Age | Commit message (Collapse) | Author | Files | Lines |
|
This moves the OpenBMC kernel to a Linux v5.3 base.
There are 120 patches in dev-5.3. Of these, 56 are backported from
upstream, leaving 64 out of tree patches.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (26):
ARM: dts: aspeed: Describe SD controllers
ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB
ARM: dts: aspeed: Add AST2600 pinmux nodes
net: phy: Add mdio-aspeed
net: ftgmac100: Add support for DT phy-handle property
net: ftgmac100: Select ASPEED MDIO driver for the AST2600
pinctrl: aspeed: Rename pin declaration macros
pinctrl: aspeed: Add PIN_DECL_3() helper
pinctrl: aspeed: Add multiple pin group support for functions
pinctrl: aspeed: Add SIG_DESC_CLEAR() helper
pinctrl: aspeed: Add AST2600 pinmux support
pinctrl: aspeed: Document existence of deprecated compatibles
mmc: sdhci-of-aspeed: Add support for the ASPEED SD controller
mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock
mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
ARM: dts: ast2600-evb: eMMC configuration
Andrew Peng (1):
ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC
Ben Pai (1):
ARM: dts: aspeed: Add Mihawk BMC platform
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
David S. Miller (1):
ftgmac100: Fix build.
Eddie James (4):
ARM: dts: aspeed: swift: Change power supplies to version 2
pmbus: (ibm-cffps) Add support for version 2 of the PSU
i2c: aspeed: Add AST2600 compatible
ARM: dts: aspeed: tacoma: Enable I2C busses
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Hongwei Zhang (1):
ARM: dts: aspeed: Add SGPM pinmux
Ivan Mikhaylov (2):
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
Jae Hyun Yoo (11):
dt-bindings: Add a document of PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Joel Stanley (19):
ARM: aspeed: Select timer in each SoC
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Enable SMP boot
ARM: configs: aspeed: Refresh defconfigs
ARM: configs: aspeed_g5: Enable AST2600
ARM: dts: aspeed: swift: Add eMMC device
ARM: dts: aspeed-g4: Add all flash chips
ARM; dts: aspeed: mihawk: File should not be executable
clk: aspeed: Add SDIO gate
clk: aspeed: Move structures to header
clk: Add support for AST2600 SoC
ARM: dts: aspeed: Add AST2600 and EVB
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
fsi: Add ast2600 master driver
ARM: dts: aspeed-g6: Describe FSI masters
ARM: dts: aspeed: ast2600evb: Enable FSI master
ARM: dts: aspeed: Add Tacoma machine
ARM: config: aspeed: Update defconfigs
ARM: dts: aspeed-g6: Add i2c buses
John Wang (1):
ARM: dts: aspeed: fp5280g2: Fix power supply address
Linus Walleij (3):
gpio: aspeed: Pass irqchip when adding gpiochip
gpio: tqmx86: Pass irqchip when adding gpiochip
gpio: Initialize the irqchip valid_mask with a callback
Matt Spinler (1):
ARM: dts: aspeed: swift: Fix FSI GPIOs
Nathan Chancellor (1):
pinctrl: aspeed: g6: Remove const specifier from aspeed_g6_sig_expr_set's ctx parameter
Oscar A Perez (1):
ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
Rashmica Gupta (5):
gpio/aspeed: Fix incorrect number of banks
gpio: aspeed: Setup irqchip dynamically
gpio: aspeed: Use ngpio property from device tree if available
gpio: aspeed: Add in ast2600 details to Aspeed driver
ARM: dts: aspeed-g6: Add gpio devices
Ryan Chen (1):
watchdog: aspeed: Add support for AST2600
Tao Ren (3):
ARM: dts: aspeed: Add Facebook Minipack BMC
ARM: dts: aspeed: Add Facebook Wedge40 BMC
ARM: dts: aspeed: Add Facebook Wedge100 BMC
Tomer Maimon (15):
dt-binding: spi: add NPCM FIU controller
spi: npcm-fiu: add NPCM FIU controller driver
clk: nuvoton: add npcm750 clock function prototype initialization
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (3):
ARM: dts: aspeed: tiogapass: Add VR devices
ARM: dts: aspeed: tiogapass: Move battery sensor
ARM: dts: aspeed: tiogapass: Add Riser card
Wei Yongjun (1):
mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()
William A. Kennington III (1):
ARM: configs: aspeed: Enable commonly used network functionality
(From meta-aspeed rev: cacd5220e022dbe97ce6679838407565ed5f5df5)
Change-Id: Ic30ef008a68198c0e0c5a3764b356b7f7c59b2db
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Linus Walleij (1):
gpio: aspeed: Pass irqchip when adding gpiochip
Rashmica Gupta (6):
gpio/aspeed: Fix incorrect number of banks
dt-bindings: gpio: aspeed: Update documentation with ast2600 controllers
gpio/aspeed: Setup irqchip dynamically
gpio/aspeed: Use ngpio property from device tree if available
gpio: Add in ast2600 details to Aspeed driver
ARM: dts: aspeed-g6: Add gpio devices
(From meta-aspeed rev: 3b101c7f2c10b43576e2770bc2eceb860d0f5660)
Change-Id: I56b71ef33fc6c941fedc8823cd1c9a3ea135e82c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.12, 5.2.13 and 5.2.14
stable releases.
