summaryrefslogtreecommitdiff
path: root/meta-aspeed/recipes-kernel
AgeCommit message (Collapse)AuthorFilesLines
2020-08-07linux-aspeed: Move to 5.7.12Joel Stanley1-2/+2
This includes security and bug fixes from the 5.7.11 and 5.7.12 stable releases. (From meta-aspeed rev: ea33f9ced2354a75d8918a3c7e61ca56f67e21df) Change-Id: Iaa9bd005a8897ab5e9a1148145c02d6fbb8603fa Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28linux-aspeed: eMMC, FSI, Rainier and Tacoma device treeeJoel Stanley1-1/+1
Ben Tyner (1): Remove checkstop GPIO from gpio-keys definitions Eddie James (9): mmc: sdhci-of-aspeed: Fix clock divider calculation fsi: master: Add boolean parameter to link_enable function fsi: core: Disable link when slave init fails fsi: core: Set slave local bus ownership during init ARM: dts: aspeed: rainier: Switch OCCs to P10 ARM: dts: aspeed: rainier: Enable EHCI controller ARM: dts: Aspeed: tacoma: Enable EHCI controller fsi: master: Remove link enable read-back ARM: dts: aspeed: rainier: Add CFAM SPI controllers Joel Stanley (2): mmc: sdhci-of-aspeed: Revert "Prevent clock divider of zero" ARM: dts: aspeed: rainier: Add FSI I2C masters (From meta-aspeed rev: 4171a5eaa18f59cd4eef7d5dd1e7c8e548e2f78e) Change-Id: I9aaf5fd3cbf6ba1ab7acf6dbc66588b6367f1049 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28meta-aspeed: g6: defconfig: Enable I2C GPIO muxAndrew Jeffery1-0/+1
Some platforms make use of it. (From meta-aspeed rev: 132487e2ee60e4b167c07fb63093e0ac493a3fbb) Change-Id: I8752df5f9b4b195e605676a398cfdf1510b11008 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28linux-aspeed: CFAM reset, I2C mux, SBE FIFOJoel Stanley1-1/+1
Andrew Jeffery (1): ARM: dts: rainier: Describe GPIO mux on I2C3 Joachim Fenkes (2): fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE fsi/sbefifo: Fix reset timeout Joel Stanley (4): ARM: config: aspeed-g5: Enable I2C GPIO mux driver fsi: aspeed: Support CFAM reset GPIO ARM: dts: aspeed: rainier: Add CFAM reset GPIO ARM: dts: aspeed: tacoma: Add CFAM reset GPIO (From meta-aspeed rev: ee96b77b00dbbc7cbf598dde0008c2ba96eb8d28) Change-Id: Ie73ef89d795e49a8f9bbef11261ae78d2b986e4a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-24linux-aspeed: Move to 5.7.10Joel Stanley1-2/+2
This includes security and bug fixes from the 5.7.10 stable release. (From meta-aspeed rev: 69ec802b7b04b61203c81778f695a9dad7a2d0d4) Change-Id: I63b8b9773b0d49114e892bd0d57b95e6ad8cc516 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-23linux-aspeed: spi-nor fixesJoel Stanley1-1/+1
Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Joel Stanley (1): spi-nor: Remove unused file (From meta-aspeed rev: 7e2a5cd6ae49c669168c18e897d87e29a9b9244b) Change-Id: I7489f4a9bc3e8018830956a019b0ad24c1cc2a7f Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-22linux-aspeed: Move to Linux 5.7Joel Stanley5-22/+24
This updates the OpenBMC kernel tree to a 5.7 base. It has been three releases since the kernel was updated, making it over 9 months of development time. The stable releses up to v5.7.9 are integrated in this bump. There are 106 out of tree kernel patches carried in the OpenBMC tree. The defconfigs are regenerated with one change made to enable debugfs, as it will default to off with the new kernel without explicitly enabling it, and some platforms (eg Witherspoon) reply on it being enabled. Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Geissler (1): ARM: dts: tacoma: Add KCS node for LPC MCTP Andrew Jeffery (14): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers pinctrl: aspeed: Improve debug output soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned misc: Add ASPEED KCS driver for MCTP purposes ARM: dts: witherspoon: Add KCS node for LPC MCTP pinctrl: aspeed: Describe the heartbeat function on ball Y23 ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP Ben Tyner (2): ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key Brad Bishop (4): ARM: dts: aspeed-g6: Expose SuperIO scratch registers soc: aspeed: lpc: Add G6 compatible strings ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string Cédric Le Goater (22): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600 mtd: spi-nor: aspeed: Disable zero size segments on the AST2600 spi-nor: aspeed-smc: Detect 4b opcodes differently /dev/mem: add a devmem kernel parameter to activate the device Eddie James (21): ARM: dts: rainier: Add KCS node for LPC MCTP ARM: dts: aspeed: Add witherspoon-128 machine fsi: aspeed: Enable 23-bit addressing clk: ast2600: Fix AHB clock divider for A1 dt-bindings: fsi: Add P10 OCC device documentation fsi: occ: Add support for P10 hwmon: (occ) Add new temperature sensor type i2c: fsi: Fix the port number field in status register i2c: fsi: Prevent adding adapters for ports without dts nodes ARM: dts: aspeed: rainier: Add second cfam on the hub dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl ARM: dts: aspeed: ast2600: Update XDMA engine node ARM: dts: aspeed: ast2500: Update XDMA engine node ARM: dts: aspeed: witherspoon: Enable XDMA engine ARM: dts: aspeed: tacoma: Enable XDMA engine clk: AST2600: Add mux for EMMC clock mmc: sdhci-of-aspeed: Prevent clock divider of zero leds: pca955x: Add an IBM software implementation of the PCA9552 chip Fran Hsu (3): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Jae Hyun Yoo (12): clk: ast2600: enable BCLK for PCI/PCIe bus always dt-bindings: Add PECI subsystem document Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add bindings document of Aspeed PECI adapter ARM: dts: aspeed: Add PECI node peci: Add Aspeed PECI adapter driver dt-bindings: mfd: Add Intel PECI client bindings document mfd: intel-peci-client: Add Intel PECI client driver Documentation: hwmon: Add documents for PECI hwmon drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Joel Stanley (13): ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree ARM: dts: nuvoton: Update EVB for new PECI layout ARM: dts: nuvoton: evb: Rework enabling of nodes soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600 fsi: aspeed: Support cabled FSI fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Add module param for bus divisor ARM: dts: aspeed: ast2600evb: Add MAC0 ARM: configs: aspeed: Update defconfigs hwmon (peci-dmmtemp): Fix 'sizeof' warning soc: aspeed-lpc-ctrl: Fix printf warning Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions" Tomer Maimon (11): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: configs: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine. dt-bindings: peci: add NPCM PECI documentation peci: npcm: add NPCM PECI driver (From meta-aspeed rev: a1d8d7791b8257b85eb85d73f08c2961c8c94f16) Change-Id: I84ae1a28349144db398b7a43e0a2951c1eee434d Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: g6: Enable AT25 EEPROM driver configEddie James1-0/+1
Needed for SPI-attached eeproms. (From meta-aspeed rev: b64781c123543c5cbfecb81d974e82716545b099) Signed-off-by: Eddie James <eajames@linux.ibm.com> Change-Id: I5a931b742661d62790199afdd20dac5ef5935ad3 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: Move to 5.4.48Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.45, 5.4.46, 5.4.47 and 5.4.48 stable releases. (From meta-aspeed rev: c3bc610a79d6b35f6b3c1707c86ca89922a4fad5) Change-Id: I2839dcb68dbb1ed011adf236352add86e7e50d09 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: Rainier and EVB device treesJoel Stanley1-1/+1
