Age | Commit message (Collapse) | Author | Files | Lines |
|
This includes security and bug fixes from the 5.0.4 stable release.
(From meta-aspeed rev: d9dc0f8226063e1b4c4b06cc78a83186af2001e9)
Change-Id: Ie8ccf4f8d7ffc8951fed09479b3ff4759389ae94
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add all the required pieces for the video engine driver. This does add
almost 70Kb to the kernel image though.
(From meta-aspeed rev: 1ae8b49f1e625619e6f48b95b82f9e1d404331b3)
Change-Id: I83d2cb8bd14343f5113bbd35a4b8634e5341f03f
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Out of tree patches include 96 files changed, 18067 insertions and 144
deletions (most lines coming from Nuvoton patches, with the Nuvoton
device trees dominating).
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed: witherspoon: Update max31785 node
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (1):
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (7):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
/dev/mem: add a devmem kernel parameter to activate the device
ARM: dts: aspeed: Add "spi-max-frequency" property
Eddie James (1):
hwmon: occ: Fix power sensor indexing
Jae Hyun Yoo (12):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
ARM: dts: aspeed: peci: Add PECI node
Joel Stanley (16):
iio: Add driver for Infineon DPS310
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
rtc: Add ASPEED RTC driver
dt-bindings: rtc: Add ASPEED description
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: Rename flash-controller nodes
ARM: config: aspeed: Update defconfigs
Lei YU (1):
ARM: dts: palmetto: Fix flash_memory region
Mark Walton (1):
ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers
Tomer Maimon (16):
dts: npcm7xx: Modify NPCM7xx device tree
clk: nuvoton: add npcm750 clock function prototype initialization
dt-binding: mtd: add NPCM FIU controller
mtd: spi-nor: add NPCM FIU controller driver
dt-bindings: i2c: npcm7xx: add binding for i2c controller
i2c: npcm: driver for Poleg i2c controller
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
dt-binding: iio: add NPCM ADC documentation
iio: adc: add NPCM ADC driver
ARM: npcm: add defconfig for Nuvoton NPCM7xx BMC
ARM: dts: npcm7xx: Update device tree
Vijay Khemka (3):
ARM: dts: aspeed: Add KCS support for LPC BMC
ARM: dts: aspeed: tiogapass: Enable KCS
ARM: dts: aspeed: tiogapass: Add sensors
(From meta-aspeed rev: 8c718fadc62f01741dbd435fd483c1169bdfc7c8)
Change-Id: Icb4e9cc213a90f9f605134e3c0a94c478fb3f19a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 4.19.28 and 4.19.29 stable
releases.
(From meta-aspeed rev: cf1135c947f613b514dcb8707e1620cdc17f21e1)
Change-Id: I14d6537c4fce4daffd1e2e571ded383ed8c14cee
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Kun Yi (1):
hwmon: (lm75) Add MAX31725/6 support
Lei YU (1):
ARM: dts: palmetto: Fix flash_memory region
(From meta-aspeed rev: 0d30328f7a71de53f1d65e3dd45ed7dcf9aedea6)
Change-Id: I73e46e36e4faa5ed32bb937728515544958a848f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 4.19.27 stable release.
(From meta-aspeed rev: 4141fb8809bac796b9151edefd55b0ebc1c5c85d)
Change-Id: Id716fed91ea62158f47263cd5563ae7894c9d2cf
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This includes security and bug fixes from the 4.19.22, 4.19.23, 4.19.24,
4.19.25 and 4.19.26 stable releases.
(From meta-aspeed rev: 2a9b7c2a7769b1f61135ac8959c44d34c2359ca9)
Change-Id: I7521264319b66b39d31974a5e2c0ec1b8a90a661
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
USB Mass Storage will be used for implementing Virtual Media.
This adds about 800 bytes to the kernel image:
Before:
-rw-r--r-- 2 anoo anoo 2582512 Jan 22 09:57 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190122155444.bin
After:
-rw-r--r-- 2 anoo anoo 2583344 Jan 22 10:02 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190122160056.bin
(From meta-aspeed rev: f7c9426e180f46dedd04ac0b671064ba792cff28)
Change-Id: If453830f4e55c2abbb8cd703f589b7caf24fafd6
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The USB gadget is needed to implement Virtual Media.