(From meta-aspeed rev: 00d55503b465963ef43b7a52dc05c93ce1cec078)
Change-Id: I03164c88f5fe1da9c4ea2bc0b12a3245f74cdab0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (2):
ARM: dts: aspeed: swift: Change power supplies to version 2
pmbus: (ibm-cffps) Add support for version 2 of the PSU
Ivan Mikhaylov (2):
ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
Joel Stanley (2):
ARM: dts: aspeed-g4: Add all flash chips
ARM; dts: aspeed: mihawk: File should not be executable
Oscar A Perez (1):
ARM: dts: aspeed-g5: Fix gpio-ranges upper limit
(From meta-aspeed rev: ad85989273a1e9f934f17433959d04f7f13b354f)
Change-Id: I3759b4fff70cc45f46eaf0c023888ac9bbfe0316
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.9, 5.2.10 and 5.2.11
stable releases.
(From meta-aspeed rev: 796411974f82c42b7af53b15bc99a7c27cf7605c)
Change-Id: Iddbea8fd2def7ccb4fc9bd1520c3b67d63f8b7eb
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (6):
pinctrl: aspeed: Fix spurious mux failures on the AST2500
mmc: sdhci-of-aspeed: Drop redundant assignment to host->clock
mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
ARM: dts: ast2600-evb: eMMC configuration
mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
Joel Stanley (1):
ARM: dts: aspeed: Add Tacoma machine
Wei Yongjun (1):
mmc: sdhci-of-aspeed: Fix return value check in aspeed_sdc_probe()
(From meta-aspeed rev: 02f7b82e4a48b109d49633358a7d306d9f9efaf8)
Change-Id: I31d6b9b91c8845ffb15fbb43d7503d3ee5ac54da
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (3):
net: phy: Add mdio-aspeed
net: ftgmac100: Add support for DT phy-handle property
net: ftgmac100: Select ASPEED MDIO driver for the AST2600
(From meta-aspeed rev: d43a9b7ca84706b6b62d287a9bbe1f64f956317a)
Change-Id: Ief9b513bbbadc0e868673c7d3b4595d64120939d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Andrew Jeffery (13):
dt-bindings: mmc: Document Aspeed SD controller
mmc: Add support for the ASPEED SD controller
ARM: dts: aspeed: Describe SD controllers
pinctrl: aspeed-g5: Delay acquisition of regmaps
pinctrl: aspeed: Rename pin declaration macros
pinctrl: aspeed: Add PIN_DECL_3() helper
pinctrl: aspeed: Add multiple pin group support for functions
pinctrl: aspeed: Add SIG_DESC_CLEAR() helper
pinctrl: aspeed: Add AST2600 pinmux support
pinctrl: aspeed-g6: Fix I2C14 function name typo
pinctrl: aspeed-g6: Fix mislabeled PWM groups and functions
pinctrl: aspeed-g6: Add EMMC pin group
ARM: dts: aspeed: Add AST2600 pinmux nodes
Joel Stanley (12):
ARM: dts: aspeed: swift: Add eMMC device
dt-bindings: watchdog: Add ast2600 compatible
clk: aspeed: Move structures to header
clk: Add support for AST2600 SoC
ARM: aspeed: Select timer in each SoC
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Enable SMP boot
ARM: dts: aspeed: Add AST2600 and EVB
ARM: configs: aspeed_g5: Enable AST2600
fsi: Add ast2600 master driver
ARM: dts: aspeed-g6: Describe FSI masters
ARM: dts: aspeed: ast2600evb: Enable FSI master
Ryan Chen (1):
watchdog: aspeed: Add support for AST2600
YueHaibing (1):
pinctrl: aspeed: Make aspeed_pinmux_ips static
(From meta-aspeed rev: 40df7ebc32ddecc28126c3726c79b25fe1b0feb2)
Change-Id: I005c90c8106f3857e45ada4ac93456b3665b20b3
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.9 stable release.
