Age | Commit message (Collapse) | Author | Files | Lines |
|
Eddie James (5):
fsi: aspeed: Enable 23-bit addressing
ARM: dts: aspeed: tacoma: Add iio-hwmon nodes for IIO devices
hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
hwmon: (pmbus/ibm-cffps) Fix LED behavior again
soc: aspeed: xdma: Fix command buffer overrun
Joel Stanley (2):
ARM: dts: aspeed: rainier: Add VGA reserved memory region
ARM: dts: aspeed: raininer: Enable XDMA
(From meta-aspeed rev: 6e60548f439e07806f3089a611f801ac85238f0b)
Change-Id: I848095fb60f8a2e364e6ba939466cf834d3a31e3
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.27 and 5.4.28 stable
releases.
(From meta-aspeed rev: 048aaa997f7ade428154f4457cdf5b25e16f5f65)
Change-Id: I5abb494b6ab7acb5edf2060e568c7c580bf3ca24
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (3):
ARM: dts: tacoma: Add KCS node for LPC MCTP
ARM: dts: aspeed: romulus: Add gpio line names
ARM: dts: aspeed: zaius: Add gpio line names
Andrew Jeffery (2):
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
Eddie James (7):
ARM: dts: rainier: Add KCS node for LPC MCTP
soc: aspeed: xdma: Switch to reserved memory
dt-bindings: soc: xdma: Switch to reserved memory node
ARM: dts: aspeed: tacoma: Add reserved memory for XDMA
ARM: dts: aspeed: witherspoon: Add reserved memory for XDMA
ARM: dts: aspeed: ast2600: Set arch timer always-on
ARM: dts: Aspeed: Add witherspoon-128 machine
Joel Stanley (3):
ARM: dts: aspeed: tacoma: Add GPIOs for FSI
fsi: aspeed: Support cabled FSI
ARM: dts: aspeed: tacoma: Add line names
(From meta-aspeed rev: 22600b6fc6d6bdcf33407b7cf8d32b8c09a713e7)
Change-Id: I9251473c0a5b4601845d3c0d588b5a3bdb1d4f40
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.24, 5.4.25 and 5.4.26
stable releases.
(From meta-aspeed rev: e9a99472750d69a0efdfe0277de48dd19dafb839)
Change-Id: I7d2721fde89ac7ad201b6418d9956d29adaea178
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (16):
dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller
irqchip: Add Aspeed SCU interrupt controller
ARM: dts: aspeed: ast2500: Add SCU interrupt controller
ARM: dts: aspeed: ast2600: Add SCU interrupt controllers
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
ARM: dts: aspeed: ast2500: Add XDMA Engine
ARM: dts: aspeed: ast2600: Add XDMA Engine
ARM: dts: aspeed: witherspoon: Enable XDMA Engine
ARM: dts: aspeed: tacoma: Enable XDMA engine
soc: aspeed: xdma: Add memory controller configuration
soc: aspeed: xdma: Add root complex reset
soc: aspeed: xdma: Disable PCI AHB bridge during probe
soc: aspeed: xdma: Fix BMC PCI device class and revision for AST2600
Guenter Roeck (1):
ARM: dts: aspeed: tacoma: Enable eMMC controller
Joel Stanley (1):
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
(From meta-aspeed rev: de4339cc7a300c65f129cc71ed5f8da367a504a1)
Change-Id: I233aa1eb763bb445b5a46c6762ea6b377bb378dd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.22 and 5.4.23 stable
releases.
