Age | Commit message (Collapse) | Author | Files | Lines |
|
This recipe is only required by the legacy inventory manager, which
is no longer used on Romulus.
(From meta-ibm rev: 952dd07412311c294ad3ad767da97eb2512a781f)
Change-Id: Ide0596e3834d94e1884a470c836bd7717246ec33
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Upstream release notes:
https://open-power.github.io/skiboot/doc/release-notes/skiboot-6.3.html
The stringop truncation warnings were fixed upstream.
(From meta-openpower rev: 645eed6d3f0b2f87604e48a9bdf15868e3f84ff1)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I2b658f56757968c725d2feb600f820d465ee21b4
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
cleanup: delete blob byte printing
(From meta-phosphor rev: 5e8232884e072087514feb0c5f9a9ad28d74cbd6)
Change-Id: I374978e3468586cbfd8f8c72539b4fbe9008feb8
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
A number of bbappend wildcards matched more than what was desired.
Reduce the scope accordingly.
phosphor-dbus-monitor-config-native%.bbappend ->
phosphor-dbus-monitor-config-native.bbappend
phosphor-ipmi-fru-read-bmc-inventory%.bbappend ->
phosphor-ipmi-fru-read-bmc-inventory-native.bbappend
phosphor-ipmi-fru-read-bmc-inventory%/bmc-fru-config.yaml ->
phosphor-ipmi-fru-read-bmc-inventory-native/bmc-fru-config.yaml
phosphor-ipmi-fru-read-not-sent-by-host-inventory%.bbappend ->
phosphor-ipmi-fru-read-not-sent-by-host-inventory-native.bbappend
obmc-op-control-power%.bbappend ->
obmc-op-control-power_%.bbappend
(From meta-ibm rev: c828be02d177ece43006329ee99ca4d2ef733c58)
Tested: bitbake-layers show-appends still shows the witherspoon
bbappends
Change-Id: I5133261a33c4101d6d526355817a0adbac0ce0d9
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Typically it does not make any sense to append to FILESEXTRAPATHS.
FILESEXTRAPATHS is set in a bbappend when overriding something from
another layer. The typical desire will be to make bitbake search for
files in the layer with the bbappend and not some other layer earlier in
the priority list. Further, appending to FILESEXTRAPATHS will introduce
unexpected behavior when multiple layers append the same recipe - layers
with higher layer priorities that append to FILESEXTRAPATHS will find
their files overriden by files in layers with lower priorities.
(From meta-phosphor rev: 3b1f826a641ec83dbc67214912f093e9eb0147eb)
Change-Id: I69549d14397fe6a33ca7113616665481ff143435
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jason M. Bills (1):
Improve Redfish log entry parsing
Jennifer Lee (1):
[Redfish] Fix incorrect mapping of dbus and Redfish API strings for BootSource
(From meta-phosphor rev: 8c482065ee04e81764a98c2abd1b161aeebf178e)
Change-Id: Ib8578031bb3dc45b8fe65f33ed3fd16b53dbe8c0
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Typically it does not make any sense to append to FILESEXTRAPATHS.
FILESEXTRAPATHS is set in a bbappend when overriding something from
another layer. The typical desire will be to make bitbake search for
files in the layer with the bbappend and not some other layer earlier in
the priority list. Further, appending to FILESEXTRAPATHS will introduce
unexpected behavior when multiple layers append the same recipe - layers
with higher layer priorities that append to FILESEXTRAPATHS will find
their files overriden by files in layers with lower priorities.
(From meta-openpower rev: 6e889e3889a474e481dc78890696b922a3bbbafc)
Change-Id: I3607828dea6bd16b457ce3de3a26320ac8525f66
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The #define BMCWEB_ENABLE_REDFISH_ONE_CHASSIS was needed as a short-term
solution for associating sensors with a single chassis on Witherspoon.
This #define is no longer needed due to a bmcweb enhancement that finds
the sensors within a chassis using ObjectMapper associations.
Tested: Built an image with this change, loaded it on a
Witherspoon, and verified the Redfish output for Chassis,
Power, and Thermal requests.
(From meta-openpower rev: 2ae233d116cf9ddcc8b62bd2eaf9970f23830ec6)
Change-Id: I6d4419422f911c4d928e5aa14efb3db7e1969832
signed-off-by: Shawn McCarney <shawnmm@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add ipmb-channels.json as one of the files installed
by the recipe along with the new dependence on json
parsing library.
