Age | Commit message (Collapse) | Author | Files | Lines |
|
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and
5.8.12 stable releases.
(From meta-aspeed rev: 20431851af835631f4cbe479d958f565ebef781b)
Change-Id: Ib6965a9176d578cbc5eda2384928f17584c6cddc
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (5):
hwmon: (pmbus) Expose PEC debugfs attribute
pinctrl: aspeed: Format pinconf debug consistent with pinmux
pinctrl: aspeed: Use the right pinconf mask
pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks
ARM: dts: rainier: Disable internal pull-downs on eMMC pins
(From meta-aspeed rev: c6a057b489fc7087f00abdbda682489e7a2e3318)
Change-Id: Ie4d9c5d6519e340fcd7cbca9a32d733f934a271f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.6, 5.8.7 and 5.8.8
stable releases.
(From meta-aspeed rev: 3bad2091835b6054b7ba1a2f016b9c125a1ce440)
Change-Id: I4a1c370c1760ab0a273a88c836289b83e5ee44ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Enable I2C slave mode in ast2500 and ast2600 kernel config.
Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device
ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device
(From meta-aspeed rev: 6204d930bc5b9df98192843227abac29946f75df)
Change-Id: I2b66eb5192fabb8562af2327ef5afe3ef3fc33d9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.1, 5.8.2, 5.8.3,
5.8.4 and 5.8.5 stable releases.
(From meta-aspeed rev: d70b397ee265c7cd3d6e4678b86009e9d7127446)
Change-Id: Ieb305bf268a1044f1682992c3e1e0153aac08747
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: Aspeed: Rainier: Enable XDMA engine
Vishwanatha Subbanna (2):
ARM: dts: aspeed: rainier: Add Operator Panel LEDs
ARM: dts: aspeed: rainier: Add directly controlled LEDs
(From meta-aspeed rev: f4c4262172c24e2727f51e6bc0518173fd45c0e4)
Change-Id: Iacca07cde2dceff014997ebcab980b7e65bce60a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Brad Bishop (4):
spi: fsi: Handle 9 to 15 byte transfers lengths
spi: fsi: Fix clock running too fast
spi: fsi: Fix use of the bneq+ sequencer instruction
eeprom: at25: Split reads into chunks and cap write size
Eddie James (3):
dt-bindings: fsi: fsi2spi: Document new restricted property
spi: fsi: Implement restricted size for certain controllers
spi: fsi: Check mux status before transfers
(From meta-aspeed rev: f4b7c1c8227d54a4b805479132b32227113c77d7)
Change-Id: I501829de26fba8d2bfd7440483015380192d2c50
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the OpenBMC kernel tree to a 5.8 base. It has beent two
weeks since the kernel was last updated, making it the quickest bump in
OpenBMC history.
There are 93 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs were updated to fix selection of video device. An
upstream reorganisation of the V4L kconfig resulted in a large number of
extra drivers enabled when all we required was VIDEO_ASPEED.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (13):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
Ben Tyner (1):
ARM: dts: aspeed: witherspoon-128: Remove checkstop GPIO from gpio-keys definitions
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (10):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
ARM: dts: aspeed: ast2600evb: Add MAC0
soc: aspeed-lpc-ctrl: Fix printf warning
ARM: configs: aspeed: Update defconfigs
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of video device
mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths"
ARM: aspeed: g5: Do not set sirq polarity
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 3c9616235643263beea47ef5db5cecafa3349c2e)
Change-Id: I4616f47026e00e49bda0abb1fc586dd2faabee30
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Somehow this was not enabled. It is required for Witherspoon 128, Tacoma
and Rainier.
(From meta-aspeed rev: a7bbd475453768037877c820caed02f39055eb6e)
Change-Id: Ie80479aa455c18c921387b23586cff3e7bc79204
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.11 and
5.7.12 stable releases.
(From meta-aspeed rev: ea33f9ced2354a75d8918a3c7e61ca56f67e21df)
Change-Id: Iaa9bd005a8897ab5e9a1148145c02d6fbb8603fa
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Tyner (1):
Remove checkstop GPIO from gpio-keys definitions
Eddie James (9):
mmc: sdhci-of-aspeed: Fix clock divider calculation
fsi: master: Add boolean parameter to link_enable function
fsi: core: Disable link when slave init fails
fsi: core: Set slave local bus ownership during init
ARM: dts: aspeed: rainier: Switch OCCs to P10
ARM: dts: aspeed: rainier: Enable EHCI controller
ARM: dts: Aspeed: tacoma: Enable EHCI controller
fsi: master: Remove link enable read-back
ARM: dts: aspeed: rainier: Add CFAM SPI controllers
Joel Stanley (2):
mmc: sdhci-of-aspeed: Revert "Prevent clock divider of zero"
ARM: dts: aspeed: rainier: Add FSI I2C masters
(From meta-aspeed rev: 4171a5eaa18f59cd4eef7d5dd1e7c8e548e2f78e)
Change-Id: I9aaf5fd3cbf6ba1ab7acf6dbc66588b6367f1049
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Some platforms make use of it.
