Age | Commit message (Collapse) | Author | Files | Lines |
|
This includes security and bug fixes from the 5.10.31 through to
5.10.36 stable releases.
Change-Id: Ic1f4aa968c2980d27509d76f7129039dc7645fe5
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Arnd Bergmann (1):
security: commoncap: fix -Wstringop-overread warning
Joel Stanley (2):
drm/aspeed: Look up syscon by phandle
drm/aspeed: Use dt matching for default register values
Change-Id: I5e037831ea1cf47ad0eee63b07b9765dac16ee0a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The following changes were merged to mainline in v5.13 and have been
backported to the openbmc dev-5.10 tree.
Most are device tree changes, with one fix to the SPI layer and some
changes to the LPC devices to match the new device tree.
Alpana Kumari (2):
ARM: dts: aspeed: rainier: Add presence GPIOs
ARM: dts: aspeed: everest: GPIOs support
Brandon Wyman (1):
ARM: dts: aspeed: everest: Add power supply i2c devices
Chia-Wei, Wang (5):
dt-bindings: aspeed-lpc: Remove LPC partitioning
ARM: dts: Remove LPC BMC and Host partitions
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
soc: aspeed: Adapt to new LPC device tree layout
Eddie James (9):
ARM: dts: aspeed: rainier: Enable fan watchdog
ARM: dts: aspeed: rainier 4U: Fix fan configuration
ARM: dts: aspeed: everest: Add FSI CFAMs and re-number engines
ARM: dts: aspeed: everest: Add RTC
ARM: dts: aspeed: everest: Enable fan watchdog
ARM: dts: aspeed: Add Rainier 1S4U machine
ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
ARM: dts: aspeed: Rainier: Update to pass 2 hardware
Jim Wright (1):
ARM: dts: aspeed: everest: Add UCD90320 power sequencer
Joel Stanley (2):
ARM: dts: aspeed: rainier: Add missing fan nodes
ARM: dts: aspeed: everest: Add size/address cells
Konstantin Aladyshev (1):
ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
Matthew Barth (2):
ARM: dts: aspeed: everest: Add max31785 fan controller device
ARM: dts: aspeed: everest: Add pca9552 fan presence
Paul Fertser (1):
ARM: dts: aspeed: tiogapass: add hotplug controller
Priyanga Ramasamy (1):
ARM: dts: aspeed: everest: Add I2C components
William A. Kennington III (1):
spi: Fix use-after-free with devm_spi_alloc_*
Change-Id: Ia5425c9cea3fe025f84e93f688ecd8ffec75ad01
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.28 through to
5.10.30 stable releases.
Milton Miller (1):
net/ncsi: Avoid channel_monitor hrtimer deadlock
Change-Id: I072b81523e0d337988e8f62bbea3ba9e1ea3f066
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.10.24 through to
5.10.27 stable releases.
Change-Id: I6f20c70e5d9fd4a88d2b8991196cafd08308ef8d
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (4):
fsi: occ: Don't accept response from un-initialized OCC
fsi: occ: Log error for checksum failure
hwmon: (occ) Start sequence number at one
hwmon: (occ) Print response status in first poll error message
Joel Stanley (2):
ARM: dts: aspeed: Fixes for ASRock E3C246D4I
ARM: config: aspeed_g5: Add SBTSI sensor
Kun Yi (3):
hwmon: (sbtsi) Add basic support for SB-TSI sensors
hwmon: (sbtsi) Add documentation
dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings
Tao Ren (1):
usb: gadget: aspeed: fix dma map failure
Change-Id: Ie9a007649087620c3aee2ea039a1fbec995a159f
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Nichole Wang (1):
ARM: dts: aspeed: mihawk: Add GPIO line names
Zev Weiss (1):
ARM: dts: aspeed: add ASRock E3C246D4I BMC
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: I3761b9664572605b4bbba894dd4cf949f635ead8
|
|
This fixes a bug in jffs2 and overlayfs that was introduced in v5.9 and
is present in the dev-5.10 kernel.
Eddie James (1):
spi: fsi: Remove multiple sequenced ops for restricted chips
Joel Stanley (1):
jffs2: Hook up splice_write callback
Change-Id: Icc3f325c8e6a7bc31bb5c09bf8674bc9b590379a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.8.21, 5.8.22 and 5.10.23
stable releases.
