Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit adds the TSC (Technical Steering Committee) info
to the openbmc/openbmc README.
As suggested in and partially implemented in
https://gerrit.openbmc-project.xyz/c/openbmc/docs/+/28107 the docs
README is specific to the docs repo and the openbmc/openbmc README
is for more general project information since the openbmc/openbmc
README is most likely the first landing spot of anyone new to
the project.
Change-Id: I539357bd78dbad39bda874b68a4acb587ecb5595
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
User management and Virtual media are done.
Change-Id: Ided3ed088cbcfadf9c9d94af5667977ebbb27246
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Clarify that users should not open issues for questions.
There has been a fair amount of issues opened for general questions,
this aims to cut back on that.
Change-Id: I1048ca9c1ff801789ae7c61ecd8caed4103e4eb3
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
|
|
Joel Stanley (1):
control-host: Use fsi-master class paths
(From meta-phosphor rev: 0ae881fcff8fcc08cb8a0254b3a57204868d0ba1)
Change-Id: Iae7752927aa75e3a9ce6fc86da7d37b5d5b027fc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alexander Filippov (1):
Fix ECC usage of being cleaned partitions
(From meta-openpower rev: ea1e440136215ae1403e84dbd8eaf1181cbfdcfe)
Change-Id: Iaf349669c23e1892cd897d5253e209d845fdd8f6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alex Qiu (1):
Sort the device list in devices.hpp, and add MAX31730.
Zhikui Ren (1):
convert sysfs gpio usage to libgpiod
(From meta-phosphor rev: 964f21291bef0ff469976edb7d2ca8f2138cc34a)
Change-Id: I95b8d116c489a3dc976d9eacc71ac8d9d3fb8b82
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Log the Host DC On/Off redfish messages when the host state is changed
(From meta-phosphor rev: a01b3b50e048ca0eb8daf6e338a795838975b6fb)
Change-Id: I1efbbe491b946f8fcca3bc537009e6ffcb10467a
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
Add availability decorator interface
Vikram Bodireddy (1):
Add Staged to activation
(From meta-phosphor rev: d52a80881e406e1ecf8ed3d5b711ff1ad69b4b17)
Change-Id: Ia8a3faf43295db05ab42478deec90728d41f0657
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Rajashekar Gade Reddy (1):
Fix cc issue in setLan cmd for MAC addr parametr.
William A. Kennington III (1):
app/watchdog: Always use resetTimeRemaining
(From meta-phosphor rev: 4d76f302143e27dcb2a6dc13d043b58c55d0f109)
Change-Id: If411c19eb4298bead4a8713778fa623363450dbb
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alex Qiu (1):
HwmonTemp: Support more than 2 temperature readings; add support for MAX31730.
Zhikui Ren (1):
convert sysfs gpio usage to libgpiod
(From meta-phosphor rev: 48a360175604fc59b40eb9a3b5db129dede3a58e)
Change-Id: Ic2ff7188162eedc9449de1f048627f75d86c92f7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Deepak Kodihalli (1):
getBIOSAttrCurrValue : construct attr value table
George Liu (1):
libpldm: utils: Add crc8 implementation
John Wang (6):
libpldm: bios: Implement iter for attr value table
libpldm: bios_table: Make auxiliary handlers const
libpldm: Add API to find an attribute value entry
Add vgcore to gitignore
Add cc only response
Implement GetBIOSAttributeCurrentValueByHandle
Sridevi Ramesh (1):
Adding support for GetDatetime BIOS command in pldmtool.
Xiaochao Ma (1):
Modify the comments of the declaration
(From meta-phosphor rev: b815171056fa97861e75ed2587d410a15aa59b60)
Change-Id: If9c033b121a4df9c3e0945e12a47194b52276f98
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
only return fw images in FirmwareInventory
James Feist (2):
Add IndicatorLed to Chassis Schema
Revert "Connection and websockets fixes"
Suryakanth Sekar (1):
bmcweb: Message entry for user security Event
(From meta-phosphor rev: 27bc208081b47e2004a4c2772e3a39bf8fe93016)
Change-Id: Iff1cac017e2f8d4628b47a715d3910c11b77f404
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Added postd and post code manager to maintain post code
history.
(From meta-facebook rev: 490ef71e8264426363344566cb99cccf6bddd1b5)
Change-Id: Ia56d8474f139440abd8a827282252728b0ab6031
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This moves the OpenBMC kernel to a Linux v5.4 base.
