Age | Commit message (Collapse) | Author | Files | Lines |
|
This application sets LEDs based on the contents of OpenBMC
event logs, and this will be done a different way on Rainier
and Witherspoon-tacoma so remove it.
(From meta-ibm rev: 553390e70165dc71f0efa3de074b497d998736e2)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I7831a225edc6382ee94b8c372ac6b2717bad172a
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This collects all of the PEL files on user and elog dumps.
They will show up in a subdirectory named 'logs' in the dump.
(From meta-ibm rev: 1a247b7c27ec3021bf7396874d34844ca2e6b033)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ia23a2fb72acfc1e4473d3c47ad78e34b37529f34
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Implement power-sequencer of phosphor-power for mihawk.
(From meta-ibm rev: 65dbe8b7c2ed9507ea5842e6e91b637a9069b947)
Change-Id: I00ee20fbcfcd6dc34724c2f7caf50cf7ae94d124
Signed-off-by: Andy YF Wang <Andy_YF_Wang@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Mihawk can use up to eight 250-soc.
Tested:
The user can see the temperature when using 250-soc.
(From meta-ibm rev: 74b7557b08ed2582861cd7da390d84371ec2ff86)
Change-Id: I17b0d969d0902f6470287c6164f542ad84412f7d
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Fan control must support 250 soc thermal sensor.
Tested: Fan speed is automatically controlled when using 250 soc
(From meta-ibm rev: 05540e77d337f466bc339715153704edff3f6b88)
Change-Id: Ic17854a8556b5878bf506bfafd64762315390c39
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The concept of warm reboot (reboot the host without removing chassis
power) was added a while back as a part of clarifying support for
the Redfish ComputerSystem.Reset Action. It has since been found that
some IBM hardware, including Witherspoon, does not support warm reboots.
The issue is intermittent and depends on the reboot being requested
while the host is in the middle of some i2c transactions. If a warm
reboot occurs during this window, then on the subsequent boot the i2c
hardware will be in a bad state and the host firmware is unable to
recover it.
Given this issue, it has been requested that BMC software go back to
doing cold reboots (cycling power to the chassis during any reboot
request) on this hardware.
The issue has only been reported on Witherspoon so for now only disable
it on that platform.
Tested:
- Verified within QEMU that an image with this commit used the cold reboot
target during a warm reboot request
(From meta-ibm rev: 567a8dcf84dfb74e7bd27d6239be2878fcacdde6)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I8d77c5e8bf7378a3d1accc79b510f14626a333e5
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This commit adds the D-Bus objects to enable the DHCP on the
hypervisor's virtual management interface.
New attributes are :
1. DHCPEnabled - At Interface level.
Values will be "v4/v6/both/none". Default is "none"
2. Enabled - At IPv4 object level : To indicate if the
Virtual Management Interface has consumed the IP
address or not.
Tested By:
1. busctl introspect xyz.openbmc_project.Settings /xyz/openbmc_project/network/hypervisor
2. busctl introspect xyz.openbmc_project.Settings /xyz/openbmc_project/network/hypervisor/eth0
3. busctl introspect xyz.openbmc_project.Settings /xyz/openbmc_project/network/hypervisor/eth0/ipv4/addr0
4. On rainier : similar tests for eth1
(From meta-ibm rev: 988412a2463a58f85f50648f9497a8779203087e)
Signed-off-by: Sunitha Harish <sunithaharish04@gmail.com>
Change-Id: I734347a8953cd11955eeaacfd67b815810587046
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This commit adds a new yaml file for holding the Hypervisor's
Virtual Management Interface's network objects.
This models two ethernet interfaces to the hypervisor and its
static IPv4 attributes.
Tested by:
busctl tree xyz.openbmc_project.Settings
(From meta-ibm rev: ae4ab28128052a57f8ddd4c910e27e04f92305d6)
Signed-off-by: Sunitha Harish <sunithaharish04@gmail.com>
Change-Id: I9a32d943867d26fbf215f248ab944e6f8750f415
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The phosphor-power updates for Rainier power supply VPD collection
introduces ibm-vpd configuration option. Use -Dibm-vpd=true for Rainier
builds.
