summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-21phosphor-fan-presence: srcrev bump 7072237b9a..bff172aa07Andrew Geissler1-1/+1
Matthew Barth (1): power_state: Catch DBusServiceError and wait Change-Id: I3251a2662ff91c17e4db7f7933c8946a2d30caf4 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-21pldm: srcrev bump a137f903b5..ea72f240bbAndrew Geissler1-1/+1
Deepak Kodihalli (1): Initial version of pldm_fwup_pkg_creator.py Ilya Smirnov (1): Add Secure Version Lockin BIOS Attribute Sridevi Ramesh (1): bios: Remove two unneeded bios attributes as mentioned below Change-Id: I09227020d4f8a02e7dff7f0cf2e1fb281bcf26f8 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-21dbus-sensors: srcrev bump 12c2c0ef53..18fffd3d4dAndrew Geissler1-1/+1
Andrew Jeffery (1): NVMeSensor: Fix ordering of member initializer list Change-Id: Ib810726969399e70d4bdd63a1200310cedbe5d31 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-21meta-aspeed: linux: Enable CONFIG_IPMI_KCS_BMC_CDEV_IPMILei YU3-0/+3
The CONFIG_IPMI_KCS_BMC_CDEV_IPMI is necessary for the new KCS driver refactor to create the ipmi-kcs devices. Tested: Verify on g220a that the ipmi-kcs3/4 devices are created and the inband IPMI via KCS works fine. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: I2a1e7842f231fb4ee8284c194ed9cf28f668885e
2021-06-21AST2600: Update default env for multiple FIT configEddie James1-5/+7
Add environment variables to the AST2600 to boot a certain FIT configuration of the kernel based on the "fitconfig" environment variable. The boot command will fall back to the default FIT config in case all other boot attempts fail. Also fix the kernel boot arguments in the case that boot failure occurs. The boot sequence would be: - boota with fitconfig, if it fails: - boota without fitconfig, if it fails: - bootb with fitconfig, if it fails: - bootb without fitconfig Tested: Set fitconfig to a dummy variable, and also changed the bootm command to a dummy command to force a boot failure, and verified the sequence was as expected: ast# boot boota Error loading kernel FIT image with fitconfig rainier-dummy Unknown command 'bootm-dummy' - try 'help' Error loading kernel FIT image bootb Error loading kernel FIT image with fitconfig rainier-dummy Unknown command 'bootm-dummy' - try 'help' Error loading kernel FIT image Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Change-Id: I14cf935a707bdb95b0a6e4e607919ea0e027d18c
2021-06-18meta-fii/meta-kudo: Set Ampere CPU LPI_FREQ_DisableXP Chen1-0/+2
Add method to disable LPI mode for Ampere CPU when flash kudo bios Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com> Change-Id: Ieec4b93bceceb9e809482b14686582d0b1cbc971
2021-06-18meta-fii/meta-kudo: Update kudo.conf with latest changesXP Chen1-5/+5
1. Fix kernel_partiton offset after changes to upstream 2. Fix mac address settings for eth1 Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com> Change-Id: Ia959dadce1c3336e4860c205d5702b186d11beff
2021-06-18meta-google: metrics-ipmi-blobs: Clean up recipeWilliam A. Kennington III1-12/+1
We no longer need the extra levels of indirection or dev-so overrides. Change-Id: I537fda462ce8d96baab409afe332d4be3d6f3eca Signed-off-by: William A. Kennington III <wak@google.com>
2021-06-18webui-vue: Add a task to find node licencesJason M. Bills3-1/+473
Many open source licenses require the module and license to be identified in the image. Yocto provides this capability for the modules that it includes; however, this doesn't cover the modules that npm includes during the build of webui-vue. This change adds a new module named 'nlf' to find and create a summary of the nodes and their licenses. The nlf recipe file was generated automatically with: devtool add 'npm://registry.npmjs.org;package=nlf;version=latest' Then a new 'find_node_licenses' task in the webui-vue recipe uses 'nlf-native' to create a summary and save it to the webui-vue license directory where Yocto stores its license info. Tested: Confirmed that the nlf recipe builds. Confirmed that the 'find_node_licenses' task runs and that the license summary is available under 'build/tmp/deploy/licenses/webui-vue/node-licenses' Change-Id: Ia53f6e463db6966f450be2a37dc82a3c5e3f76c1 Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com>
2021-06-18bios-settings-mgr: srcrev bump 96e72ec579..5e2cb7206eAndrew Geissler1-1/+1
Snehalatha Venkatesh (1): Change Resetflag from default to Noaction Change-Id: I9bcb29b75833dd04fb6ee1e989fcb5b8573ba76e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18phosphor-inventory-manager: srcrev bump ab1f8b520a..903b0de230Andrew Geissler1-1/+1
