summaryrefslogtreecommitdiff
path: root/meta-aspeed
AgeCommit message (Collapse)AuthorFilesLines
2020-11-17linux-aspeed: tacoma and rainier ramoops, ethanolx updatesJoel Stanley1-1/+1
Andrew Jeffery (6): ARM: dts: tacoma: Fix node vs reg mismatch for flash memory ARM: dts: tacoma: Zero-pad flash memory region length ARM: dts: rainier,tacoma: Fix size comment whitespace ARM: dts: rainier, tacoma: Comment reserved memory regions ARM: dts: rainier: Add reserved memory for ramoops ARM: dts: tacoma: Add reserved memory for ramoops Konstantin Aladyshev (3): ARM: dts: aspeed: amd-ethanolx: Enable KCS channel 3 ARM: dts: aspeed: amd-ethanolx: Enable devices for the iKVM functionality ARM: dts: aspeed: amd-ethanolx: Add GPIO line names (From meta-aspeed rev: 521b4bb4e011a86f27f1ef0f519cb3d161f8da35) Change-Id: I89a98cd464b4e4ae57bdad64126112a13f95723a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-12linux-aspeed: FSI SPI fixJoel Stanley1-1/+1
Eddie James (1): spi: fsi: Fix transfer returning without finalizing message (From meta-aspeed rev: 10fcd21efd04d5e109ef4354fe397ddc3bb3c9ea) Change-Id: I9685586b10029a6e7ae7d61b93170aeaa2aaa93b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-09u-boot-aspeed: u-boot on eMMC supportJoel Stanley1-1/+1
This adds a new configuration ast2600_openbmc_spl_emmc_defconfig that can be used on either emmc or nor systems. Note that it will try to locate the environment on emmc, so use on nor-only systems will always use the default environment. Machines that wish to use this configuration should set UBOOT_MACHINE in their <machinename>.conf. Eddie James (3): ARM: dts: Aspeed: Tacoma and Rainier: Add eMMC nodes and parameters arch: ARM: Aspeed: Add SPL eMMC partition boot support configs: Add AST2600 SPL eMMC configuration (From meta-aspeed rev: 1a970c012150cee8e5d937716f33e4f1c2e85e02) Change-Id: I53f6b39579529f7bb6d98f4ee9a3cb067dc75cb5 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-06meta-aspeed: update Yocto compat for gatesgarthPatrick Williams1-1/+1
The next release of Yocto is soon and most of the upstream layers have switched support strings for it. Support layer compat for gatesgarth (current) and dunsfell (previous). (From meta-aspeed rev: 3cc1749d59f84cb441fdcf5490cbbecac7227caf) Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I732a58adeef210b4975560c0d9607da79524dfa1 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-03linux-aspeed: ethernet, rainier dtsJoel Stanley1-1/+1
Eddie James (2): ARM: dts: aspeed: rainier: Add 4U device-tree ARM: dts: aspeed: rainier: Mark FSI SPI controllers as restricted Joel Stanley (1): net: ftgmac100: Ensure tx descriptor updates are visible (From meta-aspeed rev: 1e79f32e8571974816a086a330f270889ebe4d39) Change-Id: I1289cd2c5240a3cdb4eddb88b794a1efd886885b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-30linux-aspeed: Move to 5.8.17Joel Stanley1-2/+2
This includes security and bug fixes from the 5.8.15, 5.8.16 and 5.8.17 stable releases. (From meta-aspeed rev: 07d964972facc7d233f034f0bbdaea1c66e225b4) Change-Id: Ib6b7a9828e596f4f51f614b0db746a080d6ff5d5 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-30linux-aspeed: G220A fixesJoel Stanley1-1/+1
George Liu (1): ARM: dts: Fix label address for 64MiB OpenBMC flash layout John Wang (1): ARM: dts: aspeed: g220a: Add some gpios (From meta-aspeed rev: 95ee7821d9291e3696297990c330cce9a0e26966) Change-Id: Ice312e449e774c000e4bf572b0e99bfe77c14b92 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-14linux-aspeed: kprobes, ftgmac100Joel Stanley1-1/+1
Andrew Jeffery (1): ARM: kprobes: Avoid fortify_panic() when copying optprobe template Dylan Hung (1): net: ftgmac100: Fix Aspeed ast2600 TX hang issue (From meta-aspeed rev: 5d598c61c64dd7b70f50c87e53e274445f57481a) Change-Id: I3ca12a28d8b5178f64f7d5cc37e5c515d75921c1 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-09linux-aspeed: xdma, gfx sysfsJoel Stanley1-1/+1
Dan Carpenter (1): soc: aspeed: xdma: Return -EFAULT if copy_from_user() fails Joel Stanley (1): drm/aspeed: Add sysfs for output settings (From meta-aspeed rev: 772d6152ba68fecbe60f29d0555adc5f9e46d7cf) Change-Id: Ib38acc30a4d1dd6d98d1f1ae566d537c59d06c0b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-09linux-aspeed: Move to 5.8.14Joel Stanley1-2/+2
This includes security and bug fixes from the 5.8.13 and 5.8.14 stable releases. (From meta-aspeed rev: 9793d740db96120560c79d53907ff43afecca503) Change-Id: I8d3c6ca3084ae393ff775766b8be84c8ed722b2b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-09linux-aspeed: Bytedance G220A, EthanolX, Rainier, PECIJoel Stanley1-1/+1