(From meta-nuvoton rev: c57a5fa88a0bb79729298095d16ec9dac6a0a067)
Change-Id: Ieaa63dba85172b1c7d6d0ee2d12f3e20cccdd0a6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Johnathan Mantey (1):
Eliminate expensive DBus transaction in Get Device ID
(From meta-intel rev: 10e8f2392e971d7c39758bb747999c4f583322df)
Change-Id: I9b6e976bd0b064c0b0eb720e3c6f34ac56c2ee3f
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Disable MDR V1 related OEM commands
(From meta-intel rev: efc7e72da07da5cf8a372bc437f1abdd307c1340)
Change-Id: I8ca7f5acc5d6e68a43a27ddf4c9fa345ac85fada
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Log the Host DC On/Off redfish messages when the host state is changed
(From meta-intel rev: 8d9439266b7db8b3a706b1a218e499d671f67c31)
Change-Id: I3d06eb789c82d5114642f5d9967ce47b13f3d038
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Link to libgpiod for ipmid to dlopen this .so file correctly
(From meta-intel rev: 80593be5e3736aff3b3569f1f148f26645d17c6c)
Change-Id: If5f7f0450112765fc9e711f699985fd0bff82534
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Upstream now accepts linker flags from the environment, so remove
the hard codeded --hash-style=gnu option from the conigure step.
Jason Albert (3):
Add ecmdChipTarget hash support to pyapi
Defined __deepcopy__ functions on classes
Added python support for vector<vector<databuffer>>
Joel Stanley (2):
Fix device paths again
server: Fix linking
Kahn Evans (10):
More complete use of ECMD_REMOVE_SCOM_FUNCTIONS compile flag
Use chipUnitNum instead of core in targets
Resolve doxygen errors/warnings
Adding spy APIs to pass in multiple images
Updated query code as well
Use const ecmdChipTargets in new APIs
update to version 14.19
Revert to checking all return codes instead of just a single one for non-enum retry.
Syncing up with what's in Cronus
Use system _AIX compile flag
Lakshminarayana R. Kammath (1):
Adding support for LDFLAGS and SLDFLAGS to pickup value from environment
Matt K. Light (6):
update fapi2::ReturnCode
get/putspi
get/putspi links and htxt
fix doxygen param name
fix serverlock authorization storage
fix target for ecmdGetPbaUnit
(From meta-openpower rev: c02a90c17ab5b19bd1c2d4db3cb5af78ac474b2a)
Change-Id: If64c0394ed0d39cac432c205785eb4ce2069d662
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: Add host FSI description
Vijay Khemka (3):
drivers: ipmi: Support for both IPMB Req and Resp
drivers: ipmi: Support raw i2c packet in IPMB
drivers: ipmi: Modify max length of IPMB packet
(From meta-aspeed rev: 50412aa4f96d20200140451aa0357f2d4017f40a)
Change-Id: Id976f0c9c3c0a488d4e756ebf4d93e678dad7fec
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Armin Kuster (10):
apparmor: add distro check
smack: add distro check
python-fail2ban: Drop python2 package
python3-fail2ban: include python-fail2ban.inc
google-authenticator-libpam: update to 1.07
smack-test: add feature check for smack
lib/oeqa/runtime: fix clamav test order
clamav: update to 0.101.5
meta-integrity: fix issues with yocto-check-layer
fail2ban: fix runtime error
Change-Id: I4f7e656b0f9e2e9dc32989a1756c94e4e0143c42
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrei Gherzan (2):
raspberrypi-firmware: Update to current HEAD
linux-raspberrypi: Bump to 4.19 recipe to 4.19.88
Leon Anavi (1):
pi-bluetooth: Runtime depends on udev-rules-rpi
Michael Baisch (1):
linux-raspberrypi.inc: no longer set CONFIG_LOCALVERSION to empty string
Pierre-Jean Texier (3):
linux-raspberrypi-rt: bump to revision e2e9cec
rpi-gpio: bump to version 0.7.0
raspi-gpio: bump to revision 4edfde1
Change-Id: Ibd557330128fe2b6afbefd2234e411b45f265aeb
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Iwona Winiarska (1):
nbd-proxy closing fixes
jayaprakash Mutyala (1):
msg_registry:Added PowerSupplyConfigErrRecovered
(From meta-phosphor rev: 52e6d3a19c22953831ce43511a4db197b8909dca)
Change-Id: Ia76ea0e66e23648c5d6349be446ea2ac5daa9dd6
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
Update ioctl header
Yong Li (1):
Fix duplicated/missed PSU logs in redfish
(From meta-phosphor rev: 3f951e9973c362d110bf81e090d88b2d1db1b016)
Change-Id: I1753304f5dbec70c73e7784b06296bcdc7be2bc3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Geissler (1):
remove libboost_system dependency
(From meta-phosphor rev: 1803bbfbc4e9ddbb374ea49d31b5687555350820)
Change-Id: I1bfcbcba07c38324094a0412acd7d9e7730e3d63
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Brad Bishop (1):
autojson: don't check non-json files
HCL-BMC (1):
Add json config for Facebook Yosemite V2 platform.