See Change-Id: I431ae3ec8a9cb9c80a824029f110d5fd58a7d5d8
(From meta-ibm rev: 2f9e6a3b7be4ad5ff15344a6c63fa7577ccac6bf)
Change-Id: I14f9e573cc905fad72ea23c1195cb685f4be8c4c
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Use the installed `config.json` as the fan monitoring configuration to
load at runtime. This replaces the need of the build time YAML
`monitor.yaml` configuration.
Tested:
`monitor.yaml` removed from build image staging location
Built/powered on image using the `config.json` file
(From meta-ibm rev: 27be42e03193352d7c7ee51784448cb06d1b8e2c)
Change-Id: I80c268b26dddd820e7c9c640eab2d39452ab3a29
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 2c67f194f16568dac0de6dbf965e823790440639)
Signed-off-by: Tom Joseph <tomjoseph@in.ibm.com>
Change-Id: Ib34136cd472803d01d398462814b14c0e876d52f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
In prep for switching the witherspoon machine over to using a runtime
fan monitoring JSON configuration, install the configuration file into
the image now.
Tested:
Verified both `monitor.yaml` and `config.json` in phosphor-fan
Built/installed witherspoon image and config.json file present
Verified YAML config still used instead of present JSON config
(From meta-ibm rev: 36206800a699a1429d30ad32a36e4f960ac6c7b4)
Change-Id: I75d72a2731f201d37d38c9d436eff2af522bc6da
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This system will no longer be supported or maintained. Drop to minimize
cruft.
(From meta-ibm rev: 7c17e6a1f826cdfbbb39ffa3f237025e56fab52f)
Change-Id: Id954a1c91c754a1eb4eb67348c5fb01a115326ed
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
It was temporarily removed so that the commit that moves the IBM D-Bus
interface it uses from ibm-dbus-interfaces to phosphor-dbus-interfaces
could go in without getting compile fails.
The commit that removed it is bd17cae1d3a44f5fc82c4e037a91c97e092fcf57.
(From meta-ibm rev: a26d3db37979aaeab4343db41f5316425e9233e5)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ia4463e27411c1075d36119e6121dc2163335d6e4
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The IBM D-Bus interfaces moved into phosphor-dbus-interfaces.
Also temporarily remove ibm-logging from every image so that
ibm-dbus-interfaces won't be pulled in and CI can work.
(From meta-ibm rev: bd17cae1d3a44f5fc82c4e037a91c97e092fcf57)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ic8bf9106592c7e7d161d928708554a91d5bb407e
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
- As per the commit merged in phosphor-networkd, the ibm-config
flag is now changed to sync-mac.
(From meta-ibm rev: 7bd9b4a226207205adf0093b7c64bc69f20ad1dc)
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Ia02e350ffa3ca42e56f3cac4b0dbc14980fab3b7
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
- This commit enables the ibm-config flag for phosphor-networkd
service while compiling for IBM machines.
- ibm-config compilation flag would enable the configurable
Inventory-Interface Mapping JSON for setting the corresponding
MAC Address that are obtanined from the Inventory on to the
respective ethernet interface(s) during the first boot.
(From meta-ibm rev: 4b0db6e07d3207e256f01f2f34d144aa93950224)
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Fixed minor typo in commit message
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I31d284839969ea55f13165f5957c164b9b1f6ce8
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
- This commit removes the first-boot-set-mac service as the
similar and a better functionaly is now implemented in
phosphor-networkd service.
- Here are the few disadvantages of the first-boot-set-mac service
1. The first-boot-set-mac is a script is not scalable with the
increase in the number of ethernet interfaces.
2. Why do we need a new service just for setting the MAC Address
when the network service alone can do it , and it makes sense
to tie up this feature with Network as setting MAC address
functionality is implemented and owned by networkd.
3. With first-boot-set MAC, we need to make sure the VPD is populated
before , if for any reason the VPD is not generated the first-boot
service cannot help set the MAC.
(From meta-ibm rev: 8638c6eb8d54507b632088b329c104e859cd8d19)
Signed-off-by: manojkiran.eda@gmail.com <manojeda@in.ibm.com>
Change-Id: I955834b56c28f9a311563dd40607c8f2ba305d40
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
- This commit would enable a configuration JSON file, through which
one can map the inventory object paths to the actual ethernet
interfaces which are managed Network Service.
