Age | Commit message (Collapse) | Author | Files | Lines |
|
These patches bring SHA512 support to the FIT in u-boot, SPL and
mkimage. The majority of the feature comes in with "Add support for
SHA384 and SHA512", while the rest are relevant bugfixes that have been
made to master since v2019.04.
There is not yet a change to the configuration to enable the new
algorithm and therefore only a minor image size change (an increase of
247 bytes due to "image: Check hash-nodes when checking configurations").
Harald Seiler (1):
common: hash: Remove a debug printf statement
Heinrich Schuchardt (1):
image-fit: fit_check_format check for valid FDT
Joel Stanley (1):
ast2600: spl: Include RAM loader in BL2 ifdef
Patrick Doyle (1):
rsa: reject images with unknown padding
Reuben Dowle (1):
Add support for SHA384 and SHA512
Simon Glass (3):
image: Be a little more verbose when checking signatures
image: Return an error message from fit_config_verify_sig()
image: Check hash-nodes when checking configurations
Change-Id: I69d7ac29d8c4d710c57fc6a45b1c48022e6808c0
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This turns on FIT signature verification ("vboot") features in the
ast2600_openbmc_spl_emmc_defconfig.
A signed FIT will be checked by the loader (either SPl or u-boot
proper).
Heinrich Schuchardt (1):
fit: check return value of fit_image_get_data_size()
Joel Stanley (4):
ast2600: Allow selection of SPL boot devices
config: ast2600: Reduce SPL image size
ast2600: Modify SPL SRAM layout
config: ast2600: Enable FIT signature verification
Change-Id: If0974fffc63072dc922b3bc5899a791adcdb40a3
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379
for details about why this is necessary.
(From meta-aspeed rev: 2ccde15eaa30d283c13fba2a4bae5bbd44a6fa23)
Signed-off-by: Ed Tanous <ed@tanous.net>
Change-Id: Ifb6e1ccf75b235c162be8820b6ba0868ce379028
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
George Liu (2):
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
mustafa (1):
hwmon: (pmbus) Add support for ADM1266
(From meta-aspeed rev: 53deac894a40ade7bf58fffac15f04f1b278c7f8)
Change-Id: I723f161a58f12a5a4ef64b575fa36fe58b38dd4c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Quan Nguyen (1):
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Ryan Sie (1):
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
(From meta-aspeed rev: b276b99c1a93e9353db49f67514e8294216b455a)
Change-Id: I77c674b155c0444ad6725914a72fe75883004575
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Two backports from u-boot master relating to SPL signaturues, and a
patch from Hongwei that was sent to the upstream list.
Heiko Stuebner (2):
spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE
spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE
Hongwei Zhang (1):
Common:fdt: Check for error return value
(From meta-aspeed rev: e173b53d6d29d1489853379d78649f70420ca4c7)
Change-Id: I1ad719b86de2a110fef44a27c584e74faedc5748
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (6):
ARM: dts: tacoma: Fix node vs reg mismatch for flash memory
ARM: dts: tacoma: Zero-pad flash memory region length
ARM: dts: rainier,tacoma: Fix size comment whitespace
ARM: dts: rainier, tacoma: Comment reserved memory regions
ARM: dts: rainier: Add reserved memory for ramoops
ARM: dts: tacoma: Add reserved memory for ramoops
Konstantin Aladyshev (3):
ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3
ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality
ARM: dts: aspeed: amd-ethanolx: Add GPIO line names
(From meta-aspeed rev: 521b4bb4e011a86f27f1ef0f519cb3d161f8da35)
Change-Id: I89a98cd464b4e4ae57bdad64126112a13f95723a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
spi: fsi: Fix transfer returning without finalizing message
(From meta-aspeed rev: 10fcd21efd04d5e109ef4354fe397ddc3bb3c9ea)
Change-Id: I9685586b10029a6e7ae7d61b93170aeaa2aaa93b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This adds a new configuration ast2600_openbmc_spl_emmc_defconfig that
can be used on either emmc or nor systems. Note that it will try to
locate the environment on emmc, so use on nor-only systems will always
use the default environment.