Andrew Jeffery (2): ARM: config: Enable PSTORE in aspeed_g5_defconfig ARM: dts: aspeed: rainier: Don't shout addresses Eddie James (1): fsi: Aspeed: Add mutex to protect HW access John Wang (1): ARM: dts: Add 64MiB OpenBMC flash layout Konstantin Aladyshev (1): ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 binding Lotus Xu (1): ARM: dts: aspeed: Add Bytedance g220a BMC machine Zev Weiss (2): peci: fix error-handling in peci_dev_ioctl() peci-cputemp: label CPU cores from zero instead of one (From meta-aspeed rev: 282f8ce537d65b0e2fd00eca91e637518e97a64e) Change-Id: Ie63530abe3e2c26e58597e8c9e78fd01a3e8dd4f Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-10-09linux-aspeed: Move to 5.8.12 (take two)Joel Stanley1-2/+2
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and 5.8.12 stable releases. The previous commit did not bump to a version containing these fixes. (From meta-aspeed rev: 8d37078a9d3cfb22ada2ad4d052449fc8a2e4f0b) Change-Id: I3a210e76e52d350d3e45345ad0c3c383990961da Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-30linux-aspeed: Move to 5.8.12Joel Stanley1-1/+1
This includes security and bug fixes from the 5.8.9, 5.8.10, 5.8.11 and 5.8.12 stable releases. (From meta-aspeed rev: 20431851af835631f4cbe479d958f565ebef781b) Change-Id: Ib6965a9176d578cbc5eda2384928f17584c6cddc Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-26u-boot-aspeed: Disable NCSI debugJoel Stanley1-1/+1
Joel Stanley (1): net/ncsi: Disable DEBUG (From meta-aspeed rev: 59eb0deec79fa1939a450e74b416b75591b47788) Change-Id: Ib3f7695606a936b86a8ff885ab2a5c9598eae736 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-25u-boot-aspeed: Rebase on aspeed-master-v2019.04Joel Stanley1-1/+1
As ASPEED develop their ast2600 u-boot features, we've had a need to integrate changes from their tree into the openbmc tree. In the past we lined this up with a major version bump (as with the kernel), meaning we could create a new branch with our "out of tree" changes applied on top. However, in this case their SDK is still based on the 2019.04 release, so there's not a clear way forward. I've chosen to rebase the openbmc changes on top of their branch. The old branch is still accessible at archive/v2019.04-aspeed-openbmc-1. The bitbake recipe will continue to work as it uses the nobranch=1 flag, and specifies the version based on the SHA. The new branch contains their aspeed-master-v2019.04 tree as of today, with the OpenBMC changes applied on top. The ASPEED changes include: - support for the ast2400 - Disable of buggy AXI prefetch feature - SPL, OTP and secure boot fixes - SPI flash updates and calibration changes - eMMC, Ethernet, fixes I've boot tested it running from SPI NOR on AST2600 A1 hardware, as well as QEMU, and it reached userspace. I will bump the bitbake recipe to integrate the changes into openbmc. Andreas Dannenberg (1): spl: Make image loader infrastructure more universal Chia-Wei, Wang (18): config: ast2600: Enable board early initialization ARM: dts: ast2600: Revert dm-pre-reloc property from eMMC configs: ast2600-slt: Change DRAM speed to 1600Mbps spl: fit: Separate FIT image load and processing spl: ast2600: Fix the load buffer address Revert "spl: fit: Separate FIT image load and processing" Revert "add LPC/eSPI storngest Driving Strength" configs: ast2600-slt: Add ENV default configuration aspeed: Fix compile warning ast2600: Remove AXI-prefetch support wdt: ast2600: Fix reset mask setting spl: ast2600: Add secure boot flow support update bootflow fix boots address configs: ast2600-fpga: Fix defconfig and header ARM: spl: Add SPL relocation support spl: ast2600: Add relocation support ARM: timer: ast2600: Add dynamic frequency detection Chin-Ting Kuo (22): spi: timing: Change timing calibration method spi-flash: w25q01jv flash model support spi-flash: aspeed: Remove unused variable spi: Add w25q512jvfm flash model boot: emmc: Boot from eMMC feature early porting emmc: Move "u-boot,dm-pre-reloc" flag to evb.dts spi-nor: Add flash model w25q01jvfim and fix typo mmc: SD: Add property for timing phase and drive type mmc: slt: Add timing phase and drive type for MMC spi: cpuinfo: Add ABR, spi_aux_pin info spi: crypress: Set 4B mode to controller when address width is 4 spi: AST2500: Modify ABR boot source log spi: scu_info: Simplify scu info log related to fmc/spi spi: ast2500: Porting spi1 setting spi-flash: Set FMC04/SPIR04[6:4] when enter 4B mode spi-flash: Use user mode under specific condition spi-flash: Modify SPI/FMC CE1 default decode address fpga: fixbug: Remove CONFIG_BOARD_EARLY_INIT_F dp: Update dp base address spi: bugfix: Do not change read command until flash probe fmc: Set FMC50[1] for waiting WIP idle eMMC: Do not fill FMC50[1] when boot from eMMC Dylan Hung (18): add rmii rclk oe control add rmii rclk pin control add board_ram_info for ast2600 