Age | Commit message (Collapse) | Author | Files | Lines |
|
Zane Shelley (7):
support for FFDC-only isolation nodes in chip data
Allow chip data XML to not define registers
Move all simulator test cases to subdirectory
Fix simulator issue with multiple tests using same chip data
Add TLX_ERR_RPT_1 to chip data XML
extra FFDC for Explorer chip data XML
Add OMI_DL_ERROR_HOLD to chip data XML
Change-Id: Ib8e6a4041b5e0a421e992d79c00a5af08bd75c47
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Cezary Zwolak (2):
Save persistent triggers to storage
Read persistent triggers from storage
Change-Id: I57c5e6885b3882e3381944b2a65230e5195dd3bd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayanth Othayoth (3):
MAINTAINERS: Added new reviewers
test: removed unused makefile
phal: Added extensions/phal folder
Change-Id: I2dd528e1ea208ca25c32d7d52665c97d144db520
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
This includes security and bug fixes from the 5.10.50 stable release.
Change-Id: Ieeed859d83b6807409ad123895fb45b9bc905da5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The obmc-mapper.target was installed by phosphor-state-manager package.
It works fine if phosphor-state-manager is installed.
Unfortunately, x86 systems typically uses x86-power-control instead of
phosphor-state-manager to implement the state manager, and the
obmc-mapper.target is missing there. So a system with x86-power-control
does not have a valid obmc-mapper.target, and the services depdend on
the target will be started in unexpected order.
The obmc-mapper.target is really a common target, let obmc-targets.bb
install it.
Tested: Verify the g220a build has a valid obmc-mapper.target and the
phosphor-virtual-sensor service starts after the target.
Also verify the targets in phosphor-state-manager are not
installed.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: Idb069385a6c6c7add5331a1bf3efc0babc005d62
|
|
Patrick Williams (2):
main: remove global exception catch
utils: improve exception string with variant types
Change-Id: I33cf8a918e20886660739f338beada6328ad84b3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Matthew Barth (2):
control:actions: Add timer based actions
control: Ability to set default floor on zone
Change-Id: I88179332a7abd702d72fb8e2184241fa52c853d8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
TESTED: Tested and verified in YosemiteV2.
Signed-off-by: Kumar Thangavel <thangavel.k@hcl.com>
Change-Id: I7bbea7c0caf51fc1fc4acfc6923a795e8b280e6e
|
|
Hao Jiang (2):
dbus-sdr: ipmiSetSensorReading handles discrete event for VR
dbus-sdr: Make VoltageRegulatorMode exposed to sensorTree.
Change-Id: I11a5099091e5d6701f051524a0de1a2ba20fcc41
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Szymon Dompke (1):
Add meson generated files to .gitignore
Change-Id: I4836e5893dc43c0c3bbd388e73cc67a34032ab0b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Pavithra Barithaya (1):
PLDM: Fix in the setNumericEffecterValueHandler
Change-Id: I25f2c7cf46fa8d83cea77209b78e8a0758dca915
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (4):
Collect ramoops data into BMC dump
build: Add wrapfiles for dependencies
Add fmtlib for phosphor-debug-collector
Fix wrong fmt::format strings
Tim Lee (1):
Adjust current size of total dump files in dump directory
Change-Id: I8b84b90cf089127591e64c023c985bb1695b385d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: dts: everest: Add phase corrections for eMMC
Ping Guo (1):
ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine
Change-Id: I7f6f673fd571155e96b5138c653965c262300b87
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Change-Id: Ic13e677f12f09279df19a32d5f381b2f94d8e4b8
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Zach Clark (1):
Add *_current definitions for currently-defined Hostboot BIOS attributes
Change-Id: Id109a7acd0ac28254a2c22eb606d88556b5a33b7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Konstantin Aladyshev (1):