Santosh Puranik (1): serialization: Use Cereal NVP Change-Id: Id22b2394cb30eff0c7a1e0b6422bf3995f59095d Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18debug-trigger: srcrev bump 20017150d2..15fe59cb0fAndrew Geissler1-1/+1
Andrew Jeffery (1): meson: Remove redundant udevrules list Change-Id: Ia35655f677b159744f7b103698eee4e1561fa427 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18bmcweb: srcrev bump b937830fe5..0256b69420Andrew Geissler1-1/+1
zhanghch05 (1): Add compile flag to turn off the old Power/Thermal Change-Id: Id69ac91633c13f6b283a916e6f4f26545edd5c3b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18phosphor-power: srcrev bump aacc2aafa5..d3a70d9876Andrew Geissler1-1/+1
Adriana Kobylak (1): psu-ng: Update supported configuration properties Change-Id: I4d09abbad020339d2938193f8cc7ab8e865e1e7e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18entity-manager: srcrev bump 6d649821da..7d53601257Andrew Geissler1-1/+1
John Edward Broadbent (1): change source URL for boost Change-Id: I91f5c1daf5f8df28850790655daf2f36e4a68d31 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18dbus-sensors: srcrev bump 1263c3dad3..12c2c0ef53Andrew Geissler1-1/+1
Zhikui Ren (1): ThresholdTimer: use weak_ptr in async callback Change-Id: I7861205f4d12241737d68a9e8fe5fbdb4893e847 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18phosphor-nvme: srcrev bump d5838d1bbb..9ebfa481ceAndrew Geissler1-1/+1
George Hung (1): Emit the threshold alarm signals to trigger SEL logs Change-Id: I2489df9e780f59d2d93fe9ea0b8914ae718d999f Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18libmctp: srcrev bump a523bcc102..507ba00dadAndrew Geissler1-1/+1
Andrew Jeffery (2): libmctp: Add subdirectory for systemd metadata systemd: Own service startup ordering with respect to pldmd Change-Id: Ia08b9b8bc7ff891a3e9f194f49295780987972b3 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18phosphor-logging: srcrev bump 0866c3fc66..d354a39835Andrew Geissler1-1/+1
Andrew Jeffery (1): log_manager: Remove designated initializers Jayanth Othayoth (2): PEL: set pdbg environment variable PEL: move pdbg init function to sbe ffdc init Ramesh Iyyar (1): PEL: PHAL: Changed existing reason code instead use component id Shantappa Teekappanavar (1): PEL: message_registry - Add an entry for WatchdogTimeout Vijay Lobo (1): PEL: Support eventId property Change-Id: I848bd5429b2fd9d7929af693c45766fe07e56836 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18pldm: srcrev bump cb0982ba18..a137f903b5Andrew Geissler1-1/+1
Jayashankar Padath (1): fru: Add new inventory items in the fru parser Manojkiran Eda (1): Remove Inventory Manager dependency for pldm Pavithra Barithaya (1): PLDM: Remove Boot Progress entry from 11.json Tom Joseph (1): requester: PLDM handler for async request/response Change-Id: I76b5512fa5fe58b25b5d9f1e4d5e54f5a62927f5 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18google-misc: srcrev bump b63d6314d0..548f3ad151Andrew Geissler1-1/+1
William A. Kennington III (2): acpi-power-state-daemon: build: Subproject support metrics-ipmi-blobs: build: Install module in blob-ipmid Change-Id: Iea5cb82293a8d306063a0f8f1e265525cf5c14a8 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-18meta-quanta: gbs: Modified pid sensor type from margin to tempGeorge Hung5-530/+646
- Remove read-margin-temp files and codes - Modified sensor type in pid json to temp setpoint set to target temp Kp set to Kp * scalar Ki set to Ki * scalar - Pre-detect nvme present status in fan-table-init.sh, and delete settings if nvme present is false. Signed-off-by: George Hung <george.hung@quantatw.com> Change-Id: Iba4ac164a7a39ca1be109301402911d432294997
2021-06-18meta-fii/meta-kudo: Increase obmc console logs size to 1MMohaimen Alsamarai3-7/+3
Increase the /var/log/obmc-console*.log file to 1M Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com> Change-Id: I07cecebb6fe9c1d8e2d123951c67b3d33ce0da3b
2021-06-17meta-ibm: linux-aspeed: p10bmc: Enable magic sysrqAndrew Jeffery1-0/+1
Currently /proc/sysrq-trigger is the only supported backend for debug-trigger. Once we have kdump support, we'll add a kexec backend and drop the magic sysrq. Change-Id: I07dfa50474d9f6333428b6fb38020c7b7fd0adec Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2021-06-17meta-ibm: Add debug-trigger to p10bmcAndrew Jeffery2-1/+4
Change-Id: Ic1cde1cd67fa6f8f68df80a1f327ace64a39d72b Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2021-06-17meta-phosphor: Add debug-trigger recipeAndrew Jeffery1-0/+34
