Age | Commit message (Collapse) | Author | Files | Lines |
|
This will select the option within phosphor-sel-logger to clear the
IPMI SEL through its Clear method. Then there will not be a Record
ID sync issue from the clear of SEL and adding new entries.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I4ba21237b2726254b2a427d9bc26469c5267b565
|
|
Upstream bbclasses changed to typically use the `:${PN}` override
syntax, including the SYSTEMD_ variables. Change our systemd.bbclass
to do the same for consistency and perform a tree-wide variable
replacement.
Spot checked by building bletchley and witherspoon and checking
some of the SYSTEMD_LINK directives on installed packages under qemu.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I20a9dd809bff8af8759488734f80486c7228c6eb
|
|
The SEL Record IDs are observed to skip in /var/log/ipmi_sel and
the issue has been traced to the rate-limit of rsyslog. When
messages are dropped due to rate-limiting, some of them are SEL
messages. Phosphor-sel-logger is inserting the Record ID into the
message without checking if previous records make it into ipmi_sel.
This causes the skip in Record IDs.
To prevent SEL messages from being dropped, the rate-limit has been
increased. The side-effect is that more messages are being allowed
within a minute to lower performance.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: Iff015e1f45e7f79f73d1a03d05af88832b6f972d
|
|
Enable support for smbios-mdr using IPMI BLOB transport protocol,
and disable the cpuinfo feature.
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I035889f3ce0792a06c85a8ea713a19e24c24e546
|
|
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I276c7333f9f01949db2387735edb5d9a97c4fa1d
|
|
1. Update both primary and backup SCP EEPROMS when updating the BIOS
Modify the
2. Switch the SCP mux correctly on EVT and DVT hw
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Idd07f4b57bfd2eaa13795f60b653915f1cf7c161
|
|
Add PREFERRED_PROVIDER_virtual/bmc-update in kudo.conf to fix
bmc_update build conflict with gbmc's bmc_update.
Signed-off-by: Mustafa Shehabi <mustafa.shehabi@fii-na.com>
Change-Id: Ideb5cbde0f4c94c7197984c1641223da1583111d
|
|
Enable redfish response to contain EthernetInterface SpeedMbps
/redfish/v1/Managers/bmc/EthernetInterfaces/eth[x]
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I0d4179935b37c8d7bd5d0c51b122851d4f81a99d
|
|
Add I2C bus 12 to blacklist file in the EM configuration
12 is slave and Fru device should not be scanning it.
Signed-off-by: Mustafa Shehabi <mustafa.shehabi@fii-na.com>
Change-Id: I51c66f7b322113d2b4120a266b053ea3e92cc0fa
|
|
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I83358748c2a8102c018d3e6ffb7f1fabad459c00
|
|
Fix virtual sensor config so that sensors will show NA in the SDR when
missing its input sensors.
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I9bba40046c58455e4ba4d8dcd963871023f6920c
|
|
Adding chassis management packages
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I334f925414815961fd9e6dcb309a52c14d670f03
|
|
Changing the syntax for various yocto files ie. (_ to :) changes to
bb, bbappend and conf files.
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: If25577ee9d98398c1a1ab7f85a0373c46af70245
|
|
add BMC version in distro/openbmc-kudo.conf
add Gbmc.conf
add dev_id.json
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I84c6d735cfad55abaa272edab1d10b4b9d4b0d99
|
|
update the kernel configure file for 5.10 kernel
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I423ed5a6fa78c43d356d3098e3eb518da1f7476f
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
Enable the Redfish logs and SEL threshold, pulse, and watchdog
event monitoring.
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: I8b72923693a8a3a426f2b87185a89aa1add8781c
|
|
The Entity Manager JSON file is being checked into entity-manager
configurations, so it can be removed from meta directory.
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Charles Boyer <Charles.Boyer@fii-usa.com>
Change-Id: Ibea2fc4f79012a4c3b27d3e86409856e699b6bd7
|
|
Added
1. phosphor-state-manager
2. ampere-hostctrl
3. Nuvoton chip and skeleton GPIO support in obmc-libobmc-intf
5. obmcutil support
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I2628a0cab35a9be5afd702cc6269932c0c901e6a
|
|
1. Update to support DVT board
2. Support command for console redirection
3. Disable 2nd CPU clock when only 1 CPU is installed
4. Set HPM_STBY_RST_N to High to match dcscm spec
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I300b272587ddc2c7d82aa76196e5db100d02aae2
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
This makes it possible for us to change out build specific settings.