(From meta-aspeed rev: c6e6f90361325121bd39400513c4b2b83ac4124a)
Change-Id: Id94badca45a5c0e83f082068b4c171cdde060eaf
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (1):
ARM: dts: aspeed: witherspoon: Add gpio line names
Andrew Jeffery (1):
ARM: dts: rainier: Enable VUART2
Ben Pai (1):
ARM: dts: mihawk: Change the name of leds
Jae Hyun Yoo (2):
peci: fix license identifier
hwmon: peci: change label strings to reflect natural numbers
Matthew Barth (1):
ARM: dts: rainier: Set PCA9552 pin types
(From meta-aspeed rev: 213765a9564783b0c5800a58865fea5525373e33)
Change-Id: I71bbef501e1e9c327cdc6c2647218d7ad686f399
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.17, 5.4.18, 5.4.19,
5.4.20 and 5.4.21 stable releases.
(From meta-aspeed rev: 99343a58cbdf1db7e28763be3111e1185d39fe2b)
Change-Id: I14386b65a7bc1b618cef17284f02b8a06c82831f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.12, 5.4.13, 5.4.14,
5.4.15 and 5.4.16 stable releases.
(From meta-aspeed rev: 55b7be3b1aaa0afe3282e17146f191a44e51b530)
Change-Id: I0ad7d464893f4e148993e234dfbfeba5e44ab380
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
i2c: aspeed: Prevent state corruption for IRQ with no status
Matthew Barth (1):
ARM: dts: rainier: Remove regulators
Tao Ren (3):
usb: gadget: aspeed: read vhub config from of_device_id
usb: gadget: aspeed: add ast2600 vhub support
ARM: dts: aspeed-g6: add usb functions
(From meta-aspeed rev: 3275d96ddf674290e50332632a129dc743f9a89f)
Change-Id: I4cc6223f6167b2db830d77122bc142d2f9a074b6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.9, 5.4.10 and 5.4.11
stable releases.
(From meta-aspeed rev: 8333ab8d48605e261f671c6d0c8281c49846c489)
Change-Id: I83d06ebae33df4eb6ebe13b6f09bbc0e849c5cbb
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (3):
hwmon: (pmbus/ibm-cffps) Add new manufacturer debugfs entries
hwmon: (pmbus/ibm-cffps) Add the VMON property for version 2
hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
Jae Hyun Yoo (1):
media: aspeed: refine hsync/vsync polarity setting logic
(From meta-aspeed rev: 28a36e4550477bf0b4e42b5f4e9b6a2a7b7efed8)
Change-Id: I6e86781330c0cf83631e496337c4b5f29a012b65
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: Add host FSI description
Vijay Khemka (3):
drivers: ipmi: Support for both IPMB Req and Resp
drivers: ipmi: Support raw i2c packet in IPMB
drivers: ipmi: Modify max length of IPMB packet
(From meta-aspeed rev: 50412aa4f96d20200140451aa0357f2d4017f40a)
Change-Id: Id976f0c9c3c0a488d4e756ebf4d93e678dad7fec
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.8 stable release.
(From meta-aspeed rev: c04542140556963e58b0dab3dace24d429f622dc)
Change-Id: I400e60f6cbc12a79e8621e874db41fdc3d816e31
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Brandon Wyman (1):
ARM: dts: aspeed: rainier: Fix fan fault and presence
Joel Stanley (5):
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
(From meta-aspeed rev: 3be097fea0f324227c890b58c50148316c8eae9d)
Change-Id: I85613c9929c2aabb02cf0f474d57fd8eb8d8c2f6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.5, 5.4.6 and 5.4.7
stable releases.
(From meta-aspeed rev: 97f7573559d0616aad7ca22c4355cbe08156311d)
Change-Id: I4bd32bea1378408234806129171a18cddc333ed7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
peci: Fix function declaration
Jim Wright (3):
dt-bindings: hwmon/pmbus: Add ti, ucd90320 power sequencer
hwmon: Add support for UCD90320 Power Sequencer
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
(From meta-aspeed rev: 744ebe8b97e094432fcc9e1c4db968e5dc1b6b0f)
Change-Id: I721c2d444ab746a927ea800686f63bfac9138aa4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This moves the OpenBMC kernel to a Linux v5.4 base.