(From meta-phosphor rev: 7fae19920d69034c6fda91615e85c2b64cf0236d)
Change-Id: I623001bbd55deb85552ca5baa990542b7b289cd7
Signed-off-by: Amithash Prasad <amithash@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ed Tanous (2):
Redfish: fix warning in validator
Redfish: Make sensor names more friendly
(From meta-phosphor rev: ffb484843d39826a1e0e50525e6264b12e99a4f9)
Change-Id: I2b3ceaa01932cc605c5f066780e8d862474a9f9b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
build: conditionally build lpc and pci options
(From meta-phosphor rev: 48f67c6889f0625ac84a26bae25ec79375676d58)
Change-Id: I2879faba4fef5ab532e77f563a2d127682391c4a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Deepak Kumar Sahu (1):
apphandler: move get ACPI power state to new API
(From meta-phosphor rev: 512bef384028a7004f958549a73237fa076b4a9f)
Change-Id: I0a71fb48dce3917ddcde99531fd96efeebb24924
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
simpleupdate: Move code around for future re-use
Johnathan Mantey (1):
Acquire chassis sensors using the sensor association DBus item
RAJESWARAN THILLAIGOVINDAN (1):
Redfish(Network): Implemented PATCH of Nameservers array
Shawn McCarney (1):
Redfish: Remove BMCWEB_ENABLE_REDFISH_ONE_CHASSIS
(From meta-phosphor rev: 092e99ad5634c13b36fc3cce05771c6aa007443f)
Change-Id: Ifa4c00cbe472cac3ac1e80eede318a699320353b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Make dbusconfiguration reloadable without reboot
(From meta-phosphor rev: 1a31b47656a84feda8de2084437864a6ea035fa7)
Change-Id: If02147d896d7ab18ec3690ee2b30fe104deabb3d
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yocto already adds MACHINE as part of the file path.
Tested: Verified witherspoon(-128) and swift still had the correct
gpio_defs.json file in their image.
(From meta-ibm rev: 1de2e7044a1c0fab64209be316f19cb8cd199e35)
Change-Id: Ie2180e4af987e4ee43164c11ac4dacb19eb0ebe2
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yocto automatically adds files/<MACHINE>/ to the file path, take
advantage of this feature to simplify the recipe and directory
structure.
Tested: Built witherspoon, witherspoon-128, and swift, and verified
they had the right conf file:
$ diff tmp/work/witherspoon_128-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/default/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_air.conf \
tmp/work/witherspoon-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/default/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_air.conf
$
$ diff tmp/work/witherspoon-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/default/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_air.conf \
tmp/work/swift-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/default/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@100/max31785@52_air.conf
2,3c2,3
< CRITLO_fan1 = "2974"
< CRITHI_fan1 = "12076"
---
...
(From meta-ibm rev: afdfaba229df3376f17ca063b53c9c8df0d84d0f)
Change-Id: Id24796c17c24aad29770fbd591e885534eeee2f7
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The witherspoon-128 machine has a 'witherspoon' machine override
so it'll pick up anything labeled as 'witherspoon', so no need
to have an append for the 128 flavor.
(From meta-ibm rev: aff453975179c4f57733dc5c209d3eba1cf55b82)
Change-Id: I56cc2c58470cba07774c99c03eb4b155d50c5e1a
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yocto already adds MACHINE as part of the file path.
Tested: Verified witherspoon and swift still had the correct
phosphor-power-supply-1.conf file.
(From meta-ibm rev: 4335b77ce985117765c1b673ba6a1f5ed1183ea2)
Change-Id: Icbfd31f5ba2f8191cf01fac2c0747e948e01b5ba
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yocto automatically adds files/<MACHINE>/ to the file path, take
advantage of this feature to simplify the recipe and directory
structure.
Tested: Built witherspoon, witherspoon-128, and swift, and verified
they all had the correct fans files in their image.
(From meta-ibm rev: 1c8b9d845092ccb6440fc9241993ac3d4db9c2d6)
Change-Id: I2dfa0b04dfba68311d67af10ccfa979f733e630f
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yocto automatically adds files/<MACHINE>/ to the file path, take
advantage of this feature to simplify the recipe and directory
structure.
Tested: Built witherspoon, witherspoon-128, and swift, and verified
they all had the correct avsbus-control script in their image.
