Age | Commit message (Collapse) | Author | Files | Lines |
|
Add the power related config to enable power on.
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I3912fc603cf249bb2a1f48f69b7e14d458a6e0f1
|
|
Tested:now we can see ipmi-kcs4 and eth1
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I85166e66c0b37a7b5b3f5b8387b6056afc66e1cd
|
|
Although hostlogger does not read the serial port, its systemd unit
depends on the obmc-console and waits for the obmc-console of the
specified serial port instance, which is vuart by default, ttyS2
on the g220a
Tested: journalctl |grep VUART, no realted log
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I4136e6f376e71d3590ab2a787784446bcc7647df
|
|
This patch is for phosphor-ipmi-host
(From meta-bytedance rev: 588f458cf553f84e1cc2cc9e7dca07ed6ebd3d86)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I41a0c113ec6853f8a49ac1664c66595419b570e8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
read a byte at one time eg:
for the first byte
i2cset -y 1 0x50 0x00 0x00
i2cget -y 1 0x50
(From meta-bytedance rev: 6389a4f03a518e49241d13843cf005f4a85d7cc8)
Tested: Verify the eeprom mac addr can be read
use `fw_printenv`,`ip a` can read device
mac addr
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Change-Id: I5fbf28e5bb3bb2ccc2a074388f4166e35da48afc
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Do not enter the failmode if a temperature sensor's value is
NAN, It's useful for debug. We always want the pid-controler to
run, when debugging.
(From meta-bytedance rev: ae79ff9e289c85498e656172e99d44b11d969109)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I957528b2e2f336bdf3abbd78ec105bdc249e3716
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: Login in the webui, it works.
(From meta-bytedance rev: 69a07b424834dc1f78046177c1314988812e27e9)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I2c89ce0cddfb0f68b788b855b67cbc56e321c3f4
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: Run ipmitool fru print 0 and ipmitool sensor list,
the output is as expected.
(From meta-bytedance rev: 9e8a65aa85782b09f21fda3df0f502f6037e0f02)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I0ab25c386a418d039f05a4c4e96553152322194f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
g220a BMC needs to get time from ME on start.
Add me-time-sync package that fetches time from ME via ipmb, and set the
time to BMC via `date` command.
Tested: Verify the time is set on BMC boots
(From meta-bytedance rev: c8640d007d25676261acc04317e5612269bd3ed5)
Signed-off-by: Lei YU <yulei.sh@bytedance.com>
Change-Id: I0e7f1d249cf743e3477843a67a6d2e6250c43aa6
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested : we can see /dev/ipmb-4 on g220a
Use `busctl call xyz.openbmc_project.Ipmi.Channel.Ipmb \
"/xyz/openbmc_project/Ipmi/Channel/Ipmb" org.openbmc.Ipmb \
sendRequest yyyyay 0x01 0x0a 0x00 0x48 0`
to get ME time correctly
(From meta-bytedance rev: 58c6841aee1bd93c1070401ce7ca589367b8e6d0)
Signed-off-by: Lotus Xu <xuxiaohan@bytrdance.com>
Change-Id: Ic45173405ec9cd1806b5caa7a5081b6ed0d8fc3e
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Tested: ssh -p 2200, SOL works well.
(From meta-bytedance rev: 1f40f6da4fc2e00fc06128ae6ba7dd1f045c8a84)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I2abd1e11c5158da887ac382bb2a98f94d85a4749
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-bytedance rev: aec4880792267c1d8a00ba8a77b3fd23640691f3)
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Change-Id: I729b66aa82c4bde434879e9ef696c03d4015c624
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|