There are 161 patches in dev-5.4. Of these 69 are backported from
upstream, leaving 92 out of tree patches.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (12):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
Arnd Bergmann (1):
ARM: aspeed: ast2500 is ARMv6K
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (21):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (5):
i2c: aspeed: Add AST2600 compatible
hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
hwmon: (pmbus/ibm-cffps) Fix LED blink behavior
hwmon: (pmbus/ibm-cffps) Add version detection capability
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (13):
ARM: dts: aspeed: peci: Add PECI node
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (9):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed: ast2600evb: Enable FSI master
usb: gadget: Quieten gadget config message
clocksource: fttmr010: Parametrise shutdown
clocksource: fttmr010: Set interrupt and shutdown
clocksource: fttmr010: Add support for ast2600
watchdog: aspeed: Fix clock behaviour for ast2600
ARM: config: aspeed: Update defconfigs
Revert "ARM: dts: aspeed: peci: Add PECI node"
Johnny Huang (6):
pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config
pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux
pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file
pinctrl: aspeed: Use masks to describe pinconf bitfields
pinctrl: aspeed-g6: Add AST2600 pinconf support
Tali Perry (2):
dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation
i2c: npcm: Add Nuvoton NPCM I2C controller driver
Tomer Maimon (12):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree
dt-bindings: peci: add NPCM PECI documentation
ARM: dts: npcm7xx: Add PECI node
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 6d863dd22836673ccd2a5d40778a3d5e4e03d7ea)
Change-Id: I8f43925375c26bc88f94eee13430fcb03252b8ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.12, 5.3.13, 5.3.14 and
5.3.15 stable releases.
This is the final 5.3 bump. The openbmc kernel will now move to 5.4.
(From meta-aspeed rev: d3ba96954bb98db97c4c4bc2df730c547f17a391)
Change-Id: I3e3d4d3d1456bd00f91705a52eb1801fc6293168
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
i2c: aspeed: Prevent state corruption for IRQ with no status
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
(From meta-aspeed rev: 1dd494c9cdf700c0d0798412e93fef106512994d)
Change-Id: If896243ce9c0d58948e7882ab9dbe5257608c997
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.11 stable release.
(From meta-aspeed rev: 600115a9ea0f149133aa57fb74e1df85de5f539a)
Change-Id: I2c77fd292ed926f040fd84b3f4185a4745ba18e0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (4):
hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call
hwmon: (pmbus/ibm-cffps) Fix LED blink behavior
hwmon: (pmbus/ibm-cffps) Add version detection capability
ARM: dts: aspeed: rainier: Switch PSUs to unknown version
(From meta-aspeed rev: 550a844a351d7ea7839be2694183494704135ac0)
Change-Id: I993055b81988301100f6caf4ec4807a08d56f07a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.9 and 5.3.10 stable
releases.
(From meta-aspeed rev: f9f133f38f91fa0dec84231d3adb218107ca95b9)
Change-Id: Ida28b36e9f23c4499396f5c71024590823d556d5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (2):
ARM: dts: aspeed: ast2600evb: Enable i2c buses
watchdog: aspeed: Fix clock behaviour for ast2600
(From meta-aspeed rev: 66f4afb68e1d595e5d9ed71d2a117c9997875273)
Change-Id: If5a825dcb180c47271f77e14a8752923f4dd2507
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (4):
ARM: dts: aspeed-g6: Add timer description
clocksource: fttmr010: Parametrise shutdown
clocksource: fttmr010: Set interrupt and shutdown
clocksource: fttmr010: Add support for ast2600
(From meta-aspeed rev: 1ceef9cd25228b5a24999ba0219450c6dce9b094)
Change-Id: I3c7c2ea9e48a732241a1123b1b86bb7ef1b6c669
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (2):
fsi: aspeed: Fix OPB0 byte order register values
trace: fsi: Print transfer size unsigned
Joel Stanley (8):
fsi: aspeed: Implement byte and half word writes
fsi: aspeed: Implement byte and half word reads
fsi: move defines to common header
fsi: aspeed: Fix types in debugfs
fsi: aspeed: Fix link enable
fsi: aspeed: Fix whitespace in check_errors
fsi: aspeed: Use defines for port reset
fsi: aspeed: Clean up defines and documentation
(From meta-aspeed rev: 0ee4f43eb4d886802161e70891b44093376c3985)
Change-Id: I999c1c0437ee501a0c38808763a7137b67af7c2a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Benjamin Herrenschmidt (1):
net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum
Brandon Wyman (1):
ARM: dts: aspeed: rainier: gpio-keys for PSU presence
Jinu Thomas (1):
ARM: dts: aspeed: rainier: Fix i2c eeprom size
(From meta-aspeed rev: a630d667ca26dc6e851062e94ac9690e40b21c17)
Change-Id: Iad580235e816ef5ed989f9940e789a02b591a8e7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.8 stable release.
