summaryrefslogtreecommitdiff
path: root/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb
AgeCommit message (Collapse)AuthorFilesLines
2021-12-22linux-aspeed: Move to v5.15.10 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.15.6 through to 5.15.10 stable releases. Change-Id: Ib4e8e69386ba6c7857c22d8b2fb063c9d8d03b36 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-12-22linux-aspeed: Add s7106, Bletchley, VegmanJoel Stanley1-1/+1
These are backports from the v5.17 aspeed pull request. Ali El-Haj-Mahmoud (1): ARM: dts: aspeed: Add TYAN S8036 BMC machine Andrei Kartashev (2): dt-bindings: vendor-prefixes: add YADRO ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC Eddie James (2): ARM: dts: aspeed: p10: Enable USB host ports ARM: dts: aspeed: p10: Add TPM device Howard Chiu (1): ARM: dts: aspeed: Adding Facebook Bletchley BMC Jae Hyun Yoo (3): ARM: dts: aspeed: add LCLK setting into LPC IBT node ARM: dts: aspeed: add LCLK setting into LPC KCS nodes dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property Joel Stanley (3): dt-bindings: aspeed: Add Secure Boot Controller bindings ARM: dts: aspeed: Add secure boot controller node ipmi: bt: Add ast2600 compatible string Lei YU (2): ARM: dts: Add openbmc-flash-layout-64-alt.dtsi ARM: dts: aspeed: g220a: Enable secondary flash Oskar Senft (1): ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config Quan Nguyen (2): ARM: dts: aspeed: mtjade: Add I2C buses for NVMe devices ARM: dts: aspeed: mtjade: Add uefi partition Change-Id: I89371d3ab9c99415b3e971fbb62a6cad8b8e4b16 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-26linux-aspeed: Move to v5.15.5 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.15.1 through to 5.15.5 stable releases. Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: Ibe8c433439b5863b0d49934d4d43b239bdc736d7
2021-11-26linux-aspeed: Fixes for SCU IRQ, MDIO, clock, vga_pwJoel Stanley1-1/+1
Billy Tsai (1): irqchip/aspeed-scu: Replace update_bits with write_bits. Dylan Hung (1): mdio: aspeed: Fix "Link is Down" issue Joel Stanley (2): drm/aspeed: Fix vga_pw sysfs output clk/ast2600: Fix soc revision for AHB Change-Id: Idd8d89c4869faa8528f1c5066ec3ed467ea85911 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-05linux-aspeed: nct7802 bindings and configurabilityOskar Senft1-1/+1
Oskar Senft (3): dt-bindings: hwmon: Add nct7802 bindings hwmon: (nct7802) Make temperature/voltage sensors configurable ARM: dts: aspeed: tyan-s7106: Update nct7802 config Signed-off-by: Oskar Senft <osk@google.com> Change-Id: I6dedace1a62f136c461ce6a207ef925d0bd072d1
2021-11-03linux-aspeed: UART routingJoel Stanley1-1/+1
Chia-Wei Wang (2): soc: aspeed: Add UART routing support soc: aspeed: Fix UART routing driver Change-Id: I4a6fc7ee06e7e32ef15ceba79d278869e6c6c42e Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-02linux-aspeed: Move to Linux v5.15Joel Stanley1-3/+3
This moves the OpenBMC kernel to a v5.15 base. There are 73 patches in the tree, not counting changes that were merged in v5.16 which have been backported. Andrew Jeffery (10): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface ARM: dts: tacoma: Clean up KCS nodes leds: pca955x: Make the gpiochip always expose all pins leds: pca955x: Allow zero LEDs to be specified Brad Bishop (3): ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string eeprom: at25: Split reads into chunks and cap write size Cédric Le Goater (19): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training /dev/mem: add a devmem kernel parameter to activate the device Eddie James (8): soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl dt-bindings: input: Add documentation for IBM Operation Panel input: misc: Add IBM Operation Panel driver ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO spi: fsi: Print status on error spi: fsi: Fix contention in the FSI2SPI engine Fran Hsu (2): ARM: dts: nuvoton: npcm730: Add UDC device ARM: dts: nuvoton: gsj: Add non-mainline nodes George Hung (4): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver ARM: dts: nuvoton: gbs: split SPI flash partition ARM: dts: nuvoton: gbs: Change the name of the partitions Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (4): net: ftgmac100: Ensure tx descriptor updates are visible ARM: dts: ast2600evb: Enable EHCI controller ARM: configs: aspeed: Add openbmc kernel options ipmi: bt-bmc: Use registers directly Tomer Maimon (21): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: dts: npcm7xx: Add out of tree nodes ARM: dts: olympus: Add non-mainline nodes ARM: dts: npcm750: Add fuse regmap support node ARM: dts: npcm7xx: Link fuse syscon to adc and wdt clk: npcm7xx: add read only flag to divider clocks iio: adc: Add calibration support to npcm ADC watchdog: npcm: Add DT restart priority and reset type support pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver pinctrl: pinconf: add pin persist configuration pinctrl: npcm7xx: Add pin persist configuration support spi: npcm-pspi: Add full duplex support dt-binding: bmc: add NPCM7XX JTAG master documentation misc: Add NPCM7xx JTAG master driver watchdog: npcm: Modify get reset status function ARM: configs: add defconfig for Nuvoton NPCM7xx BMC William A. Kennington III (1): net: npcm: Support for fixed PHYs Change-Id: I8c26f71ba75e4f8d8b5697b81f8c73c0d77aae8e Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-11-02linux-aspeed: FSI backportsJoel Stanley1-1/+1
Patches from the v5.16 kernel relating to FSI, OCC and SBE FIFO. Eddie James (7): fsi: occ: Use a large buffer for responses fsi: occ: Store the SBEFIFO FFDC in the user response buffer docs: ABI: testing: Document the OCC hwmon FFDC binary interface hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs docs: ABI: testing: Document the SBEFIFO timeout interface fsi: sbefifo: Add sysfs file indicating a timeout error fsi: sbefifo: Use interruptible mutex locking Change-Id: Iab76e0b1cf658334d8ab0f43bb6c3d1b8912f7a5 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-29linux-aspeed: Move to v5.14.15 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.14.11 through to 5.14.15 stable releases. Change-Id: Ida64acaa1f9c7c26d987fa7979ef29320924f2f0 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-29linux-aspeed: SPI FSI, DTS GPIOsJoel Stanley1-1/+1
Adriana Kobylak (1): ARM: dts: aspeed: rainier: Add power-config-full-load gpio Eddie James (1): spi: fsi: Print status on error Joel Stanley (2): ARM: dts: aspeed: p10bmc: Define secure boot gpio ARM: dts: aspeed: rainier: Remove remaining PCA955X_TYPE_GPIO Change-Id: Ibbfc482ba2ee1a008006875d6065cc36d7c7da20 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21linux-aspeed: Rainier, Everest, ADCJoel Stanley1-1/+1
Eddie James (5): ARM: dts: aspeed: Fix ADC iio-hwmon battery node name ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification ARM: dts: aspeed: everest: Add I2C switch on bus 8 ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms Joel Stanley (1): iio: aspeed_adc: Fix prescaler devres cleanup Change-Id: Icd9903844c926c0d41d912716520eb3807c59039 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-19linux-aspeed: LM25066Joel Stanley1-1/+1
Zev Weiss (8): hwmon: (pmbus/lm25066) Add offset coefficients hwmon: (pmbus/lm25066) Adjust lm25066 PSC_CURRENT_IN_L mantissa hwmon: (pmbus/lm25066) Avoid forward declaration of lm25066_id hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff hwmon: (pmbus/lm25066) Mark lm25066_coeff array const hwmon: (pmbus/lm25066) Add OF device ID table hwmon: (pmbus/lm25066) Support configurable sense resistor values dt-bindings: hwmon/pmbus: Add ti, lm25066 power-management IC Change-Id: I3bd76959963ad7de008197f7349c72b088eb1147 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-14linux-aspeed: fp5280g2, IPMI BTJoel Stanley1-1/+1
Joel Stanley (1): ipmi: bt-bmc: Use registers directly John Wang (1): ARM: dts: aspeed: fp5280g2: Use the 64M layout Change-Id: Id6ec8571bee286cf56ab02bbf9c4b4d278b32426 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-12linux-aspeed: Move to v5.14.11 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.14.7 through to 5.14.11 stable releases. Change-Id: I4e3cbb74fe6204dd804c06a438e9a398f4808894 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-11linux-aspeed: IBM CFF PS, USB EHCIJoel Stanley1-1/+1