Eddie James (1): ARM: dts: aspeed: rainier: Add second cfam on the hub Joel Stanley (1): ARM: dts: aspeed: ast2600evb: Add MAC0 (From meta-aspeed rev: d13ebb3c7ca5dabd083bfa4d7dfa1897e9b77048) Change-Id: I9b4b1e70b67f6017f736cac85f010c8f3a4ba69e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-05linux-aspeed: Move to 5.4.44Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.44 stable release. (From meta-aspeed rev: ec813222ab8916603ce96d76f99c967d6d67110b) Change-Id: I911e44daeee1c8c507b744a002979cd82c5a114b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-05linux-aspeed: DTS updates, XDMA, FSI I2CJoel Stanley1-1/+1
Ben Pai (1): ARM: dts: aspeed: mihawk: Add aliases for i2c and add thermal sensor Ben Tyner (2): ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key Eddie James (5): i2c: fsi: Fix the port number field in status register i2c: fsi: Prevent adding adapters for ports without dts nodes dt-bindings: soc: aspeed: xdma: Update to v11 upstream soc: aspeed: xdma: Update to v11 upstream ARM: dts: aspeed: Update XDMA to v11 upstream properties (From meta-aspeed rev: 6b226ab7f77c76db68e3d9e70b0f1a5c1dde514d) Change-Id: I272058c5e0dd5ca12b17379d1bf4f94f5a7ba290 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-02linux-aspeed: Move to 5.4.43Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.40, 5.4.41, 5.4.42, and 5.4.43 stable releases. (From meta-aspeed rev: e491b87b48ae956b3b40cc93a1a4102a0841f8b1) Change-Id: I23cc7318d2d28e6dff73ebf2fd4707702fe3c382 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-08linux-aspeed: Move to 5.4.39Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.39 stable release. It also includes a revert of the inital workaround for interrupt behaviour on AST2600's I2C master as 5.4.39 contains an upstream fix. Joel Stanley (1): i2c: aspeed: Revert initial IRQ workaround (From meta-aspeed rev: ac403399d5fbed4eba4a1587c9cfc2bb30cfd07a) Change-Id: I84376e84e55ce22498442f3d24877805ec22c8d6 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-08linux-aspeed: Rainier DTSJoel Stanley1-1/+1
Joel Stanley (1): ARM: dts: aspeed: rainier: System has one SPI NOR (From meta-aspeed rev: 963da65de5c17145cf34c5bc82376cf3a67f4ae0) Change-Id: I5e465b08a33cdecaf40cde0f024e88a7856b9728 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-06linux-aspeed: Move to 5.4.38Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.33, 5.4.34, 5.4.35, 5.4.36, 5.4.37 and 5.4.38 stable releases. (From meta-aspeed rev: 60604033e4584eee4958a8b025a4b51e13a99638) Change-Id: I64558ff2aca67b1b9c75df026a496fb5a7308d67 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-06linux-aspeed: Rainier DTS, 2600 Pinctrl, OCCJoel Stanley1-1/+1
Andrew Jeffery (2): pinctrl: aspeed: Describe the heartbeat function on ball Y23 ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP Eddie James (3): dt-bindings: fsi: Add P10 OCC device documentation fsi: occ: Add support for P10 hwmon: (occ) Add new temperature sensor type (From meta-aspeed rev: 8b46bfecbdc8b22b1cb4b9441666b1345fc8dadf) Change-Id: I86124c57eb821cc2bf268c110802946bac5d043e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-01linux-aspeed: perf build fix, FSI attached SPIJoel Stanley2-1/+3
Changbin Du (1): perf: Make perf able to build with latest libbfd Eddie James (2): dt-bindings: fsi: Add FSI2SPI bindings spi: Add FSI-attached SPI controller driver Joel Stanley (1): ARM: confisgs: aspeed_g5: Sync with OpenBMC (From meta-aspeed rev: 29b354d091e668d00598d0ef05f070f73c91c0df) Change-Id: I6fe69e32f460d0aeb41fe14b4e87ef95f6cb436e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-16linux-aspeed: Rainier DTS, AST2600 A1 clock, FSIJoel Stanley1-1/+1
