Age | Commit message (Collapse) | Author | Files | Lines |
|
5b6780e981 changed the u-boot+env size and thus the same fit image
address (512KiB) can be used on g6 as on the other aspeed SoCs.
Refresh the initial u-boot patch rather than a new one because the
original has not yet been accepted upstream.
(From meta-aspeed rev: 6aa4aaf66f96acaf84a6c434ddfb3e142c087bf4)
Change-Id: I5bcd6468f1578f7f820e3eeeec23d5b3756dca60
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chia-Wei, Wang (3):
ast2600: add CA7 cache and SRAM parity check
ast2600: revise the boot initialization flow
wdt: aspeed: fix compile warning
Dylan Hung (7):
[update] revise memory reservation
[debug] apply DDR4 100M setting
[update] add config for DDR-400
[update] slower HPLL
[update] adjust cpu timer according to the HPLL
[update] fine tune DDR-PHY param
[fix] fix DDR-PHY training hangup
ryan_chen (6):
update pcie driver
add pcie rc pinctrl
add two pcie rc
add support two
add default pcie at ast2600-evb dts
update ast2600 fmc interrupt #no
(From meta-aspeed rev: 7daf7145abdd5499da5ebb25f4f214712b596562)
Change-Id: I0cf2c21a605683472f9dcdc4516d7c4f5d7858e5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The Aspeed u-boot tree has the g6 environment at 640KiB. Move to 512KiB
for easy OpenBMC compatibility.
(From meta-aspeed rev: 5b6780e9810f79b352db7ae8c6a352d978ef2cd3)
Change-Id: I65a8c799eb1db8756516a4f46098c75ee18751d1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Chia-Wei, Wang (1):
aspeed: ast2600: add CPU clock initialization
Dylan Hung (9):
[add] add ECC setting
[update] correct the ecc range
[fix] fix build error when ASPEED_ECC is off
[update] ecc off by default
[update] add ECC enable message
target margin 0 is legal arg.
[fix] fix incorrect DMA base calculation
[update] fix 2600 fpga issue.
[update] update ast2600 fpga config
ryan_chen (8):
add otp strap bspi size info
add pcie support for evb
add for spi aux information
disable h2x pcie at default
add for h2x
add i2c pinctrl
add i2c pinctrl
update enable ast2600 evb i2c
(From meta-aspeed rev: af1e9221445c4932ead0722287873686fe86b399)
Change-Id: I1bfcad52dbd0a27f0e753c8c14d22584156f02b5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes a fix to the bootm limit issue so the patch can be
removed. It also addresses other issues, such as an updated SMP
handshake and booting larger kernels.
(From meta-aspeed rev: 921779183e3d57dbfddc9179f6b8fc413b453553)
Change-Id: I5575ac0a7d0f72fa97b3aa6c580bdacc84ac619d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-aspeed rev: fb54525540953435683dcc3bee915123e25a1a8b)
Change-Id: I3dcce46f6f18ea9cf24a8b53b6f79a9899e7d6c8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This patch is required to boot on the ast2600evb which has 2GB of RAM.
It has been submitted to aspeed for inclusion in their tree.
(From meta-aspeed rev: 229a6556b33641bdfc770eb9566b3db3ce01354c)
Change-Id: Ic2605f6634c82bcf8c1f0d5e166fea88ff7722d4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Start by copying oe-core recipes-bsp/u-boot/ into the Aspeed BSP. The
uboot recipes in oe-core master currently point to 2019.07 u-boot and
the Aspeed SDK branch being pointed to by this patch is based on uboot
upstream 2019.04. There weren't any changes in oe-core going from
2019.04 to 2019.07 so thats OK.
After copying the oe-core recipes, fix up SRC_URI, HOMEPAGE, and a
couple other variables to point at the Aspeed u-boot fork.
The current aspeed-master-v2019.04 tip and evb-ast2600_defconfig will produce
a uboot binary but make returns non-zero:
CFGCHK u-boot.cfg
Error: You must add new CONFIG options using Kconfig
The following new ad-hoc CONFIG options were detected:
CONFIG_RAM
Please add these via Kconfig instead. Find a suitable Kconfig
file and add a 'config' or 'menuconfig' option.
make: *** [Makefile:1010: all] Error 1
As such the utility of this recipe is limited until the above issue is
addressed.
The Aspeed SDK is intended to be the basis for Aspeed G6 bringup.
(From meta-aspeed rev: fe03326ee328718a79138062a0db374c0685a9c7)
Change-Id: I266dc10dd8549c024ec7012da5e576a2436d195b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Hongwei Zhang (1):
aspeed/flash: add winbond SPI support
(From meta-aspeed rev: d2b5ec7b57fc02081b0912adb0a6b60a496aef8a)
Change-Id: Id9db8daa9f5df2b16951bc02a4ea9d4d389b3ed7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
aspeed/flash: Add MX66L1G45G chip
(From meta-aspeed rev: 32422e0ec2c05d0940448992ecbdd9d5d89c7407)
Change-Id: Ie976e6210c99521423d17873237cd80b59e50f43
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cédric Le Goater (1):
aspeed/flash: fix definition of the MT25QL01GB chip
(From meta-aspeed rev: 37b73caedf44bc51e1bf798fe9d566f8646353b2)
Resolves https://github.com/openbmc/u-boot/issues/18
Change-Id: If4082230d50c8da4a5a731fc14d938edd018ea10
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (1):
aspeed: flash: Add MT25QL01GB chip
David Thompson (1):
aspeed/ast-scu.c: add ast_get_m_pll_clk() for AST_SOC_G5
(From meta-aspeed rev: e16d4b9d34e083c851b31d33c549f70fc258ca11)
Change-Id: Ibf2c19287048c2fa82c9c9cffdb86f524cdee16c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
U-boot has its own FDT implementation but it isn't isolated in terms
of include search paths very well in our ~2016 snapshot.
Prior to now (December 2018) it wasn't noticeable but with the move to
yocto 2.6 and libfdt 1.4.5 the FDT implementations are different enough
that if you have libfdt headers installed on your build host (which
under Yocto, is _always_) you will have host contanmination and 2016
u-boot will fail to build.
Work was done in upstream u-boot during 2018 to address this, but
backporting would be a not-insignificant level of effort. Instead, use
the following hack until such a time that we can rebase on a more
recent (circa end of 2018) u-boot tree.
(From meta-aspeed rev: 7f8140089d95a529bf50c6c71112385607a64bcf)
Change-Id: I7513e2c651040fab55c2e500a6e801d4f5120d9d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Backport oe-core 71309a5c91209d4afaee874889fa7eefb266185f to our
recipes:
u-boot: Add missing dependency on flex and bison native
The U-Boot build, in particular the Kconfig, depends on bison and
flex native. Add the missing dependencies.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
(From meta-aspeed rev: ff2e4ed2f8f642fe54ac094c02c22166d8ee3131)
Change-Id: Icd04ad815c63149af6033d1419a1a2e180e1b728
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The new subtree paradigm has moved the meta-bsp layers to the top level
Change-Id: Ic4f64c39465be699bed3649e125e027d17daf938
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|