(From meta-aspeed rev: 132487e2ee60e4b167c07fb63093e0ac493a3fbb)
Change-Id: I8752df5f9b4b195e605676a398cfdf1510b11008
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: dts: rainier: Describe GPIO mux on I2C3
Joachim Fenkes (2):
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
Joel Stanley (4):
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
fsi: aspeed: Support CFAM reset GPIO
ARM: dts: aspeed: rainier: Add CFAM reset GPIO
ARM: dts: aspeed: tacoma: Add CFAM reset GPIO
(From meta-aspeed rev: ee96b77b00dbbc7cbf598dde0008c2ba96eb8d28)
Change-Id: Ie73ef89d795e49a8f9bbef11261ae78d2b986e4a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.10 stable release.
(From meta-aspeed rev: 69ec802b7b04b61203c81778f695a9dad7a2d0d4)
Change-Id: I63b8b9773b0d49114e892bd0d57b95e6ad8cc516
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Joel Stanley (1):
spi-nor: Remove unused file
(From meta-aspeed rev: 7e2a5cd6ae49c669168c18e897d87e29a9b9244b)
Change-Id: I7489f4a9bc3e8018830956a019b0ad24c1cc2a7f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This updates the OpenBMC kernel tree to a 5.7 base. It has been three
releases since the kernel was updated, making it over 9 months of
development time. The stable releses up to v5.7.9 are integrated in this
bump.
There are 106 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs are regenerated with one change made to enable debugfs,
as it will default to off with the new kernel without explicitly
enabling it, and some platforms (eg Witherspoon) reply on it being
enabled.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (14):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (21):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
fsi: aspeed: Enable 23-bit addressing
clk: ast2600: Fix AHB clock divider for A1
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
ARM: dts: aspeed: rainier: Add second cfam on the hub
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
ARM: dts: aspeed: ast2600: Update XDMA engine node
ARM: dts: aspeed: ast2500: Update XDMA engine node
ARM: dts: aspeed: witherspoon: Enable XDMA engine
ARM: dts: aspeed: tacoma: Enable XDMA engine
clk: AST2600: Add mux for EMMC clock
mmc: sdhci-of-aspeed: Prevent clock divider of zero
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (13):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
fsi: aspeed: Support cabled FSI
fsi: aspeed: Run the bus at maximum speed
fsi: aspeed: Add module param for bus divisor
ARM: dts: aspeed: ast2600evb: Add MAC0
ARM: configs: aspeed: Update defconfigs
hwmon (peci-dmmtemp): Fix 'sizeof' warning
soc: aspeed-lpc-ctrl: Fix printf warning
Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions"
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: a1d8d7791b8257b85eb85d73f08c2961c8c94f16)
Change-Id: I84ae1a28349144db398b7a43e0a2951c1eee434d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Needed for SPI-attached eeproms.
(From meta-aspeed rev: b64781c123543c5cbfecb81d974e82716545b099)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: I5a931b742661d62790199afdd20dac5ef5935ad3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.45, 5.4.46, 5.4.47 and
5.4.48 stable releases.
(From meta-aspeed rev: c3bc610a79d6b35f6b3c1707c86ca89922a4fad5)
Change-Id: I2839dcb68dbb1ed011adf236352add86e7e50d09
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: aspeed: rainier: Add second cfam on the hub
Joel Stanley (1):
ARM: dts: aspeed: ast2600evb: Add MAC0
(From meta-aspeed rev: d13ebb3c7ca5dabd083bfa4d7dfa1897e9b77048)
Change-Id: I9b4b1e70b67f6017f736cac85f010c8f3a4ba69e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.44 stable release.