Andrew Geissler (1): ARM: dts: aspeed: rainier: Add gpio line names Eddie James (1): clk: ast2600: Fix AHB clock divider for A1 Joel Stanley (2): fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Add module param for bus divisor (From meta-aspeed rev: ae8c8b5c2c8db832831ad9291faf0b6ed8224379) Change-Id: I5dd7d6a233969cb4bcb69ba65ce2ca7b334f8f5b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-15linux-aspeed: Move to 5.4.32Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.28, 5.4.29, 5.4.30, 5.4.31 and 5.4.32 stable releases. (From meta-aspeed rev: 03423fdeee77ec940bbafd7b049d4067e6fea80c) Change-Id: I095a9fab81a0cad09f20324e27db12a690ca9b1a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-15linux-aspeed: I2C TPM driver, Tacoma TPM and second VUARTJoel Stanley1-1/+1
The TPM TIS driver for I2C comes from v6 of the patchset on the linux-integrity list[1], plus additional backports to support it on 5.4. https://lore.kernel.org/linux-integrity/20200407162044.168890-1-amirmizi6@gmail.com/T/ Amir Mizinski (7): tpm: tpm_tis: Make implementation of read16 read32 write32 optional tpm: tpm_tis: Add check_data handle to tpm_tis_phy_ops tpm: tpm_tis: rewrite "tpm_tis_req_canceled()" tpm: tpm_tis: Fix expected bit handling and send all bytes in one shot without last byte in exception tpm: Handle an exception for TPM Firmware Update mode. dt-bindings: tpm: Add YAML schema for TPM TIS I2C options tpm: tpm_tis: add tpm_tis_i2c driver Andrew Jeffery (1): ARM: dts: tacoma: Enable the second VUART Eddie James (1): ARM: dts: aspeed: tacoma: Add tpm Sumit Garg (1): tpm: Move tpm_buf code to include/linux/ (From meta-aspeed rev: 1aaea9d85026a6eda21dc9f817d4d0afa703d39e) Change-Id: I294e61124bccd0a62a5f61d7d8624044fbf74b75 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-14linux-aspeed: Enable DEBUG_LISTJoel Stanley3-0/+3
This option is considered a security enhancement[1]. [1] https://lore.kernel.org/lkml/20200324153643.15527-11-will@kernel.org/ (From meta-aspeed rev: bc75bf104e650e38907265cb7d9396dfe3f599c0) Change-Id: I35a4f9b63ac053dcfc3d22eb1b12b11019196f00 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-03linux-aspeed: KCS MCTP, XDMA, FSI, GPIO namesJoel Stanley1-1/+1
Eddie James (5): fsi: aspeed: Enable 23-bit addressing ARM: dts: aspeed: tacoma: Add iio-hwmon nodes for IIO devices hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection hwmon: (pmbus/ibm-cffps) Fix LED behavior again soc: aspeed: xdma: Fix command buffer overrun Joel Stanley (2): ARM: dts: aspeed: rainier: Add VGA reserved memory region ARM: dts: aspeed: raininer: Enable XDMA (From meta-aspeed rev: 6e60548f439e07806f3089a611f801ac85238f0b) Change-Id: I848095fb60f8a2e364e6ba939466cf834d3a31e3 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-31linux-aspeed: Move to 5.4.28Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.27 and 5.4.28 stable releases. (From meta-aspeed rev: 048aaa997f7ade428154f4457cdf5b25e16f5f65) Change-Id: I5abb494b6ab7acb5edf2060e568c7c580bf3ca24 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-31linux-aspeed: KCS MCTP, XDMA, FSI, GPIO namesJoel Stanley1-1/+1
