summaryrefslogtreecommitdiff
path: root/meta-ampere
AgeCommit message (Collapse)AuthorFilesLines
2021-04-22build phosphor-hwmon with mesonMatt Spinler1-1/+1
The repository supports it, so switch it over in bitbake. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I8d96c79b395ee2614ddd869091569f245426c5c7
2021-04-19meta-ampere: webui: switch to use webui-vueThang Q. Nguyen1-1/+1
Since the webui-vue repo has become a web standard, enabled webui-vue repo and removed phosphor-webui repo. Tested: build mtjade and login to WebUI successfully Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Ib4a3902ca8170275570b2f6b79b3ecebb8ffccde
2021-04-06hardknott: yocto releaseAndrew Geissler2-2/+2
Latest upstream yocto has moved on to the 3.3 hardknott release Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Ieae36798d66d21c2c642931f06407d3bb2acf163
2021-03-22openbmc: add meta-security layerAnton D. Kachalov1-0/+2
This layer provides libseccomp. Signed-off-by: Anton D. Kachalov <gmouse@google.com> Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
2021-03-18meta-ampere:u-boot: Add GPIO configuration for DVT boardsChanh Nguyen2-0/+176
Mt.Jade DVT hardware requires some GPIO setting so that the board can work well. This commit updates platform init function in u-boot to set required GPIO pins. Tested: 1. Verify below GPIOs set as input in Linux: - S0_I2C9_ALERT_L (GPIOM4) - S1_I2C9_ALERT_L (GPIOM5) - GPIO_BMC_VGA_FRONT_PRES_L (GPIOQ7) - GPIO_BMC_EXT_HIGHTEMP_L - GPIO_S0_VRHOT_L - GPIO_S1_VRHOT_L - GPIO_BMC_PCA9554_INT_L 2. verify below GPIOs set as output high in Linux - GPIO_BMC_I2C6_RESET_L - GPIO_BMC_JTAG_SRST_L - GPIO_BMC_VR_PMBUS_SEL_L - BMC_GPIOR2_EXT_HIGHTEMP_L - BMC_VGA_SEL Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I8b76387ec05c546c34c89f6f5881da3b7955a805
2021-03-10meta-ampere:u-boot: Enable SPI master mode by defaultChanh Nguyen2-0/+34
The Mt.Jade board designs pin strap, which is shared with an OCP pin. This causes the pin strap to have the wrong value if the OCP adapter is plugged and the system is off which consequently disables the SPI master mode. This makes OpenBMC fail to probe the Host SPI Flash. Change to set SPI master mode enabled by default, not base on the pin strap value, so Host SPI NOR can always be probed. Tested: 1. Plug Mellanox OCP card into the OCP1 header. 2. Do AC power board and check if SPI Flash driver can probe without error like "aspeed-smc 1e630000.spi: Error applying setting, reverse things back" Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: Ie36557d8e1580f8a6b59b24ac47557d59af653c5
2021-03-09meta-ampere:mtjade:u-boot: Add GPIO supportChanh Nguyen2-0/+519
This is an initial support for the parallel GPIO pins directly connected to the AHB on the Aspeed 2400/2500. This brings the functions and a shell command to manipulate the GPIO state. The GPIO value reading and writing work in non interrupt mode only. This is back ported from the patch file from meta-yadro/meta-nicole/recipes-bsp/u-boot/files/0003-aspeed-add-gpio-support.patch to support GPIO configuration Signed-off-by: Alexander Filippov <a.filippov@yadro.com> Signed-off-by: Thang Q. Nguyen <thangqn@amperecomputing.com> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I2d97c0fbb9f80bd6c262f03302775936f732b1f1
2021-02-26meta-ampere: Support UID button and LEDChanh Nguyen6-1/+102