Machines that wish to use this configuration should set UBOOT_MACHINE in
their <machinename>.conf.
Eddie James (3):
ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters
arch: ARM: Aspeed: Add SPL eMMC partition boot support
configs: Add AST2600 SPL eMMC configuration
(From meta-aspeed rev: 1a970c012150cee8e5d937716f33e4f1c2e85e02)
Change-Id: I53f6b39579529f7bb6d98f4ee9a3cb067dc75cb5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The next release of Yocto is soon and most of the upstream
layers have switched support strings for it. Support layer
compat for gatesgarth (current) and dunsfell (previous).
(From meta-aspeed rev: 3cc1749d59f84cb441fdcf5490cbbecac7227caf)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I732a58adeef210b4975560c0d9607da79524dfa1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (2):
ARM: dts: aspeed: rainier: Add 4U device-tree
ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted
Joel Stanley (1):
net: ftgmac100: Ensure tx descriptor updates are visible
(From meta-aspeed rev: 1e79f32e8571974816a086a330f270889ebe4d39)
Change-Id: I1289cd2c5240a3cdb4eddb88b794a1efd886885b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.15, 5.8.16 and
5.8.17 stable releases.
(From meta-aspeed rev: 07d964972facc7d233f034f0bbdaea1c66e225b4)
Change-Id: Ib6b7a9828e596f4f51f614b0db746a080d6ff5d5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
George Liu (1):
ARM: dts: Fix label address for 64MiB OpenBMC flash layout
John Wang (1):
ARM: dts: aspeed: g220a: Add some gpios
(From meta-aspeed rev: 95ee7821d9291e3696297990c330cce9a0e26966)
Change-Id: Ice312e449e774c000e4bf572b0e99bfe77c14b92
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: kprobes: Avoid fortify_panic() when copying optprobe template
Dylan Hung (1):
net: ftgmac100: Fix Aspeed ast2600 TX hang issue
(From meta-aspeed rev: 5d598c61c64dd7b70f50c87e53e274445f57481a)
Change-Id: I3ca12a28d8b5178f64f7d5cc37e5c515d75921c1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Dan Carpenter (1):
soc: aspeed: xdma: Return -EFAULT if copy_from_user() fails
Joel Stanley (1):
drm/aspeed: Add sysfs for output settings
(From meta-aspeed rev: 772d6152ba68fecbe60f29d0555adc5f9e46d7cf)
Change-Id: Ib38acc30a4d1dd6d98d1f1ae566d537c59d06c0b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.13 and
5.8.14 stable releases.
(From meta-aspeed rev: 9793d740db96120560c79d53907ff43afecca503)
Change-Id: I8d3c6ca3084ae393ff775766b8be84c8ed722b2b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (2):
ARM: config: Enable PSTORE in aspeed_g5_defconfig
ARM: dts: aspeed: rainier: Don't shout addresses
Eddie James (1):
fsi: Aspeed: Add mutex to protect HW access
John Wang (1):
ARM: dts: Add 64MiB OpenBMC flash layout
Konstantin Aladyshev (1):
ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 binding
Lotus Xu (1):
ARM: dts: aspeed: Add Bytedance g220a BMC machine
Zev Weiss (2):
peci: fix error-handling in peci_dev_ioctl()
peci-cputemp: label CPU cores from zero instead of one
(From meta-aspeed rev: 282f8ce537d65b0e2fd00eca91e637518e97a64e)
Change-Id: Ie63530abe3e2c26e58597e8c9e78fd01a3e8dd4f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and
5.8.12 stable releases.
The previous commit did not bump to a version containing these fixes.
(From meta-aspeed rev: 8d37078a9d3cfb22ada2ad4d052449fc8a2e4f0b)
Change-Id: I3a210e76e52d350d3e45345ad0c3c383990961da
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and
5.8.12 stable releases.