(From meta-ibm rev: cd6c8359c35986169e3225f853e38fabb7aade1b)
Change-Id: Id4051ebceef1bee6898d8637381970ba31dc9508
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The witherspoon and witherspoon-128 machines are mostly the same.
Add "witherspoon" as a MACHINEOVERRIDES to witherspoon-128 so that
machine-specific features that apply only to witherspoon, including
file paths, can be added to both flavors of witherspoon automatically.
Tested: Built witherspoon and witherspoon-128, flashed images on
HW and verified witherspoon powered on.
(From meta-ibm rev: 6f44bb26247289aa46c6d21f04617838e596294a)
Change-Id: I18ce6dd799cb0ab52b37f1f1f3d64c6189af4cd8
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away:
WARNING: No bb files matched BBFILE_PATTERN_foo-layer
(From meta-ibm rev: ef6380a81fbd701b1052c12c8163498ba4e2de89)
Change-Id: I1f4ab259befb094983df056c0f0f81cf8dc6f2e3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This recipe is only required by the legacy inventory manager, which
is no longer used on Witherspoon.
(From meta-ibm rev: 7f405bb87d8ce6a0bb2ac50ca56fab90c8bbddf7)
Change-Id: Ia65e74b5ced87466af076bad7ac3d10ec8dcc279
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This recipe is only required by the legacy inventory manager, which
is no longer used on palmetto.
(From meta-ibm rev: ba9dd68aa9d524585878eee61e5bfe1bbef0a5f9)
Change-Id: Id2a4be5f97fd91c4aefeaa23f462c8b69cae5de0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Remove the palmetto override of
PREFERRED_PROVIDER_virtual/obmc-inventory-data as nothing DEPENDS on it.
(From meta-ibm rev: 05d52d6b248c7761e08c02d18cd89c6fd304e062)
Change-Id: Ideabff50e2f492042fe4541a8641f536c14b75f8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop workbook skeleton as it's now obsolete.
(From meta-quanta rev: 6b6f78519cff678e0135298e2fccd00193291e81)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ie1bd674ed2ec905b9d221447630091f3fc998a32
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop the inclusion of a package that is no longer provided.
(From meta-quanta rev: 3f1d96998c127c958c9f105adcf31072e451b134)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia64c547c1073541745a7fd2a336150e0e5e580b5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Drop the duplicate dependency on phosphor-dbus-interfaces from the
phosphor-pid-control recipe.
(From meta-phosphor rev: 2043a7965609b50e2b3dc814404a919788986bd6)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I8ccffb817bf992661798f0f020b364a55f28f529
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The services in obmc-flash-bmc and obmc-mgr-download are deprecated,
remove them.
Tested: Verify the legacy services are not built; and code update works
with APIs described in
https://github.com/openbmc/phosphor-dbus-interfaces/tree/master/xyz/openbmc_project/Software
(From meta-phosphor rev: 005193d919d7d05c1dd83e9fa429805badf9ef15)
Change-Id: Ia462768c51ba5ed1cc1d8523552f6c9570b0877e
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Swift fails to build because fan-presence is a dependency for
fan-control, and fan-monitor is a dependency for inventory.
So add them in swift with an empty yaml file. Also fix the
FILESEXTRAPATHS_append to have the colon at the beginning
(vs prepend where colon goes at the end) to be able to find
the files in the right order.
Tested: Built swift successfully.