(From meta-aspeed rev: 1c40bb93826342f5cc5548c1138ddd5cceec4082)
Change-Id: If328eb95f450f4932fb21375b44669a77aa7bf73
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
fsi: scom: Don't abort operations for minor errors
John Wang (1):
ARM: dts: aspeed: fp5280g2: Fix power-supply addr
(From meta-aspeed rev: e2e31bef2b742610e6174d0fe31df3667a6a6a00)
Change-Id: If24b279669c7a57dc2e632fa63df77cbdd0df08d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.8 stable release.
(From meta-aspeed rev: ed265fd68672f724273fee1f40fe491dc864a9cb)
Change-Id: Ifdb7f5c68f8175d69bd2c3716a240b0eb70d485d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Ben Pai (1):
ARM: dts: aspeed: Add Mihawk BMC platform
(From meta-aspeed rev: 5d8277353761c4c371ff2512e5f4bebf0487f35a)
Change-Id: I924f0479d58e544c04fd30bc1cd2da2a472f8ef7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.2 through to 5.2.7
stable releases.
(From meta-aspeed rev: 69309da3d90ad2adb3daaffe848c3c34b783a760)
Change-Id: I8a74bf7227b6c262973f874f62f1ca387c987b15
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.2.1 stable release.
The i2c fix removes is required to support existing Qemu models, as we
do not yet have buffer mode support in qemu.
Joel Stanley (2):
i2c: aspeed: Update to v3 of buffer and dma support
Revert "ARM: dts: aspeed: add I2C buffer mode support"
Matt Spinler (1):
ARM: dts: aspeed: swift: Fix FSI GPIOs
(From meta-aspeed rev: 514754f760977d44f1131d908e4755c846f61745)
Change-Id: Ie618b11b4cdea5a73d79eaefa0bb5b1adc55a05f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates OpenBMC to the upstream v5.2 release. There are 100 patches
carried in the openbmc tree, 58 of which are staged for inclusion in
5.3.