(From meta-aspeed rev: 20431851af835631f4cbe479d958f565ebef781b)
Change-Id: Ib6965a9176d578cbc5eda2384928f17584c6cddc
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Joel Stanley (1):
net/ncsi: Disable DEBUG
(From meta-aspeed rev: 59eb0deec79fa1939a450e74b416b75591b47788)
Change-Id: Ib3f7695606a936b86a8ff885ab2a5c9598eae736
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
As ASPEED develop their ast2600 u-boot features, we've had a need to
integrate changes from their tree into the openbmc tree. In the past
we lined this up with a major version bump (as with the kernel),
meaning we could create a new branch with our "out of tree" changes
applied on top. However, in this case their SDK is still based on the
2019.04 release, so there's not a clear way forward.
I've chosen to rebase the openbmc changes on top of their branch. The
old branch is still accessible at archive/v2019.04-aspeed-openbmc-1.
The bitbake recipe will continue to work as it uses the nobranch=1
flag, and specifies the version based on the SHA.
The new branch contains their aspeed-master-v2019.04 tree as of today,
with the OpenBMC changes applied on top.
The ASPEED changes include:
- support for the ast2400
- Disable of buggy AXI prefetch feature
- SPL, OTP and secure boot fixes
- SPI flash updates and calibration changes
- eMMC, Ethernet, fixes
I've boot tested it running from SPI NOR on AST2600 A1 hardware, as
well as QEMU, and it reached userspace. I will bump the bitbake recipe
to integrate the changes into openbmc.
Andreas Dannenberg (1):
spl: Make image loader infrastructure more universal
Chia-Wei, Wang (18):
config: ast2600: Enable board early initialization
ARM: dts: ast2600: Revert dm-pre-reloc property from eMMC
configs: ast2600-slt: Change DRAM speed to 1600Mbps
spl: fit: Separate FIT image load and processing
spl: ast2600: Fix the load buffer address
Revert "spl: fit: Separate FIT image load and processing"
Revert "add LPC/eSPI storngest Driving Strength"
configs: ast2600-slt: Add ENV default configuration
aspeed: Fix compile warning
ast2600: Remove AXI-prefetch support
wdt: ast2600: Fix reset mask setting
spl: ast2600: Add secure boot flow support
update bootflow
fix boots address
configs: ast2600-fpga: Fix defconfig and header
ARM: spl: Add SPL relocation support
spl: ast2600: Add relocation support
ARM: timer: ast2600: Add dynamic frequency detection
Chin-Ting Kuo (22):
spi: timing: Change timing calibration method
spi-flash: w25q01jv flash model support
spi-flash: aspeed: Remove unused variable
spi: Add w25q512jvfm flash model
boot: emmc: Boot from eMMC feature early porting
emmc: Move "u-boot,dm-pre-reloc" flag to evb.dts
spi-nor: Add flash model w25q01jvfim and fix typo
mmc: SD: Add property for timing phase and drive type
mmc: slt: Add timing phase and drive type for MMC
spi: cpuinfo: Add ABR, spi_aux_pin info
spi: crypress: Set 4B mode to controller when address width is 4
spi: AST2500: Modify ABR boot source log
spi: scu_info: Simplify scu info log related to fmc/spi
spi: ast2500: Porting spi1 setting
spi-flash: Set FMC04/SPIR04[6:4] when enter 4B mode
spi-flash: Use user mode under specific condition
spi-flash: Modify SPI/FMC CE1 default decode address
fpga: fixbug: Remove CONFIG_BOARD_EARLY_INIT_F
dp: Update dp base address
spi: bugfix: Do not change read command until flash probe
fmc: Set FMC50[1] for waiting WIP idle
eMMC: Do not fill FMC50[1] when boot from eMMC
Dylan Hung (18):
add rmii rclk oe control
add rmii rclk pin control
add board_ram_info for ast2600 series
move borad_add_ram_info to borad_common.c
fix FPGA RGMII pin setting
revise fpga mac device
fix typo
don't print message in sdramphy_init
write scu config back if vga config is "0"
refactor code: add macro for ECC setup
trim tailing whitespaces
don't re-init ecc if dram has been initialized
fix ncsi build
don't reserve VGA memory if efuse bit is set