Brandon Wyman (3): hwmon: (pmbus/ibm-cffps) max_power_out swap changes hwmon: (pmbus/ibm-cffps) Add mfg_id debugfs entry hwmon: (pmbus/ibm-cffps) Use MFR_ID to choose version Neal Liu (1): usb: ehci: Handshake CMD_RUN instead of STS_HALT for Aspeed Change-Id: I803024cd288339966162ac10fda501a6fb8beef8 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-24linux-aspeed: P10 gpio names, PCA955x backportsJoel Stanley1-1/+1
Andrew Jeffery (2): leds: pca955x: Make the gpiochip always expose all pins leds: pca955x: Allow zero LEDs to be specified Ben Tyner (3): ARM: dts: rainier: Define name for gpio line Q2 ARM: dts: everest: Define name for gpio line Q2 ARM: dts: everest: Define name for gpio line B6 Change-Id: Ibcfc7938deeef2003344a6ae460f0bfc9be3cca6 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-23linux-aspeed: AST2600 ADC and PCA955x enhancementsJoel Stanley1-1/+1
These are backports of patches that are queued for v5.16. Billy Tsai (14): iio: adc: aspeed: set driver data when adc probe. dt-bindings: iio: adc: Add ast2600-adc bindings iio: adc: aspeed: completes the bitfield declare. iio: adc: aspeed: Keep model data to driver data. iio: adc: aspeed: Restructure the model data iio: adc: aspeed: Add vref config function iio: adc: aspeed: Use model_data to set clk scaler. iio: adc: aspeed: Use devm_add_action_or_reset. iio: adc: aspeed: Support ast2600 adc. iio: adc: aspeed: Fix the calculate error of clock. iio: adc: aspeed: Add func to set sampling rate. iio: adc: aspeed: Add compensation phase. iio: adc: aspeed: Support battery sensing. iio: adc: aspeed: Get and set trimming data. Eddie James (8): dt-bindings: leds: Add retain-state-shutdown boolean leds: leds-core: Implement the retain-state-shutdown property leds: pca955x: Clean up code formatting leds: pca955x: Add brightness_get function leds: pca955x: Implement the default-state property leds: pca955x: Let the core process the fwnode leds: pca955x: Switch to i2c probe_new ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest Change-Id: I573e724eccbd79f000704ea893007447d6b2934f Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22linux-aspeed: Move to v5.14.6 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.14.4 through to 5.14.6 stable releases. Change-Id: I26ecac572d91d27c3bb709cadded16e77b9f928d Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22linux-aspeed: P10BMC muxes, LEDs, EEPROM, GPIOsJoel Stanley1-1/+1
Eddie James (4): ARM: dts: aspeed: everest: Add I2C bus 15 muxes ARM: dts: aspeed: rainier: Add system LEDs ARM: dts: aspeed: rainier: Add eeprom on bus 12 ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7 Change-Id: I95950704b432b53388d20cef7f5917d6fc46f904 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22linux-aspeed: Move to v5.14.3 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.14.1 through to 5.14.3 stable releases. Change-Id: I9fddf1581b0562c52fd378ed9581e338d0b96d3e Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-21linux-openbmc: Move to Linux v5.14Joel Stanley1-3/+3
This moves the OpeNBMC kernel to a v5.14 base. There are 78 patches in the tree, plus a the MCTP core and device tree changes that were merged in v5.15 which have been backported. Andrew Jeffery (11): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding ARM: dts: aspeed: p10bmc: Enable KCS channel 2 ARM: dts: tacoma: Clean up KCS nodes B. J. Wyman (2): ARM: dts: aspeed: Rainier remove PSU gpio-keys hwmon: (pmbus/ibm-cffps) Fix write bits for LED control Brad Bishop (3): ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string eeprom: at25: Split reads into chunks and cap write size Cédric Le Goater (19): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training /dev/mem: add a devmem kernel parameter to activate the device Eddie James (11): dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl dt-bindings: input: Add documentation for IBM Operation Panel input: misc: Add IBM Operation Panel driver ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO spi: fsi: Reduce max transfer size to 8 bytes dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible fsi: occ: Force sequence numbering per OCC hwmon: (occ) Remove sequence numbering and checksum calculation Fran Hsu (2): ARM: dts: nuvoton: npcm730: Add UDC device ARM: dts: nuvoton: gsj: Add non-mainline nodes