series move borad_add_ram_info to borad_common.c fix FPGA RGMII pin setting revise fpga mac device fix typo don't print message in sdramphy_init write scu config back if vga config is "0" refactor code: add macro for ECC setup trim tailing whitespaces don't re-init ecc if dram has been initialized fix ncsi build don't reserve VGA memory if efuse bit is set fix fpga booting add ast2650 fpga config remove dram initialization from platfrom.S remove mac init from platform.S Joel Stanley (7): dts: ast2600-evb: Enable FSI masters aspeed: Add machine names tools: Add script for generating recovery image configs: Add OpenBMC spl defconfig for AST2600 boards clk: ast2600: Add divisor settings for 100MHz PLL ram: ast2600: Enable device tree based DDR config ast2600: tacoma: Run DDR at 1333 Johnny Huang (37): otp: remove print process otp: ignore data region last 2 dw when program otp: program 2 dw then verify 2 dw when program data region otp: skip print data info when no key otp: set default value for otp strap programming rng: add aspeed rng cmd spl: fix duplicate define CONFIG_SYS_MONITOR_LEN defconfig: cot: reduce spl code size config: remove tftpput secure boot: fix hace reset and compile warning clk: rsa clock source set to hpll update otp patch code otp update otp: udpate program otp: udpate strap otp: update strap program bit otp: udpate strap read otp: reduce the code spl: ast2600: update secure boot flow defconfig: ast2600: update spl config spl: aspeed: fix ecc build secure: update bl2 verify secureboot: update bl3 verify aspeed: emmc: support emmc boot defconfig: support new boot flow defconfig: rename ast2600a1 as defaut config fix merge error defconfig: aspeed: update ecc config for new boot flow Revert "defconfig: aspeed: update ecc config for new boot flow" defconfig: aspeed: update ecc config for new boot flow otp: fix ast2600a1 info defconfig: enable position independent to support boot from uart config: enable CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK as default for ast2600 boot0: aspeed: add image size header for boot form sram cmd: otp: udpate for ast2600a2 update ast2600a2 otp register setup otp: fix compile warning and add strap info Peter Robinson (1): Remove redundant YYLOC global declaration ryan_chen (40): add link status update gpio driver fix i2c pinctrl update sd/emmc controller source update add ibm platform add kconfig for env add ast2600 openbmc defconfig fix env compile error update pcie driver mv to cmd/aspeed folder update for mv cmd/aspeed folder add pll test update full test update clk add display port driver add ast2600 defconfig update mac info update dp driver update hclk setting update axi ahb div cal update dp firmwire add more desciption about eMMC clk source update file mode update ast2400 have 32kbyte add ast2400 ompatible add ast2400 add reset for ast2400 add ast2400 include file add ast2400 board add ast2400 defconfig add ast2400 pinctrl update ast2400 reset add ast2400 clk add ast2400 defconfig update ast2500 add mac for ast2400 add for ast2400 add ast2400 clk Video format look-up table is updated for 640x480@85Hz (From meta-aspeed rev: 9d5ae052312dc45a645dc5e7ab8a9daf4ef686d6) Change-Id: I50a06ca91d86f4548d47e85e215ace4498c0c9a8 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-17linux-aspeed: Pinmux, Rainier eMMC pull downs, pmbus PEC debugfsJoel Stanley1-1/+1
Andrew Jeffery (5): hwmon: (pmbus) Expose PEC debugfs attribute pinctrl: aspeed: Format pinconf debug consistent with pinmux pinctrl: aspeed: Use the right pinconf mask pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banks ARM: dts: rainier: Disable internal pull-downs on eMMC pins (From meta-aspeed rev: c6a057b489fc7087f00abdbda682489e7a2e3318) Change-Id: Ie4d9c5d6519e340fcd7cbca9a32d733f934a271f Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-13aspeed: enable 'hw-rng' MACHINE_FEATUREPatrick Williams1-0/+1
Change Iee340ffd294c4f40ba3360acd3f750d886865608 introduced a machine feature which communicates to recipes if a hw random number generator is present. Since the Aspeed chips have a supported RNG, enable this MACHINE_FEATURE. (From meta-aspeed rev: 57caacd62ae6037119be32c608be6ae4e548e639) Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I275ca0fc1445c782ea6b10e3807e3b339fead53b Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-11linux-aspeed: Move to 5.8.8Joel Stanley1-2/+2
This includes security and bug fixes from the 5.8.6, 5.8.7 and 5.8.8 stable releases. (From meta-aspeed rev: 3bad2091835b6054b7ba1a2f016b9c125a1ce440) Change-Id: I4a1c370c1760ab0a273a88c836289b83e5ee44ca Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-11linux-aspeed: IBM op panel, I2C slave modeJoel Stanley3-1/+7