debug-trigger listens for an external signal that the BMC is in some way unresponsive. When the signal is received it triggers a crash to collect debug data and reboots the system in the hope that it will recover. Change-Id: Ib8ea615c2944edb0448b06c333b6e2abbea15687 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2021-06-17meta-quanta: gbs: avoid to set LED config to D-bus failedGeorge Hung1-0/+5
Use mapper get-service to check if each LED D-bus is ready and also make LED group service restart not too fast when the serive start failed Signed-off-by: George Hung <george.hung@quantatw.com> Change-Id: Idd002e4f42d2664bc2f573a8dcc1afcfa593178a
2021-06-17meta-quanta: gbs: replace nvmem sysfs path by eepromGeorge Hung1-1/+1
Since the nvmem sysfs path would use nvme config id in kernel 5.10, replace nvmem sysfs path by eeprom to compatible with all kernel version Signed-off-by: George Hung <george.hung@quantatw.com> Change-Id: I861f9bf8e26bf5b96e0727d4dfb3e2a7e4032116
2021-06-17meta-aspeed: aspeed-g6: Enable KCS adapter for raw SerIOAndrew Jeffery1-1/+2
Raw SerIO is used by the debug-trigger application to take signals from the host that applications are unresponsive on the BMC for p10bmc systems. Change-Id: Ie5ee683c3b08ebe922f2c5a7b5bf52b1e18069f4 Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
2021-06-17linux-aspeed: KCSJoel Stanley1-1/+1
Andrew Jeffery (16): ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties ipmi: kcs_bmc: Make status update atomic ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi ipmi: kcs_bmc: Turn the driver data-structures inside-out ipmi: kcs_bmc: Split headers into device and client ipmi: kcs_bmc: Strip private client data from struct kcs_bmc ipmi: kcs_bmc: Decouple the IPMI chardev from the core ipmi: kcs_bmc: Allow clients to control KCS IRQ state ipmi: kcs_bmc: Enable IBF on open ipmi: kcs_bmc: Add serio adaptor dt-bindings: ipmi: Convert ASPEED KCS binding to schema dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet ipmi: kcs_bmc_aspeed: Optionally apply status address Change-Id: If4267164d165c0ecb5039d55438d4a58926ecce3 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-17meta-google: gbmc-ncsi-config: Set NICEnabled propertyVivekanand Veeracholan2-0/+22
Sometimes the phosphor-networkd starts before systemd-networkd finishes configuring NCSI interface. This causes phosphor-networkd to mark this interface as unmanaged. Setting NICEnabled property to true will ensure the interface is enabled. If this service starts before systemd-networkd is done, the set-property command will fail. So retry till the command succeeds. Signed-off-by: Vivekanand Veeracholan <vveerach@google.com> Change-Id: I232d363cff48bbf955ac0f1f9a6dac7ae5467257
2021-06-17evb-ast2600: enabling u-boot-spl featureTroy Lee1-1/+2
Currently, machine evb-ast2600 frozed during u-boot booting. This patchset has been tested with AST2600-A1 and AST2600-A3 EVB: AST2600-A1: ``` U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000) already initialized, Trying to boot from RAM U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000) SOC: AST2600-A1 RST: WDT1 SOC PCI RST: #2 LPC Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB), ECC off MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK In: serial@1e784000 ``` AST2600-A3: ``` BP0c00 U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000) already initialized, Trying to boot from RAM U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000) SOC: AST2600-A3 RST: WDT1 SOC PCI RST: #2 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII Model: AST2600 EVB DRAM: already initialized, 960 MiB (capacity:1024 MiB, VGA:64 MiB), ECC off MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK In: serial@1e784000 ``` Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Change-Id: I77ec3c2928ca96ee3f51290fd3435fca08bb058a
2021-06-17phosphor-ipmi-blobs: srcrev bump 52b75fb392..d5ed40999fAndrew Geissler1-1/+1
William A. Kennington III (6): utils: Deduplicate library loading utils: Make loader more lenient treewide: Remove unused variables ipmi: Remove non-standard c++ array syntax build: Add meson meson: Install headers Change-Id: Ia7253baea8f3f40f12b2d5e9b9b13a475363d4f3 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17meta-openpower: convert op-proc-control to mesonAndrew Geissler1-3/+4
This includes the following bump: e22e8231c4..e04c1173c1 Andrew Geissler (3): gitignore: ensure utest.cpp not ignored meson: remove old automake files meson: fix static initialization order race condition Jayanth Othayoth (1): Fix related P10 SPI mux settings Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Iff99f6536d2552984bb08c2e3267c36cde1bf8d4