(From meta-ibm rev: 2493fdb38e1fe8e1488ea1bcc5c723c788d92bae)
Change-Id: Ie41caf90a15c3c33ef49ce03ce1890ca9f0c7289
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Current list of out-of-tree patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Alexander Soldatov (1):
hwmon (occ): Add temp sensor value check
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Andrew Peng (1):
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
Benjamin Fair (1):
net: npcm: use bitmap functions on link mode params
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (10):
ARM: dts: witherspoon: Enable vhub
media: platform: Aspeed: Remove use of reset line
media: platform: Aspeed: Make reserved memory optional
media: dt-bindings: aspeed-video: Add missing memory-region property
clk: Aspeed: Setup video engine clocking
ARM: dts: aspeed-g5: Add video engine
ARM: dts: witherspoon: Enable video engine
ARM: dts: romulus: Enable video engine
hwmon (occ): Store error condition for rate-limited polls
hwmon (occ): Prevent sysfs error attribute from returning error
Edward A. James (1):
ARM: dts: Aspeed: Witherspoon: Update BMC partitioning
Jae Hyun Yoo (19):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
media: platform: aspeed: fix a kernel warning on clk control
media: platform: aspeed: refine clock control logic
media: platform: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
Joel Stanley (20):
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
ARM: config: aspeed-g5: Add video engine driver
ARM: dts: npcm: Remove use of skeleton.dtsi
dt-bindings: gpu: Add ASPEED GFX bindings document
drm: Add ASPEED GFX driver
drm: aspeed: Clean up Kconfig options
dt-bindings: rtc: Add on-chip ASPEED RTC documentation
rtc: Add ASPEED RTC driver
ARM: config: aspeed: Add P2A and EDAC drivers
ARM: config: aspeed-g5: Remove unused gadget drivers
ARM: config: aspeed-g5: Add ISL68137 and IR38064
Lei YU (2):
ARM: dts: palmetto: Fix flash_memory region
hwmon (occ): Fix extended status bits
Maxim Sloyko (3):
hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller
Patrick Venture (7):
ARM: dts: aspeed: zaius: Fix intersil compatibles
dt-bindings: misc: aspeed-p2a-ctrl: add support
drivers/misc: Add Aspeed P2A control driver
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
dt-bindings: Add ir38064 as a trivial device
dt-bindings: Add isl68137 as a trivial device
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
Tomer Maimon (18):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: dts: npcm7xx: Add PECI description
ARM: config: npcm7xx: Enable PECI driver
Vijay Khemka (1):
misc: aspeed-lpc-ctrl: make parameter optional
krzysztof.adamski@nokia.com (1):
pmbus: support for custom sysfs attributes
(From meta-aspeed rev: a1594746d761ae3fd57c8e8419c8129e78b6634a)
Change-Id: I83486a54d00afb6162ab1a3c9ee3a082241f109b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away:
WARNING: No bb files matched BBFILE_PATTERN_foo-layer
(From meta-aspeed rev: 1d2385f66eebac4548d7512b75f26fc641548c02)
Change-Id: Ia4101252ce6dc9ec0ebc920103ef3b5417775c2e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Richard Marian Thomaiyar (1):
Expose product id in entity-manager baseboard
(From meta-phosphor rev: 9284517b90275004d11e1e3edabcd5c9ed6cfe77)
Change-Id: Id5031d456fc9d5bdd82e5f4a724032178e2bcbe5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cheng C Yang (1):
Add PSU PWM sensor to support FSC
(From meta-phosphor rev: 97cad8ef11427288641ad04803adb1cf78891941)
Change-Id: Ic5b065e24367b8f821059f76a11d65a59a18cd15
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Santosh Puranik (1):
sensordatahandler: Support empty inventory interfaces
Vernon Mauery (1):
Return invalid data length (0xc7) for commands not properly unpacked
(From meta-phosphor rev: 6c3a86a036ff5fdf4fea1ac64b68dc4dd676cbdb)
Change-Id: I134ad1b7aa514c4f54ca2fe934d59ebe3759b598
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Vernon Mauery (1):
Add vmauery to the sdbusplus maintainer list
(From meta-phosphor rev: 4adcda8f219840b5218b93028b64e814c9775010)
Change-Id: I044aadda7749383bf8f67f0f286ba8a09bf1b880
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Consolidate all util.hpp
Patrick Venture (3):
main: drop log file path check
split parameters for logging and tuning
explicitly expect a directory for logging
(From meta-phosphor rev: 160bd289f9b27c2d00c73c5846879d5144f60af6)
Change-Id: Ic6c82a280d9b1d6a718fcb0ad1f0b3fd92e2e171
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jason M. Bills (5):
Remove the static Base Message Registry file
Parse Message Registry header info from the file
Remove the static OpenBMC Message Registry file
Construct Redfish messages using the Message Registry
Use syslog for Redfish messages
(From meta-phosphor rev: 668f9d78c8f39116875aec90811c8dcf89827f35)
Change-Id: I9cfaaadd92058ffb23496a1a6043a7f2a2ee69df
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jason M. Bills (1):
Get the initial IPMI SEL Record ID from syslog
(From meta-phosphor rev: b7cdb96d6cbc3d5a12279ede941cc28211b233c5)
Change-Id: Id66b2751e5497f0e0e5ecbbdc0412a68bb491295
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (2):
tools: io: do aligned read/write mapping
bugfix: build: s/enanble/enable/
(From meta-phosphor rev: 9e2cbba3a3c92be45e3340a397978e035e8dbd8d)
Change-Id: I20d9fc290e70614b2e5063b21ed1ad7999a5ba32
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
dixsie (1):
Fix system overview edit hostname form validation
(From meta-phosphor rev: 1544ffc80f904f6daecf1e1b3d674389ab41a077)
Change-Id: I2c0e77029e4d756b84254790caedabf1c3d54038
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
FieldMode: Add NotAllowed error
Marri Devender Rao (1):
Remove unused Install error yaml file
(From meta-phosphor rev: 47ee56ebb194d85d4ed55662792bb8b035146375)
Change-Id: I59dc3eff36444f06d57fe0b9589934f71b271006
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
When building this package bitbake emits an error, and has sone so for
over a year:
WARNING: openpower-occ-control-1.0+gitAUTOINC+6d6d1b380a-r1
do_configure: QA Issue: openpower-occ-control: configure was passed
unrecognised options: --disable-gen_errors [unknown-configure-option]
I do not understand this flag, but it appears to be ignored by the
package so we should drop it.