Enable I2C slave mode in ast2500 and ast2600 kernel config. Eddie James (5): dt-bindings: input: Add documentation for IBM Operation Panel input: misc: Add IBM Operation Panel driver i2c: aspeed: Mask IRQ status to relevant bits ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device (From meta-aspeed rev: 6204d930bc5b9df98192843227abac29946f75df) Change-Id: I2b66eb5192fabb8562af2327ef5afe3ef3fc33d9 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-01linux-aspeed: Move to 5.8.5Joel Stanley1-2/+2
This includes security and bug fixes from the 5.8.1, 5.8.2, 5.8.3, 5.8.4 and 5.8.5 stable releases. (From meta-aspeed rev: d70b397ee265c7cd3d6e4678b86009e9d7127446) Change-Id: Ieb305bf268a1044f1682992c3e1e0153aac08747 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-09-01linux-aspeed: Rainier XDMA and LEDsJoel Stanley1-1/+1
Eddie James (1): ARM: dts: Aspeed: Rainier: Enable XDMA engine Vishwanatha Subbanna (2): ARM: dts: aspeed: rainier: Add Operator Panel LEDs ARM: dts: aspeed: rainier: Add directly controlled LEDs (From meta-aspeed rev: f4c4262172c24e2727f51e6bc0518173fd45c0e4) Change-Id: Iacca07cde2dceff014997ebcab980b7e65bce60a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-08-14linux-aspeed: FSI SPI fixesJoel Stanley1-1/+1
Brad Bishop (4): spi: fsi: Handle 9 to 15 byte transfers lengths spi: fsi: Fix clock running too fast spi: fsi: Fix use of the bneq+ sequencer instruction eeprom: at25: Split reads into chunks and cap write size Eddie James (3): dt-bindings: fsi: fsi2spi: Document new restricted property spi: fsi: Implement restricted size for certain controllers spi: fsi: Check mux status before transfers (From meta-aspeed rev: f4b7c1c8227d54a4b805479132b32227113c77d7) Change-Id: I501829de26fba8d2bfd7440483015380192d2c50 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-08-14linux-aspeed: Move to Linux 5.8Joel Stanley3-5/+7
This updates the OpenBMC kernel tree to a 5.8 base. It has beent two weeks since the kernel was last updated, making it the quickest bump in OpenBMC history. There are 93 out of tree kernel patches carried in the OpenBMC tree. The defconfigs were updated to fix selection of video device. An upstream reorganisation of the V4L kconfig resulted in a large number of extra drivers enabled when all we required was VIDEO_ASPEED. Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Geissler (1): ARM: dts: tacoma: Add KCS node for LPC MCTP Andrew Jeffery (13): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers pinctrl: aspeed: Improve debug output soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned misc: Add ASPEED KCS driver for MCTP purposes ARM: dts: witherspoon: Add KCS node for LPC MCTP pinctrl: aspeed: Describe the heartbeat function on ball Y23 Ben Tyner (1): ARM: dts: aspeed: witherspoon-128: Remove checkstop GPIO from gpio-keys definitions Brad Bishop (4): ARM: dts: aspeed-g6: Expose SuperIO scratch registers soc: aspeed: lpc: Add G6 compatible strings ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string Cédric Le Goater (22): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600 mtd: spi-nor: aspeed: Disable zero size segments on the AST2600 spi-nor: aspeed-smc: Detect 4b opcodes differently /dev/mem: add a devmem kernel parameter to activate the device Eddie James (11): ARM: dts: rainier: Add KCS node for LPC MCTP ARM: dts: aspeed: Add witherspoon-128 machine dt-bindings: fsi: Add P10 OCC device documentation fsi: occ: Add support for P10 hwmon: (occ) Add new temperature sensor type i2c: fsi: Prevent adding adapters for ports without dts nodes dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl leds: pca955x: Add an IBM software implementation of the PCA9552 chip Fran Hsu (3): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Jae Hyun Yoo (12): clk: ast2600: enable BCLK for PCI/PCIe bus always dt-bindings: Add PECI subsystem document Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add bindings document of Aspeed PECI adapter ARM: dts: aspeed: Add PECI node peci: Add Aspeed PECI adapter driver dt-bindings: mfd: Add Intel PECI client bindings document mfd: intel-peci-client: Add Intel PECI client driver Documentation: hwmon: Add documents for PECI hwmon drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Joel Stanley (10): ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree ARM: dts: nuvoton: Update EVB for new PECI layout ARM: dts: nuvoton: evb: Rework enabling of nodes soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600 ARM: dts: aspeed: ast2600evb: Add MAC0 soc: aspeed-lpc-ctrl: Fix printf warning ARM: configs: aspeed: Update defconfigs ARM: config: aspeed-g5: Enable I2C GPIO mux driver ARM: config: aspeed: Fix selection of video device mtd: spi-nor: sfdp: Revert "default to addr_width of 3 for configurable widths" ARM: aspeed: g5: Do not set sirq polarity Tomer Maimon (11): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: configs: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine. dt-bindings: peci: add NPCM PECI documentation peci: npcm: add NPCM PECI driver (From meta-aspeed rev: 3c9616235643263beea47ef5db5cecafa3349c2e) Change-Id: I4616f47026e00e49bda0abb1fc586dd2faabee30 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