2021-06-17x86-power-control: srcrev bump afd04f0283..b4d03b1399Andrew Geissler1-1/+1
Vernon Mauery (1): Add power/reset button mask checks for RequestedHostTransition Change-Id: I10bd493c7c357b93d9c39435e271d4a6d1efbef4 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-fan-presence: srcrev bump fdfcc679e6..7072237b9aAndrew Geissler1-1/+1
Matthew Barth (83): control: Remove use of static lib JSON objects control: Self registering action objects framework control: Add all fan functionality to JSON fan object control: Add creating config object without a dbus object control: Construct events' groups control: Update JSON action objects to run the action control: Create manager object for JSON configs control: Split JSON and YAML based binaries control: Parse/add zones to manager control: Add fan objects to their zones control: Use group objects in actions control: Remove JSON zone object include of YAML zone object control: Remove references to "speed" in JSON objects control: Fill in `requestIncrease` method control: Remove ZoneHandlers from JSON zone object control: Use JSON zone object's dbus property methods control: Add zone setTarget required functions control: Add request target base action control: Add set target on missing owner action control: Extend actions from the config base object control: Add count state set target action control: Add net target increase action control: Add net target decrease action control: Handle adding timers and when they expire control: Update config loading control: Add zone increase & decrease timers control: Restore `Current` property for each zone control: Update zone target on startup control: Load JSON configured groups and events control: Remove `json_parser` source control: Handle empty profiles for configuration objects control: Use Group objects in events control: Create config key check function control: Add event actions control: Provide zones to the events control: Set groups & zones on event actions control: Group configuration inputs should be const control: Update base action object with zones and groups used control: Actions use list of groups set on base object control: Timers no longer need the zone and group control: Handle updating service states control: Provide pointer to manager object to events control: Add getBus() and getGroups() functions for triggers control: Add event trigger creation control: Add timer trigger support control: Remove `path` argument to add services control: Correct which json object used in event actions control: Copy everything in Group copy constructor Add `getManagedObjects` method call control: Setup to subscribe and handle signals control: Add signal triggers with propertiesChanged signals control: Add interfacesAdded signal support control: Add interfacesRemoved signal support control: Add nameOwnerChanged signal support control: Get property from cache and add objects control: Add init trigger support control: Extract bus object from config argument pack control: Switch to using static instance of bus control: Set owner state for all service entries control: Support switch to 'default_ceiling' control: Handle `Current` property changing control: Optimize loading/configuring event groups control: Remove JSON event precondition support control: Remove event `getActions()` control: Store/use trigger enable functions on events control: Remove manager parameter from create trigger function control: Separate zone creation from enabling control: DBusZone object for dbus objects control: Manage zones' dbus interfaces with a DBusZone object control: Support reloading configurations with SIGHUP control: Introduce `poweron_target` configuration attribute control: Make decrease interval optional control: Set fans to `poweron_target` at poweron control: Remove manager JSON config Only load compatible interface objects once control: Add successful configuration file loaded message control: Add ObjectManager interface json: Use a single list of compatible values json: Add constructor for loading a fan app's config file(s) control: Load config file(s) when available control: Store signal packages as a reference control: Temporarily handle starting at poweron control: Enhance handling exceptions restoring `Current` mode property Change-Id: Ie4cc6f83a7e45ae706a7c10f893a8c3ef897efd6 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-post-code-manager: srcrev bump 0171dd6bce..b84fea4efeAndrew Geissler1-1/+1
