summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-09-04linux: Move to 4.18 based treeJoel Stanley3-14/+13
This rebases the OpenBMC kernel tree on a 4.18 base. There are 85 patches backported from 4.19-rc1, and the following 39 out of tree patches: Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Jeffery (8): ARM: dts: aspeed: witherspoon: Update max31785 node dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers Benjamin Herrenschmidt (4): ARM: dts: aspeed: Romulus system can use coprocessor for FSI ARM: dts: aspeed: Palmetto system can use coprocessor for FSI ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto ARM: dts: aspeed: Add Power9 CFAM description Brad Bishop (1): ARM: configs: Remove atags from Aspeed G4 config Christopher Bostic (1): iio: dps310: Temperature measurement errata Cyril Bur (1): misc: Add ASPEED mbox driver Cédric Le Goater (6): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency ARM: dts: aspeed: Add "spi-max-frequency" property Edward A. James (2): drivers/fsi: Add On-Chip Controller (OCC) driver hwmon: Add On-Chip Controller (OCC) hwmon driver Joel Stanley (15): ARM: dts: aspeed-palmetto: Add LPC control node ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node ARM: dts: aspeed-ast2500: Update flash layout ARM: dts: aspeed: Add LPC mailbox node ARM: dts: aspeed: Enable mbox iio: Add driver for Infineon DPS310 ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed: Enable VHUB on Romulus drm: Add ASPEED GFX driver drm: aspeed: Debugfs interface for GFX registers dt-bindings: gpu: Add ASPEED GFX bindings document ARM: config: aspeed: Add out of tree drivers ARM: dts: Add OCC description to Power9 dtsi (From meta-aspeed rev: 2f1187b1bff8d52ddd93f2c5b598eec7ddc9f4f6) Change-Id: I4035abcdcfa9a083599e27661fed5351fc6532fd Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-04phosphor-hwmon: srcrev bump 901f117733..043d32306eAndrew Geissler1-1/+1
Patrick Venture (1): add .clang-format (From meta-phosphor rev: 91825c03eb7151ad917e9aec3266ba9fcaaef947) Change-Id: Ia4b07602ebe5ea6e4c06c33ab77f0b257f63ea26 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-04phosphor-webui: srcrev bump 1ca1d7e10e..e364faa031Andrew Geissler1-1/+1
Gunnar Mills (2): Move to clang-format-6.0 Remove hack for 1/0 booleans (From meta-phosphor rev: bd847c188b7acb547578bf9e0321c9709ae03d55) Change-Id: I081a828f4c342c9fac3f35a293a285252a7ead6b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-01phosphor-pid-control: srcrev bump da4a5dd133..991cf8757bAndrew Geissler1-1/+1
Patrick Venture (1): clang-format: always break template declarations (From meta-phosphor rev: 655f0aa9f1eecd3fe8fc18cbdc9a7b61a2fa38d6) Change-Id: Ibd33b6b42c5b650fd41a6998595c3fddfeba5e65 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-09-01phosphor-state-manager: srcrev bump 9eab98618f..a965cf06a6Andrew Geissler1-1/+1
Andrew Geissler (1): Clang 6 updates (From meta-phosphor rev: 6357b1f20015296afba97a4bb2c1efea03b7db8f) Change-Id: I7be8c3dc99a65d5113075a90929946ecb44320b3 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31bmcweb: srcrev bump 9b243a4ee4..a38b0b2063Andrew Geissler1-1/+1
Ed Tanous (1): Resolve issue with duplicated static files (From meta-phosphor rev: 0e517f8a431289ddb1e02b2eaaa990114f259ce1) Change-Id: I7780e6155645ff8c53157056dcbb7e470baefd3b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31sdbusplus: srcrev bump 69425eb7d3..8ce61e4e20Andrew Geissler1-1/+1
Vernon Mauery (1): Allow callback raw access to message William A. Kennington III (1): configure: Fix --disable-tests (From meta-phosphor rev: 8d64ddbe545c58c2f0c4d6f0a73a658996f11b94) Change-Id: I425468e87b726bff0dcea6ba80b80ee9e6a72878 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-logging: srcrev bump 9fab279fb3..5ac1bde129Andrew Geissler1-1/+1
