Age | Commit message (Collapse) | Author | Files | Lines |
|
There are some redundant codes inside meta-mtjade:
- ampere-reset-host-check@.service: no longer be used.
- redundant :mtjade in phosphor-software-manager_%.bbappend
- Incorrect GPIO function call in ampere_platform_init.sh
This commit fixes the above issues.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iadde88ba6472815556a2c0839c1e3e127c2a04d4
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
Make the following changes to fix compilation errors:
1. Add honister to LAYERSERIES_COMPAT
2. Increase CONF_VERSION to 2.
3. Fix mistake on previous change on Yocto syntax update.
Tested:
1. Compile OpenBMC for Mt.Jade without error.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I5ac3f568d776109955759fab78844b1d38a51af1
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
When BMC boots, phosphor-host-check uses the software interfaces(IPMI
inband Hearbeat command or PLDM interface) to verify the host state
and creates the host on indicator file. Ampere Altra SoCs do not
support those software interfaces. They use the GPIO interface. GPIO
pin S0_FW_BOOT_OK go high when the host is on. This commit appends
ampere-reset-host-check@.service to phosphor-state-manager This
service will replaces the role of phosphor-reset-host-check@.service.
Tested:
1. Boot up BMC with the host is off/on.
2. Verify the CurrentHostState.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ie4f73538266fff7d8c5fd40b437ffebc82cb12c5
|
|
Refactor the Mt.Jade Host power control operations to support Altra
CPU following the Altra SoC BMC Interface specification which still
satisfying the OpenBMC power control framework.
Tested: check the below cases and ensure Host state report correctly:
1. Run "reboot" from Host Linux. Check the Host is graceful
shutdown, then SYS_RESET is asserted and the Host is booted.
2. Run "shutdown" from Host Linux. Check the Host is graceful
shutdown then the chassis power is turned OFF.
3. Run "ipmitool chassis power soft". Check the Host is graceful
shutdown
4. Execute Redfish GracefulShutdown. Check the Host is graceful
shutdown then the chassis power is turned OFF.
5. Execute Redfish GracefulRestart. Check the Host is graceful
shutdown then turned ON.
6. Check other IPMI chassis power and Redfish Reset actions work.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: I3a9716f37d7e80bdc1a1d0422e561c8fc51ad040
|
|
The current ampere-hostctl package removes the power off/on services
of phosphor-state-manager and uses Ampere services. This solution is
not correct. Ampere platform should use power control functions of
phosphor-state-manager. And only appends or overides the default
services by Ampere's services if need.
By default, to handle power soft action, phosphor-state-manager will
trigger obmc-host-shutdown@0.target. This target then call
xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service to request OS
shutdown. When the host OS shutdown is already done, the target will
trigger obmc-chassis-poweroff@0.target to turn off the chassis. The
default xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service uses
Ipmi inband to communicate with the host. It is different with Ampere
Mt.Jade platform. We use the GPIO pin SHD_REQ to request shutdown the
host OS. The host will trigger SHD_ACK when shutdown is done. So
*.Ipmi.Internal.SoftPowerOff.service will be overide by Ampere service
named ampere.*.Ipmi.Internal.SoftPowerOff.service. This service will
trigger SHD_REQ pin and wait for SHD_ACK before start
obmc-chassis-poweroff@0.target.
This commit removes ampere-chassis-poweroff, ampere-host-shutdown
serives which handle power off/soft actions and restore
phosphor-state-manager's services. It also supports
ampere.xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service which
will overide xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service.
Tested:
1. Create "power soft" actions use ipmitool, redfish and BMC web.
2. Make sure the power order will be shutdown the host then power
of the chassis.
3. Create "power off" actions use ipmitool, redfish and BMC web.
4. Make sure the power action will be power off the chassis.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ibc0dc8c62408e8282520c9b70e41ab75c10137f6
|
|
Implement the Ampere power control requirements for Altra system.
Tested:
- Check the ipmi commands: ipmi power on/off/soft/reset/cycle
- Check the redfish commands: On, Off, ForceOn, ForceOff,
GracefulShutdown, GracefulRestart, ForceRestart, PowerCycle
Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com>
Change-Id: Id0c64c1284a6338ce47ca720d0ef75e99d21aa3c
|