Age | Commit message (Collapse) | Author | Files | Lines |
|
github.com:intel-innersource/firmware.bmc.openbmc.yocto.openbmc into update
|
|
|
|
When using 64M flash, the config of u-boot CONFIG_ENV_SIZE and
CONFIG_ENV_OFFSET is wrong. The config file fw_env.config is wrong, too.
Modify them according to the 64M flash dts file.
Before correcting these errors, when we used setenv to set environment
variables in u-boot, we could not use fw_printenv to get them. The
reverse is also the same. Because they set different offset and size.
Tested:
1. Use commands in u-boot:
setenv test value
saveenv
After BMC starts, use fw_printenv can get "test=value"
2. Use the command to change the value of "test"
fw_setenv test v
We can get "test=v" in u-boot by printenv.
Signed-off-by: zhanghaicheng <zhanghch05@inspur.com>
Change-Id: I9eccf6abe743253b6f8c344a8b8648e68ab52019
|
|
Move u-boot-aspeed-sdk to use u-boot.inc from poki instead our own. We
still need our own one for old u-boot-aspeed, so keep it as is.
Tested: Build image for AST2500-based machine with
u-boot-aspeed-sdk_2019.04, verified that it boots up and fw-utils
installed to the image properly.
Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Change-Id: Ia5fecdedc94e9550196420884a727e7d87b313d4
|
|
Joel Stanley (1):
aspeed/hace: Reset when error occurs
Change-Id: I10ec988f7b0b01aa76a4338ef095fbe80b4229ec
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
into update
|
|
Include the socsec-sign class after the conditional assignments to
ensure the values we might assign are considered by the functions of
socsec-sign.
Without this, u-boot-aspeed-sdk do_deploy logs show:
```
DEBUG: Executing python function sstate_task_prefunc
DEBUG: Python function sstate_task_prefunc finished
DEBUG: Executing shell function do_deploy
Copying u-boot-nodtb binary...
Warning: Invalid socsec signing key - SPL verified boot won't be available
```
Adjusting the location of the include gives:
```
DEBUG: Executing python function sstate_task_prefunc
DEBUG: Python function sstate_task_prefunc finished
DEBUG: Executing shell function do_deploy
Copying u-boot-nodtb binary...
check header PASS
Found PEM header at position 381
check integrity PASS
```
Change-Id: I15cac4c315a6ceaeb69b0c02ba0b7d05e54f6e15
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
This fixes some build errors we faced due to add new ast2500-based
platform.
* Allow to redefine input env file.
* Backport providing "u-boot-default-env" from u-boot.inc
* PROVIDES += "u-boot-fw-utils" is not enough, add also RPROVIDES
Last two changes allows to exclude from build modern libubootenv which
somewhy doesn't work for us.
Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Change-Id: I33f152c572f6c0b4d8b608375b252290efacd1ea
|
|
Allow configurations to override the SPL signing key if necessary, but
provide a default in case they don't. The provided key is intended a
low-security key.
Change-Id: I756271970b0a55409e40dbd06f1245ada6a3cb73
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
|
|
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I8135871ae0e3b360aff7d878f7cf04a2504f2dd0
|
|
into update
|
|
Adriana Kobylak (1):
configs: aspeed-common: Add redundant env for mmc
Troy Lee (2):
ast2600: spl: Fixes boot from RAM device
ast2600: Provide u-boot FIT image boot from RAM offset
Change-Id: I9fd8c76593d83d32504288a6405c2b4c41fdb381
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
into update
|
|
This adds the u-boot environment to the u-boot binary.
On the 2600 with mmc we currently rely on the default environment being
populated in the image. This has the downside that if something corrupts
the environment, the system won't know how to boot itself.
This wasn't a problem for NOR based systems as the built in command knew
how to boot the system (unless you were using a 'special' setup such as
Witherspoon's UBI setup).
The ast2600_openbmc_mmc.txt is copied from
meta-aspeed/recipes-bsp/u-boot/files/u-boot-env-ast2600.txt.
