Age | Commit message (Collapse) | Author | Files | Lines |
|
For shutdown, if it does not go through the power utility, the
Chassis state will not change.
For host reset, execute additional verification steps attached
to the power utility service performing the host reboot.
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I2f67a34ba8cfd80fd3dde999baa329d44288bdfe
|
|
Kudo uses GPIO for checking the host status and does not use IPMI
SMS. Therefore, this will remove the host-check feature as some of
the recent recipe changes create stalls between host-state-manager
and IPMI host control. Reference changes made in,
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-state-manager/+/45312
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I76b246dd003f94c95f194592647c4291014abf0b
|
|
Instead of a host or chassis restart for a Chassis PowerCycle,
have both the BMC and host perform a hard reset. This requires
changes to phosphor-state-manager to add the handling of
xyz.openbmc_project.State.Chassis.Transition.PowerCycle. Currently,
there is handling for On and Off, but not PowerCycle.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I3d934c47a68899b2fd8fcba966f8d92c97554a77
|
|
Summary of changes:
1. Adjust start time of xyz.openbmc_project.State.Chassis.service
to fix initial chassis state
2. Add shutdown ack service
3. Remove reset ack service
4. Remove heartbeat mode
5. Remove sysreset pin control from power_control.exe
6. Remove all phosphor-fan services that caused power off during
a system reset
7. Adjustments to ampere_power_util.sh (See below)
ampere_power_util.sh:
1. Use GPIO instead of dbus for host state
2. Wait 3 seconds before checking power status for power on
3. Wait 6 seconds before checking power status for power off
4. Have force_off act GPIO while power_off sets Chassis state
5. Graceful shutdown acts GPIO
6. Check host status before issuing system reset
7. Set Watchdog Expire Action to None before power off and reset
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: Ie2720ee60d489c4160165c6827a78a400ae4d30b
|
|
This will select the option within phosphor-sel-logger to clear the
IPMI SEL through its Clear method. Then there will not be a Record
ID sync issue from the clear of SEL and adding new entries.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I4ba21237b2726254b2a427d9bc26469c5267b565
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
Enable support for smbios-mdr using IPMI BLOB transport protocol,
and disable the cpuinfo feature.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I035889f3ce0792a06c85a8ea713a19e24c24e546
|
|
Enable redfish response to contain EthernetInterface SpeedMbps
/redfish/v1/Managers/bmc/EthernetInterfaces/eth[x]
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I0d4179935b37c8d7bd5d0c51b122851d4f81a99d
|
|
Add I2C bus 12 to blacklist file in the EM configuration
12 is slave and Fru device should not be scanning it.
Signed-off-by: Mustafa Shehabi <mustafa.shehabi@fii-na.com>
Change-Id: I51c66f7b322113d2b4120a266b053ea3e92cc0fa
|
|
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I83358748c2a8102c018d3e6ffb7f1fabad459c00
|
|
Fix virtual sensor config so that sensors will show NA in the SDR when
missing its input sensors.
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I9bba40046c58455e4ba4d8dcd963871023f6920c
|
|
Changing the syntax for various yocto files ie. (_ to :) changes to
bb, bbappend and conf files.
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: If25577ee9d98398c1a1ab7f85a0373c46af70245
|
|
add BMC version in distro/openbmc-kudo.conf
add Gbmc.conf
add dev_id.json
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I84c6d735cfad55abaa272edab1d10b4b9d4b0d99
|
|
Enable the Redfish logs and SEL threshold, pulse, and watchdog
event monitoring.
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I8b72923693a8a3a426f2b87185a89aa1add8781c
|
|
The Entity Manager JSON file is being checked into entity-manager
configurations, so it can be removed from meta directory.
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: Ibea2fc4f79012a4c3b27d3e86409856e699b6bd7
|
|
Added
1. phosphor-state-manager
2. ampere-hostctrl
3. Nuvoton chip and skeleton GPIO support in obmc-libobmc-intf
5. obmcutil support
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I2628a0cab35a9be5afd702cc6269932c0c901e6a
|
|
This makes it possible for us to change out build specific settings.