fix fpga booting
add ast2650 fpga config
remove dram initialization from platfrom.S
remove mac init from platform.S
Joel Stanley (7):
dts: ast2600-evb: Enable FSI masters
aspeed: Add machine names
tools: Add script for generating recovery image
configs: Add OpenBMC spl defconfig for AST2600 boards
clk: ast2600: Add divisor settings for 100MHz PLL
ram: ast2600: Enable device tree based DDR config
ast2600: tacoma: Run DDR at 1333
Johnny Huang (37):
otp: remove print process
otp: ignore data region last 2 dw when program
otp: program 2 dw then verify 2 dw when program data region
otp: skip print data info when no key
otp: set default value for otp strap programming
rng: add aspeed rng cmd
spl: fix duplicate define CONFIG_SYS_MONITOR_LEN
defconfig: cot: reduce spl code size
config: remove tftpput
secure boot: fix hace reset and compile warning
clk: rsa clock source set to hpll
update otp patch code
otp update
otp: udpate program
otp: udpate strap
otp: update strap program bit
otp: udpate strap read
otp: reduce the code
spl: ast2600: update secure boot flow
defconfig: ast2600: update spl config
spl: aspeed: fix ecc build
secure: update bl2 verify
secureboot: update bl3 verify
aspeed: emmc: support emmc boot
defconfig: support new boot flow
defconfig: rename ast2600a1 as defaut config
fix merge error
defconfig: aspeed: update ecc config for new boot flow
Revert "defconfig: aspeed: update ecc config for new boot flow"
defconfig: aspeed: update ecc config for new boot flow
otp: fix ast2600a1 info
defconfig: enable position independent to support boot from uart
config: enable CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK as default for ast2600
boot0: aspeed: add image size header for boot form sram
cmd: otp: udpate for ast2600a2
update ast2600a2 otp register setup
otp: fix compile warning and add strap info
Peter Robinson (1):
Remove redundant YYLOC global declaration
ryan_chen (40):
add link status
update gpio driver
fix i2c pinctrl
update sd/emmc controller source
update
add ibm platform
add kconfig for env
add ast2600 openbmc defconfig
fix env compile error
update pcie driver
mv to cmd/aspeed folder
update for mv cmd/aspeed folder
add pll test
update full test
update clk
add display port driver
add ast2600 defconfig
update mac info
update dp driver
update hclk setting
update axi ahb div cal
update dp firmwire
add more desciption about eMMC clk source
update file mode
update ast2400 have 32kbyte
add ast2400 ompatible
add ast2400
add reset for ast2400
add ast2400 include file
add ast2400 board
add ast2400 defconfig
add ast2400 pinctrl
update ast2400 reset
add ast2400 clk
add ast2400 defconfig
update ast2500
add mac for ast2400
add for ast2400
add ast2400 clk
Video format look-up table is updated for 640x480@85Hz
(From meta-aspeed rev: 9d5ae052312dc45a645dc5e7ab8a9daf4ef686d6)
Change-Id: I50a06ca91d86f4548d47e85e215ace4498c0c9a8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (5):
hwmon: (pmbus) Expose PEC debugfs attribute
pinctrl: aspeed: Format pinconf debug consistent with pinmux
pinctrl: aspeed: Use the right pinconf mask
pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks
ARM: dts: rainier: Disable internal pull-downs on eMMC pins
(From meta-aspeed rev: c6a057b489fc7087f00abdbda682489e7a2e3318)
Change-Id: Ie4d9c5d6519e340fcd7cbca9a32d733f934a271f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Change Iee340ffd294c4f40ba3360acd3f750d886865608 introduced a
machine feature which communicates to recipes if a hw random
number generator is present. Since the Aspeed chips have a
supported RNG, enable this MACHINE_FEATURE.
(From meta-aspeed rev: 57caacd62ae6037119be32c608be6ae4e548e639)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I275ca0fc1445c782ea6b10e3807e3b339fead53b
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.6, 5.8.7 and 5.8.8
stable releases.