Adriana has indicated she will update openbmc to use the .txt from the
u-boot tree to generate the filesystem image (or we could stop doing
that, and simply use the default?).
The environment processing step requires xxd on the build system.
Joel Stanley (2):
Makefile: Conditionally add defaultenv_h to envtools target
ast2600: Add environment for booting from mmc
Change-Id: I0381ac168285bade75115b7b415e18dd7fc8694e
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add environment variables to the AST2600 to boot a certain FIT
configuration of the kernel based on the "fitconfig" environment
variable. The boot command will fall back to the default FIT config
in case all other boot attempts fail. Also fix the kernel boot
arguments in the case that boot failure occurs.
The boot sequence would be:
- boota with fitconfig, if it fails:
- boota without fitconfig, if it fails:
- bootb with fitconfig, if it fails:
- bootb without fitconfig
Tested: Set fitconfig to a dummy variable, and also changed the bootm
command to a dummy command to force a boot failure, and verified the
sequence was as expected:
ast# boot
boota
Error loading kernel FIT image with fitconfig rainier-dummy
Unknown command 'bootm-dummy' - try 'help'
Error loading kernel FIT image
bootb
Error loading kernel FIT image with fitconfig rainier-dummy
Unknown command 'bootm-dummy' - try 'help'
Error loading kernel FIT image
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Change-Id: I14cf935a707bdb95b0a6e4e607919ea0e027d18c
|
|
This rebases on the latest SDK release. Notably this release includes
support for the A3 and disables debug backdoors in line with the
defaults in the A3 silicon.
Changes kept downstream from ASPEED's SDK in the OpenBMC branch:
Eddie James (1):
ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters
Joel Stanley (15):
board: ast2600: Disable eSPI early init by default
dts: ast2600-evb: Enable FSI masters
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
ast2600: Allow selection of SPL boot devices
ast2600: Modify SPL SRAM layout
crypto: Add driver for Aspeed HACE
ast2600: Enable HACE probing in SPL
ast2600: Add HACE to device tree
ast2600: spl: Add ASPEED_LOADERS option
ast2600: spl: Support common boot loader features
config: ast2600: Add config for SPL MMC boot with FIT signature verification
Changes in the ASPEED SDK when moving from v00.03.03 include the branch
of fixes that were backported for FIT support, plus the following
changes from the ASPEED team:
Bing-Hua Wang (3):
configs: evb-ast2500-spl_defconfig: Use platform.S DDR init
ast2500: spl: Skip SPI timing calibration
ast2500: Fix VRAM size detection
Chia-Wei Wang (2):
ast2600: Disable backdoor to align A3 design
ast2600: Enable UART Debug based on FWSPIMISO
Chia-Wei, Wang (4):
board: ast2600: Add eSPI early init sequence
board: ast2600-intel: Add Intel EGS CRB support
aspeed: ast2600: Fix incorrect chip revision ID
board: ast2600: Enable eSPI early init by default
Chin-Ting Kuo (4):
sdhci: ast2600: HS200 support porting
mmc: Enable SDMA feature when boot from eMMC
uart: Fix UART1 route problem on A3
spi-nor: Porting MT25Q02G flash part
Dylan Hung (18):
cmd:aspeed: fix missing setting for the tx single packet
cmd:aspeed: change broadcom id matching
cmd:aspeed: add support of broadcom 54210/54213 test
cmd:aspeed: refactor phy internal loopback
cmd:aspeed: fix typo
cmd:aspeed: remove redundant debug print
cmd:aspeed: skip deselect package for I350 IOP issue
cmd:aspeed: add NCSI_VERBOSE_TEST (default off)
cmd:aspeed: add 100ms for phy ready
cmd:aspeed: bug fixed of the length decoding of the dramtest
arm:dts: revise ast2600 mac1/2 rgmii delay setting
net:phy: add phy-mode support on broadcom 5461 series
cmd:aspeed: add phy tx/rx delay control arguments
cmd:aspeed: add bcm54615, rtl8211f and marvell88e15 delay setting
cmd:aspeed: restore default page
ram:aspeed: revise coding style
ram:aspeed: refactor coding style
arm:dts: revise rgmii tx/rx delay
Fugang Duan (1):
net: phy: realtek: add rx delay support for RTL8211F
Jamin Lin (1):
Add evb-ast2600-obmc-emmc-cot_defconfig config to support AST2600 emmc secure boot for OpenBMC
Johnny Huang (6):
otp: fix a1 program issue
otp: fix otp cmd stuck
otp: update version number to 1.0.2
otp: add AST2600A3
secure boot: fix public key exponent
otp: update print otp image
Ryan Chen (3):
AST2600:platform.S for AST2600A3 fix for reset. it will apply for AST2600A1/A2/A3
ast2600:ddr: fix memory bandwidth issue
sdram : ast2600
Troy Lee (2):
config: ast2600: support OpenBMC boot from eMMC image
config: ast2600-evb for openbmc boot command update
chin-ting_kuo (1):
Revert "mmc: Enable SDMA feature when boot from eMMC"
The previous version of v2019.04-aspeed-openbmc is kept in the branch
archive/v2019.04-aspeed-openbmc-3.