Make SOL layout responsive to the window changes
Change-Id: Ia1c30cbacbdf7244001e88b2432ebf7969869db2
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayanth Othayoth (1):
PEL: move libekb init function to sbe ffdc init
Tim Lee (1):
build: meson fix python command parameter
Change-Id: I488aca759c137af46a9770059b33eaa42d1c918e
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Patrick Williams (8):
server: remove bindings.hpp
message: read: DRY the string specializations
message: use C++14 enable_if_t
utility: dedup_variant: rename in C++14 '_t' style
utility: type_traits: use C++14 '_t' style
use C++17 std::foo_v templates
utility: container_traits: define C++17 _v aliases
message: define and use C++17 style _v aliases
Change-Id: I4cb9faab32494b2cca95ba9121be740612280137
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Derick Montague (2):
Fix cross-browser time formatting bug
Update user privilege table for the operator role
Change-Id: I1602e127be74479734263cf9b5f0b95e036cab43
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Chen Yugang (1):
support BMC boot flag valid bit clearing
Snehalatha Venkatesh (1):
usercommands: Validate reserved field content zero
Change-Id: If103010060dd8f14f7441da8327b94b3221002b7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
P Dheeraj Srujan Kumar (1):
Klockwork Issue Fix : Index range check
Change-Id: I57b0bd9403cd350aca94214d2fbda081acdad607
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
P Dheeraj Srujan Kumar (1):
Klocwork Issue Fix - File Resource Lost
Change-Id: Ia8973e80495aa498a5fb9ba7028db30684b71ac1
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Asmitha Karunanithi (1):
Fix System dump entries route
Ed Tanous (1):
Make code compile with clang-13
Change-Id: I69f9e0d12872b5888b26d35ce1e7deab2240fadf
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
William A. Kennington III (1):
ncsid: build: Fix fallback dependency
Change-Id: I174fa9146d020c00487849fb2e4f1e1efcdc0228
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Lei YU (1):
psusensor: Use configurable read interval
Change-Id: Ic502625a075ef7dc1f17653a0b8b43cec61484a0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Manojkiran Eda (1):
Add support for vendor specific FruDbusLookup
Change-Id: I2fa4902c67d63781b0f5326cd009520109942cb3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
George Liu (1):
Allow disabling SSH
Change-Id: I81ee3e56a16892d281ba07064ea614c76449e9be
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Jayaprakash Mutyala (1):
oemcommands: Validate reserved field content
Vernon Mauery (1):
Add channel support to Get System Restart Cause
Change-Id: I594cb84d5d129aa52223f2aeb3ecdfd56d1828a7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Override coredump.conf and set the max size of coredump to 2MiB.
Tested: Verify systemd removes the old coredumps and makes sure the max
size is around 2MiB.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I9ae2ba46edd2b1e1b12537f12ca09f97882a7d40
|
|
Tested: Run ipmitool sensor list and verify the output is as
expected.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: Ibd81144adf8cb1477a8963cc3b8331b72c1a928b
|
|
ipmb may not be ready for communication when me-time-sync start.
Add some retry so that the time could be synced.
Tested: Test 10 times, me-time-sync can work well
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I93343d2ac17fc13b1d094bf05f424d9cb54cfa3f
|
|
The default http-body-limit is 30 MiB, bytedance's system uses 64MiB
chips so potentially the largest upload size is 64MiB+ (uncompressed
tarball)
Increase it to 65MiB so bmcweb accept such uploads.
Tested: Upload a tarball that is larger than 32MiB, and verify it works
fine.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I0551b34234b14c40d01ea61e88062572deb344c8
|
|
The obmc-mapper.target is removed from the repo and will be installed in
another openbmc recipe.