(From meta-aspeed rev: 31ca43512e524cc22b7b4bfb23c5307839043207)
Change-Id: I1c8099434f960384782339a5a6f5ace48e95d6b1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jeremy Kerr (1):
fsi: aspeed: Add clock debugfs file
Joel Stanley (8):
fsi: aspeed: Give read longer before timeout
fsi: aspeed: Add more registers to debug
fsi: aspeed: Busy loop in the write case
fsi: master: Change default divisor to 14
fsi: aspeed: Enable relative addressing
fsi: aspeed: Only select OPB0 once
fsi: aspeed: Avoid copying read data twice
fsi: aspeed: Pass fsi_master_aspeed insead of base
(From meta-aspeed rev: 0bf3d3a2b28adf528c45b4a04398b1ab16c4b286)
Change-Id: Ic35fee641adee65f7259ff190906cd4e68ac9205
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (4):
pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively
pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
ARM: dts: tacoma: Hog LPC pinmux
pinctrl: aspeed: Improve debug output
(From meta-aspeed rev: 64725b11caff553e1677dc90d8a630d07d04eaaa)
Change-Id: Ib3e405b0a3aebe7501b3505a86266201fe3219b0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.7 stable release.
(From meta-aspeed rev: 1a069d304738df04abb81cdc53661c67abf0581d)
Change-Id: If7b4410ba297fbf63c3f4aa861f138fb79cf449a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (1):
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
Joel Stanley (6):
ARM: dts: aspeed-g6: Add remaining UARTs
ARM: dts: aspeed: tacoma: Add UART1 and workaround
ARM: dts: ast2600evb: Enable UART workaround
ARM: dts: aspeed: tacoma: Add host FSI description
ARM: dts: aspeed: tacoma: Use 64MB for firmware memory
fsi: aspeed: Disable IPOLL
(From meta-aspeed rev: 0605807409ed3324931aca468e82abea3d163dec)
Change-Id: I43be15fa831dfcbdba77c66ac03eff8e7050bdc7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (3):
fsi: aspeed: Remove base from trace
fsi: aspeed: Add trace when error occurs
ARM: dts: aspeed-g6: Fix i2c clock source
(From meta-aspeed rev: 7db0a3de8d889fd0addfb6ed35d595ffda646c67)
Change-Id: I9bb353f263bea3168097cdb0ea16961e2d0bcb47
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.5 stable release.