Change-Id: Ie492bdbfaec32c3e3e0caf8d4fa1806fcd1febec
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add a development (insecure, also known as 'imprint') key to
u-boot-aspeed-sdk that can be used through socsec for signing the SPL on
ASPEED AST2600 devices.
The keypair was generated according to socsec's documentation, using:
$ openssl genrsa -out rsa_oem_dss_key.pem 4096
$ openssl rsa -in rsa_oem_dss_key.pem -pubout \
-out rsa_pub_oem_dss_key.pem
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Change-Id: I9c03ed9603d7362e033862dd1e5138ba7164f13d
|
|
Add the necessary build infrastructure to allow ASPEED AST2600 devices
to use socsec to sign the U-boot SPL, allowing Aspeed's Verified Boot to
validate it.
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Change-Id: I7b38a59596819982f0a222812fcc64dfb91e104f
|
|
Commit '3b8a17c1d7 poky: subtree update:7d0988966c..1203d1f24d' pulls a
change from openembedded-core ('cc6c3e3152 u-boot: Move definitions to
common locations') that moves some definitions from u-boot.inc to other
places. As u-boot-aspeed and u-boot-aspeed-sdk recipes in the
meta-aspeed layer have their own version of this file
(u-boot-aspeed.inc), apply the same changes that were applied to
openembedded-core, which is where those recipes were based on initially,
to keep them consistent and allow the use of functionality that was
introduced as part of that series as well (i.e., '5af4dfe83c u-boot: Add
infrastructure to SPL verified boot' on the openembedded-core tree).
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Change-Id: If9fd1eebf988d341ed1e3adc46276daa56598cba
|
|
This updates the OpenBMC u-boot tree to use ASPEED's latest SDK, and
adds support for FIT verification including use of the HACE to perform
SHA calculations on the ast2600.
The changes come in three categories; fixes backported and sent to
ASPEED for merging in a future SDK release, patches carried that are
specific to OpenBMC, and the new FIT and HACE support.
Note that this does not remove the legacy image support from the SPL, so
there is no dependency on the changes to load u-boot as a FIT.