George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Isaac Kurth (1): ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6 Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (4): net: ftgmac100: Ensure tx descriptor updates are visible ARM: dts: ast2600evb: Enable EHCI controller ARM: dts: aspeed: rainier: Enable earlycon ARM: configs: aspeed: Add openbmc kernel options Tomer Maimon (21): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: dts: npcm7xx: Add out of tree nodes ARM: dts: olympus: Add non-mainline nodes ARM: dts: npcm750: Add fuse regmap support node ARM: dts: npcm7xx: Link fuse syscon to adc and wdt clk: npcm7xx: add read only flag to divider clocks iio: adc: Add calibration support to npcm ADC watchdog: npcm: Add DT restart priority and reset type support pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver pinctrl: pinconf: add pin persist configuration pinctrl: npcm7xx: Add pin persist configuration support spi: npcm-pspi: Add full duplex support dt-binding: bmc: add NPCM7XX JTAG master documentation misc: Add NPCM7xx JTAG master driver watchdog: npcm: Modify get reset status function ARM: configs: add defconfig for Nuvoton NPCM7xx BMC William A. Kennington III (1): net: npcm: Support for fixed PHYs Change-Id: I315000ab63c3f6a34d99cf25e366fa0781c85d46 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-16linux-aspeed: AST2600 ADC, P10 GPIO, EEPROM and LED updatesJoel Stanley1-1/+1
The clk patch is a prerequisite for the backport of the ADC patches. The ADC patches are not yet merged, but are under active review and are expected to be merged in v5.16. Version 6 of the patchset was merged. Billy Tsai (14): iio: adc: aspeed: set driver data when adc probe. dt-bindings: iio: adc: Add ast2600-adc bindings iio: adc: aspeed: completes the bitfield declare. iio: adc: aspeed: Keep model data to driver data. iio: adc: aspeed: Restructure the model data iio: adc: aspeed: Add vref config function iio: adc: aspeed: Use model_data to set clk scaler. iio: adc: aspeed: Use devm_add_action_or_reset. iio: adc: aspeed: Support ast2600 adc. iio: adc: aspeed: Fix the calculate error of clock. iio: adc: aspeed: Add func to set sampling rate. iio: adc: aspeed: Add compensation phase. iio: adc: aspeed: Support battery sensing. iio: adc: aspeed: Get and set trimming data. Dmitry Baryshkov (1): clk: divider: add devm_clk_hw_register_divider Eddie James (4): ARM: dts: aspeed: everest: Add I2C bus 15 muxes ARM: dts: aspeed: rainier: Add system LEDs ARM: dts: aspeed: rainier: Add eeprom on bus 12 ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7 Joel Stanley (1): Revert "block: nbd: add sanity check for first_minor" Michael Walle (1): clk: divider: add devm_clk_hw_register_divider_table() Change-Id: I120d78fa77df01e239eeb67b3209cebfe2973491 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-16linux-aspeed: Move to v5.10.65 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.61 through to 5.10.65 stable releases. Change-Id: I754ab3d2c0ede419f082d42e245c9e8dd27166b5 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19linux-aspeed: Move to v5.10.60 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.54 through to 5.10.60 stable releases. Change-Id: Ia91c97e7add0aec1b57c36f31692fc893e274040 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-19linux-aspeed: P2A and AHB2LHB fixes, CFF PSU, P10 gpiosJoel Stanley1-1/+1
B. J. Wyman (1): hwmon: (pmbus/ibm-cffps) Fix write bits for LED control Iwona Winiarska (2): soc: aspeed: lpc-ctrl: Fix boundary check for mmap soc: aspeed: p2a-ctrl: Fix boundary check for mmap Jim Wright (1): ARM: dts: aspeed: p10bmc: Add power control pins Joel Stanley (1): soc: aspeed: socinfo: Add AST2625 variant Change-Id: I127736fd24c0e066fe8b4b3e2d3584d5503d095a Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-26linux-aspeed: Move to v5.10.53 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.51 through to 5.10.53 stable releases. Change-Id: I04eb2dafbac8405b08202c1dc14e50347155f8c6 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-26linux-aspeed: FSI fixesJoel Stanley1-1/+1