(From meta-aspeed rev: 3bad2091835b6054b7ba1a2f016b9c125a1ce440)
Change-Id: I4a1c370c1760ab0a273a88c836289b83e5ee44ca
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Enable I2C slave mode in ast2500 and ast2600 kernel config.
Eddie James (5):
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
i2c: aspeed: Mask IRQ status to relevant bits
ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device
ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device
(From meta-aspeed rev: 6204d930bc5b9df98192843227abac29946f75df)
Change-Id: I2b66eb5192fabb8562af2327ef5afe3ef3fc33d9
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.8.1, 5.8.2, 5.8.3,
5.8.4 and 5.8.5 stable releases.
(From meta-aspeed rev: d70b397ee265c7cd3d6e4678b86009e9d7127446)
Change-Id: Ieb305bf268a1044f1682992c3e1e0153aac08747
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: Aspeed: Rainier: Enable XDMA engine
Vishwanatha Subbanna (2):
ARM: dts: aspeed: rainier: Add Operator Panel LEDs
ARM: dts: aspeed: rainier: Add directly controlled LEDs
(From meta-aspeed rev: f4c4262172c24e2727f51e6bc0518173fd45c0e4)
Change-Id: Iacca07cde2dceff014997ebcab980b7e65bce60a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Brad Bishop (4):
spi: fsi: Handle 9 to 15 byte transfers lengths
spi: fsi: Fix clock running too fast
spi: fsi: Fix use of the bneq+ sequencer instruction
eeprom: at25: Split reads into chunks and cap write size
Eddie James (3):
dt-bindings: fsi: fsi2spi: Document new restricted property
spi: fsi: Implement restricted size for certain controllers
spi: fsi: Check mux status before transfers
(From meta-aspeed rev: f4b7c1c8227d54a4b805479132b32227113c77d7)
Change-Id: I501829de26fba8d2bfd7440483015380192d2c50
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the OpenBMC kernel tree to a 5.8 base. It has beent two
weeks since the kernel was last updated, making it the quickest bump in
OpenBMC history.
There are 93 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs were updated to fix selection of video device. An
upstream reorganisation of the V4L kconfig resulted in a large number of
extra drivers enabled when all we required was VIDEO_ASPEED.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (13):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
Ben Tyner (1):
ARM: dts: aspeed: witherspoon-128: Remove checkstop GPIO from gpio-keys definitions
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (10):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
ARM: dts: aspeed: ast2600evb: Add MAC0
soc: aspeed-lpc-ctrl: Fix printf warning
ARM: configs: aspeed: Update defconfigs
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of video device
mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths"
ARM: aspeed: g5: Do not set sirq polarity
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: 3c9616235643263beea47ef5db5cecafa3349c2e)
Change-Id: I4616f47026e00e49bda0abb1fc586dd2faabee30
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Somehow this was not enabled. It is required for Witherspoon 128, Tacoma
and Rainier.
(From meta-aspeed rev: a7bbd475453768037877c820caed02f39055eb6e)
Change-Id: Ie80479aa455c18c921387b23586cff3e7bc79204
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Zane reported that gcc 10 will fail to build the branch. This is the
upstream fix.
Peter Robinson (1):
Remove redundant YYLOC global declaration
(From meta-aspeed rev: 6630a1310fd9b17abdd8fca73f5c22fc346f9c8a)
Change-Id: Ie72bb58c5c7684e42951e80ce6f80e98ef4f15fe
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.11 and
5.7.12 stable releases.
(From meta-aspeed rev: ea33f9ced2354a75d8918a3c7e61ca56f67e21df)
Change-Id: Iaa9bd005a8897ab5e9a1148145c02d6fbb8603fa
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Populate the hostfw partition by specifying the directory to be
used as source for the filesystem. This directory is populated
by a bbappend to the hostfw recipe.