Adriana Kobylak (2):
ARM: dts: aspeed: Add Swift BMC machine
ARM: dts: aspeed: swift: Add pca9539 devices
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Alexander Filippov (1):
ARM: dts: aspeed: Add YADRO VESNIN BMC
Alexander Soldatov (1):
hwmon (occ): Add temp sensor value check
Andrew Jeffery (16):
dt-bindings: pinctrl: aspeed: Split bindings document in two
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
MAINTAINERS: Add entry for ASPEED pinctrl drivers
pinctrl: aspeed: Correct comment that is no longer true
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Add implementation-related documentation
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Andrew Peng (1):
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (4):
ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
iio: dps310: Add pressure sensing capability
OCC: FSI and hwmon: Add sequence numbering
fsi: sbefifo: Don't fail operations when in SBE IPL state
Fran Hsu (4):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Hongwei Zhang (1):
ARM: dts: aspeed: Add Microsoft Olympus BMC
Jae Hyun Yoo (22):
media: aspeed: fix a kernel warning on clk control
media: aspeed: refine clock control logic
media: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
media: aspeed: remove source buffer allocation before mode detection
media: aspeed: use different delays for triggering VE H/W reset
media: aspeed: add a workaround to fix a silicon bug
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Jeremy Kerr (1):
fsi/core: Fix error paths on CFAM init
Joel Stanley (5):
ARM: dts: aspeed: Rename flash-controller nodes
iio: Add driver for Infineon DPS310
soc: aspeed: lpc-ctrl: Fix probe error handling
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: config: aspeed: Update defconfigs
John Wang (1):
ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
Lei YU (1):
hwmon (occ): Fix division by zero issue
Maxim Sloyko (1):
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
Oliver O'Halloran (1):
i2c: fsi: Create busses for all ports
Patrick Venture (2):
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
Tao Ren (2):
ARM: dts: aspeed: cmm: enable ehci host controllers
ARM: dts: aspeed: Add Facebook YAMP BMC
Tomer Maimon (15):
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (1):
soc: aspeed: lpc-ctrl: make parameter optional
(From meta-aspeed rev: a83505d583b46be0523db03bf5bfdff2a5f6df9f)
Change-Id: I0b5ee194f658657230ab1bf880990157f15dde09
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.16 stable release.
(From meta-aspeed rev: 1f6f2db032b5e1d0bae6097bbccd8fd11f2d52c1)
Change-Id: I4714d488a1db5d5f1a4287762b1d4f15402de1de
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Two bug fixes for fsi, and some cleanups for pinctrl.
Andrew Jeffery (8):
dt-bindings: pinctrl: aspeed: Split bindings document in two
dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
MAINTAINERS: Add entry for ASPEED pinctrl drivers
pinctrl: aspeed: Correct comment that is no longer true
pinctrl: aspeed: Clarify comment about strapping W1C
pinctrl: aspeed: Split out pinmux from general pinctrl
pinctrl: aspeed: Add implementation-related documentation
Eddie James (1):
OCC: FSI and hwmon: Add sequence numbering
Jeremy Kerr (1):
fsi/core: Fix error paths on CFAM init
(From meta-aspeed rev: 5376bea182380b45a1ddacff82fbdd7d738e372a)
Change-Id: I864f55798c4f625594bf0370f2b2827de1c7117e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.13, 5.1.14 and 5.1.15
stable releases.
(From meta-aspeed rev: ca8fb5cd88aeae5a7c3215523638bb31d857e81a)
Change-Id: Ie0a817513543ae6d20106f72ee2c097b37aab123
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.12 stable release.
(From meta-aspeed rev: e3e55be11ab1fcdb83635eb2e4dbf71edf9dd8cc)
Change-Id: Id88b33542d6ac9fe344733d68c1f7a3e0d1e11cb
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
John Wang (1):
ARM: dts: aspeed: fp5280g2: Fix gpio-keys key code
(From meta-aspeed rev: 489a80ff3e8d4d325cc3a52496d507fadfb78814)
Change-Id: I176cfb737cbf3ad4479180c11e521b749360a06b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.10 and 5.1.11 stable
releases.
(From meta-aspeed rev: 52b2c1e3e91a79898907256114dbe5b614a6a301)
Change-Id: Ib028853aee6825cada0e8a709f2523b75ae17994
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
John Wang (1):
ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
Tao Ren (1):
ARM: dts: aspeed: Add Facebook YAMP BMC
(From meta-aspeed rev: 6c800dad240d943c5b92f054525de3bc15bdd857)
Change-Id: Ifb3c2d707a1a319a2f932b914e06ecd10a880a1e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (2):
fsi: sbefifo: Don't fail operations when in SBE IPL state
iio: dps310: Add pressure sensing capability
Jae Hyun Yoo (1):
media: aspeed: add a workaround to fix a silicon bug
Joel Stanley (1):
iio: dps310: Add changes following upstreaming
Oliver O'Halloran (1):
i2c: fsi: Create busses for all ports
(From meta-aspeed rev: cb57f16315255438fd265816a31f607698913f49)
Change-Id: I40c252f3d003faa8354b58fd0c693dfa31f57354
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.8 and 5.1.9 stable
releases.