Andrew Geissler (3): ARM: dts: tacoma: Add KCS node for LPC MCTP ARM: dts: aspeed: romulus: Add gpio line names ARM: dts: aspeed: zaius: Add gpio line names Andrew Jeffery (2): misc: Add ASPEED KCS driver for MCTP purposes ARM: dts: witherspoon: Add KCS node for LPC MCTP Eddie James (7): ARM: dts: rainier: Add KCS node for LPC MCTP soc: aspeed: xdma: Switch to reserved memory dt-bindings: soc: xdma: Switch to reserved memory node ARM: dts: aspeed: tacoma: Add reserved memory for XDMA ARM: dts: aspeed: witherspoon: Add reserved memory for XDMA ARM: dts: aspeed: ast2600: Set arch timer always-on ARM: dts: Aspeed: Add witherspoon-128 machine Joel Stanley (3): ARM: dts: aspeed: tacoma: Add GPIOs for FSI fsi: aspeed: Support cabled FSI ARM: dts: aspeed: tacoma: Add line names (From meta-aspeed rev: 22600b6fc6d6bdcf33407b7cf8d32b8c09a713e7) Change-Id: I9251473c0a5b4601845d3c0d588b5a3bdb1d4f40 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-25linux-aspeed: Remove old config optionsJoel Stanley3-3/+0
CONFIG_CRYPTO_ECHAINIV is default n so we don't need it in our config. CONFIG_EDAC_ASPEED is not supported on AST2600. (From meta-aspeed rev: 337c8064630d95aa7d7cc5d948bd99e72cfa3af8) Change-Id: Ief0ebacbd2b9ed2d8f8dce7eb4c4828da0ae58d3 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-25linux-aspeed: Enable CGROUP_BPF and NAMESPACESJoel Stanley3-0/+9
These are used by systemd to provide isolation features: Required for IPAddressDeny= and IPAddressAllow= in resource control unit settings CONFIG_CGROUP_BPF Required for PrivateNetwork= in service units: CONFIG_NET_NS Note that systemd-localed.service and other systemd units use PrivateNetwork so this is effectively required. Required for PrivateUsers= in service units: CONFIG_USER_NS (NET_NS is default y so we get it by enabling namespace support). (From meta-aspeed rev: 5ad76c27abbb7d7e65c97bce6be63d7aa542a531) Change-Id: I8e6311526393c663c62e310a465df9306251c021 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-24linux-aspeed: Move to 5.4.26Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.24, 5.4.25 and 5.4.26 stable releases. (From meta-aspeed rev: e9a99472750d69a0efdfe0277de48dd19dafb839) Change-Id: I7d2721fde89ac7ad201b6418d9956d29adaea178 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-24linux-aspeed: XDMA, tacoma, FWH2AHB on AST2600Joel Stanley1-1/+1
Eddie James (16): dt-bindings: interrupt-controller: Add Aspeed SCU interrupt controller irqchip: Add Aspeed SCU interrupt controller ARM: dts: aspeed: ast2500: Add SCU interrupt controller ARM: dts: aspeed: ast2600: Add SCU interrupt controllers dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl ARM: dts: aspeed: ast2500: Add XDMA Engine ARM: dts: aspeed: ast2600: Add XDMA Engine ARM: dts: aspeed: witherspoon: Enable XDMA Engine ARM: dts: aspeed: tacoma: Enable XDMA engine soc: aspeed: xdma: Add memory controller configuration soc: aspeed: xdma: Add root complex reset soc: aspeed: xdma: Disable PCI AHB bridge during probe soc: aspeed: xdma: Fix BMC PCI device class and revision for AST2600 Guenter Roeck (1): ARM: dts: aspeed: tacoma: Enable eMMC controller Joel Stanley (1): soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600 (From meta-aspeed rev: de4339cc7a300c65f129cc71ed5f8da367a504a1) Change-Id: I233aa1eb763bb445b5a46c6762ea6b377bb378dd Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-03-05linux-aspeed: Move to 5.4.23Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.22 and 5.4.23 stable releases. (From meta-aspeed rev: c6e6f90361325121bd39400513c4b2b83ac4124a) Change-Id: Id94badca45a5c0e83f082068b4c171cdde060eaf Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-02-28linux-aspeed: Small fixes to PECI, Rainier, Wspoon, MihawkJoel Stanley1-1/+1