Deepak Kodihalli (3): phoshor-rsyslog-config: wrap utils::restart phosphor-rsyslog-conf: add unit tests phosphor-rsyslog-conf: add unit tests (From meta-phosphor rev: 39ae434fa51513aa0715df0e772555cfeea0af0c) Change-Id: I94e70f3b53bce4f285d8b1aedb61e6cdd3338230 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-fan-presence: srcrev bump 86be476bfb..ecd4bc7bf2Andrew Geissler1-1/+1
Andrew Geissler (1): Add -flto to CXXFLAGS (From meta-phosphor rev: 7aefde2c1c20dac9271fab604c203dbe615de349) Change-Id: I2dcb4e619c1c81b50697864689acb72b08b82f4c Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-pid-control: srcrev bump 40be36ac31..da4a5dd133Andrew Geissler1-1/+1
Patrick Venture (1): add .clang-format (From meta-phosphor rev: 2cc612c2f8a3d2ca01e3fc43c0434184cd625d0f) Change-Id: Ic033237071af7c8e413f48c8531319be721367bc Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-webui: srcrev bump dc36acc943..1ca1d7e10eAndrew Geissler1-1/+1
beccabroek (1): Event log select all checkbox (From meta-phosphor rev: 512574c50df3fd68f8a5cee2fb3327a48e85da32) Change-Id: Icf12e56cbb2865753d36a333cc1e5b37e77e887e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-dbus-interfaces: srcrev bump 5af83f1528..e0e9aed2beAndrew Geissler1-1/+1
Lei YU (1): EpocTime: Use proper errors on setting time failure (From meta-phosphor rev: b12dda36607e5770afb5b19cc861baea645ded87) Change-Id: I7e4125dec6938d92b76be606d245d4e7e1f36216 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-networkd: srcrev bump ad21fc2a86..189d44edddAndrew Geissler1-1/+1
Patrick Venture (1): reorder headers (From meta-phosphor rev: c37be581778d36913e5398928e91dcc64214f791) Change-Id: I6d8819481f422bbba531709bc96148a94374f58f Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-inventory-manager: srcrev bump 566e096e97..d6819c9fccAndrew Geissler1-1/+1
Andrew Geissler (1): Add -flto to CXXFLAGS (From meta-phosphor rev: 9ddb021682a17da707003bef3da43dce08f0cb0a) Change-Id: Id50cf65ab4650569b421cc91a1b659f079fec139 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-dbus-interfaces: srcrev bump 4132f4b6b1..5af83f1528Andrew Geissler1-1/+1
Adriana Kobylak (1): Control: Make PowerSupplyRedundancy const (read-only) Andrew Geissler (1): Add -flto to CXXFLAGS Deepak Kodihalli (1): Add errors to Network/Client interface (From meta-phosphor rev: 96dc4d450b840533b771f3c3848b3cb47a6b4891) Change-Id: Icb0dccfc6d0647837dfb2ac4d840d4b477a21ba4 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31openpower-pnor-code-mgmt: srcrev bump c39d923fee..8be32f7ba3Brad Bishop1-1/+1
Andrew Geissler (1): Add -flto to CXXFLAGS (From meta-openpower rev: 4ef98b10b0b1cc60a1ddb0bea43b74891c8ff0b7) Change-Id: Ic173839a87cd2458ab821905d45c1eb0331e7e97 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31skeleton: srcrev bump 5da4f4fc17..d7a8ba5b58Brad Bishop1-1/+1
Adriana Kobylak (5): fan_control: Move to using xyz.openbmc_project.Sensors configs: Remove BootProgressSensor configs: Remove the OperatingSystemStatus sensor configs: Remove BootCountSensor configs: Remove TurboAllowedSensor Matt Spinler (16): Add function to load in the GPIO data from JSON. Add documentation on GPIO JSON Use cJSON to read the GPIO configuration Use cJSON to get the GPIO definitions Fill in function to convert GPIO pin to a number Fill in the function that finds the GPIO base Remove host control GPIOs from GpioConfigs Call gpio_inits_done() from GPIO consumers Remove unnecessary args from GPIO functions Point obmcutil chassiskill code at the GPIO JSON Remove the GPIOs from Witherspoon.py Remove the GPIOs from Zaius.py Remove the GPIOs from Lanyang.py Remove the GPIOs from Palmetto.py Remove the GPIOs from Romulus.py Remove the GPIOs from S2600wf.py (From meta-phosphor rev: a3c2e523e1cd83b088cb70ccd6d3fdc697785c1f) Change-Id: I847dfae765dfea67738bc93bd589621ab9249849 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31pyphosphor: srcrev bump 216b518a3c..f63e191ca6Brad Bishop1-1/+1