(From meta-aspeed rev: ec813222ab8916603ce96d76f99c967d6d67110b)
Change-Id: I911e44daeee1c8c507b744a002979cd82c5a114b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Pai (1):
ARM: dts: aspeed: mihawk: Add aliases for i2c and add thermal sensor
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Eddie James (5):
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: aspeed: xdma: Update to v11 upstream
soc: aspeed: xdma: Update to v11 upstream
ARM: dts: aspeed: Update XDMA to v11 upstream properties
(From meta-aspeed rev: 6b226ab7f77c76db68e3d9e70b0f1a5c1dde514d)
Change-Id: I272058c5e0dd5ca12b17379d1bf4f94f5a7ba290
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.40, 5.4.41, 5.4.42,
and 5.4.43 stable releases.
(From meta-aspeed rev: e491b87b48ae956b3b40cc93a1a4102a0841f8b1)
Change-Id: I23cc7318d2d28e6dff73ebf2fd4707702fe3c382
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.39 stable release.
It also includes a revert of the inital workaround for interrupt
behaviour on AST2600's I2C master as 5.4.39 contains an upstream fix.
Joel Stanley (1):
i2c: aspeed: Revert initial IRQ workaround
(From meta-aspeed rev: ac403399d5fbed4eba4a1587c9cfc2bb30cfd07a)
Change-Id: I84376e84e55ce22498442f3d24877805ec22c8d6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: System has one SPI NOR
(From meta-aspeed rev: 963da65de5c17145cf34c5bc82376cf3a67f4ae0)
Change-Id: I5e465b08a33cdecaf40cde0f024e88a7856b9728
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.33, 5.4.34, 5.4.35,
5.4.36, 5.4.37 and 5.4.38 stable releases.
(From meta-aspeed rev: 60604033e4584eee4958a8b025a4b51e13a99638)
Change-Id: I64558ff2aca67b1b9c75df026a496fb5a7308d67
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (2):
pinctrl: aspeed: Describe the heartbeat function on ball Y23
ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP
Eddie James (3):
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
(From meta-aspeed rev: 8b46bfecbdc8b22b1cb4b9441666b1345fc8dadf)
Change-Id: I86124c57eb821cc2bf268c110802946bac5d043e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Changbin Du (1):
perf: Make perf able to build with latest libbfd
Eddie James (2):
dt-bindings: fsi: Add FSI2SPI bindings
spi: Add FSI-attached SPI controller driver
Joel Stanley (1):
ARM: confisgs: aspeed_g5: Sync with OpenBMC
(From meta-aspeed rev: 29b354d091e668d00598d0ef05f070f73c91c0df)
Change-Id: I6fe69e32f460d0aeb41fe14b4e87ef95f6cb436e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (1):
ARM: dts: aspeed: rainier: Add gpio line names
Eddie James (1):
clk: ast2600: Fix AHB clock divider for A1
Joel Stanley (2):
fsi: aspeed: Run the bus at maximum speed
fsi: aspeed: Add module param for bus divisor
(From meta-aspeed rev: ae8c8b5c2c8db832831ad9291faf0b6ed8224379)
Change-Id: I5dd7d6a233969cb4bcb69ba65ce2ca7b334f8f5b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.28, 5.4.29, 5.4.30,
5.4.31 and 5.4.32 stable releases.
(From meta-aspeed rev: 03423fdeee77ec940bbafd7b049d4067e6fea80c)
Change-Id: I095a9fab81a0cad09f20324e27db12a690ca9b1a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The TPM TIS driver for I2C comes from v6 of the patchset on the
linux-integrity list[1], plus additional backports to support it on 5.4.
https://lore.kernel.org/linux-integrity/20200407162044.168890-1-amirmizi6@gmail.com/T/
Amir Mizinski (7):
tpm: tpm_tis: Make implementation of read16 read32 write32 optional
tpm: tpm_tis: Add check_data handle to tpm_tis_phy_ops
tpm: tpm_tis: rewrite "tpm_tis_req_canceled()"
tpm: tpm_tis: Fix expected bit handling and send all bytes in one shot without last byte in exception
tpm: Handle an exception for TPM Firmware Update mode.
dt-bindings: tpm: Add YAML schema for TPM TIS I2C options
tpm: tpm_tis: add tpm_tis_i2c driver
Andrew Jeffery (1):
ARM: dts: tacoma: Enable the second VUART
Eddie James (1):
ARM: dts: aspeed: tacoma: Add tpm
Sumit Garg (1):
tpm: Move tpm_buf code to include/linux/
(From meta-aspeed rev: 1aaea9d85026a6eda21dc9f817d4d0afa703d39e)
Change-Id: I294e61124bccd0a62a5f61d7d8624044fbf74b75
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This option is considered a security enhancement[1].