The UID button is used to provide visual identification of the system when pushed. Pressing the UID button toggles the UID LED. The same action can be done via Redfish (by patching IndicatorLED from redfish/v1/Systems/system) or the IPMI chassis identify command. Tested: 1. Press the UID button to toggles the UID on/off 2. Turn on the UID LED via ipmi command $ ipmitool chassis identify 3. Turn Lit/Blinking/Off UID LED via Redfish then check the IndicatorLED values $ curl -X PATCH --user root:0penBmc -H "Content-Type: application/json" \ -H "If-Match: *" --insecure https://BMC_IP/redfish/v1/Systems/system \ -d '{"IndicatorLED": "Lit/Blinking/Off"}' $curl -X GET --user root:0penBmc -H "Content-Type: application/json" \ --insecure https://BMC_IP/redfish/v1/Systems/system The IndicatorLED is "Lit/Blinking/Off" Signed-off-by: Hieu Huynh <hieu.huynh@amperecomputing.com> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I58eeae7ac22a9d4ddd4acdfbd167095bdc74072c
2021-02-25meta-ampere: Support Fault LEDChanh Nguyen7-0/+96
Monitor the Socket 0 and Socket 1's CPU_FAULT GPIO and turn on the Fault LED when any GPIO turns ON. Tested: 1. Flash special SCP image to stimulate CPU Fault LED 2. Check if the Fault LED is ON. Signed-off-by: Tung Nguyen <tung.nguyen@amperecomputing.com> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I73bf34b4361528c9c8825942ddc7f24d51589189
2021-02-25meta-ampere: Add initial LED manager configurationChanh Nguyen3-0/+33
Add initial LED YAML and related files for Mt. Jade LED support. Tested: Check power LED ON during BMC boot. Signed-off-by: Hieu Cong Huynh <hieu.huynh@amperecomputing.com> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Change-Id: I8c39a2b9c61366d588afd4847833ceb19f24a390
2021-02-09meta-ampere: Set BMC MAC Address from FRU inventoryThang Q. Nguyen4-0/+82
Support to get BMC MAC address from FRU over the FRU inventory information (/xyz/openbmc_project/inventory/system/chassis/motherboard) and update to the eth0 Ethernet interface and set the eth1addr u-boot variable. Tested: 1. Boot to u-boot, clear the eth1addr variable, save and reboot. 2. Boot to Linux: - Check if the eth0 interface uses the MAC address in FRU. root@mtjade:~# ip addr show dev eth0 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 70:e2:84:86:76:ba brd ff:ff:ff:ff:ff:ff - Check if the eth1addr u-boot variable uses the MAC address in FRU root@mtjade:~# fw_printenv eth1addr eth1addr=70:E2:84:86:76:BA Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Ifb7eefbb17257545d026005f859d37ef562289b7
2021-02-09meta-ampere: mtjade: support FRU inventoryThang Q. Nguyen6-0/+177
Support to parse the Mt.Jade FRU device, map FRU data with inventory information and report FRU content via IPMI. Tested: 1. Run IPMI fru print command: root@mtjade:~# ipmitool fru print FRU Device Description : Builtin FRU Device (ID 0) Chassis Type : Rack Mount Chassis Chassis Serial : A1A1-A000-0000000000123 Board Mfg Date : Fri Feb 5 00:00:00 2021 UTC Board Mfg : WIWYNN Board Product : Mt.Jade Motherboard Board Serial : B8103010002500900019J0LB Board Part Number : B81.03010.0026 Product Manufacturer : WIWYNN Product Name : Mt.Jade Server System Product Part Number : B81.03001.0009 Product Version : EVT2 Product Serial : B810300100050130002DN0SD 2. Check FRU inventory reoirt from REST /xyz/openbmc_project/inventory/system/chassis/motherboard Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I231d5766b2f89a535d850eb437d63a9db84fb846
2021-02-01Change Owners Plugin in meta-ampereEd Tanous1-2/+2
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379 for details about why this is necessary. Some commits pointed out that we should identify by email instead of name. This commit changes the existing owners to use email instead of name. Signed-off-by: Ed Tanous <ed@tanous.net> Change-Id: I9b22333bd878df7d94999366bb3887e4637698f2
2021-02-01meta-ampere: support Redfish event logThang Q. Nguyen9-0/+132