(From meta-aspeed rev: e12735058c5043a9b635b8ec4a102e66b1fccc99)
Change-Id: I0f7710cffcf6957927ca0e01e7cb11d008b0cd40
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alexander Filippov (1):
ARM: dts: vesnin: Add power_green led
Andrew Jeffery (1):
ARM: dts: aspeed: Migrate away from aspeed, g[45].* compatibles
Eddie James (1):
fsi: aspeed: Add debugfs entries
(From meta-aspeed rev: 1711ea82efc783620a5f00720a8a8bf88494ceea)
Change-Id: I31d72a616ee0180353edd037241f42f1bfc4cb8e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (2):
ARM: dts: Aspeed: Tacoma: Add gpio-key definitions
ARM: dts: Aspeed: Tacoma: Add watchdog definitions
(From meta-aspeed rev: feb281f50d1867549272667deb56208e6eac8c35)
Change-Id: I3c32d038801413e11b71d326b61cb7c4e2737834
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.2, 5.3.3, 5.3.4 and
5.3.5 stable releases.
(From meta-aspeed rev: 050d1393f2b8254958a069e20ac135e93ce03a19)
Change-Id: Idbde30a1ed0cd57e7abd7906095e9ab5f8a080e4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (5):
clk: ast2600: Fix enabling of clocks
ARM: dts: aspeed-g6: Add VUART descriptions
ARM: dts: aspeed: tacoma: Enable VUART1
ARM: dts: tacoma: Remove incorrect i2c buses
ARM: dts: tacoma: Enable LPC Firmware region
(From meta-aspeed rev: 5463a8aefd99c9302d6bf40380265c2822a3b9e1)
Change-Id: If912f33a59f4d4c65fbd82421ce268803972790c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (1):
ARM: dts: aspeed: tacoma: Enable iBT device
Joel Stanley (1):
usb: gadget: Quieten gadget config message
(From meta-aspeed rev: 5d1af51495b016e385a6a2164d38770939226f11)
Change-Id: I78a4267d9a974b640acd07f5388e5885194cadf9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cédric Le Goater (3):
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
ARM: dts: aspeed: tacoma: Re-enable CS1
Ivan Mikhaylov (1):
watchdog: aspeed: add support for dual boot
(From meta-aspeed rev: 3369549492bf6b40f90cf14381ffc35e66250639)
Change-Id: Ia95b3ba3f1ba8a12d99660a458eb54cd2b1ddf73
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
pinctrl: aspeed-g6: Sort pins for sanity
pinctrl: aspeed-g6: Fix I2C14 SDA description
ARM: dts: aspeed-g6: Fix EMMC function in pinctrl dtsi
ARM: dts: aspeed-g6: Add pinctrl properties to MDIO nodes
ARM: dts: ast2600-evb: Add pinmux properties for enabled MACs
ARM: dts: aspeed-g6: Add missing pinctrl-names property to I2C nodes
Johnny Huang (9):
pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration
pinctrl: aspeed-g6: Fix UART13 group pinmux
pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups
pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config
pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux
pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper
pinctrl: aspeed: Move aspeed_pin_config_map to separate source file
pinctrl: aspeed: Use masks to describe pinconf bitfields
pinctrl: aspeed-g6: Add AST2600 pinconf support
(From meta-aspeed rev: 804acc0d24767e150f25b56379c9664cafdd4b37)
Change-Id: I8255855478addca2b659d318e7e6e8eb970608b4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
dt-bindings: clock: Add AST2500 RMII RCLK definitions
dt-bindings: clock: Add AST2600 RMII RCLK gate definitions
clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
clk: ast2600: Add RMII RCLK gates for all four MACs
net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs
ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces
Brad Bishop (9):
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
ARM: dts: aspeed-g6: Add lpc devices
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
ARM: dts: Add 128MiB OpenBMC flash layout
ARM: dts: aspeed: Add Rainier system
ARM: dts: aspeed: rainier: Add mac devices
ARM: dts: aspeed: rainier: Add i2c devices
Cédric Le Goater (12):
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
ARM: dts: aspeed-g6: Add FMC and SPI devices
ARM: dts: aspeed: rainier: Enable FMC and SPI devices
ARM: dts: ast2600-evb: Enable FMC and SPI devices
Joel Stanley (3):
ARM: dts: aspeed: tacoma: Enable FMC and SPI devices
ARM: dts: aspeed: ast2600evb: Use custom flash layout
ARM: dts: aspeed: tacoma: Disable CS1 as it is broken
(From meta-aspeed rev: 6f2dd84f3f30c9777ce956d5ad56de7d04bb227c)
Change-Id: I774fa833665c5d84cf58df5cd7315cadaf56754b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.3.1 stable release.