This adds about 46kB to the kernel image:
Before:
-rw-r--r-- 2 anoo anoo 2542904 Jan 19 14:53 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190119205057.bin
After:
-rw-r--r-- 2 anoo anoo 2589648 Jan 18 10:20 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190118155445.bin
(From meta-aspeed rev: fecdb4c8ea1fee0750fe05389178b685446eb75f)
Change-Id: I98aaba221939a60407c8d5efa912237d0128c366
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add NBD support to the defconfig as this will be used to implement
virtual media on the BMC.
This adds about 5.4kB to the kernel image:
Before:
-rw-r--r-- 2 anoo anoo 2542904 Jan 19 14:53 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190119205057.bin
After:
-rw-r--r-- 2 anoo anoo 2548304 Jan 19 14:59 fitImage--4.19.16+git0+bbc22aa295-r0-witherspoon-20190119205736.bin
(From meta-aspeed rev: 1b084277f6ffedc76fece26b38e867779b5d619e)
Change-Id: I022e5f7a1067b205c83762a0aca31d77395c6d8d
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.20 and
4.19.21 stable releases.
(From meta-aspeed rev: 2702d64577033e90cdca33b08a4d99cd7e108597)
Change-Id: Ib26c3b4c61664e1b41135fe83db484da2a8e0888
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
meta-aspeed commit 054541adc3 was not applied correctly. sync up the
subtree with 054541adc3 applied correctly.
Change-Id: I3df6319c6e5f68e2d517db177928c1077dacdb85
Fixes: 1a4b7ee28bf7413af6513fb45ad0d0736048f866
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.17, 4.19.18 and
4.19.19 stable releases.
(From meta-aspeed rev: 00486f5cebee8ecfecec8638261f8215fafc924d)
Change-Id: Ia412cbe27b36d6aee87ad51c9d03e75d92414cf0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.16 stable release.
(From meta-aspeed rev: dab74120e997e9cf8db52edaab85e4584eba1551)
Change-Id: I301fb52b91229737561c4252847d16405982a15f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Mark Walton (1):
ARM: dts: aspeed: Add #interrupt-cells property to gpio controllers
Vijay Khemka (3):
ARM: dts: aspeed: Add KCS support for LPC BMC
ARM: dts: aspeed: tiogapass: Enable KCS
ARM: dts: aspeed: tiogapass: Add sensors
(From meta-aspeed rev: baaabab03733d18dbdfc55590bb2e16cef493db2)
Change-Id: Ie17ccd8b8ebd0e2263135e4984c9302628f22a66
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.15 stable release.
(From meta-aspeed rev: 8a1859716ca01a0d50c23b5b42c995167b21b33b)
Change-Id: I0c293ef152e687ad18b1137b74541ce6ecd22349
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This addresses some assumptions made by systemd about having multiple
routing table support in the kernel. systemd-networkd will try and
provision mutliple routing tables + policies and will silently break
neighbor advertisement responses due to policy configurations on a
single table.
It also adds support for SLAAC based router settings and faster
duplicate address detection.
Size impact: 4k increase
linux.bin(old): 2497656
linux.bin(new): 2502208
(From meta-aspeed rev: 55a9adbdb776b913e93a56613412f341a0c512ac)
Change-Id: I2999dab53c05d6d6d8563b20bd17eda143d5517e
Signed-off-by: William A. Kennington III <wak@google.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.14 stable release.
(From meta-aspeed rev: e61905170769568dbb4f291e4dc5d1bb733a58b2)
Change-Id: I8aeeb8f4f973a3d315bc4a247b344fe46311e8e4
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Reset the following subtrees on thud HEAD:
poky: 87e3a9739d
meta-openembedded: 6094ae18c8
meta-security: 31dc4e7532
meta-raspberrypi: a48743dc36
meta-xilinx: c42016e2e6
Also re-apply backports that didn't make it into thud:
poky:
17726d0 systemd-systemctl-native: handle Install wildcards
meta-openembedded:
4321a5d libtinyxml2: update to 7.0.1
042f0a3 libcereal: Add native and nativesdk classes
e23284f libcereal: Allow empty package
030e8d4 rsyslog: curl-less build with fmhttp PACKAGECONFIG
179a1b9 gtest: update to 1.8.1
Squashed OpenBMC subtree compatibility updates:
meta-aspeed:
Brad Bishop (1):
aspeed: add yocto 2.6 compatibility
meta-ibm:
Brad Bishop (1):
ibm: prepare for yocto 2.6
meta-ingrasys:
Brad Bishop (1):
ingrasys: set layer compatibility to yocto 2.6
meta-openpower:
Brad Bishop (1):
openpower: set layer compatibility to yocto 2.6
meta-phosphor:
Brad Bishop (3):
phosphor: set layer compatibility to thud
phosphor: libgpg-error: drop patches
phosphor: react to fitimage artifact rename
Ed Tanous (4):
Dropbear: upgrade options for latest upgrade
yocto2.6: update openssl options
busybox: remove upstream watchdog patch
systemd: Rebase CONFIG_CGROUP_BPF patch
Change-Id: I7b1fe71cca880d0372a82d94b5fd785323e3a9e7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.10, 4.19.11, 4.19.12
and 4.19.13 stable releases.