(From meta-aspeed rev: 37f30af4e377a6bc2d3c47ca435798969321f566)
Change-Id: Id64e0ac6a5082be2b3ad689a6b323da8eb094e69
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Tyner (1):
Remove checkstop GPIO from gpio-keys definitions
Eddie James (9):
mmc: sdhci-of-aspeed: Fix clock divider calculation
fsi: master: Add boolean parameter to link_enable function
fsi: core: Disable link when slave init fails
fsi: core: Set slave local bus ownership during init
ARM: dts: aspeed: rainier: Switch OCCs to P10
ARM: dts: aspeed: rainier: Enable EHCI controller
ARM: dts: Aspeed: tacoma: Enable EHCI controller
fsi: master: Remove link enable read-back
ARM: dts: aspeed: rainier: Add CFAM SPI controllers
Joel Stanley (2):
mmc: sdhci-of-aspeed: Revert "Prevent clock divider of zero"
ARM: dts: aspeed: rainier: Add FSI I2C masters
(From meta-aspeed rev: 4171a5eaa18f59cd4eef7d5dd1e7c8e548e2f78e)
Change-Id: I9aaf5fd3cbf6ba1ab7acf6dbc66588b6367f1049
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Some platforms make use of it.
(From meta-aspeed rev: 132487e2ee60e4b167c07fb63093e0ac493a3fbb)
Change-Id: I8752df5f9b4b195e605676a398cfdf1510b11008
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Jeffery (1):
ARM: dts: rainier: Describe GPIO mux on I2C3
Joachim Fenkes (2):
fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE
fsi/sbefifo: Fix reset timeout
Joel Stanley (4):
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
fsi: aspeed: Support CFAM reset GPIO
ARM: dts: aspeed: rainier: Add CFAM reset GPIO
ARM: dts: aspeed: tacoma: Add CFAM reset GPIO
(From meta-aspeed rev: ee96b77b00dbbc7cbf598dde0008c2ba96eb8d28)
Change-Id: Ie73ef89d795e49a8f9bbef11261ae78d2b986e4a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.7.10 stable release.
(From meta-aspeed rev: 69ec802b7b04b61203c81778f695a9dad7a2d0d4)
Change-Id: I63b8b9773b0d49114e892bd0d57b95e6ad8cc516
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Joel Stanley (1):
spi-nor: Remove unused file
(From meta-aspeed rev: 7e2a5cd6ae49c669168c18e897d87e29a9b9244b)
Change-Id: I7489f4a9bc3e8018830956a019b0ad24c1cc2a7f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This updates the OpenBMC kernel tree to a 5.7 base. It has been three
releases since the kernel was updated, making it over 9 months of
development time. The stable releses up to v5.7.9 are integrated in this
bump.
There are 106 out of tree kernel patches carried in the OpenBMC tree.
The defconfigs are regenerated with one change made to enable debugfs,
as it will default to off with the new kernel without explicitly
enabling it, and some platforms (eg Witherspoon) reply on it being
enabled.
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Geissler (1):
ARM: dts: tacoma: Add KCS node for LPC MCTP
Andrew Jeffery (14):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
pinctrl: aspeed: Improve debug output
soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned
misc: Add ASPEED KCS driver for MCTP purposes
ARM: dts: witherspoon: Add KCS node for LPC MCTP
pinctrl: aspeed: Describe the heartbeat function on ball Y23
ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Brad Bishop (4):
ARM: dts: aspeed-g6: Expose SuperIO scratch registers
soc: aspeed: lpc: Add G6 compatible strings
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
Cédric Le Goater (22):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600
mtd: spi-nor: aspeed: Disable zero size segments on the AST2600
spi-nor: aspeed-smc: Detect 4b opcodes differently
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (21):
ARM: dts: rainier: Add KCS node for LPC MCTP
ARM: dts: aspeed: Add witherspoon-128 machine
fsi: aspeed: Enable 23-bit addressing
clk: ast2600: Fix AHB clock divider for A1
dt-bindings: fsi: Add P10 OCC device documentation
fsi: occ: Add support for P10
hwmon: (occ) Add new temperature sensor type
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
ARM: dts: aspeed: rainier: Add second cfam on the hub