Adriana Kobylak (4): sensors: Remove BootProgressSensor sensors: Remove OperatingSystemStatusSensor sensors: Remove BootCountSensor sensors: Remove TurboAllowedSensor (From meta-phosphor rev: da48ad15d35d36a73f440cc7efb2f1da48e603e4) Change-Id: Iec930d45b7b7f390073b83d27fb420529940ca9c Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31Restructure phosphor-logging recipeDeepak Kodihalli1-3/+17
Restructure phosphor-logging recipe to allow additions of packages. (From meta-phosphor rev: 38af2c0d75122aecaeac53c0190884a48885f6a6) Change-Id: If187200a0874bc0c9ce6e4d759a2e1ca7ea7ffc8 Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31Revert "Disable forwarding of journal to syslog"Deepak Kodihalli2-14/+0
This reverts commit cffe1bf83203854489e7b8bab81c9188143f7ab5. This is to enable syslog daemons to forward journal logs to a remote server. (From meta-phosphor rev: 03f3dbd09e50b6e63418118df6e2267a2ba650bc) Change-Id: Ie1ff86a2f48e77227eda60f2f047e6f33ff7b01c Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31bmcweb: srcrev bump b79d4eef01..9b243a4ee4Brad Bishop1-1/+1
Ed Tanous (2): Add json to the known content types Make dbus monitor compatible with phosphor-rest (From meta-phosphor rev: fb386a7e5cd0f760a47f5de7f9ec3445ff27ca03) Change-Id: I62bca43b27272e9800e9207bf222bda532d71229 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-rest-server: srcrev bump 3a9a51c969..6691e7ca4eBrad Bishop1-1/+1
Adriana Kobylak (1): rest_dbus: Add read-only property error Matt Spinler (1): Explicitly convert dbus.Booleans to bools (From meta-phosphor rev: a2c69d7b18c201dc2e7b269eb436d87cfa54654e) Change-Id: I11889bb8c9bebc02e5eef6b64dca0c47a6ba0781 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-snmp: srcrev bump f3fac2228a..f4ecf88338Brad Bishop1-1/+1
Gunnar Mills (1): Fix broken link (From meta-phosphor rev: 8a34d2d33b124170321cfe18a0082a44bee81083) Change-Id: Ia68dc83f7743a7b320c9cfac6aae201addceebc0 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-pid-control: srcrev bump 64f072a74c..40be36ac31Brad Bishop1-1/+1
Patrick Venture (1): add missing gmock header: read|write interface mock (From meta-phosphor rev: 2d789d810dc9b74817760473ea25d631c0183ff5) Change-Id: If44eb6054745b5e42594059cd92ae31ebd7c6fa7 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-webui: srcrev bump 1073c1490f..dc36acc943Brad Bishop1-1/+1
Gunnar Mills (6): Add Power Usage Page Remove unused chassisPowerOn Set the power cap Add config.json file Remove double variable set Remove 2nd CopyWebpackPlugin var beccabroek (1): Checkbox not selected with 0 log events selected (From meta-phosphor rev: 9568968e0534f24e1a23a2be64706cb089b94dab) Change-Id: I1f4b29550d112d2da6f02c3250ab6e7f578ee301 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-logging: srcrev bump 477b731ad0..9fab279fb3Brad Bishop1-1/+1
Deepak Kodihalli (5): documentation: markdown header level fixups Add application to configure rsyslog phosphor-ryslog-conf: add way to disable logging rsyslog-conf: add validation and error handling phosphor-rsyslog-conf: implement restore (From meta-phosphor rev: ea6a3d1ce6e1921e7e729a71c68cbfed3b564676) Change-Id: I97cf268e88b94bcc9efad6991a2291e8cb15d061 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-31phosphor-bmc-code-mgmt: srcrev bump 28b2ba4a2d..76c79df3fcBrad Bishop1-1/+1
