feist1-1/+1
Upcoming changes are moving away from sysfs to gpio character device. This is needed to use the character device. Tested: review 22115 builds (From meta-phosphor rev: 4a5ee87f5b6f99e4fb88119f276d969faf20ccdb) Change-Id: I23ad69a84712d97c1d6c2e51b68ccac1b0d3747f Signed-off-by: James Feist <james.feist@linux.intel.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10libgpiod: Enable CXX HeadersJames Feist2-1/+2
Add CXX to packageconfig and change the devtools to RDEPEND on libgpiod-tools instead as they are the actual tools. Without changing it to the tools when we enable cxx the tools do not by default get installed by Yocto. Tested: gpioinfo still functioned properly on BMC, and was able to bitbake package using CXX headers for dbus-sensors. (From meta-phosphor rev: 76d4c46294c83ea0240a319b4e74c06b57dc51c1) Change-Id: I5143130bbfbe97f8af4818231d502f36f88fe4ae Signed-off-by: James Feist <james.feist@linux.intel.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10phosphor-gpio-monitor: srcrev bump 64c8fcb651..206f004098Andrew Geissler1-1/+1
Anthony Wilson (1): gpio-presence: Support for multiple iface assocs (From meta-phosphor rev: e5037692dcee84bcc2c52cbcd5d0df281b19887a) Change-Id: I8ffcbdbf04509729901dd4283cee8dc98a53cabf Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10linux-nuvoton: 5.1.7 stable update, NPCM EDAC driverJoel Stanley2-2/+6
Enable EDAC in the kernel configuration. George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver (From meta-nuvoton rev: 382bd93faee564833cce0670ec458d76db6dbde5) Change-Id: I1627b91fa4464063f15b7a49b54829809594b3d4 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10linux-nuvoton: 5.1.6 stable updates, Qanta GSJJoel Stanley1-2/+2
This adds the Quanta GSJ NPCM730-based BMC and updates to the latest 5.1 stable tree. Fran Hsu (4): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree. ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree Tomer Maimon (1): dts: npcm750: modify SPI partition label names (From meta-nuvoton rev: c1e7672e39ca3f347da7c50a3a2d277594b6e7a6) Change-Id: I91e0f19c36d6edda4717bd4346bee3f233712d5e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-nuvoton: generate full flash image.Oshri Alkoby (NTIL)6-0/+555
Nuvoton's full flash image includes also a bootloader called Bootblock, and headers for it and for the u-boot. Generating headers and merging the Bootblock and the u-boot are being done by Nuvoton's binary generator tool (Bingo), which uses external paramteres from XML files for that. (From meta-nuvoton rev: 07a65b5a1cd4576367697ae5400482517e53d2d7) Change-Id: Iad274d6e0b42b96d5500bdb709e450c0c978338a Signed-off-by: Oshri Alkoby (NTIL) <oshri.alkoby@nuvoton.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10linux-aspeed: Move to 5.1.7Joel Stanley1-2/+2
This includes security and bug fixes from the 5.1.7 stable release. (From meta-aspeed rev: 7106f127ea35b485066176178b06bcf8490f5ddb) Change-Id: I362b575dc184ac0d425c5b30fc3495fde53effae Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10meta-quanta: gsj :Override default settings of TimeOwner and TimeSyncMethod ↵Tony Lee2-0/+14
in gsj. - Set default TimeOwner to "Host" - Set default TimeSyncMethod to "Manual" (From meta-quanta rev: 5b11c82db0edf49711a8e81af12efb579b2c64fd) Signed-off-by: Tony Lee <tony.lee@quantatw.com> Change-Id: Id9ed58fd24d064f798d8e01b2239dfdc516c4d00 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10phosphor-host-ipmid: srcrev bump ea1c401c4b..02650d5302Andrew Geissler1-1/+1
Ayushi Smriti (1): User-mgmt: Add IPMI user pam authenticate check API (From meta-phosphor rev: b51a354c9227201cd31cb53cfb8de1c98eec0a56) Change-Id: I3363abd1fc4f8e62b5fa1f7849b1f52a328e128a Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10bmcweb: srcrev bump 32bee76c18..4d2849acfeAndrew Geissler1-1/+1
Jayanth Othayoth (1): Fix for Certificate Signature validation failure (From meta-phosphor rev: 088135f1019fb34e97bcd973a4db57c1b8180b0c) Change-Id: I138856628277d50f468dd84985a8d0118e794885 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10phosphor-user-manager: srcrev bump 59dba4435d..75b5a6fc4cAndrew Geissler1-1/+1
manojkiraneda (2): phosphor-ldap-conf: handle "InterfaceAdded" signal on the ca-cert object Change the nslcd configuration based on CertificateString Property (From meta-phosphor rev: 596611235eec0ad0de48ed42a8f37d53badffbcd) Change-Id: I7f257405f305a2f32f604b9216fdb1bc5da3ea25 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-06-10phosphor-hwmon: srcrev bump 5c014d2bb7..d0ce7925d7Andrew Geissler1-1/+1
Matthew Barth (1): Emit signal and remove sensors from dbus (From meta-phosphor rev: 0736b07dc9d34537ad0de6f397778df74a88e7a6) Change-Id: I530d52fda048f6ab63b18d05cc355080b746de88 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-13 21:36:55 +0300