Fixes backported from upstream and set to ASPEED:
Harald Seiler (1):
common: hash: Remove a debug printf statement
Heinrich Schuchardt (2):
fit: check return value of fit_image_get_data_size()
image-fit: fit_check_format check for valid FDT
Jean-Jacques Hiblot (1):
spl: fit: don't load the firmware twice
Joel Stanley (4):
hw_sha: Fix coding style errors
hash: Allow for SHA512 hardware implementations
net/ncsi: Remove debugging
fit: Use hash.c to call SHA code
Patrick Doyle (1):
rsa: reject images with unknown padding
Reuben Dowle (1):
Add support for SHA384 and SHA512
Simon Glass (3):
image: Be a little more verbose when checking signatures
image: Return an error message from fit_config_verify_sig()
image: Check hash-nodes when checking configurations
Patches carried in the OpenBMC fork:
Eddie James (3):
ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters
arch: ARM: Aspeed: Add SPL eMMC partition boot support
configs: Add AST2600 SPL eMMC configuration
Joel Stanley (11):
dts: ast2600-evb: Enable FSI masters
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
ast2600: Allow selection of SPL boot devices
config: ast2600: Reduce SPL image size
ast2600: Modify SPL SRAM layout
config: ast2600: Enable FIT signature verification
clk: aspeed: Add HACE yclk to ast2600
Features added for FIT verification and HACE support:
Joel Stanley (10):
configs/ast2600: Make early malloc pool larger
crypto: Add driver for Aspeed HACE
ast2600: Enable HACE probing in SPL
ast2600: Add HACE to device tree
ast2600: spl: Add ASPEED_LOADERS option
ast2600: spl: Support common boot loader features
config: ast2600: Configure common MMC SPL loader
configs: ast2600: Enable FIT SHA512 support
ast2600: Configure u-boot load size
configs: ast2600: Use non-a1 config for openbmc spl emmc
Change-Id: I4e5a1adb6e2bf17823b042c31b151bfdad9d3175
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
into update
|
|
into update
|
|
These patches bring SHA512 support to the FIT in u-boot, SPL and
mkimage. The majority of the feature comes in with "Add support for
SHA384 and SHA512", while the rest are relevant bugfixes that have been
made to master since v2019.04.
There is not yet a change to the configuration to enable the new
algorithm and therefore only a minor image size change (an increase of
247 bytes due to "image: Check hash-nodes when checking configurations").
Harald Seiler (1):
common: hash: Remove a debug printf statement
Heinrich Schuchardt (1):
image-fit: fit_check_format check for valid FDT
Joel Stanley (1):
ast2600: spl: Include RAM loader in BL2 ifdef
Patrick Doyle (1):
rsa: reject images with unknown padding
Reuben Dowle (1):
Add support for SHA384 and SHA512
Simon Glass (3):
image: Be a little more verbose when checking signatures
image: Return an error message from fit_config_verify_sig()
image: Check hash-nodes when checking configurations
Change-Id: I69d7ac29d8c4d710c57fc6a45b1c48022e6808c0
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This turns on FIT signature verification ("vboot") features in the
ast2600_openbmc_spl_emmc_defconfig.
A signed FIT will be checked by the loader (either SPl or u-boot
proper).
Heinrich Schuchardt (1):
fit: check return value of fit_image_get_data_size()
Joel Stanley (4):
ast2600: Allow selection of SPL boot devices
config: ast2600: Reduce SPL image size
ast2600: Modify SPL SRAM layout
config: ast2600: Enable FIT signature verification
Change-Id: If0974fffc63072dc922b3bc5899a791adcdb40a3
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Two backports from u-boot master relating to SPL signaturues, and a
patch from Hongwei that was sent to the upstream list.
Heiko Stuebner (2):
spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE
spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE
Hongwei Zhang (1):
Common:fdt: Check for error return value
(From meta-aspeed rev: e173b53d6d29d1489853379d78649f70420ca4c7)
Change-Id: I1ad719b86de2a110fef44a27c584e74faedc5748
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
into update
|
|
This adds a new configuration ast2600_openbmc_spl_emmc_defconfig that
can be used on either emmc or nor systems. Note that it will try to
locate the environment on emmc, so use on nor-only systems will always
use the default environment.
Machines that wish to use this configuration should set UBOOT_MACHINE in
their <machinename>.conf.
Eddie James (3):
ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters
arch: ARM: Aspeed: Add SPL eMMC partition boot support
configs: Add AST2600 SPL eMMC configuration
(From meta-aspeed rev: 1a970c012150cee8e5d937716f33e4f1c2e85e02)
Change-Id: I53f6b39579529f7bb6d98f4ee9a3cb067dc75cb5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
net/ncsi: Disable DEBUG
(From meta-aspeed rev: 59eb0deec79fa1939a450e74b416b75591b47788)
Change-Id: Ib3f7695606a936b86a8ff885ab2a5c9598eae736
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
As ASPEED develop their ast2600 u-boot features, we've had a need to
integrate changes from their tree into the openbmc tree. In the past
we lined this up with a major version bump (as with the kernel),
meaning we could create a new branch with our "out of tree" changes
applied on top. However, in this case their SDK is still based on the
2019.04 release, so there's not a clear way forward.
