Age | Commit message (Collapse) | Author | Files | Lines |
|
Tested: Test on qemu ipmi chassis status cmd work correct
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I60d20bf58c21b5c81d5fbad7649c1e2b43351392
|
|
With the upstream aspeed-uart-routing changes, the user space interface needs
to be updated to use the new path.
Tested: Verify the SOL is working fine on g220a.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I4313d240b2778ef8070214eb19029b559588bcea
|
|
The node manager is maintained in
https://github.com/Intel-BMC/node-manager and it is not buildable with
latest OpenBMC.
The OpenBMC guideline[1] and the repotest[2] does not accept pathces in
machine layers, so the patches to node-manager are not accepted.
Remove the recipe for now, otherwise the build fails.
[1]:
https://github.com/openbmc/docs/blob/master/meta-layer-guidelines.md
[2]:
https://github.com/openbmc/openbmc-build-scripts/blob/master/build-setup.sh#L141
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I735f5b4d9b1cfa0ff4c0e47d349f99e847c0a7bd
|
|
Fix the environment variables of the destination directory
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: Iffd1ca218da9d9aeaff560ecf96c8b8267702994
|
|
Config additional device Support and manufacturer ID
Tested: ipmitool mc info and ipmitool fru
Signed-off-by: Henry Tian <tianxiaofeng@bytedance.com>
Change-Id: I08488b2c9f19e086eee8082242a9efdb96957e61
|
|
It adjusts some sensors' number and adds the total power sensor.
Tested: Verify the "Total_Power" is shwon in ipmi sensor list.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I334fe602f949bbd95cb59bcdfba390ea5147df33
|
|
Add virtual sensor's associations so that the sensors could be shown in
Redfish and WebUI.
Tested: Verify the Total_Power is shown in Redfish as below
$ curl -k -H "X-Auth-Token: $token" https://${bmc}/redfish/v1/Chassis/G220A/Sensors/Total_Power
{
"@odata.id": "/redfish/v1/Chassis/G220A/Sensors/Total_Power",
"@odata.type": "#Sensor.v1_0_0.Sensor",
"Id": "Total_Power",
"Name": "Total Power",
"Reading": 514.0,
"ReadingRangeMax": null,
"ReadingRangeMin": null,
"ReadingType": "Power",
"ReadingUnits": "W",
"Status": {
"Health": "OK",
"State": "Enabled"
}
}
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I0c9c84917364cad701f00fc3041d427a6e8750bc
|
|
Add below virtual sensors based on VR sensors:
P0_DIMM_VR_Pwr = CPU0_DIMM_VR_0_Input_Power + CPU0_DIMM_VR_1_Input_Power
P1_DIMM_VR_Pwr = CPU1_DIMM_VR_0_Output_Voltage + CPU1_DIMM_VR_1_Output_Voltage
CPU0_VR_Pwr = CPU0_VR_0_Input_Power + CPU0_VR_1_Input_Power + CPU0_VR_2_Input_Power
CPU1_VR_Pwr = CPU1_VR_0_Input_Power + CPU1_VR_1_Input_Power + CPU1_VR_2_Input_Power
CPU0_VR_Temp = max(CPU0_VR_0_Temperature, CPU0_VR_1_Temperature, CPU0_VR_2_Temperature)
CPU1_VR_Temp = max(CPU1_VR_0_Temperature , CPU1_VR_1_Temperature, CPU1_VR_2_Temperature)
P0_DIMM_VR_Temp = max(CPU0_DIMM_VR_0_Temperature, CPU0_DIMM_VR_1_Temperature)
P1_DIMM_VR_Temp = max(CPU1_DIMM_VR_0_Temperature, CPU1_DIMM_VR_1_Temperature)
Tested: Verify the above sensors appear on DBus and the values are
expected.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I9412e7da1a147b64cb43a5f9981042623cfb6423
|
|
Add phosphor-virtual-sensor pakcage and configure it to enable
"total_power" sensor that is the sum of PSU0/1's input power.
