Age | Commit message (Collapse) | Author | Files | Lines |
|
phosphor-led-manager has 3 packages
- phosphor-led-manager : Default
- phosphor-led-manager-ledmanager : Packages phosphor-ledmanager
- phosphor-ledmanager-faultmonitor : Packages phosphor-fru-fault-monitor
Because of this, it was not possible to install files via Makefile and
that always needed a corresponding update to FILES_{PN}-ledmanager.
Removing phosphor-led-manager-ledmanager will eliminate this problem.
Change-Id: I00ca4c34346a47f887872464b9050a46d8f5e8e9
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This commit adds below forward and reverse associations
"rType": "fault_inventory_object",
"fType": "fault_led_group"
"rType": "identify_inventory_object",
"fType": "identify_led_group"
Change-Id: Icaad89e6e690c3c0a635362e8c604874bc3f37fe
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This driver supports the TMP435 temperature sensor, which is used on 2
IBM manufactured PCIe cards, an NVME JBOF riser, and a PCIE gen 4 CXP
cable card. The former only plugs into Rainier, and the latter into
Rainier and Everest.
The TMP435 devices on these cards are powered by slot power, controlled
by the hypervisor, and so will not be accessible until the hypervisor
has started and has turned on slot power.
Note that the sensor instances for these cards will not be in the device
tree because they are monitored by the hwmontempsensors application
which gets its configuration information from the entity-manager
application. Entity-manager uses the 'new_device' API to instantiate
drivers, which does not need device tree entries. In fact, if these are
in the device tree, then the new_device write will fail even though the
device driver wasn't truly bound to that instance. As mentioned above,
because they are on slot power they cannot be probed as usual on kernel
startup.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I8aab28266f4e4b492c8d1c0c256714439ef1b5cd
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Tested:
- Booted up system with entity-manager loading rainier-1s4u config and
verified fan applications found and loaded new 1s4u files and system
was able to chassis power on.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I575a63edb242c1b94e1a6f1eafd86a96e4518e37
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I56ed73ee573df250072bd014a0e4c8a4072e974e
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I35333e49c883fb9ac8c84223545fe3b903a66d7d
|
|
The 1s4u is just like the 2s4u except it has two less fans. Thermal
profiling may change some of the variable but for now just use the same
as the 2s4u.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Iab3fd9d1699de779c242bb42456d976697b4da14
|
|
For implementing kdump Witherspoon-Tacoma and Rainier kexec is needed.
This was done by pulling kexec-tools package into the build.
Tested: I successfully build each Witherspoon-Tacoma and Rainier
booted each in QEMU and manually verified kexec with no parameters
showed the version and help. Presently the kernel's SMP is missing
HOTPLUG so further testing of kexec utility is not possible.
Signed-off-by: Bruce Mitchell <Bruce.Mitchell@ibm.com>
Change-Id: I253dd3e0c46987070b5c252dcd5ab6008b3b09d3
|
|
This commit enables phosphor-ledmanager to do lamp test
Change-Id: I4933ec034911198f99ae1289f681f15057310c33
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This enables phosphor-ledmanager to use JSON configuration file
Change-Id: I3cbd0bf6b60e81f9f0a479ad51dab438c708c6c1
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This layer provides libseccomp.
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
|
|
- We have already made the change to make the snooping
port optional, which means that snoopd daemon can still
run and host the interfaces & Postcode Raw Value property
even on the systems with no snooping port.
- The intent behind this commit is to over ride the snoop-device
name to empty from the meta-ibm layer so that the snoopd daemon
will run without the support for snooping port on ibm machines.
Tested:
- Build images for witherspoon-tacoma & rainier, and made sure the
snoopd service runs without any issues.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I622a903f9084a9b94561c1202f8c637d30062112
|
|
For installing gendumpheader plugin, the recipe was including
all files from tools/dreport.d/ibm.d.
Corrected it to take only gendumpheader plugin so that it wont conflict
with installation of other plugins from same directory.
Signed-off-by: PriyangaRamasamy <priyanga24@in.ibm.com>
Change-Id: I5a1358f07aba6997cb9ae84dba59b3420c7ce968
|
|
The firmware code in these power supplies takes about 1500 milliseconds
to boot after they are inserted, and the presence line goes active.
Until the firmware has completely booted, the power supplies will not
respond to the I2C traffic initiated by the BMC device driver code as it
attempts to probe the hardware.