Change-Id: I86e0dd6b02373f6c6a0e1766e14510c468f9c06e
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
Fix reading of CPLD versions
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I0557905dfa08080da19a0ff836a9014d6e54a9ac
Signed-off-by: Xiaopeng Chen <xiao-peng.chen@fii-na.com>
|
|
Modify kudo-fw.sh for better flash failure detection
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Id9418a8fc162e1fa1dc8f8eb0714337785526972
|
|
1. Add kudo watchdog service
2. Add kudo specific watchdog action services
3. Fix watchdog action.services to not autostart
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I49e672c93001a5ba7b8960b914222ff7abc37c9f
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
add unbind adm1266 driver to support the flash
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I4221e646279b41b84c1d2be89ad3fb0df2220407
|
|
enabled the ipmi chassis capabilities command
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I0dd4a6eb90a070987a371649385f6d8f037d4e67
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
Mohaimen Alsamarai (2):
Revert "Add Fii oem command"
Add Fii-oem-ipmi command
Change-Id: Iac6bd7eb76c65db930ae992890bfff8189217420
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
|
|
Modify the initial script to boot host after the ssifbridge service
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I76a4d3b08ebd974edc097e4a52cdfc996dc28452
|
|
Add method to disable LPI mode for Ampere CPU when flash kudo bios
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Ieec4b93bceceb9e809482b14686582d0b1cbc971
|
|
1. Fix kernel_partiton offset after changes to upstream
2. Fix mac address settings for eth1
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Ia959dadce1c3336e4860c205d5702b186d11beff
|
|
Increase the /var/log/obmc-console*.log file to 1M
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I07cecebb6fe9c1d8e2d123951c67b3d33ce0da3b
|
|
This is apparently not actually working anymore and is removed in the
next poky update.
Change-Id: Ia1c6a258d124a4a30a14fc42e8e0bba95e64faeb
Signed-off-by: William A. Kennington III <wak@google.com>
|
|
update the recipes-kudo files
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I2ecf2156c0f7533d6d228967f8075cc306af6e00
|
|
1. remove the usb-network from obmc-phosphor-image.bbappend
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Iaccd431f0b712b201b213f9af44fd446a1c54b1f
|
|
1. correct the sensor name in EM json file
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I98df21ba91820fefccf86640433ca8786a81dcf5
|
|
add virtual sensors for DIMMG and CPU power
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: Id7c8269899caddcb68f11c75e867fa173b0b8ee4
|
|
Remove obmc-health-monitor
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I3a842f4a16212d143c8feb6b06ace1f7e074cb1c
|
|
Change the provider(kudo-fw) from virtual-obmc-system-mgmt
to virtual-obmc-flash-mgmt to avoid overwrite by
other package
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I55fad7c3a778ce9478313cd5303137622ea6741c
|
|
1. Add MAX34440 and MAX31790 to kudo.cfg
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: Id5e3109f5c25224b180974bd8e925ab676ad1b75
|
|
change blobs binarystore i2c address
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I479810d5f086a57c593a45d36ca8e26c33044414
|
|
1. Fix sensors in kudo.json
a. Update FAN threshold
b. Change NBM name
c. Change NBM zone name
d. Add DIMMG as virtual sensors
e. Update DIMMG threshold
f. Update NBM threshold
2. Add black list to fix pmbus scan issue
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: Id2b781bcc5d2740cec3895ce3096ed793990707b
|
|
1. remove FILESEXTRAPATHS_prepend from kudo-cmd.bb
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Ib043c7346a017f970818e5014442dc9e4bceed9d
|
|
Using phosphor-pid-control
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: Iea73a96bf4d8921d717fcf335ec463d0054089a5
|
|
1. Add Kudo.sh, a script for display and controlling kudo system
2. Add kudo-ras.sh for debug Ampere system errors on kudo system
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: I5763e0de4be942b9b851b910448d15135ca9db16
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. Modify kudo-boot.bb with latest sbin
2. Update init_once.sh with modified GPIO pins
3. Fix install for kudo-lib.sh for kudo-fw.bb
Signed-off-by: XP Chen <xiao-peng.chen@fii-na.com>
Change-Id: Id91d1325c70721bdc4e9fc7c541d43df33f05806
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. Add bbappend to phosphor-ipmi-host to include a needed header file
2. Add missing packages to obmc-phopsphor-image
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Signed-off-by: XP Chen <xiao-peng.Chen@fii-na.com>
Change-Id: Ib28a1232e0a84a1efa80b4b819cf7f9d3cb68955
|
|
1- Using Virtual sensor
Signed-off-by: mustafa <mustafa.shehabi@fii-na.com>
Change-Id: Id942cb0a1fb1032589476bc202148f47d1953c6e
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
Setting compatibility to the hardknott openbmc version
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: I86786013fcb3ed8614ab0f101ad21a3b1f16f456
|
|
Add _git to fii-ipmi-oem bb file file
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
Change-Id: Iec68d1f9eebbe9a0aa51d675579012e4ffac2af1
|
|
1. Support PCIe bifurcation information
2. Support BIOS boot count
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I2e9560bae7cd1dc1be680bfb9ef91917aced50e2
Signed-off-by: Mohaimen Alsamarai <mohaimen.alsamarai@fii-na.com>
|
|
1. do initialize during BMC boot
Signed-off-by: Lancelot Kao <lancelot.kao@fii-usa.com>
Change-Id: I5d3ff526a973152a96d00433eb86f7d7dd59e2d3
Signed-off-by: Mohaimen Alsamarai <Mohaimen.Alsamarai@fii-na.com>
|