(From meta-aspeed rev: 02c7572a2aba1786a7be7f2eda29bc334830b856)
Change-Id: I61a5d6eed2cec43b8d76819ff0c1bb8c83d63f3c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Jae Hyun Yoo (12):
dt-bindings: Add a document of PECI subsystem
Documentation: ioctl: Add ioctl numbers for PECI subsystem
peci: Add support for PECI bus driver core
dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
ARM: dts: aspeed: peci: Add PECI node
peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
dt-bindings: mfd: Add a document for PECI client MFD
mfd: intel-peci-client: Add PECI client MFD driver
Documentation: hwmon: Add documents for PECI hwmon client drivers
hwmon: Add PECI cputemp driver
hwmon: Add PECI dimmtemp driver
Add maintainers for the PECI subsystem
Joel Stanley (1):
ARM: config: aspeed: Add PECI drivers
(From meta-aspeed rev: c9793688e3358ba1fb1aab7b10fc16112bbb1614)
Change-Id: Ic109bc0caf5e3e13fd4d026f787c256f72353cf0
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.9 stable release.
(From meta-aspeed rev: dab38b715595ad8b7b109d4fb7e260fd1ec5ebb0)
Change-Id: I6184a46ccfc5c2725f1178cbdec52958676940df
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
U-boot has its own FDT implementation but it isn't isolated in terms
of include search paths very well in our ~2016 snapshot.
Prior to now (December 2018) it wasn't noticeable but with the move to
yocto 2.6 and libfdt 1.4.5 the FDT implementations are different enough
that if you have libfdt headers installed on your build host (which
under Yocto, is _always_) you will have host contanmination and 2016
u-boot will fail to build.
Work was done in upstream u-boot during 2018 to address this, but
backporting would be a not-insignificant level of effort. Instead, use
the following hack until such a time that we can rebase on a more
recent (circa end of 2018) u-boot tree.
(From meta-aspeed rev: 7f8140089d95a529bf50c6c71112385607a64bcf)
Change-Id: I7513e2c651040fab55c2e500a6e801d4f5120d9d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.19.7 and 4.19.8 stable
releases.
(From meta-aspeed rev: b16d0dc6fd3af4d4ef0ad8fe6d8304efa2030ba2)
Change-Id: Ib8180d72e4fd147d0a4427ce5ac1bb9063fcff50
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The OpenBMC ASPEED kernel continues in it's quest to track upstream.
This tree is a rebase of the dev-4.18 tree on top of 4.19 witht 58 out
of tree patches.
Currently the base is 4.19.6, the latest 4.19 stable release.
The out of tree patches are as follows. Note that some of these have
landed in 4.20 or are queued for 4.21.
Adriana Kobylak (1):
ARM: config: aspeed: Add Network Block Device
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
ARM: dts: aspeed: witherspoon: Update max31785 node
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (4):
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
ARM: dts: aspeed: Add Power9 CFAM description
Brad Bishop (1):
ARM: configs: Remove atags from Aspeed G4 config
Brendan Higgins (1):
i2c: aspeed: fix invalid clock parameters for very large divisors
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (7):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
ARM: dts: aspeed: Add "spi-max-frequency" property
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (1):
fsi: sbefifo: Add missing mutex_unlock
Edward A. James (2):
drivers/fsi: Add On-Chip Controller (OCC) driver
hwmon: Add On-Chip Controller (OCC) hwmon driver
Guenter Roeck (1):
i2c: aspeed: Acknowledge most interrupts early in interrupt handler
Jae Hyun Yoo (1):
i2c: aspeed: Handle master/slave combined irq events properly
Joel Stanley (19):
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Enable VHUB on Romulus
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
ARM: config: aspeed: Add out of tree drivers
ARM: dts: Add OCC description to Power9 dtsi
rtc: Add ASPEED RTC driver
dt-bindings: rtc: Add ASPEED description
ARM: aspeed: Add RTC node
ARM: config: aspeed: Add internal RTC driver
Justin.Lee1@Dell.com (1):
net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command
Lei YU (1):
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
Matt Spinler (1):
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
Tomer Maimon (2):
dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation
pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver
Vijay Khemka (2):
net/ncsi: Add NCSI OEM command support
net/ncsi: Add NCSI Broadcom OEM command
Wolfram Sang (1):
i2c: aspeed: use proper annotation for "fall through"
YueHaibing (1):
net/ncsi: remove duplicated include from ncsi-netlink.c
(From meta-aspeed rev: d35b4f3cebfe24c6e0ba26859a10e5919d47e146)
Change-Id: I44f8cb9685d99e8a409ef60a4ead7f58f2604429
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Backport oe-core 71309a5c91209d4afaee874889fa7eefb266185f to our
recipes:
u-boot: Add missing dependency on flex and bison native
The U-Boot build, in particular the Kconfig, depends on bison and
flex native. Add the missing dependencies.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
(From meta-aspeed rev: ff2e4ed2f8f642fe54ac094c02c22166d8ee3131)
Change-Id: Icd04ad815c63149af6033d1419a1a2e180e1b728
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.18.20 stable release.
