| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The patch to support flashcp offset parameter is fail to apply because
of new mtd-utils revision. This commit updates the patch to resolve the
compilation warning on apply failure.
Tested:
1. Compile Mt.Jade OpenBMC without warning about mtd-utils.
2. Flash EDKII firmware using ampere_flash_bios.sh and check Host boots
successfully.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I9026ac5bafc07ee5eff7efdf7890d0eef2161c52
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
UEFI firmware for Ampere Altra-based platform starts at offset 0x400000
but currently the firmware image is flashed start at offset 0. This
makes the Host fail to boot.
This commit supports offset option for the mtd-util's flashcp utility
and update the script to flash UEFI firmware starting at offset
0x400000.
Tested:
1. Turn on the Host.
2. Flash UEFI firmware. Wait for the flash complete and check if Host
can boot successfully.
4. Turn off the Host.
5. Flash UEFI firmware. Wait for the flash complete.
6. Turn on the Host and check if Host can boot successfully.
Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I0d48bfd0a7b7350b46a98bf10fe4de3887f09f02
|