Change-Id: I770c5e31a18c23406cd18fddcd0b3a2cad52d71a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Bartosz Golaszewski (1):
hwmon: (pmbus) shrink code and remove pmbus_do_remove()
Brandon Wyman (1):
ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
Eddie James (4):
hwmon: (pmbus) Add a PMBUS_NO_CAPABILITY platform data flag
hwmon: (pmbus/ibm-cffps) Set the PMBUS_NO_CAPABILITY flag
ARM: dts: aspeed: rainier: Add additional processor CFAMs
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
Joel Stanley (1):
ARM: dts: aspeed: rainier: Mark controllers as restricted
Vishwanatha Subbanna (1):
ARM: dts: aspeed: rainier: Add directly controlled LEDs
Change-Id: Ie6ef7f9e6b80c71b25cd1b977acea27a14cf2201
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Dan Carpenter (1):
soc: aspeed: Fix a reference leak in aspeed_socinfo_init()
Joel Stanley (1):
soc: aspeed: socinfo: Add new systems
Change-Id: I7262d5f2b61ad20814f5af511f0e4064adcb23d2
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This includes security and bug fixes from the 5.8.15 through to 5.10.20
stable releases.
Of note are the following fixes. In particular, thank you to John Wang
from Bytedance for identifying the LPC snoop clock fix that Intel had in
their fork of the kernel tree, submitting it to mainline, and now it
appears in the backport for everyone to benefit from.
Jae Hyun Yoo (1):
soc: aspeed: snoop: Add clock control logic
John Wang (1):
ARM: dts: aspeed: Add LCLK to lpc-snoop
Ryan Chen (1):
clk: aspeed: Fix APLL calculate formula from ast2600-A2
Zhang Changzhong (1):
media: aspeed: fix error return code in aspeed_video_setup_video()
kernel test robot (1):
usb: gadget: aspeed: add missing of_node_put
Change-Id: Ib2070b48d93847b4e007e66203393925bb05188a
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This moves the OpenBMC kernel to a v5.10 base for both Aspeed and
Nuvoton. There are 125 patches in the tree, with 80 of those patches not
yet queued for merging in v5.11.
Notably the PECI patchset has been dropped as the author, Intel, has
elected to develop it out of tree instead of submitting it for mainline
inclusion.
The remaining out of tree patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (9):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
ARM: dts: aspeed: rainier: Don't shout addresses
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Dan Carpenter (1):
soc: aspeed: xdma: Return -EFAULT if copy_from_user() fails
Eddie James (9):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
ARM: dts: aspeed: Add Everest BMC machine
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
George Liu (2):
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
ARM: dts: aspeed: ast2600evb: Add MAC0
drm/aspeed: Add sysfs for output settings
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: configs: aspeed: Update defconfigs
Quan Nguyen (1):
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Ryan Sie (1):
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
Troy Lee (3):
dt-bindings: edac: aspeed-sdram-edac: Add ast2400/ast2600 support
ARM: dts: aspeed: Add AST2600 edac into common devicetree
edac: Supporting AST2400 and AST2600 edac driver
Change-Id: I455ad0dfa67f7224f07b3999b7e3b50755490653
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Eddie James (1):
ARM: dts: aspeed: Add Everest BMC machine
Matthew Barth (1):
hwmon: (pmbus/max31785) Support revision "B"
Change-Id: Ib12ae5c49b5245ae7b1574f723b52e9181cb7437
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
George Liu (2):
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
mustafa (1):
hwmon: (pmbus) Add support for ADM1266
(From meta-aspeed rev: 53deac894a40ade7bf58fffac15f04f1b278c7f8)
Change-Id: I723f161a58f12a5a4ef64b575fa36fe58b38dd4c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Quan Nguyen (1):
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Ryan Sie (1):
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
(From meta-aspeed rev: b276b99c1a93e9353db49f67514e8294216b455a)
Change-Id: I77c674b155c0444ad6725914a72fe75883004575
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (6):
ARM: dts: tacoma: Fix node vs reg mismatch for flash memory
ARM: dts: tacoma: Zero-pad flash memory region length
ARM: dts: rainier,tacoma: Fix size comment whitespace
ARM: dts: rainier, tacoma: Comment reserved memory regions
ARM: dts: rainier: Add reserved memory for ramoops
ARM: dts: tacoma: Add reserved memory for ramoops
Konstantin Aladyshev (3):
ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3
ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality
ARM: dts: aspeed: amd-ethanolx: Add GPIO line names
(From meta-aspeed rev: 521b4bb4e011a86f27f1ef0f519cb3d161f8da35)
Change-Id: I89a98cd464b4e4ae57bdad64126112a13f95723a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
spi: fsi: Fix transfer returning without finalizing message
(From meta-aspeed rev: 10fcd21efd04d5e109ef4354fe397ddc3bb3c9ea)
Change-Id: I9685586b10029a6e7ae7d61b93170aeaa2aaa93b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (2):
ARM: dts: aspeed: rainier: Add 4U device-tree
ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
Joel Stanley (1):
net: ftgmac100: Ensure tx descriptor updates are visible
(From meta-aspeed rev: 1e79f32e8571974816a086a330f270889ebe4d39)
Change-Id: I1289cd2c5240a3cdb4eddb88b794a1efd886885b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.15, 5.8.16 and
5.8.17 stable releases.