James Feist (2):
Add Motherboard property to WFT-Baseboard
Add Panel interface to front panel
(From meta-phosphor rev: cbf9fa6261170a72c9df5c932555d8a428d1061f)
Change-Id: Iec579fd3b6989fc70a2ece853943fde907c2ce84
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.8 stable release.
(From meta-aspeed rev: c04542140556963e58b0dab3dace24d429f622dc)
Change-Id: I400e60f6cbc12a79e8621e874db41fdc3d816e31
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Brandon Wyman (1):
ARM: dts: aspeed: rainier: Fix fan fault and presence
Joel Stanley (5):
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
(From meta-aspeed rev: 3be097fea0f324227c890b58c50148316c8eae9d)
Change-Id: I85613c9929c2aabb02cf0f474d57fd8eb8d8c2f6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.5, 5.4.6 and 5.4.7
stable releases.
(From meta-aspeed rev: 97f7573559d0616aad7ca22c4355cbe08156311d)
Change-Id: I4bd32bea1378408234806129171a18cddc333ed7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
peci: Fix function declaration
Jim Wright (3):
dt-bindings: hwmon/pmbus: Add ti, ucd90320 power sequencer
hwmon: Add support for UCD90320 Power Sequencer
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
(From meta-aspeed rev: 744ebe8b97e094432fcc9e1c4db968e5dc1b6b0f)
Change-Id: I721c2d444ab746a927ea800686f63bfac9138aa4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Added restart cause command after taking watchdog action. This
will update dbus status for restart cause of host.
(From meta-facebook rev: 6a85046dcc41024e52ffe4a5a8678548c54ee38b)
Change-Id: I057a441a26310f80837a8fe742b669b69cf3d26e
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
There was a issue in power cycle command as poweron was sent
immediately after poweroff where as power status didn't change
so poweron command was ignored. So adding sleep of 6 sec before
sending poweron.
(From meta-facebook rev: 83af1046a8719f6ad44f80a2cce4f8b0dc9565f7)
Change-Id: I8907643578983b8b3851523c780bc59e5528baac
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
srcrev bump 38183d6670...f43fad4232
Vijay Khemka (6):
Support for add and get boot order
Move debug card config file
Add support for debug card critical sensors
Add precision in critical sensor
Add critical sensor units to lcd display
Add dynamic precision in critical sensor
Moved config file from ipmi-providor to lcd-debug on target.
(From meta-facebook rev: fa9b43bcce88b3fc7ecefe82942a6a8beff2d89e)
Change-Id: I29723497b24245c40abafb8323c14fbe63f0a59a
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Added initial recipe file for post code manager. It saves history
of post codes.
(From meta-phosphor rev: 28c16972c6b3e8e9a2392b4b0fd54d6c897f6438)
Change-Id: Ia13d480d148ffeb73ac9fd0ea7e4eba85b506530
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
jayaprakash Mutyala (1):
bridgingcommands:Read event msg buf & update flag
(From meta-intel rev: 12361ce5d94f4e63c6b80fb73783f464ec4d84db)
Change-Id: Ifcf73adb115e57e2e3c2c4bbbab63daf568d2591
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Josh Lehan (1):
Correct calculations of IPMI coefficient math
(From meta-intel rev: c72e11b692f49954456d1d7cffbc82d3f5a1034e)
Change-Id: Ib34c9a24150667a910b1ca701e8b961d1697b012
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Zhikui Ren (1):
convert sysfs gpio usage to libgpod
(From meta-intel rev: 0c071ab85b21f967b0958836104f4dcb09024ce1)
Change-Id: I2ea7c7f8f2781c000ea17404c46514f7750c08f3
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This moves the OpenBMC kernel to a Linux v5.4 base.
There are 161 patches in dev-5.4. Of these 69 are backported from
upstream, leaving 92 out of tree patches.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (12):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
Arnd Bergmann (1):
ARM: aspeed: ast2500 is ARMv6K
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (21):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (5):
i2c: aspeed: Add AST2600 compatible
hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
hwmon: (pmbus/ibm-cffps) Fix LED blink behavior
hwmon: (pmbus/ibm-cffps) Add version detection capability
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (13):
ARM: dts: aspeed: peci: Add PECI node
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (9):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed: ast2600evb: Enable FSI master
usb: gadget: Quieten gadget config message
clocksource: fttmr010: Parametrise shutdown
clocksource: fttmr010: Set interrupt and shutdown
clocksource: fttmr010: Add support for ast2600
watchdog: aspeed: Fix clock behaviour for ast2600
ARM: config: aspeed: Update defconfigs
Revert "ARM: dts: aspeed: peci: Add PECI node"
Johnny Huang (6):
pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config
pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux
pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file
pinctrl: aspeed: Use masks to describe pinconf bitfields
pinctrl: aspeed-g6: Add AST2600 pinconf support
Tali Perry (2):
dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation
i2c: npcm: Add Nuvoton NPCM I2C controller driver
Tomer Maimon (12):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree
dt-bindings: peci: add NPCM PECI documentation
ARM: dts: npcm7xx: Add PECI node
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 6d863dd22836673ccd2a5d40778a3d5e4e03d7ea)
Change-Id: I8f43925375c26bc88f94eee13430fcb03252b8ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Yong Li (1):
Adjust the PSU related log level
(From meta-phosphor rev: d34272236883488bffbeeca67b85bdbce77843a6)
Change-Id: Ib4fcbcd3e7c468182120c5a88b5cd9a094f4d2cd
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Armin Kuster (6):
meta-security: add layer index callouts
meta-security-compliance/conf/layer.conf: fix typo
python3-suricata-update: update to 1.1.1
libhtp: bugfix only update 0.5.32
lib/oeqa/runtime: suricata add tests
suricata: update to 4.1.6
Philip Tricca (1):
tpm2-abrmd: Port command line options to new version.