I've chosen to rebase the openbmc changes on top of their branch. The
old branch is still accessible at archive/v2019.04-aspeed-openbmc-1.
The bitbake recipe will continue to work as it uses the nobranch=1
flag, and specifies the version based on the SHA.
The new branch contains their aspeed-master-v2019.04 tree as of today,
with the OpenBMC changes applied on top.
The ASPEED changes include:
- support for the ast2400
- Disable of buggy AXI prefetch feature
- SPL, OTP and secure boot fixes
- SPI flash updates and calibration changes
- eMMC, Ethernet, fixes
I've boot tested it running from SPI NOR on AST2600 A1 hardware, as
well as QEMU, and it reached userspace. I will bump the bitbake recipe
to integrate the changes into openbmc.
Andreas Dannenberg (1):
spl: Make image loader infrastructure more universal
Chia-Wei, Wang (18):
config: ast2600: Enable board early initialization
ARM: dts: ast2600: Revert dm-pre-reloc property from eMMC
configs: ast2600-slt: Change DRAM speed to 1600Mbps
spl: fit: Separate FIT image load and processing
spl: ast2600: Fix the load buffer address
Revert "spl: fit: Separate FIT image load and processing"
Revert "add LPC/eSPI storngest Driving Strength"
configs: ast2600-slt: Add ENV default configuration
aspeed: Fix compile warning
ast2600: Remove AXI-prefetch support
wdt: ast2600: Fix reset mask setting
spl: ast2600: Add secure boot flow support
update bootflow
fix boots address
configs: ast2600-fpga: Fix defconfig and header
ARM: spl: Add SPL relocation support
spl: ast2600: Add relocation support
ARM: timer: ast2600: Add dynamic frequency detection
Chin-Ting Kuo (22):
spi: timing: Change timing calibration method
spi-flash: w25q01jv flash model support
spi-flash: aspeed: Remove unused variable
spi: Add w25q512jvfm flash model
boot: emmc: Boot from eMMC feature early porting
emmc: Move "u-boot,dm-pre-reloc" flag to evb.dts
spi-nor: Add flash model w25q01jvfim and fix typo
mmc: SD: Add property for timing phase and drive type
mmc: slt: Add timing phase and drive type for MMC
spi: cpuinfo: Add ABR, spi_aux_pin info
spi: crypress: Set 4B mode to controller when address width is 4
spi: AST2500: Modify ABR boot source log
spi: scu_info: Simplify scu info log related to fmc/spi
spi: ast2500: Porting spi1 setting
spi-flash: Set FMC04/SPIR04[6:4] when enter 4B mode
spi-flash: Use user mode under specific condition
spi-flash: Modify SPI/FMC CE1 default decode address
fpga: fixbug: Remove CONFIG_BOARD_EARLY_INIT_F
dp: Update dp base address
spi: bugfix: Do not change read command until flash probe
fmc: Set FMC50[1] for waiting WIP idle
eMMC: Do not fill FMC50[1] when boot from eMMC
Dylan Hung (18):
add rmii rclk oe control
add rmii rclk pin control
add board_ram_info for ast2600 series
move borad_add_ram_info to borad_common.c
fix FPGA RGMII pin setting
revise fpga mac device
fix typo
don't print message in sdramphy_init
write scu config back if vga config is "0"
refactor code: add macro for ECC setup
trim tailing whitespaces
don't re-init ecc if dram has been initialized
fix ncsi build
don't reserve VGA memory if efuse bit is set
fix fpga booting
add ast2650 fpga config
remove dram initialization from platfrom.S
remove mac init from platform.S
Joel Stanley (7):
dts: ast2600-evb: Enable FSI masters
aspeed: Add machine names
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
Johnny Huang (37):
otp: remove print process
otp: ignore data region last 2 dw when program
otp: program 2 dw then verify 2 dw when program data region
otp: skip print data info when no key
otp: set default value for otp strap programming
rng: add aspeed rng cmd
spl: fix duplicate define CONFIG_SYS_MONITOR_LEN
defconfig: cot: reduce spl code size
config: remove tftpput
secure boot: fix hace reset and compile warning
