| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix all issues from the shellcheck checked on bash shells under
meta-ampere.
Tested: Verify the following features:
1. Power control (on,off, cycle, graceful shutdown, hard reset).
2. UART switching.
3. UEFI firmware update.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Idabf839b7521ecadb642230cc8bb3472c787002e
|
|
There are some redundant codes inside meta-mtjade:
- ampere-reset-host-check@.service: no longer be used.
- redundant :mtjade in phosphor-software-manager_%.bbappend
- Incorrect GPIO function call in ampere_platform_init.sh
This commit fixes the above issues.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iadde88ba6472815556a2c0839c1e3e127c2a04d4
|
|
Support a wrapper script to detect the Host firmware image by checking
the ExtendedVersion field from the MANIFEST file to flash into
the appropriate device components. The supported image type include:
- ExtendedVersion=secondary: flash to secondary Host SPI-NOR
- ExtendedVersion=scp-primary: flash to primary Boot EEPROM
- ExtendedVersion=scp-secondary: flash to alternative Boot EEPROM
- ExtendedVersion=fru: write to the FRU EEPROM.
Tested:
1. Flash UEFI firmware into the primary Host SPI-NOR via WebUI
2. Flash UEFI firmware into the secondary Host SPI-NOR via WebUI
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I7dff2ca0f8b9de85c2cbac1a49d04b6e14721a03
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
