Age | Commit message (Collapse) | Author | Files | Lines |
|
Disable phosphor-hwmon from compilation and clean up sensor inventory
which added before for phosphor-hwmon.
Tested:
1. Check if no phosphor-hwmon compiled and run
2. Check all S0 and S1 ADC sensors are still available in Redfish.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ic6ac13963e755e6ef0d93b3f6486546c61b1abe0
|
|
Change to implement virtual USB Ethernet using phosphor-misc's usb-ctrl.
Tested:
1. Boot BMC to Linux. Login and check if usb0 ethernet interface exists.
2. Power ON the Host. Check if usb0 automatically sets its IP to
192.168.0.10
3. Restart the ampere-usbnet.service service. Check if no error happens.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I4de722a691a112db851b6dda0a7821b9f78b4d72
|
|
The ampere_update_mac service gets BMC MAC Address from FruDevice but
currently uses Inventory.Manager as its dependency. This makes the
service sometime not work correctly.
This commit updates the dependency to EntityManager to fix the issue
Tested:
1. Clear eth1addr variable. Do A/C power the BMC and ensure the BMC MAC
is set to eth1addr
2. Clear eth1addr variable. Reboot BMC and ensure the BMC MAC is set to eth1addr
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I00c78222d487c72db5e6e06f8cc8b45cfde2f253
|
|
Run convert-overrides.py meta-ampere and update missing changes as
below:
- Change all _mtjade to :mtjade
- Change all _${PN} to :${PN}
Tested:
1. Check compilation without problem.
2. Check basic functions like switch UART mux, power control.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I42038b2a98ed1951d6c770bdf49f5fc440f8163e
|
|
ampere-hostctrl package includes the generic codes and the platform
specific codes. The generic sources are applied for all of the Ampere
platforms, they are the service files and the scripts to setting the
GPIO pins. The platform specific sources are the GPIO pin config file
and the gpio monitor config files.
This commit moves the platform specific files to the platform code.
Tested:
1. Do the power control actions use ipmitool, BMC web and Redfish.
2. Make sure the server states are changed as expected.
Signed-off-by: ThuBaNguyen <thu@os.amperecomputing.com>
Change-Id: Ic0e261109f7a5dfaf38c883bff0afedab763a0b6
|
|
Add total_power sensor calculated by sum of PSU0_POUTPUT and
PSU1_POUTPUT.
Tested:
1. Check if total_power is present in WebUI and Redfish and its value is
sum of PSU0_POUTPUT and PSU1_POUTPUT.
2. Check total_power from IPMI
root@mtjade:~# ipmitool sdr list | grep total_power
total_power | 648 Watts | ok
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: I304e7c9328f1f91f6f358f0e8472a107bf5479a0
|
|
When system only uses single PSU ( ex : PSU1 ) to power ON normal 12V,
HSC2 will be trigged Fault event (FET health).
At this time, plugging in PSU2 in system, the PSU2 won't deliver power to
+12V_MB because HSC2 is protected by Fault event.
Due to HSC2 protected, the PSU redundancy mechanism can't be created.
Once PSU1 is plugged out at this moment, system will crash ( reset )
because +12V_MB dropped.
Support detecting PSU plug event and reset the Hot-Swap feature by
disabling and then enabling again it through PMBUS command to clear the
event.
Tested:
1. Plug only PSU1 to power ON system (12V)
2. Wait until host is booted, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 112 Watts | ok
PSU2_POUT | 0 Watts | ok
3. Plug in PSU2 in system, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 64 Watts | ok
PSU2_POUT | 48 Watts | ok
4. Unplug AC power PSU1, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 0 Watts | ok
PSU2_POUT | 128 Watts | ok
5. Plug in AC power PSU1, check POUT:
$ ipmitool sdr | grep "POUT"
PSU1_POUT | 80 Watts | ok
PSU2_POUT | 64 Watts | ok
6. Repeat 1. to 5. with PSU2.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: Ia6e00cd7b08de48059f2450e7eaf108418d0a026
|
|
Since the webui-vue repo has become a web standard, enabled webui-vue
repo and removed phosphor-webui repo.
Tested: build mtjade and login to WebUI successfully
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ib4a3902ca8170275570b2f6b79b3ecebb8ffccde
|
|
The UID button is used to provide visual identification of the system
when pushed. Pressing the UID button toggles the UID LED. The same
action can be done via Redfish (by patching IndicatorLED from
redfish/v1/Systems/system) or the IPMI chassis identify command.
Tested:
1. Press the UID button to toggles the UID on/off
2. Turn on the UID LED via ipmi command
$ ipmitool chassis identify
3. Turn Lit/Blinking/Off UID LED via Redfish then check the IndicatorLED
values
$ curl -X PATCH --user root:0penBmc -H "Content-Type: application/json" \
-H "If-Match: *" --insecure https://BMC_IP/redfish/v1/Systems/system \
-d '{"IndicatorLED": "Lit/Blinking/Off"}'
$curl -X GET --user root:0penBmc -H "Content-Type: application/json" \
--insecure https://BMC_IP/redfish/v1/Systems/system
The IndicatorLED is "Lit/Blinking/Off"
Signed-off-by: Hieu Huynh <hieu.huynh@amperecomputing.com>
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I58eeae7ac22a9d4ddd4acdfbd167095bdc74072c
|
|
Monitor the Socket 0 and Socket 1's CPU_FAULT GPIO and turn on the Fault
LED when any GPIO turns ON.
Tested:
1. Flash special SCP image to stimulate CPU Fault LED
2. Check if the Fault LED is ON.
Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com>
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Change-Id: I73bf34b4361528c9c8825942ddc7f24d51589189
|
|
Add initial Mt.Jade platform support with minimal configuration so that
the code can be compiled and booted on the Mt.Jade platform system.
Tested:
1. Compile OpenBMC image for Mt.Jade successfully and can boot on
Mt.Jade.
2. Login to console and WebUI successfully.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Ib4c2c30be7fc0a13cc66f7eb1c8b9604e9a5292f
|