Eddie James (4): spi: fsi: Reduce max transfer size to 8 bytes dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible fsi: occ: Force sequence numbering per OCC hwmon: (occ) Remove sequence numbering and checksum calculation Guenter Roeck (1): hwmon: replace snprintf in show functions with sysfs_emit Joel Stanley (1): hwmon: (occ) Fix p10 temperature sensor type Change-Id: Ie98b83b5d31d7e68912bd88a57560dfec99946a3 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-19linux-aspeed: Move to v5.10.50 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.50 stable release. Change-Id: Ieeed859d83b6807409ad123895fb45b9bc905da5 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-16linux-aspeed: Everest MMC phase, Inspur NF5280M6Joel Stanley1-1/+1
Andrew Jeffery (1): ARM: dts: everest: Add phase corrections for eMMC Ping Guo (1): ARM: dts: aspeed: Add Inspur NF5280M6 BMC machine Change-Id: I7f6f673fd571155e96b5138c653965c262300b87 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-13linux-aspeed: Move to v5.10.49 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.47 through to 5.10.49 stable releases. Change-Id: I6d78d671405d87b70983b0e507abd0cd531b4aea Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-07-12linux-aspeed: KCS, I3C, ECHI, XMDA and FWH2AHBJoel Stanley1-1/+1
Andrew Jeffery (1): ARM: dts: tacoma: Clean up KCS nodes Dylan Hung (1): ARM: dts: aspeed-g6: Fix HVI3C pinctrl function-group Joel Stanley (5): ARM: dts: ast2600evb: Enable EHCI controller ARM: dts: aspeed: rainier: Enable earlycon soc: aspeed: Re-enable FWH2AHB on AST2600 soc: aspeed: Re-enable XDMA on AST2600 Change-Id: Iee20de1cd1e69bc6f583dfaecd0d7e7688d73419 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-28linux-aspeed: AST2600 eMMC fixesJoel Stanley1-1/+1
Andrew Jeffery (2): ARM: dts: tacoma: Add phase corrections for eMMC ARM: dts: everest: Add phase corrections for eMMC Change-Id: I24a1c0f0c6505f7bb16c437eea03edbb254fee93 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24linux-aspeed: Move to v5.10.46 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.44 through to 5.10.46 stable releases. Change-Id: I7e6c006628b4b6cb7242cf3a51de36742fa86e8c Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-24linux-aspeed: KCS raw, Everest PSU, Rainier PSU presenceJoel Stanley1-1/+1
Andrew Jeffery (7): ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ipmi: kcs_bmc: Add a "raw" character device interface ARM: configs: Enable IPMI KCS raw chardev ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node misc: Remove obsolete mctp-lpc chardev ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding ARM: dts: aspeed: p10bmc: Enable KCS channel 2 B. J. Wyman (2): ARM: dts: aspeed: Everest PSU #3 address change ARM: dts: aspeed: Rainier remove PSU gpio-keys Colin Ian King (1): ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int Joel Stanley (2): ARM: config: aspeed: Enable KCS adapter for raw SerIO ARM: dts: aspeed: Fix AST2600 machines line names Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: Ib9c46a3693b8c04512004363501770e4bbd93432
2021-06-17linux-aspeed: KCSJoel Stanley1-1/+1
Andrew Jeffery (16): ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties ipmi: kcs_bmc: Make status update atomic ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi ipmi: kcs_bmc: Turn the driver data-structures inside-out ipmi: kcs_bmc: Split headers into device and client ipmi: kcs_bmc: Strip private client data from struct kcs_bmc ipmi: kcs_bmc: Decouple the IPMI chardev from the core ipmi: kcs_bmc: Allow clients to control KCS IRQ state ipmi: kcs_bmc: Enable IBF on open ipmi: kcs_bmc: Add serio adaptor dt-bindings: ipmi: Convert ASPEED KCS binding to schema dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet ipmi: kcs_bmc_aspeed: Optionally apply status address Change-Id: If4267164d165c0ecb5039d55438d4a58926ecce3 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-11linux-aspeed: Move to v5.10.43 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.43 stable release. Change-Id: I80b2c7f29a96ca11e2d291957bd573c5c70310e9 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-09linux-aspeed: Everest LEDs, Rainier, EVB fixesJoel Stanley1-1/+1