For Example:
- Lets say the Inventory path for a single ethernet Interface machine
would look something like below:
`/xyz/openbmc_project/inventory/system/chassis/motherboard/boxelder/bmc/ethernet`
Then the corresponding configuration JSON would looks something like below:
{
"eth0":"ethernet"
}
Note that the key (eth0) in the JSON is the actual ethernet Interface
managed by the Network Service, and the value (ethernet) is the search
pattern to be found in the Inventory Path String.
- The above JSON would help the phosphor-network service to look for a
match on the Interface Added signal under Inventory Path with an object
path that contains the pattern String ("ethernet"), and there it gets the
MAC address populated under the respective inventory path and set it as
the MAC address of the eth0 Interface.
(From meta-ibm rev: 0e69c800da414c88d24e4fa5fe8d9bf560b87637)
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I9e0ab9d8368efae226334086f7b1c5b6fa821770
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Functionality is now covered with non-native YAML providers
via packagegroup-obmc-yaml-providers.
(From meta-ibm rev: 367e4b7ebf2754f224db71cba40e159a24590c87)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: Id6331322ffe1de17c2741e6572437141ae721e29
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Remove the extra -native YAML provider dependencies and use the
non-native YAML providers obtained via the phosphor-loggging DEPEND.
Add a missing python dependency.
Simplify task dependency between do_report and do_install.
(From meta-ibm rev: f11928baab0df3b845f59786ec934e8fb7272b4d)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I05040555fc98808cf00db150f7dcfcfab807b9da
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: c453290155d686ce0d3604ea04db17cfcf06aa0d)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I559a93e0eadc92ebcdaa3aa4edd1923144986f48
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The hw-diags package adds advanced failure analysis support on Rainier
systems.
(From meta-ibm rev: 0cc373787485c1268efdfe2bf42364f84e07f80e)
Change-Id: Ia33d807ecce067747ef437b8761abf93254bc53d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This commit updates the recipe for phosphor-dbus-interface to
enable ibm-dbus-interface flag irrespective of the machine type.
This was required as in case of native build the flag is not set
enabled.
(From meta-ibm rev: f195655090bc91fa75a33e32828cfdd2a567c538)
Signed-off-by: Sunny Srivastava <sunnsr25@in.ibm.com>
Change-Id: I5d5c60068aa940c0762d0ad246410058c3854766
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 34c7a88436d2e425429b7a61065e25ce4a9b0664)
Change-Id: I9d4259e36c7c7225e5f29041e204f7d75dc15720
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Configure the fan monitor and fan control services to be protected by
the fan watchdog. In the event that any of those services fail to run
on the BMC, the fan watchdog would trip and push fans to 100% PWM.
(From meta-ibm rev: 0860865b6c1003d5440a2be4990fc399931be92c)
Change-Id: I6be11de61cae544089553f8791cf599f98ca04f6
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Configure and include the fan watchdog services to drive the fans to
100% PWM if the BMC loses communication to the fan controller chip at
any time (i.e. BMC reset while powered on).
(From meta-ibm rev: 1264216bc2f10cf08f697bc1c95f10237c95515a)
Change-Id: I18865bdc06c1a2be0c2a83d5e83402b9316ee845
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Create fan watchdog configs for all ibm-ac-server machines
Tested:
Built witherspoon and verified appropriate config files in image
Built swift and verified appropriate config files in image
Built tacoma and verified appropriate config files in image
(From meta-ibm rev: ab3b7b8e234134cc4d1123817de64708712cfc1f)
Change-Id: I75790b96077575878a9115072b016ad59a2f2420
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Remove the use of `witherspoon` in the names of the recipe, config
files, and services of the fan watchdog. This is in prep to use this
same fan watchdog on other machines within meta-ibm that have different
configurations.