[1] https://lore.kernel.org/lkml/20200324153643.15527-11-will@kernel.org/
(From meta-aspeed rev: bc75bf104e650e38907265cb7d9396dfe3f599c0)
Change-Id: I35a4f9b63ac053dcfc3d22eb1b12b11019196f00
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (5):
fsi: aspeed: Enable 23-bit addressing
ARM: dts: aspeed: tacoma: Add iio-hwmon nodes for IIO devices
hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection
hwmon: (pmbus/ibm-cffps) Fix LED behavior again
soc: aspeed: xdma: Fix command buffer overrun
Joel Stanley (2):
ARM: dts: aspeed: rainier: Add VGA reserved memory region
ARM: dts: aspeed: raininer: Enable XDMA
(From meta-aspeed rev: 6e60548f439e07806f3089a611f801ac85238f0b)
Change-Id: I848095fb60f8a2e364e6ba939466cf834d3a31e3
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.27 and 5.4.28 stable
releases.
(From meta-aspeed rev: 048aaa997f7ade428154f4457cdf5b25e16f5f65)
Change-Id: I5abb494b6ab7acb5edf2060e568c7c580bf3ca24
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (3):
ARM: dts: tacoma: Add KCS node for LPC MCTP
ARM: dts: aspeed: romulus: Add gpio line names
ARM: dts: aspeed: zaius: Add gpio line names
Andrew Jeffery (2):
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
Eddie James (7):
ARM: dts: rainier: Add KCS node for LPC MCTP
soc: aspeed: xdma: Switch to reserved memory
dt-bindings: soc: xdma: Switch to reserved memory node
ARM: dts: aspeed: tacoma: Add reserved memory for XDMA
ARM: dts: aspeed: witherspoon: Add reserved memory for XDMA
ARM: dts: aspeed: ast2600: Set arch timer always-on
ARM: dts: Aspeed: Add witherspoon-128 machine
Joel Stanley (3):
ARM: dts: aspeed: tacoma: Add GPIOs for FSI
fsi: aspeed: Support cabled FSI
ARM: dts: aspeed: tacoma: Add line names
(From meta-aspeed rev: 22600b6fc6d6bdcf33407b7cf8d32b8c09a713e7)
Change-Id: I9251473c0a5b4601845d3c0d588b5a3bdb1d4f40
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
CONFIG_CRYPTO_ECHAINIV is default n so we don't need it in our config.
CONFIG_EDAC_ASPEED is not supported on AST2600.
(From meta-aspeed rev: 337c8064630d95aa7d7cc5d948bd99e72cfa3af8)
Change-Id: Ief0ebacbd2b9ed2d8f8dce7eb4c4828da0ae58d3
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
These are used by systemd to provide isolation features:
Required for IPAddressDeny= and IPAddressAllow= in resource control
unit settings
CONFIG_CGROUP_BPF
Required for PrivateNetwork= in service units:
CONFIG_NET_NS
Note that systemd-localed.service and other systemd units use
PrivateNetwork so this is effectively required.
Required for PrivateUsers= in service units:
CONFIG_USER_NS
(NET_NS is default y so we get it by enabling namespace support).
(From meta-aspeed rev: 5ad76c27abbb7d7e65c97bce6be63d7aa542a531)
Change-Id: I8e6311526393c663c62e310a465df9306251c021
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.24, 5.4.25 and 5.4.26
stable releases.
(From meta-aspeed rev: e9a99472750d69a0efdfe0277de48dd19dafb839)
Change-Id: I7d2721fde89ac7ad201b6418d9956d29adaea178
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (16):
dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller
irqchip: Add Aspeed SCU interrupt controller
ARM: dts: aspeed: ast2500: Add SCU interrupt controller
ARM: dts: aspeed: ast2600: Add SCU interrupt controllers
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
ARM: dts: aspeed: ast2500: Add XDMA Engine
ARM: dts: aspeed: ast2600: Add XDMA Engine
ARM: dts: aspeed: witherspoon: Enable XDMA Engine
ARM: dts: aspeed: tacoma: Enable XDMA engine
soc: aspeed: xdma: Add memory controller configuration
soc: aspeed: xdma: Add root complex reset
soc: aspeed: xdma: Disable PCI AHB bridge during probe
soc: aspeed: xdma: Fix BMC PCI device class and revision for AST2600
Guenter Roeck (1):
ARM: dts: aspeed: tacoma: Enable eMMC controller
Joel Stanley (1):
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
(From meta-aspeed rev: de4339cc7a300c65f129cc71ed5f8da367a504a1)
Change-Id: I233aa1eb763bb445b5a46c6762ea6b377bb378dd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.22 and 5.4.23 stable
releases.
