Age | Commit message (Collapse) | Author | Files | Lines |
|
Change to implement virtual USB Ethernet using phosphor-misc's usb-ctrl.
Tested:
1. Boot BMC to Linux. Login and check if usb0 ethernet interface exists.
2. Power ON the Host. Check if usb0 automatically sets its IP to
192.168.0.10
3. Restart the ampere-usbnet.service service. Check if no error happens.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I4de722a691a112db851b6dda0a7821b9f78b4d72
|
|
Fix all issues from the shellcheck checked on bash shells under
meta-ampere.
Tested: Verify the following features:
1. Power control (on,off, cycle, graceful shutdown, hard reset).
2. UART switching.
3. UEFI firmware update.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Idabf839b7521ecadb642230cc8bb3472c787002e
|
|
Manojkiran Eda (1):
Add OWNERS file
Change-Id: I60701ca35fc2027fa31db97029d846f9efacc31c
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Adds the ampere-ipmi-oem.bb file to support ampere-ipmi-oem features.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I869a3e73573dd43103b52640ef3ac2d1912280dc
|
|
There are some redundant codes inside meta-mtjade:
- ampere-reset-host-check@.service: no longer be used.
- redundant :mtjade in phosphor-software-manager_%.bbappend
- Incorrect GPIO function call in ampere_platform_init.sh
This commit fixes the above issues.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iadde88ba6472815556a2c0839c1e3e127c2a04d4
|
|
Enable support for smbios-mdr using IPMI BLOB transport protocol,
and disable the cpuinfo feature.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I0ed7ff78ba3910ab60018e0b8f55b14a22fcbb2a
|
|
Support a wrapper script to detect the Host firmware image by checking
the ExtendedVersion field from the MANIFEST file to flash into
the appropriate device components. The supported image type include:
- ExtendedVersion=secondary: flash to secondary Host SPI-NOR
- ExtendedVersion=scp-primary: flash to primary Boot EEPROM
- ExtendedVersion=scp-secondary: flash to alternative Boot EEPROM
- ExtendedVersion=fru: write to the FRU EEPROM.
Tested:
1. Flash UEFI firmware into the primary Host SPI-NOR via WebUI
2. Flash UEFI firmware into the secondary Host SPI-NOR via WebUI
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I7dff2ca0f8b9de85c2cbac1a49d04b6e14721a03
|
|
Disable this option to does not support TFTP firmware update as it is
an unsecured protocol.
Tested:
1. On Webui, Configuration -> Firmware. No more option TFTP server on
Update firmware.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I8cb3285154b62ac2ee026485ad3f1d9d9586a016
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
Make the following changes to fix compilation errors:
1. Add honister to LAYERSERIES_COMPAT
2. Increase CONF_VERSION to 2.
3. Fix mistake on previous change on Yocto syntax update.
Tested:
1. Compile OpenBMC for Mt.Jade without error.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I5ac3f568d776109955759fab78844b1d38a51af1
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
When BMC boots, phosphor-host-check uses the software interfaces(IPMI
inband Hearbeat command or PLDM interface) to verify the host state
and creates the host on indicator file. Ampere Altra SoCs do not
support those software interfaces. They use the GPIO interface. GPIO
pin S0_FW_BOOT_OK go high when the host is on. This commit appends
ampere-reset-host-check@.service to phosphor-state-manager This
service will replaces the role of phosphor-reset-host-check@.service.
Tested:
1. Boot up BMC with the host is off/on.
2. Verify the CurrentHostState.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ie4f73538266fff7d8c5fd40b437ffebc82cb12c5
|
|
Refactor the Mt.Jade Host power control operations to support Altra
CPU following the Altra SoC BMC Interface specification which still
satisfying the OpenBMC power control framework.
Tested: check the below cases and ensure Host state report correctly:
1. Run "reboot" from Host Linux. Check the Host is graceful
shutdown, then SYS_RESET is asserted and the Host is booted.
2. Run "shutdown" from Host Linux. Check the Host is graceful
shutdown then the chassis power is turned OFF.
3. Run "ipmitool chassis power soft". Check the Host is graceful
shutdown
4. Execute Redfish GracefulShutdown. Check the Host is graceful
shutdown then the chassis power is turned OFF.