2020-08-07linux-aspeed: Enable XDMAJoel Stanley2-0/+2
Somehow this was not enabled. It is required for Witherspoon 128, Tacoma and Rainier. (From meta-aspeed rev: a7bbd475453768037877c820caed02f39055eb6e) Change-Id: Ie80479aa455c18c921387b23586cff3e7bc79204 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-08-07u-boot-aspeed: Fix DTC buildJoel Stanley1-1/+1
Zane reported that gcc 10 will fail to build the branch. This is the upstream fix. Peter Robinson (1): Remove redundant YYLOC global declaration (From meta-aspeed rev: 6630a1310fd9b17abdd8fca73f5c22fc346f9c8a) Change-Id: Ie72bb58c5c7684e42951e80ce6f80e98ef4f15fe Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-08-07linux-aspeed: Move to 5.7.12Joel Stanley1-2/+2
This includes security and bug fixes from the 5.7.11 and 5.7.12 stable releases. (From meta-aspeed rev: ea33f9ced2354a75d8918a3c7e61ca56f67e21df) Change-Id: Iaa9bd005a8897ab5e9a1148145c02d6fbb8603fa Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-08-04wic: Populate hostfw partitionAdriana Kobylak2-1/+2
Populate the hostfw partition by specifying the directory to be used as source for the filesystem. This directory is populated by a bbappend to the hostfw recipe. (From meta-aspeed rev: 37f30af4e377a6bc2d3c47ca435798969321f566) Change-Id: Id64e0ac6a5082be2b3ad689a6b323da8eb094e69 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28linux-aspeed: eMMC, FSI, Rainier and Tacoma device treeeJoel Stanley1-1/+1
Ben Tyner (1): Remove checkstop GPIO from gpio-keys definitions Eddie James (9): mmc: sdhci-of-aspeed: Fix clock divider calculation fsi: master: Add boolean parameter to link_enable function fsi: core: Disable link when slave init fails fsi: core: Set slave local bus ownership during init ARM: dts: aspeed: rainier: Switch OCCs to P10 ARM: dts: aspeed: rainier: Enable EHCI controller ARM: dts: Aspeed: tacoma: Enable EHCI controller fsi: master: Remove link enable read-back ARM: dts: aspeed: rainier: Add CFAM SPI controllers Joel Stanley (2): mmc: sdhci-of-aspeed: Revert "Prevent clock divider of zero" ARM: dts: aspeed: rainier: Add FSI I2C masters (From meta-aspeed rev: 4171a5eaa18f59cd4eef7d5dd1e7c8e548e2f78e) Change-Id: I9aaf5fd3cbf6ba1ab7acf6dbc66588b6367f1049 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28meta-aspeed: g6: defconfig: Enable I2C GPIO muxAndrew Jeffery1-0/+1
Some platforms make use of it. (From meta-aspeed rev: 132487e2ee60e4b167c07fb63093e0ac493a3fbb) Change-Id: I8752df5f9b4b195e605676a398cfdf1510b11008 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-28linux-aspeed: CFAM reset, I2C mux, SBE FIFOJoel Stanley1-1/+1
Andrew Jeffery (1): ARM: dts: rainier: Describe GPIO mux on I2C3 Joachim Fenkes (2): fsi/sbefifo: Clean up correct FIFO when receiving reset request from SBE fsi/sbefifo: Fix reset timeout Joel Stanley (4): ARM: config: aspeed-g5: Enable I2C GPIO mux driver fsi: aspeed: Support CFAM reset GPIO ARM: dts: aspeed: rainier: Add CFAM reset GPIO ARM: dts: aspeed: tacoma: Add CFAM reset GPIO (From meta-aspeed rev: ee96b77b00dbbc7cbf598dde0008c2ba96eb8d28) Change-Id: Ie73ef89d795e49a8f9bbef11261ae78d2b986e4a Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-24linux-aspeed: Move to 5.7.10Joel Stanley1-2/+2
This includes security and bug fixes from the 5.7.10 stable release. (From meta-aspeed rev: 69ec802b7b04b61203c81778f695a9dad7a2d0d4) Change-Id: I63b8b9773b0d49114e892bd0d57b95e6ad8cc516 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-23linux-aspeed: spi-nor fixesJoel Stanley1-1/+1
Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Joel Stanley (1): spi-nor: Remove unused file (From meta-aspeed rev: 7e2a5cd6ae49c669168c18e897d87e29a9b9244b) Change-Id: I7489f4a9bc3e8018830956a019b0ad24c1cc2a7f Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-22linux-aspeed: Move to Linux 5.7Joel Stanley5-22/+24