Andrew Geissler (1): Add -flto to CXXFLAGS Lei YU (3): Make MEDIA_DIR configurable Delete functional BMC id if ACTIVE_BMC_MAX_ALLOWED is less than 2 static layout: Support field mode (From meta-phosphor rev: 1b7c30dcac5dff739a6ccb66ccd20ed632511f9b) Change-Id: If5b70e8c063b86c9ee8dbc6bcd433b52b0a7d5e4 Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-30poky: sumo refresh 874976b..45ef387Brad Bishop89-351/+2720
Update poky to sumo HEAD. Alexander Kanavin (1): openssl: fix upstream version check for 1.0 version Andre McCurdy (19): openssl_1.1: avoid using += with an over-ride openssl_1.1: minor recipe formatting tweaks etc openssl_1.0: merge openssl10.inc into the openssl_1.0.2o.bb recipe openssl_1.0: minor recipe formatting tweaks etc openssl_1.0: drop curly brackets from shell local variables openssl_1.0: fix cryptodev-linux PACKAGECONFIG support openssl_1.0: drop leading "-" from no-ssl3 config option openssl_1.0: avoid running make twice for target do_compile() openssl: remove uclibc remnants openssl: support musl-x32 build openssl: minor indent fixes openssl_1.0: drop obsolete ca.patch openssl_1.0: drop obsolete exporting of AS, EX_LIBS and DIRS openssl_1.0: drop unmaintained darwin support openssl_1.0: add PACKAGECONFIG option to control manpages openssl_1.0: squash whitespace in CC_INFO openssl: fix missing dependency on hostperl-runtime-native openssl_1.0: drop unnecessary dependency on makedepend-native openssl_1.0: drop unnecessary call to perlpath.pl from do_configure() Andrej Valek (3): openssl-1.1: fix c_rehash perl errors openssl: update 1.0.2o -> 1.0.2p openssl: update 1.1.0h -> 1.1.0i Anuj Mittal (1): wic/qemux86: don't pass ip parameter to kernel in wks Changqing Li (1): unzip: fix CVE-2018-1000035 Hongxu Jia (2): nasm: fix CVE-2018-8883 & CVE-2018-8882 & CVE-2018-10316 patch: fix CVE-2018-6952 Jagadeesh Krishnanjanappa (19): libvorbis: CVE-2017-14160 CVE-2018-10393 libvorbis: CVE-2018-10392 flac: CVE-2017-6888 libarchive: CVE-2017-14503 libsndfile1: CVE-2017-14245 CVE-2017-14246 libsndfile1: CVE-2017-14634 coreutils: CVE-2017-18018 libgcrypt: CVE-2018-0495 git: CVE-2018-11235 gnupg: CVE-2018-12020 shadow: CVE-2018-7169 procps: CVE-2018-1124 python: CVE-2018-1000030 qemu: CVE-2018-7550 qemu: CVE-2018-12617 perl: CVE-2018-6798 perl: CVE-2018-6797 perl: CVE-2018-6913 perl: CVE-2018-12015 Joshua Watt (2): alsa-lib: Cleanup packaging swig: Remove superfluous python dependency Ovidiu Panait (1): openssl-nativesdk: Fix "can't open config file" warning Ross Burton (6): bzip2: use Yocto Project mirror for SRC_URI classes: sanity-check LIC_FILES_CHKSUM openssl: disable ccache usage unzip: fix symlink problem bitbake: utils/md5_file: don't iterate line-by-line bitbake: checksum: sanity check path when recursively checksumming Change-Id: I262a451f483cb276343ae6f02c272af053d33d7a Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-29bitbake: tests/fetch: Update gnome.org urls after upstream changesRichard Purdie1-2/+2
(Bitbake rev: 822dd77333896538393c657dd220d8f66d8a46a7) (From poky rev: edabecd5764078b539daf35848ff4b107cd65c44) Change-Id: I9da025690a8578b8f14e399a16997a34b2769bf3 Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-29Add S2600WF GPIO JSONMatt Spinler2-0/+48
These GPIOs are used by the code in the skeleton repo. (From meta-intel rev: 5ed9fa2b7afcf26db471f13845c47950939a517f) Change-Id: I40004c8b9d5258dd0af6d702b02768835820eaa1 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-29Add Lanyang GPIO JSONMatt Spinler2-0/+79
These GPIOs are used by the code in the skeleton repo. (From meta-inventec rev: 6abf0600f408fc66d182e829c60a3ea807e49ffa) Change-Id: Ia0e3b5ddf720163b039c0b5d70f23b83833e4d93 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-29Add Zaius GPIO JSONMatt Spinler2-0/+79