(From meta-aspeed rev: c6e6f90361325121bd39400513c4b2b83ac4124a)
Change-Id: Id94badca45a5c0e83f082068b4c171cdde060eaf
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (1):
ARM: dts: aspeed: witherspoon: Add gpio line names
Andrew Jeffery (1):
ARM: dts: rainier: Enable VUART2
Ben Pai (1):
ARM: dts: mihawk: Change the name of leds
Jae Hyun Yoo (2):
peci: fix license identifier
hwmon: peci: change label strings to reflect natural numbers
Matthew Barth (1):
ARM: dts: rainier: Set PCA9552 pin types
(From meta-aspeed rev: 213765a9564783b0c5800a58865fea5525373e33)
Change-Id: I71bbef501e1e9c327cdc6c2647218d7ad686f399
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.17, 5.4.18, 5.4.19,
5.4.20 and 5.4.21 stable releases.
(From meta-aspeed rev: 99343a58cbdf1db7e28763be3111e1185d39fe2b)
Change-Id: I14386b65a7bc1b618cef17284f02b8a06c82831f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.12, 5.4.13, 5.4.14,
5.4.15 and 5.4.16 stable releases.
(From meta-aspeed rev: 55b7be3b1aaa0afe3282e17146f191a44e51b530)
Change-Id: I0ad7d464893f4e148993e234dfbfeba5e44ab380
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (1):
i2c: aspeed: Prevent state corruption for IRQ with no status
Matthew Barth (1):
ARM: dts: rainier: Remove regulators
Tao Ren (3):
usb: gadget: aspeed: read vhub config from of_device_id
usb: gadget: aspeed: add ast2600 vhub support
ARM: dts: aspeed-g6: add usb functions
(From meta-aspeed rev: 3275d96ddf674290e50332632a129dc743f9a89f)
Change-Id: I4cc6223f6167b2db830d77122bc142d2f9a074b6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.9, 5.4.10 and 5.4.11
stable releases.
(From meta-aspeed rev: 8333ab8d48605e261f671c6d0c8281c49846c489)
Change-Id: I83d06ebae33df4eb6ebe13b6f09bbc0e849c5cbb
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Eddie James (3):
hwmon: (pmbus/ibm-cffps) Add new manufacturer debugfs entries
hwmon: (pmbus/ibm-cffps) Add the VMON property for version 2
hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
Jae Hyun Yoo (1):
media: aspeed: refine hsync/vsync polarity setting logic
(From meta-aspeed rev: 28a36e4550477bf0b4e42b5f4e9b6a2a7b7efed8)
Change-Id: I6e86781330c0cf83631e496337c4b5f29a012b65
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: Add host FSI description
Vijay Khemka (3):
drivers: ipmi: Support for both IPMB Req and Resp
drivers: ipmi: Support raw i2c packet in IPMB
drivers: ipmi: Modify max length of IPMB packet
(From meta-aspeed rev: 50412aa4f96d20200140451aa0357f2d4017f40a)
Change-Id: Id976f0c9c3c0a488d4e756ebf4d93e678dad7fec
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.8 stable release.
(From meta-aspeed rev: c04542140556963e58b0dab3dace24d429f622dc)
Change-Id: I400e60f6cbc12a79e8621e874db41fdc3d816e31
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Brandon Wyman (1):
ARM: dts: aspeed: rainier: Fix fan fault and presence
Joel Stanley (5):
ARM: dts: aspeed: tacoma: Fix fsi master node
ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
ARM: dts: aspeed-g6: Fix FSI master location
ARM: dts: aspeed: rainier: Remove duplicate i2c busses
(From meta-aspeed rev: 3be097fea0f324227c890b58c50148316c8eae9d)
Change-Id: I85613c9929c2aabb02cf0f474d57fd8eb8d8c2f6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 5.4.5, 5.4.6 and 5.4.7
stable releases.
(From meta-aspeed rev: 97f7573559d0616aad7ca22c4355cbe08156311d)
Change-Id: I4bd32bea1378408234806129171a18cddc333ed7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (1):
peci: Fix function declaration
Jim Wright (3):
dt-bindings: hwmon/pmbus: Add ti, ucd90320 power sequencer
hwmon: Add support for UCD90320 Power Sequencer
ARM: dts: aspeed: rainier: Add UCD90320 power sequencer
(From meta-aspeed rev: 744ebe8b97e094432fcc9e1c4db968e5dc1b6b0f)
Change-Id: I721c2d444ab746a927ea800686f63bfac9138aa4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|