(From meta-aspeed rev: 07d964972facc7d233f034f0bbdaea1c66e225b4)
Change-Id: Ib6b7a9828e596f4f51f614b0db746a080d6ff5d5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
George Liu (1):
ARM: dts: Fix label address for 64MiB OpenBMC flash layout
John Wang (1):
ARM: dts: aspeed: g220a: Add some gpios
(From meta-aspeed rev: 95ee7821d9291e3696297990c330cce9a0e26966)
Change-Id: Ice312e449e774c000e4bf572b0e99bfe77c14b92
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: kprobes: Avoid fortify_panic() when copying optprobe template
Dylan Hung (1):
net: ftgmac100: Fix Aspeed ast2600 TX hang issue
(From meta-aspeed rev: 5d598c61c64dd7b70f50c87e53e274445f57481a)
Change-Id: I3ca12a28d8b5178f64f7d5cc37e5c515d75921c1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dan Carpenter (1):
soc: aspeed: xdma: Return -EFAULT if copy_from_user() fails
Joel Stanley (1):
drm/aspeed: Add sysfs for output settings
(From meta-aspeed rev: 772d6152ba68fecbe60f29d0555adc5f9e46d7cf)
Change-Id: Ib38acc30a4d1dd6d98d1f1ae566d537c59d06c0b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.13 and
5.8.14 stable releases.
(From meta-aspeed rev: 9793d740db96120560c79d53907ff43afecca503)
Change-Id: I8d3c6ca3084ae393ff775766b8be84c8ed722b2b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (2):
ARM: config: Enable PSTORE in aspeed_g5_defconfig
ARM: dts: aspeed: rainier: Don't shout addresses
Eddie James (1):
fsi: Aspeed: Add mutex to protect HW access
John Wang (1):
ARM: dts: Add 64MiB OpenBMC flash layout
Konstantin Aladyshev (1):
ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 binding
Lotus Xu (1):
ARM: dts: aspeed: Add Bytedance g220a BMC machine
Zev Weiss (2):
peci: fix error-handling in peci_dev_ioctl()
peci-cputemp: label CPU cores from zero instead of one
(From meta-aspeed rev: 282f8ce537d65b0e2fd00eca91e637518e97a64e)
Change-Id: Ie63530abe3e2c26e58597e8c9e78fd01a3e8dd4f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and
5.8.12 stable releases.
The previous commit did not bump to a version containing these fixes.
(From meta-aspeed rev: 8d37078a9d3cfb22ada2ad4d052449fc8a2e4f0b)
Change-Id: I3a210e76e52d350d3e45345ad0c3c383990961da
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and
5.8.12 stable releases.
(From meta-aspeed rev: 20431851af835631f4cbe479d958f565ebef781b)
Change-Id: Ib6965a9176d578cbc5eda2384928f17584c6cddc
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (5):
hwmon: (pmbus) Expose PEC debugfs attribute
pinctrl: aspeed: Format pinconf debug consistent with pinmux
pinctrl: aspeed: Use the right pinconf mask
pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks
ARM: dts: rainier: Disable internal pull-downs on eMMC pins
(From meta-aspeed rev: c6a057b489fc7087f00abdbda682489e7a2e3318)
Change-Id: Ie4d9c5d6519e340fcd7cbca9a32d733f934a271f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.6, 5.8.7 and 5.8.8
stable releases.
(From meta-aspeed rev: 3bad2091835b6054b7ba1a2f016b9c125a1ce440)
Change-Id: I4a1c370c1760ab0a273a88c836289b83e5ee44ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Enable I2C slave mode in ast2500 and ast2600 kernel config.
Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device
ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device
(From meta-aspeed rev: 6204d930bc5b9df98192843227abac29946f75df)
Change-Id: I2b66eb5192fabb8562af2327ef5afe3ef3fc33d9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.1, 5.8.2, 5.8.3,
5.8.4 and 5.8.5 stable releases.
