| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
By replacing phosphor-hwmon by dbus-sensor, PSU presence detection via
GPIO does not work anymore and it causes confiction with dbus-sensor's
PSUSensor.
Revert the commit to avoid the confliction
Change-Id: Idfd54325c122921a3c5df062bce1b6909b643999
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
|
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Every machine layer treats 'system-management' as either part of a
package-group or removes the feature. The sample implementation in
meta-phosphor is a do-nothing shell script (and up until recently was a
Python script). There appears to be no useful purpose to this feature
as a stand-alone concept, so remove it.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20ca1fa8ff3cb01cac2d07d4ded84e0769e4514b
|
|
Enable support for smbios-mdr using IPMI BLOB transport protocol,
and disable the cpuinfo feature.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I0ed7ff78ba3910ab60018e0b8f55b14a22fcbb2a
|
|
Support a wrapper script to detect the Host firmware image by checking
the ExtendedVersion field from the MANIFEST file to flash into
the appropriate device components. The supported image type include:
- ExtendedVersion=secondary: flash to secondary Host SPI-NOR
- ExtendedVersion=scp-primary: flash to primary Boot EEPROM
- ExtendedVersion=scp-secondary: flash to alternative Boot EEPROM
- ExtendedVersion=fru: write to the FRU EEPROM.
Tested:
1. Flash UEFI firmware into the primary Host SPI-NOR via WebUI
2. Flash UEFI firmware into the secondary Host SPI-NOR via WebUI
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I7dff2ca0f8b9de85c2cbac1a49d04b6e14721a03
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
It checks GPIO key for powersupply presence, and creates
the inventory object.
Tested:
1. Plug the PSU, check busctl command for Present attribute
2. Plug out the PSU, check busctl command for Present attribute
$ busctl --no-pager introspect xyz.openbmc_project.Inventory.Manager
/xyz/openbmc_project/inventory/system/chassis/motherboard/powersupply0
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I4520d537d425249debe5c0d8c6bf8b0f6e3c5b34
|
|
Enable system event log for Redfish. It includes the setting to:
- Enable sel-logger module which logs the sensor event into the
systemd log.
- Enable the rsyslog (intel module) to sync the sensor events from
systemd to /var/log/redfish. The file will be used by Redfish.
- Configure the backend and redfish to get the system log from the
/var/log/redfish instead of system d-bus
- Enable Redfish journal log
Tested: Verify event logs appear in:
1. Redfish: /redfish/v1/Systems/system/LogServices/EventLog/Entries
2. Redfish: /redfish/v1/Managers/bmc/LogServices/Journal/Entries
3. WebUI: /server-health/sys-log at Event type.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I3753e2932ec1dc83cdbe0708173531930df65254
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
|
Implement the Ampere power control requirements for Altra system.
Tested:
- Check the ipmi commands: ipmi power on/off/soft/reset/cycle
- Check the redfish commands: On, Off, ForceOn, ForceOff,
GracefulShutdown, GracefulRestart, ForceRestart, PowerCycle
Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com>
Change-Id: Id0c64c1284a6338ce47ca720d0ef75e99d21aa3c
|