(From meta-aspeed rev: c774792b8c027409f945f030e286164e8d567f44)
Change-Id: Ibb858660e66746122f0d59c237cc60e3fa87e5e4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.7 stable release.
(From meta-aspeed rev: 7106f127ea35b485066176178b06bcf8490f5ddb)
Change-Id: I362b575dc184ac0d425c5b30fc3495fde53effae
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Alexander Filippov (1):
ARM: dts: aspeed: Add YADRO VESNIN BMC
Jae Hyun Yoo (2):
media: aspeed: remove source buffer allocation before mode detection
media: aspeed: use different delays for triggering VE H/W reset
(From meta-aspeed rev: 0741eb2bdf9d839d780e1c45d202c3cfd7622646)
Change-Id: Ifef4fce604794dbc0b619ec72c1c76f0d372a445
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.6 stable release.
(From meta-aspeed rev: cb93206488f791d96259409d2508d0d4fa793ce5)
Change-Id: Ief05719fa2ce4b34c8288f4c2b6bc63943787157
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.4 and 5.1.5 stable
releases.
(From meta-aspeed rev: 2efadef883a81948264f48f5149617c4dbcf718b)
Change-Id: I622685753b1ae2b0c801b01dd9ceda263e5fb1ff
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Adriana Kobylak (2):
ARM: dts: aspeed: Add Swift BMC machine
ARM: dts: aspeed: swift: Add pca9539 devices
Hongwei Zhang (1):
ARM: dts: aspeed: Add Microsoft Olympus BMC
(From meta-aspeed rev: 04e3a44ed6490fec9106d7bd02c31325aec7ce25)
Change-Id: I6517ce6b333e57fcb9c74c5e1db399e1f4e5e0fe
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.2 and 5.1.3 stable
releases.
(From meta-aspeed rev: 32f57ecac705c2c142e968008f4b55f201e5a1b8)
Change-Id: I70e7ee0c2bb3aaea635e82461a9500739e1676b1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.1.1 stable release.
(From meta-aspeed rev: f07de9d2475ef003b99fefc2f270383eecad35fb)
Change-Id: I9e9e136a05624a4ab89e30ad6725809c9d1da0ce
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Current list of out-of-tree patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Alexander Soldatov (1):
hwmon (occ): Add temp sensor value check
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Andrew Peng (1):
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
Benjamin Fair (1):
net: npcm: use bitmap functions on link mode params
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (11):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (10):
ARM: dts: witherspoon: Enable vhub
media: platform: Aspeed: Remove use of reset line
media: platform: Aspeed: Make reserved memory optional
media: dt-bindings: aspeed-video: Add missing memory-region property
clk: Aspeed: Setup video engine clocking
ARM: dts: aspeed-g5: Add video engine
ARM: dts: witherspoon: Enable video engine
ARM: dts: romulus: Enable video engine
hwmon (occ): Store error condition for rate-limited polls
hwmon (occ): Prevent sysfs error attribute from returning error
Edward A. James (1):
ARM: dts: Aspeed: Witherspoon: Update BMC partitioning
Jae Hyun Yoo (19):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
media: platform: aspeed: fix a kernel warning on clk control
media: platform: aspeed: refine clock control logic
media: platform: aspeed: change irq to threaded irq
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
Joel Stanley (20):
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
ARM: config: aspeed-g5: Add video engine driver
ARM: dts: npcm: Remove use of skeleton.dtsi
dt-bindings: gpu: Add ASPEED GFX bindings document
drm: Add ASPEED GFX driver
drm: aspeed: Clean up Kconfig options
dt-bindings: rtc: Add on-chip ASPEED RTC documentation
rtc: Add ASPEED RTC driver
ARM: config: aspeed: Add P2A and EDAC drivers
ARM: config: aspeed-g5: Remove unused gadget drivers
ARM: config: aspeed-g5: Add ISL68137 and IR38064
Lei YU (2):
ARM: dts: palmetto: Fix flash_memory region
hwmon (occ): Fix extended status bits
Maxim Sloyko (3):
hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller
Patrick Venture (7):
ARM: dts: aspeed: zaius: Fix intersil compatibles
dt-bindings: misc: aspeed-p2a-ctrl: add support
drivers/misc: Add Aspeed P2A control driver
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
dt-bindings: Add ir38064 as a trivial device
dt-bindings: Add isl68137 as a trivial device
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
Tomer Maimon (18):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
dt-binding: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
ARM: dts: npcm7xx: Add PECI description
ARM: config: npcm7xx: Enable PECI driver
Vijay Khemka (1):
misc: aspeed-lpc-ctrl: make parameter optional
krzysztof.adamski@nokia.com (1):
pmbus: support for custom sysfs attributes
(From meta-aspeed rev: a1594746d761ae3fd57c8e8419c8129e78b6634a)
Change-Id: I83486a54d00afb6162ab1a3c9ee3a082241f109b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.12 and 5.0.13 stable
releases.