Andrew Geissler (1): ARM: dts: aspeed: witherspoon: Add gpio line names Andrew Jeffery (1): ARM: dts: rainier: Enable VUART2 Ben Pai (1): ARM: dts: mihawk: Change the name of leds Jae Hyun Yoo (2): peci: fix license identifier hwmon: peci: change label strings to reflect natural numbers Matthew Barth (1): ARM: dts: rainier: Set PCA9552 pin types (From meta-aspeed rev: 213765a9564783b0c5800a58865fea5525373e33) Change-Id: I71bbef501e1e9c327cdc6c2647218d7ad686f399 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-02-28linux-aspeed: Move to 5.4.21Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.17, 5.4.18, 5.4.19, 5.4.20 and 5.4.21 stable releases. (From meta-aspeed rev: 99343a58cbdf1db7e28763be3111e1185d39fe2b) Change-Id: I14386b65a7bc1b618cef17284f02b8a06c82831f Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-31linux-aspeed: Move to 5.4.16Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.12, 5.4.13, 5.4.14, 5.4.15 and 5.4.16 stable releases. (From meta-aspeed rev: 55b7be3b1aaa0afe3282e17146f191a44e51b530) Change-Id: I0ad7d464893f4e148993e234dfbfeba5e44ab380 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-31linux-aspeed: i2c, rainier, ast2600 vhubJoel Stanley1-1/+1
Eddie James (1): i2c: aspeed: Prevent state corruption for IRQ with no status Matthew Barth (1): ARM: dts: rainier: Remove regulators Tao Ren (3): usb: gadget: aspeed: read vhub config from of_device_id usb: gadget: aspeed: add ast2600 vhub support ARM: dts: aspeed-g6: add usb functions (From meta-aspeed rev: 3275d96ddf674290e50332632a129dc743f9a89f) Change-Id: I4cc6223f6167b2db830d77122bc142d2f9a074b6 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-14linux-aspeed: Move to 5.4.11Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.9, 5.4.10 and 5.4.11 stable releases. (From meta-aspeed rev: 8333ab8d48605e261f671c6d0c8281c49846c489) Change-Id: I83d06ebae33df4eb6ebe13b6f09bbc0e849c5cbb Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-14linux-aspeed: CFF PS and media fixiesJoel Stanley1-1/+1
Eddie James (3): hwmon: (pmbus/ibm-cffps) Add new manufacturer debugfs entries hwmon: (pmbus/ibm-cffps) Add the VMON property for version 2 hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off Jae Hyun Yoo (1): media: aspeed: refine hsync/vsync polarity setting logic (From meta-aspeed rev: 28a36e4550477bf0b4e42b5f4e9b6a2a7b7efed8) Change-Id: I6e86781330c0cf83631e496337c4b5f29a012b65 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-08linux-aspeed: IPMB and rainier fsi dtsJoel Stanley1-1/+1
Joel Stanley (1): ARM: dts: aspeed: rainier: Add host FSI description Vijay Khemka (3): drivers: ipmi: Support for both IPMB Req and Resp drivers: ipmi: Support raw i2c packet in IPMB drivers: ipmi: Modify max length of IPMB packet (From meta-aspeed rev: 50412aa4f96d20200140451aa0357f2d4017f40a) Change-Id: Id976f0c9c3c0a488d4e756ebf4d93e678dad7fec Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-06linux-aspeed: Move to 5.4.8Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.8 stable release. (From meta-aspeed rev: c04542140556963e58b0dab3dace24d429f622dc) Change-Id: I400e60f6cbc12a79e8621e874db41fdc3d816e31 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-06linux-aspeed: Device tree fixes for AST2600 machinesJoel Stanley1-1/+1
Brandon Wyman (1): ARM: dts: aspeed: rainier: Fix fan fault and presence Joel Stanley (5): ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: aspeed: rainier: Remove duplicate i2c busses (From meta-aspeed rev: 3be097fea0f324227c890b58c50148316c8eae9d) Change-Id: I85613c9929c2aabb02cf0f474d57fd8eb8d8c2f6 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-06linux-aspeed: Move to 5.4.7Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.5, 5.4.6 and 5.4.7 stable releases. (From meta-aspeed rev: 97f7573559d0616aad7ca22c4355cbe08156311d) Change-Id: I4bd32bea1378408234806129171a18cddc333ed7 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-01-06linux-aspeed: UCD90320 for Rainier, PECI fixesJoel Stanley1-1/+1