These GPIOs are used by the code in the skeleton repo. (From meta-ingrasys rev: 5d62d701c830a68eb2ca20246535787ea4456355) Change-Id: I999f36730a33dd61051a9ce691fdfb8fd05a9ec5 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Add Palmetto GPIO JSONMatt Spinler2-0/+61
These GPIOs are used by the code in the skeleton repo. (From meta-ibm rev: 2ba966c18046651d2115d732cbb0ed8b231bafad) Change-Id: I58a5087252b5dc6a98174837305485925c07c712 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Add Romulus GPIO JSONMatt Spinler2-0/+73
These GPIOs are used by the code in the skeleton repo. (From meta-ibm rev: 55b2003b3e07c7d45f94409eaf636f0335571152) Change-Id: I88f44342a587b8dccaa845bff59c35e1414d1358 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Add Witherspoon GPIO JSONMatt Spinler2-0/+64
These GPIOs are used by the code in the skeleton repo. Resolves openbmc/openbmc#3332 (From meta-ibm rev: b11913ce2ee64a085fd69146eb76a3ebff94e7ab) Change-Id: Ic82d55bae6c7772cb8a5b836fb6138f429dd0346 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Install GPIO definition JSONMatt Spinler2-0/+9
The code in libopenbmc_intf.so looks for the GPIO definition file /etc/default/obmc/gpio/gpios_defs.json. Install it from this recipe. The actual JSON files should go into the corresponding directories in the machine layers along with a bbappend of this recipe to set FILESEXTRAPATHS_prepend. (From meta-phosphor rev: 728258c6a235f75176ea213e671d7a93904ca72a) Change-Id: I3969e005cbdfd04ae8cec1c13c3c3bb625dca574 Signed-off-by: Matt Spinler <spinler@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28phosphor-software-manager: Add ACTIVE_BMC_MAX_ALLOWED configLei YU2-0/+3
For static flash layout, configure ACTIVE_BMC_MAX_ALLOWED to 1, because it has only one active BMC image; For ubi-fs, configure ACTIVE_BMC_MAX_ALLOWED to 2, because ubi-fs assumes there are two BMC images by default. Resolves openbmc/phosphor-bmc-code-mgmt#2 Tested: Verify that ACTIVE_BMC_MAX_ALLOWED is set to 1 for Romulus build, and set to 2 for Witherspoon build. (From meta-phosphor rev: bf3edf1ce09f19836c38c2dd43ab4e50664fc46e) Change-Id: I60e49c14bda25547fde9a2308470ed164ebbd249 Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28phosphor-software-manager: Add MEDIA_DIR configLei YU2-0/+13
Configure MEDIA_DIR to /run/media for static flash layout; Configure MEDIA_DIR to /media which is default for ubi-fs. Resolves openbmc/phosphor-bmc-code-mgmt#3 Tested: Verify that the MEDIA_DIR is set to /run/media for Romulus build, and set to /media for Witherspoon build. (From meta-phosphor rev: f43eb6ee89433e4898cbdb1532963f038419c003) Change-Id: If96c2ee135d314bd6de0cd745c6a871b75183fe1 Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Make obmc-flash-bmc-setenv common for static and ubiLei YU2-7/+13
Static flash layout will use obmc-flash-bmc-setenv service to set factory-reset env in u-boot, so make it common for both static and ubi flash layout. Tested: Build the image and verify the service and the obmc-flash-bmc script exist in both static and ubi builds. (From meta-phosphor rev: b2c944f13b0f891a7f569f3a9608e3c0de27a462) Change-Id: Ia067cebfe35a9d2d7d2af8b4d1bd4cb5717372ae Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28meta-lanyang: add IPMI recipeBrian Yang6-0/+1279
Add CPU, DIMM and Motherboard inventory for Lanyang machine Tested: Built the IPMI recipe then read the information of the CPU, DIMM and Motherboard's inventory after power on. (From meta-inventec rev: 9d47808f7e1a582a7001b11bb9419742b17d4a1c) Change-Id: I0b550daa15bc9ab73948075e7cc1ac172612e88f Signed-off-by: Brian Yang <yang.brianc.w@inventec.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Disable bmcweb static hosting in IBM layerAndrew Geissler1-1/+1