clk: rsa clock source set to hpll
update otp patch code
otp update
otp: udpate program
otp: udpate strap
otp: update strap program bit
otp: udpate strap read
otp: reduce the code
spl: ast2600: update secure boot flow
defconfig: ast2600: update spl config
spl: aspeed: fix ecc build
secure: update bl2 verify
secureboot: update bl3 verify
aspeed: emmc: support emmc boot
defconfig: support new boot flow
defconfig: rename ast2600a1 as defaut config
fix merge error
defconfig: aspeed: update ecc config for new boot flow
Revert "defconfig: aspeed: update ecc config for new boot flow"
defconfig: aspeed: update ecc config for new boot flow
otp: fix ast2600a1 info
defconfig: enable position independent to support boot from uart
config: enable CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK as default for ast2600
boot0: aspeed: add image size header for boot form sram
cmd: otp: udpate for ast2600a2
update ast2600a2 otp register setup
otp: fix compile warning and add strap info
Peter Robinson (1):
Remove redundant YYLOC global declaration
ryan_chen (40):
add link status
update gpio driver
fix i2c pinctrl
update sd/emmc controller source
update
add ibm platform
add kconfig for env
add ast2600 openbmc defconfig
fix env compile error
update pcie driver
mv to cmd/aspeed folder
update for mv cmd/aspeed folder
add pll test
update full test
update clk
add display port driver
add ast2600 defconfig
update mac info
update dp driver
update hclk setting
update axi ahb div cal
update dp firmwire
add more desciption about eMMC clk source
update file mode
update ast2400 have 32kbyte
add ast2400 ompatible
add ast2400
add reset for ast2400
add ast2400 include file
add ast2400 board
add ast2400 defconfig
add ast2400 pinctrl
update ast2400 reset
add ast2400 clk
add ast2400 defconfig
update ast2500
add mac for ast2400
add for ast2400
add ast2400 clk
Video format look-up table is updated for 640x480@85Hz
(From meta-aspeed rev: 9d5ae052312dc45a645dc5e7ab8a9daf4ef686d6)
Change-Id: I50a06ca91d86f4548d47e85e215ace4498c0c9a8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Zane reported that gcc 10 will fail to build the branch. This is the
upstream fix.
Peter Robinson (1):
Remove redundant YYLOC global declaration
(From meta-aspeed rev: 6630a1310fd9b17abdd8fca73f5c22fc346f9c8a)
Change-Id: Ie72bb58c5c7684e42951e80ce6f80e98ef4f15fe
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Generate a default environment to boot an eMMC based on a txt
file. Populate the generated environment image into the eMMC.
(From meta-aspeed rev: fdc603c73b2dc8851ce2d1684e9c71a5ce51a5b8)
Change-Id: I93944b183b7907202b02854e931593d62603ae77
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Create a fw_env.config for eMMC with a redundant environment
based on the mmc distro feature. The environment is located in
the first eMMC partition in the User Data area.
(From meta-aspeed rev: 3aa2db46e8097aa0a9627684686ca56b5d6b9872)
Change-Id: I6e768e308f03513c6cf394a0adc7110d17322d49
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Alejandro Enedino Hernandez Samaniego (1):
libfdt: Make it compatible with newer dtc
(From meta-aspeed rev: 724b95b0ed5b41f28b2f5926c209dace73a9b336)
Change-Id: I9ca8614fe5127e6875386745780ca3c3c607d168
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
|
|
The u-boot.inc from upstream has been moved into this repository as
its upstream version is no longer compatible with openbmc/u-boot.
See commit 9052e5b for more details.
Some notes on attempting to get upstream to work. Got to issue 3 and
decided that instead of trying to cherry-pick in specific fixes from
upstream, we're going to need a full rebase. Until this is possible, I
think our best option is to just use the .inc from the working version
of poky which is what u-boot-aspeed.inc is.