Jae Hyun Yoo (1): peci: Fix function declaration Jim Wright (3): dt-bindings: hwmon/pmbus: Add ti, ucd90320 power sequencer hwmon: Add support for UCD90320 Power Sequencer ARM: dts: aspeed: rainier: Add UCD90320 power sequencer (From meta-aspeed rev: 744ebe8b97e094432fcc9e1c4db968e5dc1b6b0f) Change-Id: I721c2d444ab746a927ea800686f63bfac9138aa4 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-12-20linux-aspeed: Move to v5.4Joel Stanley4-3/+9
This moves the OpenBMC kernel to a Linux v5.4 base. There are 161 patches in dev-5.4. Of these 69 are backported from upstream, leaving 92 out of tree patches. Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Jeffery (12): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): One-shot retries for failure to set page pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers net: ftgmac100: Ungate RCLK for RMII on ASPEED MACs pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration pinctrl: aspeed: Improve debug output soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned Arnd Bergmann (1): ARM: aspeed: ast2500 is ARMv6K Brad Bishop (4): ARM: dts: aspeed-g6: Expose SuperIO scratch registers soc: aspeed: lpc: Add G6 compatible strings ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string Cédric Le Goater (21): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600 mtd: spi-nor: aspeed: Disable zero size segments on the AST2600 /dev/mem: add a devmem kernel parameter to activate the device Eddie James (5): i2c: aspeed: Add AST2600 compatible hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call hwmon: (pmbus/ibm-cffps) Fix LED blink behavior hwmon: (pmbus/ibm-cffps) Add version detection capability ARM: dts: aspeed: rainier: Switch PSUs to unknown version Fran Hsu (4): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree. ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Jae Hyun Yoo (13): ARM: dts: aspeed: peci: Add PECI node clk: ast2600: enable BCLK for PCI/PCIe bus always dt-bindings: Add PECI subsystem document Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add bindings document of Aspeed PECI adapter ARM: dts: aspeed: Add PECI node peci: Add Aspeed PECI adapter driver dt-bindings: mfd: Add Intel PECI client bindings document mfd: intel-peci-client: Add Intel PECI client driver Documentation: hwmon: Add documents for PECI hwmon drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Joel Stanley (9): ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: aspeed: ast2600evb: Enable FSI master usb: gadget: Quieten gadget config message clocksource: fttmr010: Parametrise shutdown clocksource: fttmr010: Set interrupt and shutdown clocksource: fttmr010: Add support for ast2600 watchdog: aspeed: Fix clock behaviour for ast2600 ARM: config: aspeed: Update defconfigs Revert "ARM: dts: aspeed: peci: Add PECI node" Johnny Huang (6): pinctrl: aspeed-g6: Add AST2600 I3C1 and I3C2 pinmux config pinctrl: aspeed-g6: Add support for the AST2600 USB pinmux pinctrl: aspeed: Add ASPEED_SB_PINCONF() helper pinctrl: aspeed: Move aspeed_pin_config_map to separate source file pinctrl: aspeed: Use masks to describe pinconf bitfields pinctrl: aspeed-g6: Add AST2600 pinconf support Tali Perry (2): dt-bindings: i2c: npcm7xx: add NPCM I2C controller documentation i2c: npcm: Add Nuvoton NPCM I2C controller driver Tomer Maimon (12): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: configs: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree dt-bindings: peci: add NPCM PECI documentation ARM: dts: npcm7xx: Add PECI node peci: npcm: add NPCM PECI driver (From meta-aspeed rev: 6d863dd22836673ccd2a5d40778a3d5e4e03d7ea) Change-Id: I8f43925375c26bc88f94eee13430fcb03252b8ca Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-12-12linux-aspeed: Move to 5.3.15Joel Stanley1-2/+2