Adding in a DRIVER_BIND_DELAY_MS environment variable, set to 1500
(milliseconds), to delay the device driver binding in order to hold off
the probe until the power supply firmware should be ready, in order to
avoid ENXIO errors.
Change-Id: I101f8e3b7ff1c2c9e76df758c4551c7793006266
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
|
|
- The intent behind this commit is to pull the snooping daemon
into tacoma & rainier.
- This daemon is used for hosting the necessary dbus interface
& Raw Value property for the pldm to write the progress codes
into.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I4730046a40345d74d53b19a5058e8e45d2d40e8f
|
|
The phosphor-inventory-manager application supports creating
associations based on JSON files, where the JSON files have conditions
built into them that say which inventory-manager property values are
required for the associations files to be valid.
Add minimal associations files for the Rainier 2U, Rainier 4U, and
Everest systems that just contain the fan inventory associations for
now. The condition is the 'IM' property on the com.ipzvpd.VSBP
interface on the system/chassis/motherboard path.
Change-Id: Ib6807d8982a2efeb94692b917804c53965d6c98a
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
|
|
Now that phosphor-fan-monitor starts at multi-user instead of the
fans-ready target, it needs a JSON config option to let it know when to
start monitoring after the fans have ramped up.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: If8eef303ee585dd30b3fbe9764a624eeab3b1a8a
|
|
Moved "inherit native" statements to the last position to remove QA Issues.
The message is: WARNING: QA Issue: {RECIPENAME}: native/nativesdk class is not
inherited last, this can result in unexpected behaviour. Classes inherited
after native/nativesdk: {CLASSFILES} [native-last]
Tested: The witherspoon image builds without the warnings.
Signed-off-by: Joseph Reynolds <joseph-reynolds@charter.net>
Change-Id: Ic3c71234abfcac8b26478bc32808e3bec8bba810
|
|
The feature was implemented as an append to the kernel (BSP) layers in
meta-phsophor. This created a three way dance between machine layers,
BSP and meta-phosphor, when it should have been the kernel layer
providing this feature and machines could then opt in.
Fixing this means we could remove the KERNEL_DANGLING_FEATURES_WARN_ONLY
workaround.
As the feature is simply turning on a pair of kernel options without any
other impact, we can implement it by adding the options to our
defconfigs. In fact, aspeed and hpe kernel configurations enable the two
kernel options:
$ git grep CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_KEYBOARD_GPIO=y
$ git grep CONFIG_INPUT_EVDEV
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_INPUT_EVDEV=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_INPUT_EVDEV=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_INPUT_EVDEV=y
meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_INPUT_EVDEV=y
Other machines that wish to enable this feature should ensure it is
added to their BSP's defconfig, or add it to their machine specific
defconfig.
Change-Id: I0726836319022f96c1d13d4a0cbd73708047302c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
- This commit would package the post-code-manager deamon
support for tacoma & rainier machines.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Ieea0b1516419d8cde2b93126fb278ffa16f0c15d
|
|
Upstream recipe moved the disabling of deprecated crypto algorithms into
a new DEPRECATED_CRYPTO_FLAGS variable.
(Klaus: also adjust phosphor's EXTRA_OECONF for this package to not
double-disable already obsolete ciphers)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I75e2c35ada37c9510a0af347772cdeb2b23d99e9
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
|
|
This application resides in the phosphor-fan-presence repo and creates
phosphor-logging based event logs for temperature threshold alarms.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Id5a7ce7590efe82eb1f9615853cabd58ac269c24
|
|
This will start phosphor-fan-presence at the multi-user target. It
doesn't need to know about the power state when just checking GPIOs and
tach sensors, so let it run all the time. It also avoids a race
condition with phosphor-fan-monitor if it starts earlier.
This commit also adds a JSON vs YAML packageconfig so service files can
be installed to different places based on how it is configured. And
since the service file has different contents based on when it starts,
the phosphor-fan-presence-tach@.service file was moved into the repo so
that the repo itself can determine which one to install based on how the
JSON vs YAML configuration option is set.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I4c00f0854974c70efb5097d0344c45385dbcb085
|
|
This new phosphor-state-manager package allows a user to track the state
of their hypervisor firmware. This new software utilizes the
BootProgress property to determine the hypervisor state and relies on a
different software entity (for example PLDM) to monitor state requests
and send the appropriate messages to the hypervisor firmware.