Enable system event log for Redfish. It includes the setting to: - Enable sel-logger module which logs the sensor event into the systemd log. - Enable the rsyslog (intel module) to sync the sensor events from systemd to /var/log/redfish. The file will be used by Redfish. - Configure the backend and redfish to get the system log from the /var/log/redfish instead of system d-bus - Enable Redfish journal log Tested: Verify event logs appear in: 1. Redfish: /redfish/v1/Systems/system/LogServices/EventLog/Entries 2. Redfish: /redfish/v1/Managers/bmc/LogServices/Journal/Entries 3. WebUI: /server-health/sys-log at Event type. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I3753e2932ec1dc83cdbe0708173531930df65254
2021-02-01meta-ampere: mtjade: Add Host firmware update supportThang Q. Nguyen6-0/+161
Enable flash_bios feature and configure to use backend script to flash UEFI firmware via Redfish, WebUI and Rest. Tested: 1. Flash UEFI firmware via WebUI. 2. Flash UEFI firmware via Redfish UpdateService 3. Flash UEFI firmware via Rest interface. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I772e6a409414e374ed01e72e3c69985d0b413cb5
2021-02-01meta-ampere: Support solsshTung Nguyen16-0/+300
Support solssh for Mt.Jade system. It opens these ssh ports: 2200 - CPU console 2201 - SCP 0 concole 2202 - ATF console 2203 - SCP 1 console Tested: - connect to ssh ports - make sure the console are displayed correctly Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com> Change-Id: Ic0be980f201c0176ca00fd07804c101f404e707a
2021-02-01meta-ampere:mtjade:u-boot: Pass system reset status to kernel via bootargsThang Q. Nguyen2-0/+181
Backport a patch file from meta-yadro/meta-nicole/recipes-bsp/u-boot/ to add the Aspeed reset reason to bootargs so kernel so kernel application can query it. Tested: /proc/cmdline must contain: - resetreason=power after A/C power - resetreason=watchdog after bmc reboot Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I7e75cccfa0fecfa9a66572e02de0f1c8c1d519a1
2021-02-01Add Owners Plugin to meta-ampereEd Tanous1-0/+3
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379 for details about why this is necessary. Signed-off-by: Ed Tanous <ed@tanous.net> Change-Id: Ib92e7c8c335b443728754e531c5d13ca869636f8
2021-02-01meta-ampere: mtjade: Enable Redfish support for on-board sensorsThang Q. Nguyen4-0/+115
Map FAN, temperature and voltage sensors with Redfish chassis instance and enables association feature in phosphor-inventory-manager. The bmcweb looks for the sensors associated with a chassis instance in the association list. The list, which is associations.json file in phosphor-inventory-manager, maps the dbus sensor objects to a chassis inventory. Tested: 1. Check power/voltage sensors reported in redfish/v1/Chassis/chassis/Power. 2. Check FANs/thermal sensors reported in redfish/v1/Chassis/chassis/Thermal. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Ie62a1c1a4edeaf165f834f7456c26711b4b42701
2021-02-01meta-ampere: mtjade: Add on-board sensorsThang Q. Nguyen13-0/+373
Support for Mt. Jade on-board sensors including fans, battery, PSUs, voltage and temperature sensors. Tested: check sensor reading from WebUI. All on-board sensors are displayed with reasonable values. Signed-off-by: Thu Nguyen <thu@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I60abc8ae946ef95c09903ebc5d95d15db6161c1a
2021-02-01meta-ampere: remove Mt.Jade dts patchThang Q. Nguyen2-600/+0
As the Mt.Jade device tree file was picked up to openbmc/linux repository, need to remove the dts patch file to avoid conflict Tested: compile Mt.Jade OpenBMC successfully Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I518888feb64bc2b806cbae113cded4d69135611b
2021-02-01meta-ampere: ipmi: Add device ID configThang Q. Nguyen2-0/+3