Note that 4.18 is now end of life for upstream security and bug fixes,
and systems should move to a supported release.
https://lore.kernel.org/lkml/20181121103111.GA9112@kroah.com/
(From meta-aspeed rev: 086ac084965f35133be805cc0eda579a33ccfbd6)
Change-Id: Ib62b7d4c0637041a05259a20b3276b8b88e68089
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.18.17, 4.18.18 and
4.18.19 stable releases.
(From meta-aspeed rev: 1d40d73bfbb943a43dff767690eb695f72c03072)
Change-Id: I70261f1435a1228fa73b12440ff4392c2c7f471a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Justin.Lee1@Dell.com (1):
net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command
Matt Spinler (1):
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
Vijay Khemka (2):
net/ncsi: Add NCSI OEM command support
net/ncsi: Add NCSI Broadcom OEM command
YueHaibing (1):
net/ncsi: remove duplicated include from ncsi-netlink.c
(From meta-aspeed rev: 93b98bb3f6c01a2e582187cc7e205d080fdc3bc6)
Change-Id: I9687c043d63c1ee64166d4f7dba015d8a2aba4e7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
From the kernel commit message:
For security reasons, some configuration needs to run without /dev/mem
but on some occasions, to debug HW for instance, it's still useful to
be able to reboot the system with access to physical memory.
Add a kernel parameter which activates the /dev/mem device only when
'mem.devmem' is enabled.
(From meta-aspeed rev: 0c9f70d50d2bcab214e8b49fd76df23f58d6d9da)
Change-Id: I5f4c66c9fbaece1c62c3ff4ef608a4c24505630a
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This is a noop regeneration in preparation for future changes.
(From meta-aspeed rev: 054e5fe776463b651bb5228db1639029b1d7e33a)
Change-Id: Ibe05ab6b29b4957171f781554d18cbb62645e618
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.18.13, 4.18.14, 4.18.15
and 4.18.16 stable releases.
(From meta-aspeed rev: a8be43398d14b57ce89460976552db222d2939af)
Change-Id: I157e2683820122ad6d958348c09166437c838a69
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This includes security and bug fixes from the 4.18.9, 4.18.10, 4.18.11
and 4.18.12 stable releases.
(From meta-aspeed rev: a085094a61dcfb8ba2e593a0a4feb72329ae45bf)
Change-Id: I0b8c272a19a3c3560378a5bfc875f1e3de7affa8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This is not enabled for any of the in-tree systems at this stage as they
all use an i2c battery-backed RTC.
Joel Stanley (4):
rtc: Add ASPEED RTC driver
dt-bindings: rtc: Add ASPEED description
ARM: aspeed: Add RTC node
(From meta-aspeed rev: 341ba1dd3d5128ec54c5623b829dae4001b363f6)
Change-Id: Ia9fe9ec935f8558273c1dfa3a7bbb69a5c95335f
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Joel Stanley (1):
Revert "ubifs: xattr: Don't operate on deleted inodes"
(From meta-aspeed rev: 99eff9eaca4884b1cff734f6bae60fe6b5eabe8a)
Change-Id: I5f677a38179cefb48e114a7371b7cbccf4f3bfb8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-aspeed rev: 1bab4c4a3a0f01bc5a1aff12a5774a71e532feba)
Change-Id: I4a460c4c112f829a98602ac73914cdbbcc6416f7
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Guenter Roeck (1):
i2c: aspeed: Acknowledge most interrupts early in interrupt handler
Jae Hyun Yoo (1):
i2c: aspeed: Handle master/slave combined irq events properly
(From meta-aspeed rev: 9da1eb2ea0a22ff69f20e59060e8b078af8b9b2e)
Change-Id: Ib27364f289425c54972a347e2dbf838c2b9d9a78
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Whitespace fixes.