openbmc/bmcweb#5 tracks an issue with bmcweb and static hosting of web files on IBM systems. Until this bug is resolved, disable bmcweb from hosting the files. Currently in the IBM layer, bmcweb is only used for redfish support and the static hosting is not needed for the basic redfish support to work. Testing: Verified bmcweb now starts fine and responds to redfish requests. (From meta-ibm rev: 8891e02efa759bb3173a0985f194c1e9a0bc255b) Change-Id: I1f1ac2008afdb787de6b034a71b6ed6b2d51422b Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Add recipes-phosphor to Palmetto's recipes.txtGunnar Mills1-0/+1
Fix Palmetto's recipes.txt. (From meta-ibm rev: 543acb28fc1ee93a819de955f4a14dd5d0fee499) Change-Id: Ibfe2724dc65122d23070396867a97064ac4e1124 Signed-off-by: Gunnar Mills <gmills@us.ibm.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28linux: Move to 4.17.18 stable releaseJoel Stanley1-2/+2
This updates the kernel to the latest 4.17 stable release. (From meta-aspeed rev: 76cf24ad58962b882bd28a6f8c55c30930c4db77) Change-Id: Id1e482bbbba4b9cae6e882be99a47612862855ee Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28linux: Move to 4.17.18 stable releaseJoel Stanley1-2/+2
This updates the kernel to the latest 4.17 stable release. (From meta-nuvoton rev: 8730f2ecb7acdc3bf27c20a4d9b6c70fad9eab11) Change-Id: If07d6ce0942671cd112fa05713850d42cf55317e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28meta-palmetto: Update occ sensor namesLei YU1-22/+22
Update occ sensor names to make it consistent with Witherspoon. Tested: Verify the sensor names are updated via REST API. (From meta-ibm rev: fc7a1853fd16af0e58bcf104bd1f9585b1f36a20) Change-Id: Ia2b31ecfd591c580d8ec382fe7d26b30fd34d427 Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28meta-openbmc-machines: Remove BarreleyeJoel Stanley36-3779/+0
Barreleye was the first machine to be designed and built for the IBM OpenBMC project. It no longer builds and no one has stepped forward to maintain it, so this removes it from the tree. Resolves: openbmc/openbmc#2777 Change-Id: I4b2fd53f1a72fe5a5b7ed700dd451b98cebfa445 Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-08-28Increase witherspoon host console log to 256KAndrew Geissler1-0/+1
The host team has requested a bump in their allocated log size. Appears as if witherspoon has the filesystem space to spare so bump up from the default of 16K to 256K. Testing: Loaded on system and caused a lot of traffic in host console and verified /var/log/obmc-console.log did not grow beyond 256K and properly wrapped. (From meta-ibm rev: 50ba839a2ee314b06b21273ff4a4a9456baef6d2) Change-Id: Ie9a7f003778b3e38f7a444f32d69942bcfc1575b Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Add cjson recipeEd Tanous1-0/+15
CJson is a support library implementing json support for C libraries. It is relatively small, and compliant enough for secure systems usage. More information can be found in the CJson homepage here: https://github.com/DaveGamble/cJSON Tested by: "bitbake cjson" and saw no build failures. (From meta-phosphor rev: 908d4f44184e34e0d13e6017221122ab5915a310) Change-Id: I8b9fcbc5ce0ffe556da8bfa6b1d84c527160a65e Signed-off-by: Ed Tanous <ed.tanous@intel.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28gpioplus: Add libraryWilliam A. Kennington III1-0/+23
Tested: Package builds successfully and the output looks correct. (From meta-phosphor rev: cb1a1831baa36b0e6bb5e199a333255f42d3593e) Change-Id: I6aa75e0147793b13992bd05ac9efffbaef19c092 Signed-off-by: William A. Kennington III <wak@google.com> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2018-08-28Sumo refreshBrad Bishop185-2020/+8805
Update external subtrees to latest Yocto sumo. Change-Id: I8364f32bef079841c6e57f1c587f4b1bedf62fef Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-13 15:33:06 +0300