(From meta-aspeed rev: d70b397ee265c7cd3d6e4678b86009e9d7127446)
Change-Id: Ieb305bf268a1044f1682992c3e1e0153aac08747
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: Aspeed: Rainier: Enable XDMA engine
Vishwanatha Subbanna (2):
ARM: dts: aspeed: rainier: Add Operator Panel LEDs
ARM: dts: aspeed: rainier: Add directly controlled LEDs
(From meta-aspeed rev: f4c4262172c24e2727f51e6bc0518173fd45c0e4)
Change-Id: Iacca07cde2dceff014997ebcab980b7e65bce60a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Brad Bishop (4):
spi: fsi: Handle 9 to 15 byte transfers lengths
spi: fsi: Fix clock running too fast
spi: fsi: Fix use of the bneq+ sequencer instruction
eeprom: at25: Split reads into chunks and cap write size
Eddie James (3):
dt-bindings: fsi: fsi2spi: Document new restricted property
spi: fsi: Implement restricted size for certain controllers
spi: fsi: Check mux status before transfers
(From meta-aspeed rev: f4b7c1c8227d54a4b805479132b32227113c77d7)
Change-Id: I501829de26fba8d2bfd7440483015380192d2c50
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the OpenBMC kernel tree to a 5.8 base. It has beent two
weeks since the kernel was last updated, making it the quickest bump in
OpenBMC history.
There are 93 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs were updated to fix selection of video device. An
upstream reorganisation of the V4L kconfig resulted in a large number of
extra drivers enabled when all we required was VIDEO_ASPEED.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (13):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
Ben Tyner (1):
ARM: dts: aspeed: witherspoon-128: Remove checkstop GPIO from gpio-keys definitions
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (10):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
ARM: dts: aspeed: ast2600evb: Add MAC0
soc: aspeed-lpc-ctrl: Fix printf warning
ARM: configs: aspeed: Update defconfigs
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of video device
mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths"
ARM: aspeed: g5: Do not set sirq polarity
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 3c9616235643263beea47ef5db5cecafa3349c2e)
Change-Id: I4616f47026e00e49bda0abb1fc586dd2faabee30
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Somehow this was not enabled. It is required for Witherspoon 128, Tacoma
and Rainier.
(From meta-aspeed rev: a7bbd475453768037877c820caed02f39055eb6e)
Change-Id: Ie80479aa455c18c921387b23586cff3e7bc79204
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.11 and
5.7.12 stable releases.
(From meta-aspeed rev: ea33f9ced2354a75d8918a3c7e61ca56f67e21df)
Change-Id: Iaa9bd005a8897ab5e9a1148145c02d6fbb8603fa
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Tyner (1):
Remove checkstop GPIO from gpio-keys definitions
Eddie James (9):
mmc: sdhci-of-aspeed: Fix clock divider calculation
fsi: master: Add boolean parameter to link_enable function
fsi: core: Disable link when slave init fails
fsi: core: Set slave local bus ownership during init
ARM: dts: aspeed: rainier: Switch OCCs to P10
ARM: dts: aspeed: rainier: Enable EHCI controller
ARM: dts: Aspeed: tacoma: Enable EHCI controller
fsi: master: Remove link enable read-back
ARM: dts: aspeed: rainier: Add CFAM SPI controllers
Joel Stanley (2):
mmc: sdhci-of-aspeed: Revert "Prevent clock divider of zero"
ARM: dts: aspeed: rainier: Add FSI I2C masters
(From meta-aspeed rev: 4171a5eaa18f59cd4eef7d5dd1e7c8e548e2f78e)
Change-Id: I9aaf5fd3cbf6ba1ab7acf6dbc66588b6367f1049
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Some platforms make use of it.
(From meta-aspeed rev: 132487e2ee60e4b167c07fb63093e0ac493a3fbb)
Change-Id: I8752df5f9b4b195e605676a398cfdf1510b11008
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: dts: rainier: Describe GPIO mux on I2C3
Joachim Fenkes (2):
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
Joel Stanley (4):
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
fsi: aspeed: Support CFAM reset GPIO
ARM: dts: aspeed: rainier: Add CFAM reset GPIO
ARM: dts: aspeed: tacoma: Add CFAM reset GPIO
(From meta-aspeed rev: ee96b77b00dbbc7cbf598dde0008c2ba96eb8d28)
Change-Id: Ie73ef89d795e49a8f9bbef11261ae78d2b986e4a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.10 stable release.