Tested: Verify the Total_Power sensor is on DBus and the value is the
sum or PSU0 and PSU1's input power.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: Ie8f61800299bef01a8bb74256c24d1f0a90df258
|
|
Use nonarch_base_libdir instead of base_libdir, because the files are
always in /lib/udev/rules.d/. On ppc64le base_libdir is lib64, and the
files end up in the wrong spot.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Change-Id: I3c24dae293f4166f1ed1826d09d4bde7cd7d0357
|
|
convert-overrides.py meta-bytedance
git grep -l _g220a -- meta-bytedance | grep ".bb" | \
xargs sed -i 's/_g220a/:g220a/'
git grep -l _u-boot -- meta-bytedance | xargs sed -i \
's/_u-boot/:u-boot/'
Tested:
$ git grep "_[a-z0-9_/-]*[ :]" -- meta-bytedance | grep ".bb"
meta-bytedance/meta-g220a/recipes-phosphor/chassis/x86-power-control_%.bbappend:do_install:append() {
meta-bytedance/meta-g220a/recipes-phosphor/configuration/entity-manager_%.bbappend:do_install:append() {
meta-bytedance/meta-g220a/recipes-phosphor/console/obmc-console_%.bbappend:do_install:append() {
meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-ipmb_%.bbappend:do_install:append(){
meta-bytedance/meta-g220a/recipes-phosphor/ipmi/phosphor-ipmi-kcs_%.bbappend:do_install:append() {
meta-bytedance/recipes-core/systemd/systemd-conf_%.bbappend:do_install:append() {
meta-bytedance/recipes-core/systemd/systemd_%.bbappend:do_install:append () {
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I26fb4c52012ee407ceb26c5a4120bf7b0b7a165a
|
|
Tested: Run ipmitool sensor list and verify the output is as
expected.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: Ibd81144adf8cb1477a8963cc3b8331b72c1a928b
|
|
ipmb may not be ready for communication when me-time-sync start.
Add some retry so that the time could be synced.
Tested: Test 10 times, me-time-sync can work well
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I93343d2ac17fc13b1d094bf05f424d9cb54cfa3f
|
|
The Total_Power sensor is not available on g220a system, add patch to
remove it.
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: Ibc70bec3d56b13740d3f17a666a8d0b0fa7c8429
|
|
Tested: Verify the CPU_Power and Memory_Power sensors are OK.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I13fde13adc4062d5586167e411c129a986e3ad76
|
|
Add the power related config to enable power on.
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I3912fc603cf249bb2a1f48f69b7e14d458a6e0f1
|
|
Tested:now we can see ipmi-kcs4 and eth1
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I85166e66c0b37a7b5b3f5b8387b6056afc66e1cd
|
|
Although hostlogger does not read the serial port, its systemd unit
depends on the obmc-console and waits for the obmc-console of the
specified serial port instance, which is vuart by default, ttyS2
on the g220a
Tested: journalctl |grep VUART, no realted log
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I4136e6f376e71d3590ab2a787784446bcc7647df
|
|
This patch is for phosphor-ipmi-host
(From meta-bytedance rev: 588f458cf553f84e1cc2cc9e7dca07ed6ebd3d86)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I41a0c113ec6853f8a49ac1664c66595419b570e8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
read a byte at one time eg:
for the first byte
i2cset -y 1 0x50 0x00 0x00
i2cget -y 1 0x50
(From meta-bytedance rev: 6389a4f03a518e49241d13843cf005f4a85d7cc8)
Tested: Verify the eeprom mac addr can be read
use `fw_printenv`,`ip a` can read device
mac addr
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I5fbf28e5bb3bb2ccc2a074388f4166e35da48afc
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Do not enter the failmode if a temperature sensor's value is
NAN, It's useful for debug. We always want the pid-controler to
run, when debugging.
(From meta-bytedance rev: ae79ff9e289c85498e656172e99d44b11d969109)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I957528b2e2f336bdf3abbd78ec105bdc249e3716
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: Login in the webui, it works.
(From meta-bytedance rev: 69a07b424834dc1f78046177c1314988812e27e9)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I2c89ce0cddfb0f68b788b855b67cbc56e321c3f4
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: Run ipmitool fru print 0 and ipmitool sensor list,
the output is as expected.
(From meta-bytedance rev: 9e8a65aa85782b09f21fda3df0f502f6037e0f02)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I0ab25c386a418d039f05a4c4e96553152322194f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
g220a BMC needs to get time from ME on start.
Add me-time-sync package that fetches time from ME via ipmb, and set the
time to BMC via `date` command.
Tested: Verify the time is set on BMC boots
(From meta-bytedance rev: c8640d007d25676261acc04317e5612269bd3ed5)
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I0e7f1d249cf743e3477843a67a6d2e6250c43aa6
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested : we can see /dev/ipmb-4 on g220a
Use `busctl call xyz.openbmc_project.Ipmi.Channel.Ipmb \
"/xyz/openbmc_project/Ipmi/Channel/Ipmb" org.openbmc.Ipmb \
sendRequest yyyyay 0x01 0x0a 0x00 0x48 0`
to get ME time correctly
(From meta-bytedance rev: 58c6841aee1bd93c1070401ce7ca589367b8e6d0)
Signed-off-by: Lotus Xu <xuxiaohan@bytrdance.com>
Change-Id: Ic45173405ec9cd1806b5caa7a5081b6ed0d8fc3e
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: ssh -p 2200, SOL works well.
(From meta-bytedance rev: 1f40f6da4fc2e00fc06128ae6ba7dd1f045c8a84)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I2abd1e11c5158da887ac382bb2a98f94d85a4749
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-bytedance rev: aec4880792267c1d8a00ba8a77b3fd23640691f3)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I729b66aa82c4bde434879e9ef696c03d4015c624
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|