This includes security and bug fixes from the 5.3.12, 5.3.13, 5.3.14 and 5.3.15 stable releases. This is the final 5.3 bump. The openbmc kernel will now move to 5.4. (From meta-aspeed rev: d3ba96954bb98db97c4c4bc2df730c547f17a391) Change-Id: I3e3d4d3d1456bd00f91705a52eb1801fc6293168 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-12-12linux-aspeed: I2C and PCIe clk fixes for ast2600Joel Stanley1-1/+1
Eddie James (1): i2c: aspeed: Prevent state corruption for IRQ with no status Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always (From meta-aspeed rev: 1dd494c9cdf700c0d0798412e93fef106512994d) Change-Id: If896243ce9c0d58948e7882ab9dbe5257608c997 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-13linux-aspeed: Move to 5.3.11Joel Stanley1-2/+2
This includes security and bug fixes from the 5.3.11 stable release. (From meta-aspeed rev: 600115a9ea0f149133aa57fb74e1df85de5f539a) Change-Id: I2c77fd292ed926f040fd84b3f4185a4745ba18e0 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-13linux-aspeed: IBM CFPSS fixesJoel Stanley1-1/+1
Eddie James (4): hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call hwmon: (pmbus/ibm-cffps) Fix LED blink behavior hwmon: (pmbus/ibm-cffps) Add version detection capability ARM: dts: aspeed: rainier: Switch PSUs to unknown version (From meta-aspeed rev: 550a844a351d7ea7839be2694183494704135ac0) Change-Id: I993055b81988301100f6caf4ec4807a08d56f07a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-11linux-aspeed: Move to 5.3.10Joel Stanley1-2/+2
This includes security and bug fixes from the 5.3.9 and 5.3.10 stable releases. (From meta-aspeed rev: f9f133f38f91fa0dec84231d3adb218107ca95b9) Change-Id: Ida28b36e9f23c4499396f5c71024590823d556d5 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-11linux-aspeed: AST2600 evb i2c and watchdog fixJoel Stanley1-1/+1
Joel Stanley (2): ARM: dts: aspeed: ast2600evb: Enable i2c buses watchdog: aspeed: Fix clock behaviour for ast2600 (From meta-aspeed rev: 66f4afb68e1d595e5d9ed71d2a117c9997875273) Change-Id: If5a825dcb180c47271f77e14a8752923f4dd2507 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-07linux-aspeed: AST2600 timer supportJoel Stanley1-1/+1
Joel Stanley (4): ARM: dts: aspeed-g6: Add timer description clocksource: fttmr010: Parametrise shutdown clocksource: fttmr010: Set interrupt and shutdown clocksource: fttmr010: Add support for ast2600 (From meta-aspeed rev: 1ceef9cd25228b5a24999ba0219450c6dce9b094) Change-Id: I3c7c2ea9e48a732241a1123b1b86bb7ef1b6c669 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2019-11-04linux-aspeed: FSI byte and halfword acessesJoel Stanley1-1/+1
Andrew Jeffery (2): fsi: aspeed: Fix OPB0 byte order register values trace: fsi: Print transfer size unsigned Joel Stanley (8): fsi: aspeed: Implement byte and half word writes fsi: aspeed: Implement byte and half word reads fsi: move defines to common header fsi: aspeed: Fix types in debugfs fsi: aspeed: Fix link enable fsi: aspeed: Fix whitespace in check_errors fsi: aspeed: Use defines for port reset fsi: aspeed: Clean up defines and documentation (From meta-aspeed rev: 0ee4f43eb4d886802161e70891b44093376c3985) Change-Id: I999c1c0437ee501a0c38808763a7137b67af7c2a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-16 02:53:29 +0300