1) Build directory (B) def moved to common .inc
Define BUILD directory in u-boot-common-aspeed-sdk_2019.04.inc
recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
+B = "${WORKDIR}/build"
2) Support in Makefile for new u-boot-initial-env file
Pull in the following commit:
https://github.com/u-boot/u-boot/commit/bdaa73a5b3923257add182b4ab8058dbfa33421b
Available in my fork:
https://github.com/geissonator/u-boot/tree/v2019.04-aspeed-openbmc-u-boot-initial-env-fix
3) CONFIG_DEFAULT_DEVICE_TREE needed
| arm-openbmc-linux-gnueabi-objcopy --gap-fill=0xff -j .text -j .secure_text -j .secure_data -j .rodata -j .hash -j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn -j .binman_sym_table -j .text_rest -j .dtb.init.rodata -j .efi_runtime -j .efi_runtime_rel -O binary u-boot u-boot-nodtb.bin
| make -f /home/andrewg/Code/openbmc/build/tmp/work/witherspoon_tacoma-openbmc-linux-gnueabi/u-boot-aspeed-sdk/1_v2019.04+gitAUTOINC+58583dd97d-r0/git/scripts/Makefile.build obj=arch/arm/dts dtbs
| test -e arch/arm/dts/unset.dtb || ( \
| echo >&2; \
| echo >&2 "Device Tree Source is not correctly specified."; \
| echo >&2 "Please define 'CONFIG_DEFAULT_DEVICE_TREE'"; \
| echo >&2 "or build with 'DEVICE_TREE=<device_tree>' argument"; \
| echo >&2; \
(From meta-aspeed rev: cd159fccefe991336e798da35ed5a2b0abf27e62)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I1d28bd1125fe5acb1e644a751e44c65772892d0c
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
|
|
(From meta-aspeed rev: 31cde1a9933517f545e23e6a539349eaa92e903f)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ic1e0aa287e911953764b4356ebfed0d400b987b9
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The latest upstream of oe-core has diverged to the point where the
meta-aspeed layer can no longer utilize the shared u-boot.inc
In particular it has introduced a new, buildable config file,
u-boot-initial-env, which is referenced throughout the u-boot.inc file
now.
The best solution is that OpenBMC upstream the changes it requires for
u-boot but resource constraints have prevented that.
The current hybrid approach of using a 2016 version of u-boot, pointing
to source code in openbmc/u-boot but continuing to use the upstream
u-boot.inc really doesn't buy much and causes maintenance issues like
we're seeing here. Best to just pull the working version into
meta-aspeed and just cherry pick in the one change OpenBMC needs which
is the move to python3. The python3 move will be in the next commit in
this series.
The u-boot.inc used here was from poky with this sha:
9052e5b32a0dbc810782be4963e775609b8dcc04
Resolves openbmc/u-boot#24
(From meta-aspeed rev: 8b3d81d7cd9dd0254c3b03dddad18b9e74d2975d)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I8af2eddfa6690b840af9fc411814fb551cc25230
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This works around an intermittent boot failure seen on Tacoma1z.
Joel Stanley (6):
aspeed: Add machine names
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
(From meta-aspeed rev: e63dd680abed78dc2b2126c6fcbf3497c35ae18b)
Change-Id: I0a2f17d242f3312592fb975fa4231237102ea517
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The recipe was first created with the make target set to
u-boot.bin because there were some compilation errors.
These errors are not seeing anymore. By removing the u-boot.bin
target and allowing it to be the default (all), other targets
like u-boot-spl.bin can be automatically built based on the
defconfig.
(From meta-aspeed rev: 08e8e7430606d712d8ab3630cbdc650f71caf280)
Change-Id: If643afcfe6a9cdea63dd0d8011f6f2af8e287079
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into update
|
|
The configuration was not set at all, leaving us with the default
configuration file from u-boot.
This sets it to the u-boot environment partition, /dev/mtd2.