(From meta-aspeed rev: 69ec802b7b04b61203c81778f695a9dad7a2d0d4)
Change-Id: I63b8b9773b0d49114e892bd0d57b95e6ad8cc516
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Joel Stanley (1):
spi-nor: Remove unused file
(From meta-aspeed rev: 7e2a5cd6ae49c669168c18e897d87e29a9b9244b)
Change-Id: I7489f4a9bc3e8018830956a019b0ad24c1cc2a7f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This updates the OpenBMC kernel tree to a 5.7 base. It has been three
releases since the kernel was updated, making it over 9 months of
development time. The stable releses up to v5.7.9 are integrated in this
bump.
There are 106 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs are regenerated with one change made to enable debugfs,
as it will default to off with the new kernel without explicitly
enabling it, and some platforms (eg Witherspoon) reply on it being
enabled.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (14):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (21):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
fsi: aspeed: Enable 23-bit addressing
clk: ast2600: Fix AHB clock divider for A1
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
ARM: dts: aspeed: rainier: Add second cfam on the hub
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
ARM: dts: aspeed: ast2600: Update XDMA engine node
ARM: dts: aspeed: ast2500: Update XDMA engine node
ARM: dts: aspeed: witherspoon: Enable XDMA engine
ARM: dts: aspeed: tacoma: Enable XDMA engine
clk: AST2600: Add mux for EMMC clock
mmc: sdhci-of-aspeed: Prevent clock divider of zero
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (13):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
fsi: aspeed: Support cabled FSI
fsi: aspeed: Run the bus at maximum speed
fsi: aspeed: Add module param for bus divisor
ARM: dts: aspeed: ast2600evb: Add MAC0
ARM: configs: aspeed: Update defconfigs
hwmon (peci-dmmtemp): Fix 'sizeof' warning
soc: aspeed-lpc-ctrl: Fix printf warning
Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions"
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: a1d8d7791b8257b85eb85d73f08c2961c8c94f16)
Change-Id: I84ae1a28349144db398b7a43e0a2951c1eee434d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Needed for SPI-attached eeproms.
(From meta-aspeed rev: b64781c123543c5cbfecb81d974e82716545b099)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: I5a931b742661d62790199afdd20dac5ef5935ad3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.45, 5.4.46, 5.4.47 and
5.4.48 stable releases.
(From meta-aspeed rev: c3bc610a79d6b35f6b3c1707c86ca89922a4fad5)
Change-Id: I2839dcb68dbb1ed011adf236352add86e7e50d09
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: aspeed: rainier: Add second cfam on the hub
Joel Stanley (1):
ARM: dts: aspeed: ast2600evb: Add MAC0
(From meta-aspeed rev: d13ebb3c7ca5dabd083bfa4d7dfa1897e9b77048)
Change-Id: I9b4b1e70b67f6017f736cac85f010c8f3a4ba69e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.44 stable release.
(From meta-aspeed rev: ec813222ab8916603ce96d76f99c967d6d67110b)
Change-Id: I911e44daeee1c8c507b744a002979cd82c5a114b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Pai (1):
ARM: dts: aspeed: mihawk: Add aliases for i2c and add thermal sensor
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Eddie James (5):
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: aspeed: xdma: Update to v11 upstream
soc: aspeed: xdma: Update to v11 upstream
ARM: dts: aspeed: Update XDMA to v11 upstream properties
(From meta-aspeed rev: 6b226ab7f77c76db68e3d9e70b0f1a5c1dde514d)
Change-Id: I272058c5e0dd5ca12b17379d1bf4f94f5a7ba290
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.40, 5.4.41, 5.4.42,
and 5.4.43 stable releases.
(From meta-aspeed rev: e491b87b48ae956b3b40cc93a1a4102a0841f8b1)
Change-Id: I23cc7318d2d28e6dff73ebf2fd4707702fe3c382
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.39 stable release.
It also includes a revert of the inital workaround for interrupt
behaviour on AST2600's I2C master as 5.4.39 contains an upstream fix.
Joel Stanley (1):
i2c: aspeed: Revert initial IRQ workaround
(From meta-aspeed rev: ac403399d5fbed4eba4a1587c9cfc2bb30cfd07a)
Change-Id: I84376e84e55ce22498442f3d24877805ec22c8d6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
ARM: dts: aspeed: rainier: System has one SPI NOR
(From meta-aspeed rev: 963da65de5c17145cf34c5bc82376cf3a67f4ae0)
Change-Id: I5e465b08a33cdecaf40cde0f024e88a7856b9728
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|