Resolves https://github.com/openbmc/openbmc/issues/2941
(From meta-openpower rev: e64624bc00cf036b3d964c79ddd3ae326df2452a)
Change-Id: I7d34202a5f25ed01453165b901a44bdb63c019e1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The phosphor-host-ipmid's apphandler relies on the obmc-bmc-version
virtual package.
Add virtual package that provides an implementation of the
xyz.openbmc_project.Software.Version interface.
(From meta-phosphor rev: 00e88bfaa5767c9ba984e5da3b9beaf37ad54cf3)
Tested: Verified quanta-q71l-variation build continues to build.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: Ia1e5b6ed2ca0af40e2b764a38c48a8b61e292c98
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The phosphor-host-ipmid's apphandler relies on the bmc-state-manager,
therefore add this run-time dependency on the virtual package.
Add virtual package that provides an implementation of the
xyz.openbmc_project.State.BMC interface.
(From meta-phosphor rev: 68f126163ce73e241f07d24d5be5bb0cd72d5c29)
Tested: Built quanta-q71l-variation.
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I24683cda94e41ec6f8800b6830bfb07e48c4c4d0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use the immmediate expansion operator when setting BBFILE_PATTERN. This
makes meta-phosphor consistent with all the layers in meta-openembedded.
(From meta-phosphor rev: 8640c4a464677f2e446a13e67686bf1be336fbef)
Change-Id: I23f7fbbcc637e6c6e0a11956a703c0439f53ad4a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-ingrasys rev: 67480036566266a3501bf42e230b5a0c0b7fd82e)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: I9e9075907fe994606a09fd6965888e9585463381
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away.
(From meta-ingrasys rev: 7a286ca0dba71a6ef309ff031cafc06e2c00cb8d)
Signed-off-by: Patrick Venture <venture@google.com>
Change-Id: If0d38267efdf74a6d010278b5604ac517f4487da
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Bitbake uses this regex to associate recipes and bbappends from BBFILES
(which contains recipes and bbappends from -all- layers listed in
bblayers.conf) to this layer. The association is then used to map the
BBFILE_PRIORITY value for this layer onto the recipes provided by this
layer.
BBFILE_PRIORITY is used to determine which recipe to use when the same
recipe appears in multiple layers.
Without BBFILE_PATTERN set, recipes in this layer will get a default
priority and not the priority specified in BBFILE_PRIORITY.
This layer doesn't set a priority anyway, so functionally this patch is
a noop but it is an improvement from a correctness standpoint, and it
makes a warning go away:
WARNING: No bb files matched BBFILE_PATTERN_foo-layer
(From meta-ibm rev: 32cabcf8a5f70946d80f51ac41917987f6118031)
Change-Id: Iad810a7a9606a2aee1982337508d1be24cff79f8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Use the immmediate expansion operator when setting BBFILE_PATTERN. This
makes meta-fsp2 consistent with all the layers in meta-openembedded.
(From meta-ibm rev: a44ea07451e667912a6d99d56d4ae61df92b282d)
Change-Id: Ib2d0daaca371b9c2a837b601a257e498d236688c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|