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
ARM: dts: aspeed: ast2600: Update XDMA engine node
ARM: dts: aspeed: ast2500: Update XDMA engine node
ARM: dts: aspeed: witherspoon: Enable XDMA engine
ARM: dts: aspeed: tacoma: Enable XDMA engine
clk: AST2600: Add mux for EMMC clock
mmc: sdhci-of-aspeed: Prevent clock divider of zero
leds: pca955x: Add an IBM software implementation of the PCA9552 chip
Fran Hsu (3):
ARM: dts: nuvoton: Add NPCM730 common device tree
ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
ARM: dts: nuvoton: Add Quanta GSJ BMC
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Jae Hyun Yoo (12):
clk: ast2600: enable BCLK for PCI/PCIe bus always
dt-bindings: Add PECI subsystem document
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add bindings document of Aspeed PECI adapter
ARM: dts: aspeed: Add PECI node
peci: Add Aspeed PECI adapter driver
dt-bindings: mfd: Add Intel PECI client bindings document
mfd: intel-peci-client: Add Intel PECI client driver
Documentation: hwmon: Add documents for PECI hwmon drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Joel Stanley (13):
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree
ARM: dts: nuvoton: Update EVB for new PECI layout
ARM: dts: nuvoton: evb: Rework enabling of nodes
soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600
fsi: aspeed: Support cabled FSI
fsi: aspeed: Run the bus at maximum speed
fsi: aspeed: Add module param for bus divisor
ARM: dts: aspeed: ast2600evb: Add MAC0
ARM: configs: aspeed: Update defconfigs
hwmon (peci-dmmtemp): Fix 'sizeof' warning
soc: aspeed-lpc-ctrl: Fix printf warning
Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions"
Tomer Maimon (11):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine.
dt-bindings: peci: add NPCM PECI documentation
peci: npcm: add NPCM PECI driver
(From meta-aspeed rev: a1d8d7791b8257b85eb85d73f08c2961c8c94f16)
Change-Id: I84ae1a28349144db398b7a43e0a2951c1eee434d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Generate a default environment to boot an eMMC based on a txt
file. Populate the generated environment image into the eMMC.
(From meta-aspeed rev: fdc603c73b2dc8851ce2d1684e9c71a5ce51a5b8)
Change-Id: I93944b183b7907202b02854e931593d62603ae77
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Create a fw_env.config for eMMC with a redundant environment
based on the mmc distro feature. The environment is located in
the first eMMC partition in the User Data area.
(From meta-aspeed rev: 3aa2db46e8097aa0a9627684686ca56b5d6b9872)
Change-Id: I6e768e308f03513c6cf394a0adc7110d17322d49
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The U-Boot SPL and U-Boot proper would be programmed to the
Boot Area Hardware Partitions of the eMMC. The kernel and user
space would go into the User Data Area. This commit creates an
image that can be programmed into that User Data Area. Layout:
--- - ----- -------- -------- ----- ------- ------ -------- -------
|GPT| | env | boot-a | boot-b | fs-a | fs-b | rwfs | hostfw |GPT-sec|
--- - ----- -------- -------- ------ ------ ------ -------- -------
^ 1MB 64MB 64MB 1GB 1GB 7GB 5GB
|
0x5000
Primary GPT size (Beginning of image):
512B (Protective MBR) + 512B (Primary Header) + 16KB (Primary Table)
First partition (u-boot-env) is 4K-aligned, which puts it at offset 0x5000
Secondary GPT size (End of image):
16KB (Secondary Table) + 512B (Secondary Header)
Since the secondary GPT is expected to be at the end of the device,
the initramfs can issue a "sgdisk -e /dev/mmcblk0" on first boot
to move it to the end.
The first partition holds the U-Boot environment. The following two
partitions hold a filesystem with the fitImage file. Code update
would reflash the full filesystem with the fitImage during an update.
U-Boot can then be programmed to look for the kernel in partitions
boot-a or boot-b.
The remaining is a set of ext4 filesystems for user space, read-write,
and host firmware.