Andrew Jeffery (1): mmc: sdhci-of-aspeed: Turn down a phase correction warning Eddie James (1): ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes Steven Lee (1): ARM: dts: aspeed: ast2600evb: Actually add dts file for A1 and A0 Vishwanatha Subbanna (6): ARM: dts: aspeed: everest: Add system level indicator leds ARM: dts: aspeed: everest: Add nvme and fan indicator leds ARM: dts: aspeed: everest: Add pcie slot indicator leds ARM: dts: aspeed: everest: Add dimm indicator leds ARM: dts: aspeed: everest: Add vrm and other indicator leds ARM: dts: aspeed: everest: Add pcie cable card indicator leds Change-Id: Ibdbc319fcc3490d9bae1e3845f1410150662bd4d Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-07linux-aspeed: Backports of MMC, FSI, DTSJoel Stanley1-1/+1
These changes have been merged to mainline since v5.10 was released, including patches that are queued for v5.14. There are enhancements and bug fixes for FSI, clock phase compensation for MMC to enable HS200 mode, and device tree backports for Mt Jade and the IBM P10 systems. Andrew Jeffery (5): mmc: core: Add helper for parsing clock phase properties mmc: sdhci-of-aspeed: Expose clock phase controls mmc: sdhci-of-aspeed: Add AST2600 bus clock support mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations mmc: sdhci-of-aspeed: Fix kunit-related build error Colin Ian King (1): fsi: core: Fix return of error values on failures Eddie James (3): fsi: scom: Reset the FSI2PIB engine for any error fsi: Aspeed: Reduce poll timeout ARM: dts: aspeed: Rainier 4U: Remove fan updates Jisheng Zhang (1): mmc: sdhci: replace mmc->parent with mmc_dev() for consistency Joel Stanley (4): fsi: aspeed: Emit fewer barriers in opb operations fsi: scom: Remove retries ARM: dts: aspeed: Set earlycon boot argument ARM: dts: aspeed-g5: Add SCU phandle to GFX node Quan Nguyen (3): ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI ARM: dts: aspeed: mtjade: Add PSU support ARM: dts: aspeed: mtjade: switch to 64MB flash layout Santosh Puranik (1): ARM: dts: aspeed: Everest: Fix cable card PCA chips Souptick Joarder (1): pinctrl: aspeed: Fix minor documentation error Steven Lee (6): pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings mmc: sdhci-of-aspeed: Configure the SDHCIs as specified by the devicetree. ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb. ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller. ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0 ARM: dts: aspeed-g6: Add pinctrl settings Troy Lee (1): ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout Vishwanatha Subbanna (1): ARM: dts: aspeed: Everest: Add directly controlled LEDs Yangtao Li (1): fsi: aspeed: convert to devm_platform_ioremap_resource Zhen Lei (1): fsi: master-ast-cf: Remove redundant error printing in fsi_master_acf_probe() Zou Wei (1): fsi: Add missing MODULE_DEVICE_TABLE Change-Id: I236f1b3f3d96c08b1237a0d9860786ebe25566fd Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-04linux-aspeed: Move to v5.10.42 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.40 through to 5.10.42 stable releases. This stable release inclues a fix for the VUART on AST2600: Andrew Jeffery (1): serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART Change-Id: I8249b9564e2839e6ff9b19fbc247700d3f44699f Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-05-26linux-aspeed: MCTP LPCJoel Stanley1-1/+1
Andrew Jeffery (1): mctp-lpc: Match register addresses to updated devicetree Change-Id: I40acb45d536d3dae36971671bc95f69ff3c254a7 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-05-24linux-aspeed: Move to v5.10.39 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.37 through to 5.10.39 stable releases. Change-Id: I05c6ef8cea894db1357376bc3eeea91783c78ba1 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-05-18linux-aspeed: Move to v5.10.36 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.31 through to 5.10.36 stable releases. Change-Id: Ic1f4aa968c2980d27509d76f7129039dc7645fe5 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-05-12linux-aspeed: GFX and GCC 11 backportsJoel Stanley1-1/+1
Arnd Bergmann (1): security: commoncap: fix -Wstringop-overread warning Joel Stanley (2): drm/aspeed: Look up syscon by phandle drm/aspeed: Use dt matching for default register values Change-Id: I5e037831ea1cf47ad0eee63b07b9765dac16ee0a Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-28linux-aspeed: Backport v5.13 patches for dts, lpc, spiJoel Stanley1-1/+1