Ravi Teja (1): Fix DeleteAll to set boot count 0 Change-Id: I5784117931029d90aec6d73be517ca4d9443e9ab Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17bmcweb: srcrev bump 938f25685f..b937830fe5Andrew Geissler1-1/+1
Charles Boyer (1): log_services: Fix system dump entries route Ed Tanous (1): Remove ambiguous privileges constructor John Edward Broadbent (1): Remove duplicate Managers field Vernon Mauery (1): Free cert usage before return Change-Id: Ib72db608c719d3e9f28a36fcfdaa8d2fabe83af2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-host-ipmid: srcrev bump 90e81fa2bc..7fd91fa260Andrew Geissler1-1/+1
Joshi-Mansi (1): Change read count to 255 in Master Write-Read Cmd Change-Id: I3c5fbfcc7371366adef0d5b19ae304d1f329883b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17pldm: srcrev bump 772403b934..cb0982ba18Andrew Geissler1-1/+1
George Liu (1): Fix the return value of pack_pldm_header and unpack_pldm_header Tom Joseph (1): Fix: uninitialized local variable Change-Id: I8373b2d04738fff38bb361ea9a409723c40f4de3 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17openpower-vpd-parser: srcrev bump 90a63b9bfd..3aec478741Andrew Geissler1-1/+1
Andrew Jeffery (2): README: Fix rendering of Overview header meson: Add global arguments before invoking the compiler Change-Id: I6eae713dde3cffc8b4730ca7ef63afc9cf1da401 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17stdplus: srcrev bump af0e0e81a1..20cab0c5e3Andrew Geissler1-1/+1
William A. Kennington III (4): exception: Fix noexcept qualification exception: Add ignoreQuiet functionality cancel: Add cancelable utility cancel: Add utility for always running callback Change-Id: Id5424dae2b4676c845d0fd1430e56bf82670aa62 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-bmc-code-mgmt: srcrev bump cfb4b2099f..fa79914baaAndrew Geissler1-1/+1
Isaac Kurth (1): version: Add metadata to MANIFEST errors Change-Id: Ib58d9eced3efb15aff36d624e7a3152b8d5caf82 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-logging: srcrev bump b6b2557555..0866c3fc66Andrew Geissler1-1/+1
Jayanth Othayoth (6): PEL: enable base infrastructure for SBE FFDC base PEL create PEL: Create TemporaryFile class PEL: API to convert FAPI based data to PEL format PEL: move jsonCalloutSubtype const definition to header PEL: Add SBE FFDC process function PEL: enable SBE FFDC support in pel log Matt Spinler (1): elog-gen: Install elog-gen.py Change-Id: I061381eaf9d4ec7ba47e37838c73d41f6b2a8df2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17phosphor-led-manager: srcrev bump cc9a575399..9d9ab2291dAndrew Geissler1-1/+1
George Liu (2): Replace find method with contains method Fix utest-led-json.cpp should not depend on use-json Seires Li (1): meson: support custom led yaml path William A. Kennington III (1): build: Tests should default to auto not enabled Change-Id: I65bc41355034a753f74cd4969f551eb7794ded10 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-17peci-pcie: srcrev bump d570dfd4f3..1e17d33ee7Andrew Geissler1-1/+1
Jae Hyun Yoo (1): Fix a build break in the latest yocto tree Change-Id: I3133bfe5f49eab06f6bfd4e752418dfca1c039c7 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-16intel-ipmi-oem: srcrev bump 5235ae9ab3..d85939552bAndrew Geissler1-1/+1
Hao Jiang (1): Bug fix: wrong cmake external project cmd format. Change-Id: I88eae46dde4153ede83623a2897aacb03157b781 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-16pfr-manager: srcrev bump 8292dc60ef..29b4779eb8Andrew Geissler1-1/+1
Chalapathi Venkataramashetty (3): pfr-manager: Get i2cBusNumber and i2cSlaveAddress from EntityManager. pfr-manager: Read and update last event counts in dbus pfr-manager: stop pfr-manager service if PFR not supported Change-Id: I0269965ea7553fa44907ce2df81dff5e77cb6b5a Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2021-06-16meta-google: recipes-phosphor: host: Import from gBMCBrandon Kim1-0/+7
Initial recipes-phosphor/host code from gBMC. Google-Bug-Id: 179618560 Upstream: 1182879e906e67ca171b21c1eaa4027f9d162e49 Signed-off-by: Brandon Kim <brandonkim@google.com> Change-Id: I9a9baa0528ce4dfc33437a1e9ae908ce22dc6d16
2021-06-16bytedance: g220a: Remove customized layoutLei YU1-3/+0
The upstream has defined the 64MiB layout, use the upstream one. Tested: Verify g220a's image boots fine in QEMU. Signed-off-by: Lei YU <yulei.sh@bytedance.com> Change-Id: Id69df5796c11f1d86bc1340fdb7127f0eb3f3e18
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-12 01:33:55 +0300