(From meta-aspeed rev: fc48e308dd25b99535a5412cbbdf1fcd66238a9b)
Change-Id: Ied346a6c15f0068b8ab54cec02bc89bf9e553127
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
config: Update ast2600 openbmc environment location
(From meta-aspeed rev: 8f741295a2a80ecd37cf865e76fa6f32a0223af8)
Change-Id: I83fa7c4ab457972f2efd738eda8a2d2a10cb65e7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This is a fork that is based on ASPEED's 2019.04 SDK fork. The goal is
to move to a mainline based tree, but while that work is underway, this
allows ast2600 support to move forward.
This gains support for NC-SI, and uses kconfig for the default
boot command allowing us to drop the patch to aspeed-common.h.
Machines will need to indicate which device tree to use. If possible we
should look to having a few common device trees, but for now they are
machine specific. The AST2600 is configured to use the ast2600a1-evb
device tree, which will also work on the a0 variant.
(From meta-aspeed rev: 22ccf4648a776c458300c97a6d001a843b2b5c9b)
Change-Id: Ib21dc9962761aac3f3148fe4908439b975545e1e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
ssh://git-amr-1.devtools.intel.com:29418/openbmc-openbmc into HEAD
|
|
Add a config snippet that sets CONFIG_BOOTCOMMAND to the correct address
on 128MiB flashes.
This requires a refresh of the u-boot sdk patch we've been carrying such
that CONFIG_BOOTCOMMAND is set conditionally if not set previously.
(From meta-aspeed rev: 4c8b1d729b5b21c93685cd1b1bdde05afa81f9e8)
Change-Id: I7dece4bcee6d68a0367fcf4eafb78f0db3e4e4f8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
5b6780e981 changed the u-boot+env size and thus the same fit image
address (512KiB) can be used on g6 as on the other aspeed SoCs.
Refresh the initial u-boot patch rather than a new one because the
original has not yet been accepted upstream.
(From meta-aspeed rev: 6aa4aaf66f96acaf84a6c434ddfb3e142c087bf4)
Change-Id: I5bcd6468f1578f7f820e3eeeec23d5b3756dca60
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chia-Wei, Wang (3):
ast2600: add CA7 cache and SRAM parity check
ast2600: revise the boot initialization flow
wdt: aspeed: fix compile warning
Dylan Hung (7):
[update] revise memory reservation
[debug] apply DDR4 100M setting
[update] add config for DDR-400
[update] slower HPLL
[update] adjust cpu timer according to the HPLL
[update] fine tune DDR-PHY param
[fix] fix DDR-PHY training hangup
ryan_chen (6):
update pcie driver
add pcie rc pinctrl
add two pcie rc
add support two
add default pcie at ast2600-evb dts
update ast2600 fmc interrupt #no
(From meta-aspeed rev: 7daf7145abdd5499da5ebb25f4f214712b596562)
Change-Id: I0cf2c21a605683472f9dcdc4516d7c4f5d7858e5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Aspeed u-boot tree has the g6 environment at 640KiB. Move to 512KiB
for easy OpenBMC compatibility.
(From meta-aspeed rev: 5b6780e9810f79b352db7ae8c6a352d978ef2cd3)
Change-Id: I65a8c799eb1db8756516a4f46098c75ee18751d1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chia-Wei, Wang (1):
aspeed: ast2600: add CPU clock initialization
Dylan Hung (9):
[add] add ECC setting
[update] correct the ecc range
[fix] fix build error when ASPEED_ECC is off
[update] ecc off by default
[update] add ECC enable message
target margin 0 is legal arg.
[fix] fix incorrect DMA base calculation
[update] fix 2600 fpga issue.
[update] update ast2600 fpga config
ryan_chen (8):
add otp strap bspi size info
add pcie support for evb
add for spi aux information
disable h2x pcie at default
add for h2x
add i2c pinctrl
add i2c pinctrl
update enable ast2600 evb i2c
(From meta-aspeed rev: af1e9221445c4932ead0722287873686fe86b399)
Change-Id: I1bfcad52dbd0a27f0e753c8c14d22584156f02b5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|