This updates the OpenBMC kernel tree to a 5.7 base. It has been three releases since the kernel was updated, making it over 9 months of development time. The stable releses up to v5.7.9 are integrated in this bump. There are 106 out of tree kernel patches carried in the OpenBMC tree. The defconfigs are regenerated with one change made to enable debugfs, as it will default to off with the new kernel without explicitly enabling it, and some platforms (eg Witherspoon) reply on it being enabled. Alexander Amelkin (1): mtd: spi-nor: fix options for mx66l51235f Andrew Geissler (1): ARM: dts: tacoma: Add KCS node for LPC MCTP Andrew Jeffery (14): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers soc: aspeed: Miscellaneous control interfaces ARM: dts: aspeed: witherspoon: Update max31785 node ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers pinctrl: aspeed: Improve debug output soc: aspeed: Fail probe of lpc-ctrl if reserved memory is not aligned misc: Add ASPEED KCS driver for MCTP purposes ARM: dts: witherspoon: Add KCS node for LPC MCTP pinctrl: aspeed: Describe the heartbeat function on ball Y23 ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP Ben Tyner (2): ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key Brad Bishop (4): ARM: dts: aspeed-g6: Expose SuperIO scratch registers soc: aspeed: lpc: Add G6 compatible strings ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string Cédric Le Goater (22): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training mtd: spi-nor: aspeed: fix training of multiple CS on the AST2600 mtd: spi-nor: aspeed: Disable zero size segments on the AST2600 spi-nor: aspeed-smc: Detect 4b opcodes differently /dev/mem: add a devmem kernel parameter to activate the device Eddie James (21): ARM: dts: rainier: Add KCS node for LPC MCTP ARM: dts: aspeed: Add witherspoon-128 machine fsi: aspeed: Enable 23-bit addressing clk: ast2600: Fix AHB clock divider for A1 dt-bindings: fsi: Add P10 OCC device documentation fsi: occ: Add support for P10 hwmon: (occ) Add new temperature sensor type i2c: fsi: Fix the port number field in status register i2c: fsi: Prevent adding adapters for ports without dts nodes ARM: dts: aspeed: rainier: Add second cfam on the hub dt-bindings: soc: Add Aspeed XDMA Engine soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl ARM: dts: aspeed: ast2600: Update XDMA engine node ARM: dts: aspeed: ast2500: Update XDMA engine node ARM: dts: aspeed: witherspoon: Enable XDMA engine ARM: dts: aspeed: tacoma: Enable XDMA engine clk: AST2600: Add mux for EMMC clock mmc: sdhci-of-aspeed: Prevent clock divider of zero leds: pca955x: Add an IBM software implementation of the PCA9552 chip Fran Hsu (3): ARM: dts: nuvoton: Add NPCM730 common device tree ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Quanta GSJ BMC George Hung (2): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver Jae Hyun Yoo (12): clk: ast2600: enable BCLK for PCI/PCIe bus always dt-bindings: Add PECI subsystem document Documentation: ioctl: Add ioctl numbers for PECI subsystem peci: Add support for PECI bus driver core dt-bindings: Add bindings document of Aspeed PECI adapter ARM: dts: aspeed: Add PECI node peci: Add Aspeed PECI adapter driver dt-bindings: mfd: Add Intel PECI client bindings document mfd: intel-peci-client: Add Intel PECI client driver Documentation: hwmon: Add documents for PECI hwmon drivers hwmon: Add PECI cputemp driver hwmon: Add PECI dimmtemp driver Joel Stanley (13): ARM: dts: aspeed-g4: Expose SuperIO scratch registers ARM: dts: nuvoton: Fix warnings in NPCM7xx common device tree ARM: dts: nuvoton: Update EVB for new PECI layout ARM: dts: nuvoton: evb: Rework enabling of nodes soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600 fsi: aspeed: Support cabled FSI fsi: aspeed: Run the bus at maximum speed fsi: aspeed: Add module param for bus divisor ARM: dts: aspeed: ast2600evb: Add MAC0 ARM: configs: aspeed: Update defconfigs hwmon (peci-dmmtemp): Fix 'sizeof' warning soc: aspeed-lpc-ctrl: Fix printf warning Revert "ARM: dts: aspeed: tacoma: Add gpio-key definitions" Tomer Maimon (11): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: configs: add defconfig for Nuvoton NPCM7xx BMC ARM: dts: npcm7xx: Update device tree arm: dts: Add NPCM7xx RunBMC Olympus Quanta machine. dt-bindings: peci: add NPCM PECI documentation peci: npcm: add NPCM PECI driver (From meta-aspeed rev: a1d8d7791b8257b85eb85d73f08c2961c8c94f16) Change-Id: I84ae1a28349144db398b7a43e0a2951c1eee434d Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-17u-boot-aspeed: Generate default env for eMMCAdriana Kobylak4-2/+28
Generate a default environment to boot an eMMC based on a txt file. Populate the generated environment image into the eMMC. (From meta-aspeed rev: fdc603c73b2dc8851ce2d1684e9c71a5ce51a5b8) Change-Id: I93944b183b7907202b02854e931593d62603ae77 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-17u-boot-aspeed: Add fw_env.config for eMMCAdriana Kobylak2-1/+9