Tested:
Witherspoon image matches image prior to change
Flash image to Witherspoon and force watchdog to trip
(From meta-ibm rev: 80f819efec08f7cc7de6988f64c0c77e20990f05)
Change-Id: I77295974397cd4903cd1a723b9ef97ee744d2557
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Andrew Geissler (1):
string: ensure string included
(From meta-ibm rev: 08bd223ad4ece904315c8f07d81877725ef748b7)
Change-Id: I897cbda96dab7672a4b4af80c351d2bcf6413f34
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Patrick Williams (3):
sdbusplus: remove deprecated variant_ns
MAINTAINERS: update Deepak's email address
sdbusplus: replace message::variant with std::variant
(From meta-ibm rev: cb0edf61272e12d2cd6de0c188e9e714bc2a13ff)
Change-Id: I115c1f69688745b4373b53e5f7dc8c185a9f8532
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Removing openpower-hw-diags from the witherspoon-tacoma packages until
openpower-hw-diags is changed to link with openpower-libhei as a packaged
library.
(From meta-ibm rev: 8628d8a06d56a0fa232c55119f9de184fa9813b3)
Signed-off-by: Ben Tyner <ben.tyner@ibm.com>
Change-Id: Ib129e45763742fb84eea1eb693a74e9c80228d90
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This was a P9 DD1 workaround. These systems are no longer supported and
are not found in the wild, so the workaround has been retired.
All of the p9 systems in the tree exclude the package so this change
should be a noop.
(From meta-ibm rev: 38c5c9539fb3f01fc2b96d483701938bffdf48a0)
Change-Id: I1c7786526dee4d9bb0d5db916890c1cbe3d51577
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The metadata common to all IBM systems is confusingly split between
meta-ibm and meta-witherspoon. Move everything to meta-ibm.
The meta-ibm README is re-written to more accurately reflect the scope
of the layer.
Allow the configuration samples (bblayers.conf.sample,
local.conf.sample) to be sourced from either meta-ibm or
meta-witherspoon until such a time that any workflows and tooling have
had the opportunity to move to meta-ibm.
(From meta-ibm rev: 6e05ef2e90b214eaf4e43ee7027bbbb1d8d09442)
Change-Id: I3ec890d5300f9649c974ea6b9dca93a2e8a889ab
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
sdbusplus has changed the package layout so that sdbusplus-native and
sdbus++-native are now ${PYTHON_PN}-sdbus++-native. Update recipes
that need to use sdbus++ (or its associated python modules) or remove
the DEPENDS if it is no longer necessary.
(From meta-ibm rev: 0b7c2ef33825f9672c60481ce5d84b240a1f38c3)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I80e4b2f244f3ec9b2576e623f2f78ff6ccf406d1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Matt Spinler (2):
create_error_reports update for python3
Update condense_policy.py for python3
(From meta-ibm rev: 47dd53f60371e0e87e87ee71180b38937d15fe3f)
Change-Id: I2dac97fd94b4b638e0ba3880a5a097be15d87def
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 04925b9f4076932f319fa62114526ce8fa709829)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I63a166b85792ed9192f5185847e03e8fe59a3a85
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This will be used so that during manufacturing test the PEL (Platform
Event Log) code that runs inside phosphor-log-manager can be told not to
send PELs to the host as that is not desired in some cases.
The D-Bus path is: /xyz/openbmc_project/logging/send_event_logs_to_host
and it uses the xyz.openbmc_project.Object.Enable interface that
provides an Enabled property. The default value is Enabled = true.
(From meta-ibm rev: 42cd2d857eb1d1c4ae6fdd8c9ee6c3c8de5ef7a0)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I9cab4f1c1efdda3a6d3f6f38f7c3e19690f452c2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
Updates for new association interface
(From meta-ibm rev: 19ce1444820160d3024e292e7863c9601508714a)
Change-Id: If1ab86647f0b8b90d72398d929e67cf16eaff1cc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
IBMBASE is only used for pointing at licenses...point at the
licenses in oe-core in meta/files/common-licenses instead. to match the
defacto convention used in other oe layers like meta-openembedded.
(From meta-ibm rev: cbbb0e5b4e44d831fce5daafd13272d401440f40)
Change-Id: Ib214f92b2c384e3eb2a1f53ecf4b21034438d001
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Creating and Registering service files with additional
text data to uniquely identify IBM BMCs in a network.