(From meta-aspeed rev: 92983db472260cb2e5a2eabf78e3a766658fe18d)
Change-Id: If234e2ed0ebf5851f22fc0c12e2b061eea7e2106
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.10 and 5.0.11 stable
releases.
(From meta-aspeed rev: fd07a439a27107425380e1b1c15dc29efecd93a8)
Change-Id: If7cd75859e961233589cb2f8aed3acb9f852b9c6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (4):
media: aspeed: remove IRQF_SHARED flag
media: aspeed: reduce noisy log printing outs
media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
media: aspeed: refine interrupt handling logic
Vijay Khemka (1):
misc: aspeed-lpc-ctrl: make parameter optional
(From meta-aspeed rev: c4a04dc04de86117c53f86fcddb85a4c9a48bda1)
Change-Id: I5c75249e84cde255e7e1cdecb99be9a74d0fe706
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.8 and 5.0.9 stable
releases.
(From meta-aspeed rev: cf86c821904e6dfaa71faa82b956e43ebb73ebdf)
Change-Id: I263dd3103fe284ec5726131201835b8a032ee7af
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (7):
dt-bindings: misc: aspeed-p2a-ctrl: add support
drivers/misc: Add Aspeed P2A control driver
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: quanta-q71: Enable p2a node
hwmon: (pmbus/isl68137): Remove default y in Kconfig
dt-bindings: Add ir38064 as a trivial device
dt-bindings: Add isl68137 as a trivial device
Robert Lippert (2):
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
(From meta-aspeed rev: ca37780a66f05676f4015b3b435536e68bb6a79d)
Change-Id: I67a6b885adc5649f27c0e386773d4fcbd62fb5e5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
meta-aspeed: c8d791ede6..35a494ecb3:
Andrew Jeffery (1):
linux-aspeed: OCC, ISL68137, ASPEED spi-nor updates
meta-ingrasys: 67bcaf389f..71846afdc6:
Patrick Venture (5):
meta-ingrasys: zaius: hwmon: udc90160 specify informative names
meta-ingrasys: zaius: enable isl68137 and ir38064
meta-ingrasys: zaius: phosphor-hwmon: add vrm nodes
meta-ingrasys: zaius: phosphor-hwmon: add power-brick nodes
meta-ingrasys: zaius: update ipmi sensor inventory
Robert Lippert (3):
meta-ingrasys: zaius: remove reflock fixup recipe
meta-ingrasys: zaius: avsbus-control: use linux driver instead of raw I2C commands
meta-ingrasys: zaius: no longer need to set VDN VOUT_MAX during host boot
Change-Id: I5dbcfae6f937e0f01e5fca4c1f686be0e82b7ee1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Cédric Le Goater (4):
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
Eddie James (2):
hwmon (occ): Store error condition for rate-limited polls
hwmon (occ): Prevent sysfs error attribute from returning error
Lei YU (1):
hwmon (occ): Fix extended status bits
(From meta-aspeed rev: c8d791ede6f895a8c8ed195ce1c9c2db9b0c7cd1)
Change-Id: I4d89695677bcc7b60abc0d75d809ee33c33df53c
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (2):
i2c: aspeed: Remove hard-coded bus timeout value setting
i2c: aspeed: Add multi-master use case support
Maxim Sloyko (1):
hwmon: (pmbus/ir38064): Add driver for Infineon IR38064 Voltage Regulator
(From meta-aspeed rev: d52d69399e0778bf2a306597a2f67dcd2dc36494)
Change-Id: I3f348ea1359f4d3441a2153b761eba3b4610460b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (3):
media: platform: aspeed: fix a kernel warning on clk control
media: platform: aspeed: refine clock control logic
media: platform: aspeed: change irq to threaded irq
Maxim Sloyko (1):
hwmon: (pmbus/isl68137): Add driver for Intersil ISL68137 PWM Controller
(From meta-aspeed rev: 937e0c7478021ffbce2d22f89c371f686053b48f)
Change-Id: I83a77671f73be174ba96e85314e3e3068e5d127c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.7 stable release.