Trevor Woerner (1):
tpm2-abrmd-init.sh: fix for /dev/tpmrmX
Yi Zhao (1):
libseccomp: upgrade 2.4.1 -> 2.4.2
Change-Id: Ic00ca8ac8ff5d3fbe0b79aa4a42243b197080f14
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
Make the max http request body size configurable
Ed Tanous (2):
Remove #include of self
Implement a TODO(ed) in comment
Jan Sowinski (1):
Connection and websockets fixes
Zbigniew Kurzynski (1):
Turning ON the mutual TLS
(From meta-phosphor rev: be7988f3c7e0a0cc5dd0d359ec4810a7da068eef)
Change-Id: Idf80dd08c2370f32902953fa73c813bc8a5910ed
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Gunnar Mills (2):
Users: Update Callback/NoAccess Role
Users: Role Table: Update ssh
(From meta-phosphor rev: 2c400bafce6097464d368d9314d8bd81abd7eb0d)
Change-Id: I6daf7a73f4c65c25a30d746cac94c016bef3eec5
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
James Feist (1):
FruDevice: Don't scan Mux bus if root is in blacklist
(From meta-phosphor rev: 59c9c8853bfbe10e8333ef3743ec5767a4c234f0)
Change-Id: Ic4ec1b34e20aba2c5f0f64fae72dc2be08afca31
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
We aren't correctly escaping all of the specical characters based on the
systemd spec for unit name escaping. systemd provides a utility to do
this reliably, so use that instead of a custom implementation.
(From meta-phosphor rev: e1acbce6ac818e411cee8483c89ea6f7b0829162)
Change-Id: I239f396f92e6a6b94edcfe48084c41dcc292e1b7
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Johnathan Mantey (1):
Emit correct error code when "reserved" fields are modified.
(From meta-phosphor rev: 5ebd4e211c4948016916524792cbcd6ef955f089)
Change-Id: I2991c0dc0b4565a0564409b13e9a148051480a4b
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Harisuddin Mohamed Isa (1):
PEL: Filled in PEL value descriptions
Matt Spinler (3):
PEL: Fix message registry schema typo
PEL: Add repo function to get a PEL FD
PEL: Add API to get the PLDM instance ID
(From meta-phosphor rev: a4c74aa783c9c286997d11eb3635145e2d4590b0)
Change-Id: I3205bb2fcd502310f1dc7c4428c3aa270d54d1fc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jason M. Bills (1):
Always return Message Tag and Remote Console Session ID
(From meta-phosphor rev: ed6472b27d2e81282fbddfce8853eca2698fe757)
Change-Id: Iebfe9bf0ceee53540f2872cceac0945d8b6629da
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
AppaRao Puli (1):
Fix: bug fixes in readJson
Jason M. Bills (2):
Fix $metadata/index.xml parse error
Consolidate regex calls when converting links
RAJESWARAN THILLAIGOVINDAN (1):
Fix authorization for LDAP users
(From meta-phosphor rev: 5e35dbbec02a84112d084a876f0b6d9c9b77e327)
Change-Id: I5bd851bbcb08b299ea1ddef17550d17a4cce41ae
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Wiktor Gołgowski (1):
User logged in when IsAuthenticated cookie is set.
(From meta-phosphor rev: 0ef53041cf7efdc6e0bd81636ed2ccfc65b8368b)
Change-Id: Ic859b2d93be25901c43be029910a00e9a6bc900c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Artem Senichev (4):
Allow using fsp-trace from current directory
Fix parsing "Creator subsystem" field
Add source file name to fsp-trace output
hostboot: bump version 3920d160..0921b80a
(From meta-yadro rev: 1e65c1adfc33232d89e9deb50e436c2356317f6a)
Signed-off-by: Artem Senichev <a.senichev@yadro.com>
Change-Id: If56a76133bb9fff94638fafe5428969797b257a8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|