(From meta-aspeed rev: 601bad88ec3dd368bd48ffd16dc1a19519d50365)
Change-Id: Ifd55c6d0f6cbb8f7c992023856fb5975ac86bb0f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Arnd Bergmann (1):
ARM: aspeed: ast2500 is ARMv6K
Chicago Duan (1):
ARM: dts: aspeed: fp5280g2: Add LED configuration
Jeremy Kerr (3):
fsi: Add fsi-master class
fsi: Move master attributes to fsi-master class
fsi: Add temporary compatibility symlink
(From meta-aspeed rev: c42949991735030039a12243ec8f4e04f4704184)
Change-Id: I3ff25be7aadce0b52d5a3824f36ae4ecccaefc85
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This moves the OpenBMC kernel to a Linux v5.3 base.
There are 120 patches in dev-5.3. Of these, 56 are backported from
upstream, leaving 64 out of tree patches.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (26):
ARM: dts: aspeed: Describe SD controllers
ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB
ARM: dts: aspeed: Add AST2600 pinmux nodes
net: phy: Add mdio-aspeed
net: ftgmac100: Add support for DT phy-handle property
net: ftgmac100: Select ASPEED MDIO driver for the AST2600
pinctrl: aspeed: Rename pin declaration macros
pinctrl: aspeed: Add PIN_DECL_3() helper
pinctrl: aspeed: Add multiple pin group support for functions
pinctrl: aspeed: Add SIG_DESC_CLEAR() helper
pinctrl: aspeed: Add AST2600 pinmux support
pinctrl: aspeed: Document existence of deprecated compatibles
mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller
mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock
mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
ARM: dts: ast2600-evb: eMMC configuration
Andrew Peng (1):
ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC
Ben Pai (1):
ARM: dts: aspeed: Add Mihawk BMC platform
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
David S. Miller (1):
ftgmac100: Fix build.
Eddie James (4):
ARM: dts: aspeed: swift: Change power supplies to version 2
pmbus: (ibm-cffps) Add support for version 2 of the PSU
i2c: aspeed: Add AST2600 compatible
ARM: dts: aspeed: tacoma: Enable I2C busses
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Hongwei Zhang (1):
ARM: dts: aspeed: Add SGPM pinmux
Ivan Mikhaylov (2):
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
Jae Hyun Yoo (11):
dt-bindings: Add a document of PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Joel Stanley (19):
ARM: aspeed: Select timer in each SoC
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Enable SMP boot
ARM: configs: aspeed: Refresh defconfigs
ARM: configs: aspeed_g5: Enable AST2600
ARM: dts: aspeed: swift: Add eMMC device
ARM: dts: aspeed-g4: Add all flash chips
ARM; dts: aspeed: mihawk: File should not be executable
clk: aspeed: Add SDIO gate
clk: aspeed: Move structures to header
clk: Add support for AST2600 SoC
ARM: dts: aspeed: Add AST2600 and EVB
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
fsi: Add ast2600 master driver
ARM: dts: aspeed-g6: Describe FSI masters
ARM: dts: aspeed: ast2600evb: Enable FSI master
ARM: dts: aspeed: Add Tacoma machine
ARM: config: aspeed: Update defconfigs
ARM: dts: aspeed-g6: Add i2c buses
John Wang (1):
ARM: dts: aspeed: fp5280g2: Fix power supply address
Linus Walleij (3):
gpio: aspeed: Pass irqchip when adding gpiochip
gpio: tqmx86: Pass irqchip when adding gpiochip
gpio: Initialize the irqchip valid_mask with a callback
Matt Spinler (1):
ARM: dts: aspeed: swift: Fix FSI GPIOs
Nathan Chancellor (1):