(From meta-aspeed rev: 9fe3ec3fa8953fd649b565b6333ceefc27129acf)
Change-Id: I91e08921ef797982a1a047b9573a643089add740
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
An atomic cross-layer update is required to do this - as such this
commit consists of these subtree commits, squashed:
meta-aspeed
linux-aspeed: Witherspoon flash layout, GFX DRM
meta-phosphor
aspeed: Remove Witherspoon DTS patch
Change-Id: I57d466163fdc5dc188424e7cade688779f15def0
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (7):
media: platform: Aspeed: Remove use of reset line
media: platform: Aspeed: Make reserved memory optional
media: dt-bindings: aspeed-video: Add missing memory-region property
clk: Aspeed: Setup video engine clocking
ARM: dts: aspeed-g5: Add video engine
ARM: dts: witherspoon: Enable video engine
ARM: dts: romulus: Enable video engine
Joel Stanley (1):
ARM: config: aspeed-g5: Add video engine driver
(From meta-aspeed rev: 462dc06e904d6d044ab86e9595bf8201dcc5996f)
Change-Id: I67c7818daaf4e02857dd110be4fec03e6fcb57f2
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.6 stable release.
(From meta-aspeed rev: bd303d5c639fe12df968f136ca27f5ae03d47b3f)
Change-Id: I585935fb70e537629f44041c5f436afb6f817725
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.5 stable release.
(From meta-aspeed rev: 60a1df8673ea0679cf9e0517a6cdd0a21447ba2a)
Change-Id: I3977ba92a656a1b781934bae9fc94d936da4d726
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
ARM: dts: witherspoon: Enable vhub
Wei Yongjun (1):
media: platform: Fix missing spin_lock_init()
(From meta-aspeed rev: e2a106eafe7c7d8b72fef3974f28b5da9872312c)
Change-Id: Ida706e64b15d11aca990556c0319898e4d48a4b3
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.0.4 stable release.
(From meta-aspeed rev: d9dc0f8226063e1b4c4b06cc78a83186af2001e9)
Change-Id: Ie8ccf4f8d7ffc8951fed09479b3ff4759389ae94
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Out of tree patches include 96 files changed, 18067 insertions and 144
deletions (most lines coming from Nuvoton patches, with the Nuvoton
device trees dominating).
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (7):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
Eddie James (1):
hwmon: occ: Fix power sensor indexing
Jae Hyun Yoo (12):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Joel Stanley (16):
iio: Add driver for Infineon DPS310
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
rtc: Add ASPEED RTC driver
dt-bindings: rtc: Add ASPEED description
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
Lei YU (1):
ARM: dts: palmetto: Fix flash_memory region
Mark Walton (1):
ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers
Tomer Maimon (16):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (3):
ARM: dts: aspeed: Add KCS support for LPC BMC
ARM: dts: aspeed: tiogapass: Enable KCS
ARM: dts: aspeed: tiogapass: Add sensors
(From meta-aspeed rev: 8c718fadc62f01741dbd435fd483c1169bdfc7c8)
Change-Id: Icb4e9cc213a90f9f605134e3c0a94c478fb3f19a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 4.19.28 and 4.19.29 stable
releases.
(From meta-aspeed rev: cf1135c947f613b514dcb8707e1620cdc17f21e1)
Change-Id: I14d6537c4fce4daffd1e2e571ded383ed8c14cee
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|