The following changes were merged to mainline in v5.13 and have been backported to the openbmc dev-5.10 tree. Most are device tree changes, with one fix to the SPI layer and some changes to the LPC devices to match the new device tree. Alpana Kumari (2): ARM: dts: aspeed: rainier: Add presence GPIOs ARM: dts: aspeed: everest: GPIOs support Brandon Wyman (1): ARM: dts: aspeed: everest: Add power supply i2c devices Chia-Wei, Wang (5): dt-bindings: aspeed-lpc: Remove LPC partitioning ARM: dts: Remove LPC BMC and Host partitions ipmi: kcs: aspeed: Adapt to new LPC DTS layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout soc: aspeed: Adapt to new LPC device tree layout Eddie James (9): ARM: dts: aspeed: rainier: Enable fan watchdog ARM: dts: aspeed: rainier 4U: Fix fan configuration ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines ARM: dts: aspeed: everest: Add RTC ARM: dts: aspeed: everest: Enable fan watchdog ARM: dts: aspeed: Add Rainier 1S4U machine ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8 ARM: dts: aspeed: Rainier: Fix humidity sensor bus address ARM: dts: aspeed: Rainier: Update to pass 2 hardware Jim Wright (1): ARM: dts: aspeed: everest: Add UCD90320 power sequencer Joel Stanley (2): ARM: dts: aspeed: rainier: Add missing fan nodes ARM: dts: aspeed: everest: Add size/address cells Konstantin Aladyshev (1): ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses Matthew Barth (2): ARM: dts: aspeed: everest: Add max31785 fan controller device ARM: dts: aspeed: everest: Add pca9552 fan presence Paul Fertser (1): ARM: dts: aspeed: tiogapass: add hotplug controller Priyanga Ramasamy (1): ARM: dts: aspeed: everest: Add I2C components William A. Kennington III (1): spi: Fix use-after-free with devm_spi_alloc_* Change-Id: Ia5425c9cea3fe025f84e93f688ecd8ffec75ad01 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-16linux-aspeed: Move to v5.10.30 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.28 through to 5.10.30 stable releases. Milton Miller (1): net/ncsi: Avoid channel_monitor hrtimer deadlock Change-Id: I072b81523e0d337988e8f62bbea3ba9e1ea3f066 Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-13linux-aspeed: Move to v5.10.27 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.10.24 through to 5.10.27 stable releases. Change-Id: I6f20c70e5d9fd4a88d2b8991196cafd08308ef8d Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-04-07linux-aspeed: USB gadget, SBTSI, OCCJoel Stanley1-1/+1
Eddie James (4): fsi: occ: Don't accept response from un-initialized OCC fsi: occ: Log error for checksum failure hwmon: (occ) Start sequence number at one hwmon: (occ) Print response status in first poll error message Joel Stanley (2): ARM: dts: aspeed: Fixes for ASRock E3C246D4I ARM: config: aspeed_g5: Add SBTSI sensor Kun Yi (3): hwmon: (sbtsi) Add basic support for SB-TSI sensors hwmon: (sbtsi) Add documentation dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings Tao Ren (1): usb: gadget: aspeed: fix dma map failure Change-Id: Ie9a007649087620c3aee2ea039a1fbec995a159f Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-03-31linux-aspeed: mihawk gpio line names, ASRock E3C246D4IJoel Stanley1-1/+1
Nichole Wang (1): ARM: dts: aspeed: mihawk: Add GPIO line names Zev Weiss (1): ARM: dts: aspeed: add ASRock E3C246D4I BMC Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: I3761b9664572605b4bbba894dd4cf949f635ead8
2021-03-31linux-aspeed: jffs2, spi-fsiJoel Stanley1-1/+1
This fixes a bug in jffs2 and overlayfs that was introduced in v5.9 and is present in the dev-5.10 kernel. Eddie James (1): spi: fsi: Remove multiple sequenced ops for restricted chips Joel Stanley (1): jffs2: Hook up splice_write callback Change-Id: Icc3f325c8e6a7bc31bb5c09bf8674bc9b590379a Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-03-12linux-aspeed: Move to v5.10.23 stable releaseJoel Stanley1-2/+2
This includes security and bug fixes from the 5.8.21, 5.8.22 and 5.10.23 stable releases. Change-Id: I770c5e31a18c23406cd18fddcd0b3a2cad52d71a Signed-off-by: Joel Stanley <joel@jms.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-09 03:56:15 +0300