Age | Commit message (Collapse) | Author | Files | Lines |
|
The obmc-system-mgmt feature is currently used in the image to trigger
inclusion of a virtual-provider which provides a number of packages many
systems need. Partially revert the removal of this feature so that
the outcome is:
1. The empty obmc-phosphor-sysd package is still removed.
2. By default the 'obmc-system-mgmt' feature is included, unless
specifically exempted.
3. All EVB platforms remove the 'obmc-system-mgmt' feature since
they have no system they are managing.
This partially reverts commit 060ad3ff7fcc30aff78a9e504efee9d8fa0d4526.
Tested:
* Built `bletchley` and confirmed `packagegroup-fb-apps-system` and
`entity-manager` are present.
```
entity-manager armv7ahf-vfpv4d16 0.1+git0+6bf41588ab-r0
packagegroup-fb-apps-system all 1.0-r1
```
* Built `witherspoon` and confirmed `packagegroup-op-apps-system` and
`pdbg` are present.
```
packagegroup-op-apps-system noarch 1.0
pdbg arm1176jzs 3.3
```
* Ran `bitbake -p` on `evb-ast2600` to confirm the undefined
`virtual-obmc-system-mgmt` is not being included in the image.
Change-Id: I8b7804d5101cc84a2c57473b3f85672bf7767c67
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
|
|
Currently, machine evb-ast2600 frozed during u-boot booting.
This patchset has been tested with AST2600-A1 and AST2600-A3 EVB:
AST2600-A1:
```
U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000)
already initialized, Trying to boot from RAM
U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000)
SOC: AST2600-A1
RST: WDT1 SOC
PCI RST: #2
LPC Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII
Model: AST2600 EVB
DRAM: already initialized, 1008 MiB (capacity:1024 MiB, VGA:16 MiB), ECC off
MMC:
sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0
Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK
In: serial@1e784000
```
AST2600-A3:
```
BP0c00
U-Boot SPL 2019.04 (Jun 16 2021 - 05:59:38 +0000)
already initialized, Trying to boot from RAM
U-Boot 2019.04 (Jun 16 2021 - 05:59:38 +0000)
SOC: AST2600-A3
RST: WDT1 SOC
PCI RST: #2
eSPI Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RGMII, MAC1: RGMII, MAC2: RGMII, MAC3: RGMII
Model: AST2600 EVB
DRAM: already initialized, 960 MiB (capacity:1024 MiB, VGA:64 MiB), ECC
off
MMC:
sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0
Loading Environment from SPI Flash... SF: Detected w25q512jv with page size 256 Bytes, erase size 4 KiB, total 64 MiB OK
In: serial@1e784000
```
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Change-Id: I77ec3c2928ca96ee3f51290fd3435fca08bb058a
|
|
AST2600 evb has 64 MiB flash by default, so machine config could
provide a default value for FLASH_SIZE.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Change-Id: Idca8734f950a16966a5a7322c0c50d6e63d9106e
|
|
This is a fork that is based on ASPEED's 2019.04 SDK fork. The goal is
to move to a mainline based tree, but while that work is underway, this
allows ast2600 support to move forward.
This gains support for NC-SI, and uses kconfig for the default
boot command allowing us to drop the patch to aspeed-common.h.
Machines will need to indicate which device tree to use. If possible we
should look to having a few common device trees, but for now they are
machine specific. The AST2600 is configured to use the ast2600a1-evb
device tree, which will also work on the a0 variant.
(From meta-aspeed rev: 22ccf4648a776c458300c97a6d001a843b2b5c9b)
Change-Id: Ib21dc9962761aac3f3148fe4908439b975545e1e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Provide a default setting for SERIAL_CONSOLES for all Aspeed SOCs.
Set the SERIAL_CONSOLE for the g5 and g6 evb explicitly, in case the
default changes.
(From meta-aspeed rev: b539e873a7731bad9eee83e17838a78f281d7b4b)
Change-Id: I1ee9f44535cd009de25baccacada36cd58ad4f10
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add base configuration metadata for the Aspeed AST2600 and its
evaluation board.
Initially point at the Aspeed SDK until kernel and u-boot support is
added upstream.
(From meta-aspeed rev: 2f128068bc3b7705071868176624ef19a9000750)
Change-Id: Id8636520815a2cf98f8a801f6a2241387e4a8231
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|