Bump the srcrev cd0ebe867b..3ac78dfd6e and remove the obmc-mapper.target
from its recipe.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: If01074d52db9690e1b74cc63eed6eceb3e850f60
|
|
Maciej Magdziarz (1):
Firmware: Remove redundant label handling
Sukanya Pandey (1):
Add system table missing properties
Change-Id: Iee97f3b3308891b8712284ce31cfd869b1b45b49
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
P Dheeraj Srujan Kumar (2):
Fix Klocwork Issues - Return from int main()
Dbus_Rest: Fix bmcweb crash
Change-Id: I7454012629bca913f24300b2a9d270fcb15c3d4a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (2):
MAINTAINERS: update email/discord ID for Tom
MAINTAINERS: Replace IRC by DISCORD
Change-Id: I7699bc9c3dbc57a084ed1a349e2d6c6f75390267
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (1):
MAINTAINERS: update email/discord_id for Tom
Change-Id: I59b02e0e21d83950e4d4d487c7d6bb0b5beec1b9
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Tom Joseph (2):
MAINTAINERS: Remove Tom from maintainers list
MAINTAINERS: Replace IRC by DISCORD
Change-Id: I8680858be882f4be328510e59ce59b253d4453e4
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Sridevi Ramesh (1):
BIOS: Add new option value 'ManualOnly' for 'pvm_stop_at_standby'
Change-Id: I751c8117aff9df101b3a657eea3af9ea9a9be852
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Zhikui Ren (1):
fix klocwork issues: Add return 0 for int main()
Change-Id: Id410d75c07c81bc5ae4c6137fe4a0321f236d310
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
No one is using this device on OpenBMC systems, and there is no
code to manage it in phosphor-networkd as of March 2021:
> [...] if you don't add IPv6 addresses to the sit interface
> it doesn't do anything. The defacto way to do that on an interface in
> OpenBMC is to have it managed by phosphor-networkd. On top of this, to
> support sit you would need a way to configure the local / remote IPv4
> addresses used to back it. You can configure the linux kernel to build
> sit functionality but not create sit devices by default (I don't know
> how they haven't changed this yet in default kconfigs...) and it will
> still let you make them on the fly.
Facebook and Google systems force this option off already:
meta-facebook/meta-tiogapass/recipes-kernel/linux/linux-aspeed/tiogapass.cfg:CONFIG_IPV6_SIT=n
meta-google/recipes-kernel/linux/files/gbmc.cfg:CONFIG_IPV6_SIT=n
Change-Id: I9df02c761e82eeb2cca562bf68b9b755bc6feeb9
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.47 through to
5.10.49 stable releases.
Change-Id: I6d78d671405d87b70983b0e507abd0cd531b4aea
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I32e22b2e832998cbcf0dca2cd5f502f0156a0d8e
|
|
Andrew Jeffery (1):
ARM: dts: tacoma: Clean up KCS nodes
Dylan Hung (1):
ARM: dts: aspeed-g6: Fix HVI3C pinctrl function-group
Joel Stanley (5):
ARM: dts: ast2600evb: Enable EHCI controller
ARM: dts: aspeed: rainier: Enable earlycon
soc: aspeed: Re-enable FWH2AHB on AST2600
soc: aspeed: Re-enable XDMA on AST2600
Change-Id: Iee20de1cd1e69bc6f583dfaecd0d7e7688d73419
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I5c3926bd7f021abec612015b5b4f69d9ca2aeb01
|
|
Add events-policy for fp5280g2.
Tested: Test ok.
Example: When the event is triggered, the destination can receive the
snmptrap.
Signed-off-by: Chicago Duan <duanzhijia01@inspur.com>
Change-Id: Ice498f49f348199f3686b8ec3c6575156e47d0f2
|
|
Ben Tyner (1):
Attn: Delay start until after CFAM override
Change-Id: I634e085de94e26d2fc89aa4a5a2b5fbc8e9ea8c0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Rashmica Gupta (1):
Add pressure to unit list
Change-Id: I8490341adeee86003e9db3453996a1cb9f2e7cd7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Enable the new BMC function to look at a CFAM register as a last chance
to see if the host is running.
See the following for more detail:
https://github.com/openbmc/docs/blob/master/designs/bmc-reset-with-host-up.md#note-on-custom-mechanism-for-ibm-systems
openpower-proc-control: srcrev bump f8c14bcfd5..3292c0676e
Andrew Geissler (8):
service-files: move to own sub-directory
primary-proc: move function to common utils
bmc-reset: check if host is running
bmc-reset: ensure error is created if host up
bmc-reset: call new host reset check service
bmc-reset: add support to write a cfam
bmc-reset: add support to clear host running register
bmc-reset: call new clear host running status service
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: If4f7c3a7a58bbe5c7fda09bdc949ed31f5cb1cbf
|
|
Revert back to install phosphor-ipm-kcs to image
Signed-off-by: George Hung <george.hung@quantatw.com>
Change-Id: Iad151c27c1f67fb8c6b8e422dde6a870ff32867f
|