The size for the host firmware partition is configurable to be able
to build an image of different size. The reason is that the tacoma
system is has a User Data area just 1GB smaller than rainier.
Design doc: https://gerrit.openbmc-project.xyz/c/openbmc/docs/+/28443
Tested: Adding "WKS_HOSTFW_SIZE = "4G"" to the tacoma.conf file
created a 14GB wic file:
$ ls -lh *wic
-rw-r--r-- 1 anoo 532919 15G Jul 14 08:18 obmc-phosphor-image-rainier.wic
-rw-r--r-- 1 anoo 532919 14G Jul 14 08:36 obmc-phosphor-image-witherspoon-tacoma.wi
$ wic ls obmc-phosphor-image-rainier.wic
Num Start End Size Fstype
...
7 9798963200 15167672319 5368709120 ext4
$ wic ls obmc-phosphor-image-witherspoon-tacoma.wic
Num Start End Size Fstype
...
7 9798963200 14093930495 4294967296 ext4
(From meta-aspeed rev: b8a647297e3f9fe724f8ee1736bb9da3806d788e)
Change-Id: I18b8a15ac8eddb6abfbc7b70429ef45ffc170d9a
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Needed for SPI-attached eeproms.
(From meta-aspeed rev: b64781c123543c5cbfecb81d974e82716545b099)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: I5a931b742661d62790199afdd20dac5ef5935ad3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.45, 5.4.46, 5.4.47 and
5.4.48 stable releases.
(From meta-aspeed rev: c3bc610a79d6b35f6b3c1707c86ca89922a4fad5)
Change-Id: I2839dcb68dbb1ed011adf236352add86e7e50d09
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Eddie James (1):
ARM: dts: aspeed: rainier: Add second cfam on the hub
Joel Stanley (1):
ARM: dts: aspeed: ast2600evb: Add MAC0
(From meta-aspeed rev: d13ebb3c7ca5dabd083bfa4d7dfa1897e9b77048)
Change-Id: I9b4b1e70b67f6017f736cac85f010c8f3a4ba69e
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Alejandro Enedino Hernandez Samaniego (1):
libfdt: Make it compatible with newer dtc
(From meta-aspeed rev: 724b95b0ed5b41f28b2f5926c209dace73a9b336)
Change-Id: I9ca8614fe5127e6875386745780ca3c3c607d168
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.44 stable release.
(From meta-aspeed rev: ec813222ab8916603ce96d76f99c967d6d67110b)
Change-Id: I911e44daeee1c8c507b744a002979cd82c5a114b
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Ben Pai (1):
ARM: dts: aspeed: mihawk: Add aliases for i2c and add thermal sensor
Ben Tyner (2):
ARM: dts: aspeed: rainier: Add line-name checkstop
ARM: dts: aspeed: tacoma: Remove checkstop gpio-key
Eddie James (5):
i2c: fsi: Fix the port number field in status register
i2c: fsi: Prevent adding adapters for ports without dts nodes
dt-bindings: soc: aspeed: xdma: Update to v11 upstream
soc: aspeed: xdma: Update to v11 upstream
ARM: dts: aspeed: Update XDMA to v11 upstream properties
(From meta-aspeed rev: 6b226ab7f77c76db68e3d9e70b0f1a5c1dde514d)
Change-Id: I272058c5e0dd5ca12b17379d1bf4f94f5a7ba290
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.40, 5.4.41, 5.4.42,
and 5.4.43 stable releases.
(From meta-aspeed rev: e491b87b48ae956b3b40cc93a1a4102a0841f8b1)
Change-Id: I23cc7318d2d28e6dff73ebf2fd4707702fe3c382
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 5.4.39 stable release.
It also includes a revert of the inital workaround for interrupt
behaviour on AST2600's I2C master as 5.4.39 contains an upstream fix.
Joel Stanley (1):
i2c: aspeed: Revert initial IRQ workaround
(From meta-aspeed rev: ac403399d5fbed4eba4a1587c9cfc2bb30cfd07a)
Change-Id: I84376e84e55ce22498442f3d24877805ec22c8d6
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|