5. Execute Redfish GracefulRestart. Check the Host is graceful
shutdown then turned ON.
6. Check other IPMI chassis power and Redfish Reset actions work.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: I3a9716f37d7e80bdc1a1d0422e561c8fc51ad040
|
|
The current ampere-hostctl package removes the power off/on services
of phosphor-state-manager and uses Ampere services. This solution is
not correct. Ampere platform should use power control functions of
phosphor-state-manager. And only appends or overides the default
services by Ampere's services if need.
By default, to handle power soft action, phosphor-state-manager will
trigger obmc-host-shutdown@0.target. This target then call
xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service to request OS
shutdown. When the host OS shutdown is already done, the target will
trigger obmc-chassis-poweroff@0.target to turn off the chassis. The
default xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service uses
Ipmi inband to communicate with the host. It is different with Ampere
Mt.Jade platform. We use the GPIO pin SHD_REQ to request shutdown the
host OS. The host will trigger SHD_ACK when shutdown is done. So
*.Ipmi.Internal.SoftPowerOff.service will be overide by Ampere service
named ampere.*.Ipmi.Internal.SoftPowerOff.service. This service will
trigger SHD_REQ pin and wait for SHD_ACK before start
obmc-chassis-poweroff@0.target.
This commit removes ampere-chassis-poweroff, ampere-host-shutdown
serives which handle power off/soft actions and restore
phosphor-state-manager's services. It also supports
ampere.xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service which
will overide xyz.openbmc_project.Ipmi.Internal.SoftPowerOff.service.
Tested:
1. Create "power soft" actions use ipmitool, redfish and BMC web.
2. Make sure the power order will be shutdown the host then power
of the chassis.
3. Create "power off" actions use ipmitool, redfish and BMC web.
4. Make sure the power action will be power off the chassis.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ibc0dc8c62408e8282520c9b70e41ab75c10137f6
|
|
This makes it possible for us to change out build specific settings.
Change-Id: I862366d8efa97c4c3181b842662bf28dd5bec270
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
The SpeedMbds of ethernet interface is implemented in getInterfaceInfo()
from the phosphor-networkd repo. It is disabled by NIC_SUPPORTS_ETHTOOL
conditional compilation. The default compile mode is to omit the
getInterfaceInfo() which causes the SpeedMbps not set.
This commit supports enable the NIC_SUPPORTS_ETHTOOL to report correct
speed.
Tested:
1.Get SpeedMbps via rest:
$ curl -XGET --user root:0penBmc -H "Content-Type: application/json" \
-H "If-match: *" --insecure \
https://10.38.14.2/redfish/v1/Managers/bmc/EthernetInterfaces/eth1 \
grep | "SpeedMbps"
2.Get speed of eth1 interface on BMC console
$ cat /sys/class/net/eth1/speed
The value getting from openbmc#1 and openbmc#2 match together.
Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com>
Change-Id: I57047151fc4eea08c857b95c0770d89ba95f9bc7
|
|
Enable system event log for Redfish. It includes the setting to:
- Enable sel-logger module which logs the sensor event into the
systemd log.
- Enable the rsyslog (intel module) to sync the sensor events from
systemd to /var/log/redfish. The file will be used by Redfish.
- Configure the backend and redfish to get the system log from the
/var/log/redfish instead of system d-bus
- Enable Redfish journal log
Tested: Verify event logs appear in:
1. Redfish: /redfish/v1/Systems/system/LogServices/EventLog/Entries
2. Redfish: /redfish/v1/Managers/bmc/LogServices/Journal/Entries
3. WebUI: /server-health/sys-log at Event type.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I3753e2932ec1dc83cdbe0708173531930df65254
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
|
Implement the Ampere power control requirements for Altra system.
Tested:
- Check the ipmi commands: ipmi power on/off/soft/reset/cycle
- Check the redfish commands: On, Off, ForceOn, ForceOff,
GracefulShutdown, GracefulRestart, ForceRestart, PowerCycle
Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com>
Change-Id: Id0c64c1284a6338ce47ca720d0ef75e99d21aa3c
|