Replace the words Phosphor OpenBMC in the LICENSE file with the more
precise meta-aspeed.
(From meta-aspeed rev: f0bdc64dd7b0d22cd32a200b13c4ea0c704a2bb5)
Change-Id: Iecbbde0a280dc9d72e15aba4924cc4b5d44d321d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This is a feature used to attach BPF programs to network stockets. It is
used by systemd to restrict the IP addresses that processes can access
at a per-cgroup level. The upstream commit message calls this 'per-unit
IP access lists and accounting'.
It requires CONFIG_CGROUP_BPF and CONFIG_BPF_STREAM_PARSER. We did not
have CONFIG_CGROUP_BPF turned on, which caused the noisy messages.
Until OpenBMC adds configuration to take advantage of this feature,
disable CONFIG_BPF_STREAM_PARSER which allows systemd to correctly
detect that it cannot use BPF filters.
(From meta-aspeed rev: 53e41a55f5b3890fcec07c900a1894d57d6d499c)
Change-Id: I16a3c07025b7e954afa2dfdc7982fa70119c60dd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
(From meta-aspeed rev: 4ff170e93fb8247873463927001c48556ef5ddbb)
Change-Id: I34b847973978502bb9d049c06b60a27b6fa68fe8
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the tree to include the fixes from 4.18.6 and 4.18.7.
(From meta-aspeed rev: 153649112dffe643cdc669b019011ccc526cc526)
Change-Id: I452350f18757e4cd0b3869fd284aada3af6985ce
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Lei YU (1):
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
Samuel Mendoza-Jonas (1):
net/ncsi: Fixup .dumpit message flags and ID check in Netlink handler
(From meta-aspeed rev: 92702352bf8f2521fa05a8b4ea7af459920655db)
Change-Id: Ic5a4c19a689255c48eba83d1f67d15e4ddc868e1
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This rebases the OpenBMC kernel tree on a 4.18 base. There are 85
patches backported from 4.19-rc1, and the following 39 out of tree
patches:
Alexander Amelkin (1):
mtd: spi-nor: fix options for mx66l51235f
Andrew Jeffery (8):
ARM: dts: aspeed: witherspoon: Update max31785 node
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
soc: aspeed: Miscellaneous control interfaces
ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers
Benjamin Herrenschmidt (4):
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Add Power8 CFAM description for use by Palmetto
ARM: dts: aspeed: Add Power9 CFAM description
Brad Bishop (1):
ARM: configs: Remove atags from Aspeed G4 config
Christopher Bostic (1):
iio: dps310: Temperature measurement errata
Cyril Bur (1):
misc: Add ASPEED mbox driver
Cédric Le Goater (6):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
ARM: dts: aspeed: Add "spi-max-frequency" property
Edward A. James (2):
drivers/fsi: Add On-Chip Controller (OCC) driver
hwmon: Add On-Chip Controller (OCC) hwmon driver
Joel Stanley (15):
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed-palmetto: Add i2c OCC hwmon node
ARM: dts: aspeed-ast2500: Update flash layout
ARM: dts: aspeed: Add LPC mailbox node
ARM: dts: aspeed: Enable mbox
iio: Add driver for Infineon DPS310
ARM: dts: aspeed-g4: Expose SuperIO scratch registers
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed: Enable VHUB on Romulus
drm: Add ASPEED GFX driver
drm: aspeed: Debugfs interface for GFX registers
dt-bindings: gpu: Add ASPEED GFX bindings document
ARM: config: aspeed: Add out of tree drivers
ARM: dts: Add OCC description to Power9 dtsi
(From meta-aspeed rev: 2f1187b1bff8d52ddd93f2c5b598eec7ddc9f4f6)
Change-Id: I4035abcdcfa9a083599e27661fed5351fc6532fd
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This updates the kernel to the latest 4.17 stable release.
(From meta-aspeed rev: 76cf24ad58962b882bd28a6f8c55c30930c4db77)
Change-Id: Id1e482bbbba4b9cae6e882be99a47612862855ee
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The new subtree paradigm has moved the meta-bsp layers to the top level
Change-Id: Ic4f64c39465be699bed3649e125e027d17daf938
Signed-off-by: Dave Cobbley <david.j.cobbley@linux.intel.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|