| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Latest upstream yocto has moved on to the 3.3 hardknott release
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ieae36798d66d21c2c642931f06407d3bb2acf163
|
|
This layer provides libseccomp.
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
|
|
Add initial LED YAML and related files for Mt. Jade LED support.
Tested: Check power LED ON during BMC boot.
Signed-off-by: Hieu Cong Huynh <hieu.huynh@amperecomputing.com>
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I8c39a2b9c61366d588afd4847833ceb19f24a390
|
|
Support to get BMC MAC address from FRU over the FRU inventory
information (/xyz/openbmc_project/inventory/system/chassis/motherboard)
and update to the eth0 Ethernet interface and set the eth1addr u-boot
variable.
Tested:
1. Boot to u-boot, clear the eth1addr variable, save and reboot.
2. Boot to Linux:
- Check if the eth0 interface uses the MAC address in FRU.
root@mtjade:~# ip addr show dev eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 70:e2:84:86:76:ba brd ff:ff:ff:ff:ff:ff
- Check if the eth1addr u-boot variable uses the MAC address in FRU
root@mtjade:~# fw_printenv eth1addr
eth1addr=70:E2:84:86:76:BA
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ifb7eefbb17257545d026005f859d37ef562289b7
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
|
Implement systemd service to create an Ethernet over USB interface
for communication between CPU and BMC.
Tested:
1. Check usb0 ethernet interface in BMC console
root@mtjade:~# ifconfig usb0
usb0 Link encap:Ethernet HWaddr DA:F7:E9:A3:5A:0C
inet addr:192.168.0.10 Bcast:192.168.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:412 (412.0 B)
2. Check USB Ethernet device on Host Linux
$ lsusb | grep Ethernet
Bus 001 Device 004: ID 1d6b:0103 Linux Foundation NCM (Ethernet) Gadget
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Icb7c096df426233e8f2ee7318f2a1805f07ab3a7
|
|
Add initial Mt.Jade platform support with minimal configuration so that
the code can be compiled and booted on the Mt.Jade platform system.
Tested:
1. Compile OpenBMC image for Mt.Jade successfully and can boot on
Mt.Jade.
2. Login to console and WebUI successfully.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ib4c2c30be7fc0a13cc66f7eb1c8b9604e9a5292f
|