pinctrl: aspeed: g6: Remove const specifier from aspeed_g6_sig_expr_set's ctx parameter
Oscar A Perez (1):
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
Rashmica Gupta (5):
gpio/aspeed: Fix incorrect number of banks
gpio: aspeed: Setup irqchip dynamically
gpio: aspeed: Use ngpio property from device tree if available
gpio: aspeed: Add in ast2600 details to Aspeed driver
ARM: dts: aspeed-g6: Add gpio devices
Ryan Chen (1):
watchdog: aspeed: Add support for AST2600
Tao Ren (3):
ARM: dts: aspeed: Add Facebook Minipack BMC
ARM: dts: aspeed: Add Facebook Wedge40 BMC
ARM: dts: aspeed: Add Facebook Wedge100 BMC
Tomer Maimon (15):
dt-binding: spi: add NPCM FIU controller
spi: npcm-fiu: add NPCM FIU controller driver
clk: nuvoton: add npcm750 clock function prototype initialization
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (3):
ARM: dts: aspeed: tiogapass: Add VR devices
ARM: dts: aspeed: tiogapass: Move battery sensor
ARM: dts: aspeed: tiogapass: Add Riser card
Wei Yongjun (1):
mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()
William A. Kennington III (1):
ARM: configs: aspeed: Enable commonly used network functionality
(From meta-aspeed rev: cacd5220e022dbe97ce6679838407565ed5f5df5)
Change-Id: Ic30ef008a68198c0e0c5a3764b356b7f7c59b2db
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Linus Walleij (1):
gpio: aspeed: Pass irqchip when adding gpiochip
Rashmica Gupta (6):
gpio/aspeed: Fix incorrect number of banks
dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers
gpio/aspeed: Setup irqchip dynamically
gpio/aspeed: Use ngpio property from device tree if available
gpio: Add in ast2600 details to Aspeed driver
ARM: dts: aspeed-g6: Add gpio devices
(From meta-aspeed rev: 3b101c7f2c10b43576e2770bc2eceb860d0f5660)
Change-Id: I56b71ef33fc6c941fedc8823cd1c9a3ea135e82c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.12, 5.2.13 and 5.2.14
stable releases.
(From meta-aspeed rev: 00d55503b465963ef43b7a52dc05c93ce1cec078)
Change-Id: I03164c88f5fe1da9c4ea2bc0b12a3245f74cdab0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (2):
ARM: dts: aspeed: swift: Change power supplies to version 2
pmbus: (ibm-cffps) Add support for version 2 of the PSU
Ivan Mikhaylov (2):
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
Joel Stanley (2):
ARM: dts: aspeed-g4: Add all flash chips
ARM; dts: aspeed: mihawk: File should not be executable
Oscar A Perez (1):
ARM: dts: aspeed-g5: Fix gpio-ranges upper limit
(From meta-aspeed rev: ad85989273a1e9f934f17433959d04f7f13b354f)
Change-Id: I3759b4fff70cc45f46eaf0c023888ac9bbfe0316
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.9, 5.2.10 and 5.2.11
stable releases.
(From meta-aspeed rev: 796411974f82c42b7af53b15bc99a7c27cf7605c)
Change-Id: Iddbea8fd2def7ccb4fc9bd1520c3b67d63f8b7eb
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
pinctrl: aspeed: Fix spurious mux failures on the AST2500
mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock
mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
ARM: dts: ast2600-evb: eMMC configuration
mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
Joel Stanley (1):
ARM: dts: aspeed: Add Tacoma machine
Wei Yongjun (1):
mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()
(From meta-aspeed rev: 02f7b82e4a48b109d49633358a7d306d9f9efaf8)
Change-Id: I31d6b9b91c8845ffb15fbb43d7503d3ee5ac54da
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|