Change-Id: I86e0dd6b02373f6c6a0e1766e14510c468f9c06e
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
1. Add kudo watchdog service
2. Add kudo specific watchdog action services
3. Fix watchdog action.services to not autostart
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I49e672c93001a5ba7b8960b914222ff7abc37c9f
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
enabled the ipmi chassis capabilities command
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I0dd4a6eb90a070987a371649385f6d8f037d4e67
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
Increase the /var/log/obmc-console*.log file to 1M
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I07cecebb6fe9c1d8e2d123951c67b3d33ce0da3b
|
|
1. remove the usb-network from obmc-phosphor-image.bbappend
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Iaccd431f0b712b201b213f9af44fd446a1c54b1f
|
|
1. correct the sensor name in EM json file
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I98df21ba91820fefccf86640433ca8786a81dcf5
|
|
add virtual sensors for DIMMG and CPU power
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Id7c8269899caddcb68f11c75e867fa173b0b8ee4
|
|
change blobs binarystore i2c address
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I479810d5f086a57c593a45d36ca8e26c33044414
|
|
1. Fix sensors in kudo.json
a. Update FAN threshold
b. Change NBM name
c. Change NBM zone name
d. Add DIMMG as virtual sensors
e. Update DIMMG threshold
f. Update NBM threshold
2. Add black list to fix pmbus scan issue
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: Id2b781bcc5d2740cec3895ce3096ed793990707b
|
|
1. Add bbappend to phosphor-ipmi-host to include a needed header file
2. Add missing packages to obmc-phopsphor-image
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: XP Chen <xiao-peng.Chen@fii-na.com>
Change-Id: Ib28a1232e0a84a1efa80b4b819cf7f9d3cb68955
|
|
1- Using Virtual sensor
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: Id942cb0a1fb1032589476bc202148f47d1953c6e
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. support the Ampere host and SCP
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Ifb07bac01264c8d04741e6996f421ab457291d39
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. add the hotswap-power-cycle
2. add the entity-association-map
3. add the phosphor-ipmi-blobs-binarystore
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Ieea8f21a35c81ed066eedab0c8264494b743f3bb
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1- Add space to fix build issue
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: Ic08c2e94e2271c8ab67f6ef60b0886379a70354b
|
|
1- Using Entity manager
2- Using Entity manger PID
3- Using EntityIds
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: Icfaae4556e03b99e7b44baa15f22d6a453d9bf54
Signed-off-by: mohaimen.alsamarai@fii-na.com <mohaimen.alsamarai@fii-na.com>
|
|
1- Using PID Fan Control
2- Switch Fan Control from Phosphor PID Control
to Entity Manager PID
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: I29305ba959dd2f4dd2fd0131af324f105d28a7bc
|
|
1- Using SEL log
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: I65a6c0094262e598bbb1c8240b11c76c9fbe51eb
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. add kudo-bios-update package to support bios update
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Ic245828ed3bb0ddf6d7363e7c2c4d3b8b538aa88
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Signed-off-by: Mohaimen Alsamarai <Mohaimen.alsamarai@fii-na.com>
|
|
1. add USB-NIC functions
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I1eba438c770c8ccd5794b1184d4a25ef7fbfb0e6
|
|
1. Use Nuvoton cpld function to support update
MB CPLD and BMC CPLD
2. include phosphor ipmi flash
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I0eb852a20c35670c6a62c9858182320ed0c925a6
|
|
First drop for the meta-kudo layer, initial machine configuration
to supports Nuvoton npcm730 chip and the Ampere ARM system
Tested-by:
1. Load image on the Nuvoton RunBMC CRB
2. Use ipmitool to test the command under BMC console
a. ipmitool mc info
b. ipmitool sdr
c. ipmitool lan print
d. ipmitool channel info 1
e. ipmitool user list 1
f. ipmitool chassis status
g. ipmitool raw 0x06 0x01
h. ipmitool power status
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Ic34b77affe0c08e84762ef795f9f06011bd269ce
|