Create a fw_env.config for eMMC with a redundant environment based on the mmc distro feature. The environment is located in the first eMMC partition in the User Data area. (From meta-aspeed rev: 3aa2db46e8097aa0a9627684686ca56b5d6b9872) Change-Id: I6e768e308f03513c6cf394a0adc7110d17322d49 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-07-15aspeed: Build a wic image for the eMMC User Data AreaAdriana Kobylak2-0/+35
The U-Boot SPL and U-Boot proper would be programmed to the Boot Area Hardware Partitions of the eMMC. The kernel and user space would go into the User Data Area. This commit creates an image that can be programmed into that User Data Area. Layout: --- - ----- -------- -------- ----- ------- ------ -------- ------- |GPT| | env | boot-a | boot-b | fs-a | fs-b | rwfs | hostfw |GPT-sec| --- - ----- -------- -------- ------ ------ ------ -------- ------- ^ 1MB 64MB 64MB 1GB 1GB 7GB 5GB | 0x5000 Primary GPT size (Beginning of image): 512B (Protective MBR) + 512B (Primary Header) + 16KB (Primary Table) First partition (u-boot-env) is 4K-aligned, which puts it at offset 0x5000 Secondary GPT size (End of image): 16KB (Secondary Table) + 512B (Secondary Header) Since the secondary GPT is expected to be at the end of the device, the initramfs can issue a "sgdisk -e /dev/mmcblk0" on first boot to move it to the end. The first partition holds the U-Boot environment. The following two partitions hold a filesystem with the fitImage file. Code update would reflash the full filesystem with the fitImage during an update. U-Boot can then be programmed to look for the kernel in partitions boot-a or boot-b. The remaining is a set of ext4 filesystems for user space, read-write, and host firmware. The size for the host firmware partition is configurable to be able to build an image of different size. The reason is that the tacoma system is has a User Data area just 1GB smaller than rainier. Design doc: https://gerrit.openbmc-project.xyz/c/openbmc/docs/+/28443 Tested: Adding "WKS_HOSTFW_SIZE = "4G"" to the tacoma.conf file created a 14GB wic file: $ ls -lh *wic -rw-r--r-- 1 anoo 532919 15G Jul 14 08:18 obmc-phosphor-image-rainier.wic -rw-r--r-- 1 anoo 532919 14G Jul 14 08:36 obmc-phosphor-image-witherspoon-tacoma.wi $ wic ls obmc-phosphor-image-rainier.wic Num Start End Size Fstype ... 7 9798963200 15167672319 5368709120 ext4 $ wic ls obmc-phosphor-image-witherspoon-tacoma.wic Num Start End Size Fstype ... 7 9798963200 14093930495 4294967296 ext4 (From meta-aspeed rev: b8a647297e3f9fe724f8ee1736bb9da3806d788e) Change-Id: I18b8a15ac8eddb6abfbc7b70429ef45ffc170d9a Signed-off-by: Adriana Kobylak <anoo@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: g6: Enable AT25 EEPROM driver configEddie James1-0/+1
Needed for SPI-attached eeproms. (From meta-aspeed rev: b64781c123543c5cbfecb81d974e82716545b099) Signed-off-by: Eddie James <eajames@linux.ibm.com> Change-Id: I5a931b742661d62790199afdd20dac5ef5935ad3 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: Move to 5.4.48Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.45, 5.4.46, 5.4.47 and 5.4.48 stable releases. (From meta-aspeed rev: c3bc610a79d6b35f6b3c1707c86ca89922a4fad5) Change-Id: I2839dcb68dbb1ed011adf236352add86e7e50d09 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-26linux-aspeed: Rainier and EVB device treesJoel Stanley1-1/+1
Eddie James (1): ARM: dts: aspeed: rainier: Add second cfam on the hub Joel Stanley (1): ARM: dts: aspeed: ast2600evb: Add MAC0 (From meta-aspeed rev: d13ebb3c7ca5dabd083bfa4d7dfa1897e9b77048) Change-Id: I9b4b1e70b67f6017f736cac85f010c8f3a4ba69e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-16u-boot-aspeed: DTC compilation hackJoel Stanley1-1/+1
Alejandro Enedino Hernandez Samaniego (1): libfdt: Make it compatible with newer dtc (From meta-aspeed rev: 724b95b0ed5b41f28b2f5926c209dace73a9b336) Change-Id: I9ca8614fe5127e6875386745780ca3c3c607d168 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-05linux-aspeed: Move to 5.4.44Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.44 stable release. (From meta-aspeed rev: ec813222ab8916603ce96d76f99c967d6d67110b) Change-Id: I911e44daeee1c8c507b744a002979cd82c5a114b Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-05linux-aspeed: DTS updates, XDMA, FSI I2CJoel Stanley1-1/+1
