| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The power functions are failed to work. There is one mistake in
merging ampere_power_utils.sh script. This commit fixes the mistake.
Tested:
1. Power off the host when it is on.
2. The host state should be changed to off.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Iaa253e4b8d0f645a2b7097501e8c602d693cb37a
|
|
When phosphor-state-manager handles the power action to turn on the
host, phosphor-state-manager does not use the software interfaces to
verify the host state. It set the host state to running after all of
required services of the power action target are done. The power on
watchdog is used to verify the host state and handle the failure in
the host state changing. But Mt.Jade platforms do not handle power on
watchdog. This causes the CurrentHostState dbus property is Running
before the host is ready.
In Mt.Jade platform, the SCP drives S0_FW_BOOT_OK to high when the
host is already on. This GPIO can be used to identify the host state.
One service should be added to the required list. This service checks
the host state in power on and triggers obmc-host-quiesce@%i.target
when the host is failed to boot. ampere-host-check package adds
ampere-host-on-host-check@.service for that purpose.
Tested:
1. Boot up BMC with the host is off/on. Check CurrentHostState.
2. Call Ipmitool power off/on. Check the CurrentHostState.
3. Call Ipmitool chassis power off/on. Check the CurrentHostState.
4. Call Ipmitool power cycle. Check the CurrentHostState.
5. Call Ipmitool chassis power cycle. Check the CurrentHostState.
6. Power off the host. Set power policty to Always-on. AC power.
The host should be on. And CurrentHostState should be Running.
7. Power on the host. Set power policty to Always-off. AC power.
The host should be off. And CurrentHostState should be Off.
Change-Id: I9b0b346883a5f0203bf078453065c18ae4603311
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
|
|
ampere-hostctrl package includes the generic codes and the platform
specific codes. The generic sources are applied for all of the Ampere
platforms, they are the service files and the scripts to setting the
GPIO pins. The platform specific sources are the GPIO pin config file
and the gpio monitor config files.
This commit moves the platform specific files to the platform code.
Tested:
1. Do the power control actions use ipmitool, BMC web and Redfish.
2. Make sure the server states are changed as expected.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ic0e261109f7a5dfaf38c883bff0afedab763a0b6
|
|
UEFI firmware for Ampere Altra-based platform starts at offset 0x400000
but currently the firmware image is flashed start at offset 0. This
makes the Host fail to boot.
This commit supports offset option for the mtd-util's flashcp utility
and update the script to flash UEFI firmware starting at offset
0x400000.
Tested:
1. Turn on the Host.
2. Flash UEFI firmware. Wait for the flash complete and check if Host
can boot successfully.
4. Turn off the Host.
5. Flash UEFI firmware. Wait for the flash complete.
6. Turn on the Host and check if Host can boot successfully.
Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I0d48bfd0a7b7350b46a98bf10fe4de3887f09f02
|
|
Enable flash_bios feature and configure to use backend script to flash
UEFI firmware via Redfish, WebUI and Rest.
Tested:
1. Flash UEFI firmware via WebUI.
2. Flash UEFI firmware via Redfish UpdateService
3. Flash UEFI firmware via Rest interface.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
|