(From meta-ibm rev: 2c2b286604e82f89edd973bc15aee78ecf4b9a7f)
Change-Id: I3b843684f5df6a9b2cbe8a3709ee1203fb44ce42
Signed-off-by: asmithakarun <asmithkr@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
TFTP is already enabled by default using the existing REST api's. Code
was put in recently to also support TFTP via the Redfish
UpdateServices.SimpleUpdate object. By default this is disabled within
bmcweb. Enable it by default on all IBM systems to keep parity
with the existing REST api's
Tested:
curl -k -H "X-Auth-Token: $TOKEN" -X GET
https://${BMC_IP}/redfish/v1/UpdateService
{
"@odata.context": "/redfish/v1/$metadata#UpdateService.UpdateService",
"@odata.id": "/redfish/v1/UpdateService",
"@odata.type": "#UpdateService.v1_2_0.UpdateService",
"Actions": {
"#UpdateService.SimpleUpdate": {
"TransferProtocol@Redfish.AllowableValues": [
"TFTP"
],
"target":
"/redfish/v1/UpdateService/Actions/UpdateService.SimpleUpdate"
}
(From meta-ibm rev: f93d1c8da15a0d73be54b80eb0f042733d1f314f)
Change-Id: I2a9980b4bbb3bfd50550881e206154d1f69c0a24
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Moving LDAP and Authority instances of certificate manager
to common layer from meta-ibm layer.
As bmcweb implements Certificate schema which caters for uploading
HTTPS, LDAP and Authority certificates and is avaiable for everyone,
certificate manager services also need to be made available to
everyone.
(From meta-ibm rev: 13ac69d9c8138cbffd806bef19f1672ff2480c97)
Change-Id: I48b388629d058b8bea1cf92c154db72550d21f85
Signed-off-by: Marri Devender Rao <devenrao@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
ibm-logging was mistakenly removed.
(From meta-ibm rev: 25b56d7eda221f445ccff3393f1be1cb1055d482)
Tested: built WS image and ibm-log-manager found in rootfs
Fixes: 4b2c10ea8e
Change-Id: I07130bfcd6a45a0c5b4a2bf4b406cf300c7bd9d3
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
build: install into bin instead of sbin
(From meta-ibm rev: f246cda8a43f2414a8782a806b8080dbf9c8362f)
Change-Id: I797fc67f2597b5187815da29f6fa5164cae649ee
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
phosphor-rest-server and phosphor-gevent are no longer the project
defaults so no need to expliclty remove it any longer.
(From meta-ibm rev: 4b2c10ea8e3bf957ea43ccc2957eaf3369d69f96)
Change-Id: I889e2f7bdb93aa6e0ef563263515fc276ee7cd22
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Out of the box bitbake examines built applications, automatically adds
runtime dependencies and thus ensures any library packages dependencies
are automatically added to images, sdks, etc. There is no need to list
them explicitly in a recipe.
Dependencies change over time, and listing them explicitly is likely
prone to errors - the net effect being unnecessary shared library
packages being installed into images.
Consult
https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-RDEPENDS
for information on when to use explicit runtime dependencies.
(From meta-ibm rev: fa99caa61ecd28325e9070f268a51a5b52363bc4)
Change-Id: Icc97d4b33635caf127a17e70ba6c23f1367eb735
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The IBM layer doesn't use gevent anymore.
(From meta-ibm rev: eb9f2d1755c7370a049e4c4bb77dce60b6a61a1c)
Change-Id: I4dc4497f963619491293e17fd2d6008ea6aaecba
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
nginx is no longer supported, removing phosphor-certificate-manager
instance for nginx from image.
(From meta-ibm rev: 6430a4cd66fde71f0f6dc7068fc80a4e9c4bc989)
Change-Id: Iedd34d672b61c867b695fab2d8b5f1af55013610
Signed-off-by: Marri Devender Rao <devenrao@in.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Patrick Venture (1):
build: pkg anti-pattern: use defaults
(From meta-ibm rev: 186199f195fc0b33a9c9d477ae3801f7c94b1b3f)
Change-Id: Iaa102ec4c3a022474b375e11f80c5b233e057aa7
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|