Add device ID configuration for IPMI mc info command. Tested: ran command `ipmitool mc info` and got responses Device ID : 32 Device Revision : 1 Firmware Revision : 0.00 IPMI Version : 2.0 Manufacturer ID : 52538 Manufacturer Name : Unknown (0xCD3A) Product ID : 130 (0x0082) Product Name : Unknown (0x82) Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I32a1e8443b0f202cbe2133cb048d66f08e866744
2021-02-01meta-ampere: Support virtual Ethernet over USB deviceThang Q. Nguyen6-0/+153
Implement systemd service to create an Ethernet over USB interface for communication between CPU and BMC. Tested: 1. Check usb0 ethernet interface in BMC console root@mtjade:~# ifconfig usb0 usb0 Link encap:Ethernet HWaddr DA:F7:E9:A3:5A:0C inet addr:192.168.0.10 Bcast:192.168.255.255 Mask:255.255.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:412 (412.0 B) 2. Check USB Ethernet device on Host Linux $ lsusb | grep Ethernet Bus 001 Device 004: ID 1d6b:0103 Linux Foundation NCM (Ethernet) Gadget Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Icb7c096df426233e8f2ee7318f2a1805f07ab3a7
2021-02-01meta-ampere: u-boot: Disable internal PD resistors for GPIOsThang Q. Nguyen2-0/+46
Configure SCU8C - Multi-function pin control 4 to disable internal pull down resistors for GPIOJ, GPIOG/GPIOAB, GPIOD/GPIOY, GPIOC/GPIOS as external resistors are already installed. Tested: scan I2C4 and check devices on the bus are detected Signed-off-by: Thinh Pham <thinh.pham@amperecomputing.com> Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I5a4b682310b5243830bd9c7a66889b0a52c4770c
2021-02-01meta-ampere: Support Ampere power controlTung Nguyen14-0/+325
Implement the Ampere power control requirements for Altra system. Tested: - Check the ipmi commands: ipmi power on/off/soft/reset/cycle - Check the redfish commands: On, Off, ForceOn, ForceOff, GracefulShutdown, GracefulRestart, ForceRestart, PowerCycle Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com> Change-Id: Id0c64c1284a6338ce47ca720d0ef75e99d21aa3c
2021-02-01meta-ampere:mtjade:u-boot: Enable FANs to run at full speed on resetThang Q. Nguyen2-0/+92
When BMC is reseting, FANs do not run at all. This might cause heating issue in case the Host CPU is in high load. To protect the hardware, it is safe to set FANs run at full speed when BMC is booting. After it boots complete, phosphor-fan service will take control on FANs to make them work at the right speed. This commit adds patch to configure all PWM function pins to input GPIO mode to make FANs run at full speed. Tested: 1. Boot BMC to Linux. 2. Turn on Host by "ipmitool chassis power on" command 3. Reboot BMC and check if FAN speed is maximum at u-boot. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I38f1433a576a1700938347dc89eddacf3fb3bf60
2021-01-30meta-ampere:meta-jade Add skeleton configuationTung Nguyen2-0/+55
Add the Mt.Jade skeleton configuration to support the basic power control Tested: 1. Compile OpenBMC image and boot successfully on Mt.Jade 2. Check basic gpio get/set and the power control action successfully Signed-off-by: Tung Nguyen <tungnguyen@os.amperecomputing.com> Change-Id: Ifc4f5746c3fb7e8d5e30a12cf29dd3f02e5de953
2021-01-30meta-ampere: Add Mt.Jade machineThang Q. Nguyen9-0/+889
Add initial Mt.Jade platform support with minimal configuration so that the code can be compiled and booted on the Mt.Jade platform system. Tested: 1. Compile OpenBMC image for Mt.Jade successfully and can boot on Mt.Jade. 2. Login to console and WebUI successfully. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: Ib4c2c30be7fc0a13cc66f7eb1c8b9604e9a5292f
2021-01-30meta-ampere: Initial commit of Ampere ComputingThang Q. Nguyen5-0/+263
This commit adds layer configuration, license, and maintainer files for meta-ampere. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: I7fc3e08cddb1e402153c8d163576fa36d4441785
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-05 04:49:13 +0300