Ben Pai (1): ARM: dts: aspeed: mihawk: Add aliases for i2c and add thermal sensor Ben Tyner (2): ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key Eddie James (5): i2c: fsi: Fix the port number field in status register i2c: fsi: Prevent adding adapters for ports without dts nodes dt-bindings: soc: aspeed: xdma: Update to v11 upstream soc: aspeed: xdma: Update to v11 upstream ARM: dts: aspeed: Update XDMA to v11 upstream properties (From meta-aspeed rev: 6b226ab7f77c76db68e3d9e70b0f1a5c1dde514d) Change-Id: I272058c5e0dd5ca12b17379d1bf4f94f5a7ba290 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-06-02linux-aspeed: Move to 5.4.43Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.40, 5.4.41, 5.4.42, and 5.4.43 stable releases. (From meta-aspeed rev: e491b87b48ae956b3b40cc93a1a4102a0841f8b1) Change-Id: I23cc7318d2d28e6dff73ebf2fd4707702fe3c382 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-08linux-aspeed: Move to 5.4.39Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.39 stable release. It also includes a revert of the inital workaround for interrupt behaviour on AST2600's I2C master as 5.4.39 contains an upstream fix. Joel Stanley (1): i2c: aspeed: Revert initial IRQ workaround (From meta-aspeed rev: ac403399d5fbed4eba4a1587c9cfc2bb30cfd07a) Change-Id: I84376e84e55ce22498442f3d24877805ec22c8d6 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-08linux-aspeed: Rainier DTSJoel Stanley1-1/+1
Joel Stanley (1): ARM: dts: aspeed: rainier: System has one SPI NOR (From meta-aspeed rev: 963da65de5c17145cf34c5bc82376cf3a67f4ae0) Change-Id: I5e465b08a33cdecaf40cde0f024e88a7856b9728 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-06linux-aspeed: Move to 5.4.38Joel Stanley1-2/+2
This includes security and bug fixes from the 5.4.33, 5.4.34, 5.4.35, 5.4.36, 5.4.37 and 5.4.38 stable releases. (From meta-aspeed rev: 60604033e4584eee4958a8b025a4b51e13a99638) Change-Id: I64558ff2aca67b1b9c75df026a496fb5a7308d67 Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-06linux-aspeed: Rainier DTS, 2600 Pinctrl, OCCJoel Stanley1-1/+1
Andrew Jeffery (2): pinctrl: aspeed: Describe the heartbeat function on ball Y23 ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP Eddie James (3): dt-bindings: fsi: Add P10 OCC device documentation fsi: occ: Add support for P10 hwmon: (occ) Add new temperature sensor type (From meta-aspeed rev: 8b46bfecbdc8b22b1cb4b9441666b1345fc8dadf) Change-Id: I86124c57eb821cc2bf268c110802946bac5d043e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-05dunfell: utilize u-boot-aspeed.inc in sdkAndrew Geissler1-1/+1
The u-boot.inc from upstream has been moved into this repository as its upstream version is no longer compatible with openbmc/u-boot. See commit 9052e5b for more details. Some notes on attempting to get upstream to work. Got to issue 3 and decided that instead of trying to cherry-pick in specific fixes from upstream, we're going to need a full rebase. Until this is possible, I think our best option is to just use the .inc from the working version of poky which is what u-boot-aspeed.inc is. 1) Build directory (B) def moved to common .inc Define BUILD directory in u-boot-common-aspeed-sdk_2019.04.inc recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc +B = "${WORKDIR}/build" 2) Support in Makefile for new u-boot-initial-env file Pull in the following commit: https://github.com/u-boot/u-boot/commit/bdaa73a5b3923257add182b4ab8058dbfa33421b Available in my fork: https://github.com/geissonator/u-boot/tree/v2019.04-aspeed-openbmc-u-boot-initial-env-fix 3) CONFIG_DEFAULT_DEVICE_TREE needed | arm-openbmc-linux-gnueabi-objcopy --gap-fill=0xff -j .text -j .secure_text -j .secure_data -j .rodata -j .hash -j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn -j .binman_sym_table -j .text_rest -j .dtb.init.rodata -j .efi_runtime -j .efi_runtime_rel -O binary u-boot u-boot-nodtb.bin | make -f /home/andrewg/Code/openbmc/build/tmp/work/witherspoon_tacoma-openbmc-linux-gnueabi/u-boot-aspeed-sdk/1_v2019.04+gitAUTOINC+58583dd97d-r0/git/scripts/Makefile.build obj=arch/arm/dts dtbs | test -e arch/arm/dts/unset.dtb || ( \ | echo >&2; \ | echo >&2 "Device Tree Source is not correctly specified."; \ | echo >&2 "Please define 'CONFIG_DEFAULT_DEVICE_TREE'"; \ | echo >&2 "or build with 'DEVICE_TREE=<device_tree>' argument"; \ | echo >&2; \ (From meta-aspeed rev: cd159fccefe991336e798da35ed5a2b0abf27e62) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I1d28bd1125fe5acb1e644a751e44c65772892d0c Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-05-01linux-aspeed: perf build fix, FSI attached SPIJoel Stanley2-1/+3
Changbin Du (1): perf: Make perf able to build with latest libbfd Eddie James (2): dt-bindings: fsi: Add FSI2SPI bindings spi: Add FSI-attached SPI controller driver Joel Stanley (1): ARM: confisgs: aspeed_g5: Sync with OpenBMC (From meta-aspeed rev: 29b354d091e668d00598d0ef05f070f73c91c0df) Change-Id: I6fe69e32f460d0aeb41fe14b4e87ef95f6cb436e Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-04-30dunfell: python3 support in u-bootAndrew Geissler1-3/+3
(From meta-aspeed rev: 31cde1a9933517f545e23e6a539349eaa92e903f) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Ic1e0aa287e911953764b4356ebfed0d400b987b9 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-06-28 08:14:20 +0300