Includes the autobump which has the new function:
phosphor-state-manager: srcrev bump 58477b5287..75f38ee42d
Andrew Geissler (3):
hypervisor: state management support
hypervisor: monitor boot progress
hypervisor: reset requested host state on power off
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I4c4bfc06db3b38b114c28692db808cffceff628a
|
|
This is the configuration that CI builds.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ib9b2ccc554f7ca2c602cec57a300416105791412
|
|
This distro feature is not used anywhere. Remove it to reduce
the clutter.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I1dd4e5ae52197a377b552a8a0e7d1e6d7e7ebe7f
|
|
Most openpower machines use DISTRO="openbmc-openpower" but
Romulus has a "openbmc-romulus" distro config file. This
config file has nothing except an inclusion of the openpower
one, so remove this useless indirection.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I371ce4137369e4964eed1529f8a8190e31721ecc
|
|
Fan monitoring should not need the inlet rotors included in the nonzero
speed trust group. This causes the nonfunctional timer to start for
these rotors and immediately stop since they are never actually taken
into account in the determination of trust.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: I411faab9dcd67fa2409f6be39be54969a0eb2520
|
|
Fan monitoring should not need the inlet rotors included in the nonzero
speed trust group. This causes the nonfunctional timer to start for
these rotors and immediately stop since they are never actually taken
into account in the determination of trust.
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: I043f1003319e84e3c93b59f80963525d9d7d4eac
|
|
- The intent behind this commit is to enable & set OEM
specific options to pldm recipe via the meta-ibm layer.
- pldm in its current state, has a configurations folder
which contains all the configurations that are consumed
by the daemon at runtime.
- pldm also has an oem folder(s) that can contain the
vendor specific configuration files.
- So, removing these files from the meta-layer as they are
obsolete.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I91d23c37abff45f3da18676269be843610b6a9d1
|
|
The plan on IBM systems is that the host software will communicate via
PLDM which will utilize the D-Bus properties provided by this function.
Note that the new D-Bus interfaces provided by this function could also
be supported via Redfish. The PowerOnDelaySeconds and
PowerOffDelaySeconds properties within the ComputerSystem object would
map to what's provided here. There are no plans currently to do this
though as IBM's only use case is controlling this function via the
in-band PLDM interface.
Tested:
- Verified the generated image had scheduling service and function
worked as expected scheduling a power on then power off
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I781dfba0871853feafed49faa72bf1c05f657d85
|
|
Both rainier and witherspoon-tacoma systems support the mpreboot
feature.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ieeb4724a5cf5678ba0f6ab950b5403db5aebcd88
|
|
The memory preserving reboot is a feature utilized on IBM systems which
allows a system to be rebooted with its memory preserved. This is
utilized in situations where the host firmware has crashed and put the
processor in an unusable state. The processors are put back in a good
state by rebooting the system. Memory is preserved though so host
firmware can capture the relevant data from memory needed to debug the
cause of the failure.
This feature is implemented across a few different repositories within
OpenBMC so lets create a distro feature to enable it across all of the
software stacks.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ia16626ba6e46aa8de642abef677735ed957f9f9e
|
|
The ibmtpm2tss tools are required to use the Nuvoton NPCT750A TPM
from userland.
The ibmtpm2tss package also required OpenSSL camellia support, so
remove the override disabling that for those two machines.
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Change-Id: Ifc0afc58f4a31ea4b6d1750d470738d0d0e82754
|
|
There are some machines (Witherspoon-Tacoma and Rainier) that
have a TPM device, which will be used eventually. We need
access to the recipes in this layer.
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
Change-Id: I3b10ee4d39a69e651a790ae3238e39c45e21ce72
|
|
- This commit would package the biosconfig-manager for both
tacoma & rainier machines.
Tested By :
- With the changes booted the tacoma machine & observed that the
biosconfig-manager services are up & runnning
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I90542368a70284c97e1f33d29770c751a61631ca
|
|
The squashfs tools are used by PLDM during inband update.
Reference: https://gerrit.openbmc-project.xyz/c/openbmc/pldm/+/37510
Tested: Verified that the rootfs/usr/sbin/mksquashfs existed.
Change-Id: Id8d00765e72ce04bc8f039403a570aa7dca98b26
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Instead of using phosphor-dbus-monitor to create errors and handle power
offs for fan errors, use phosphor-fan-monitor instead, now that it has
the functionality. To do this, add the new rules to the fan monitor
config files, and remove the phosphor-dbus-monitor fan rules files.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ia03186132f04087be76d2fd43412c37698407f60
|
|
The VERSION_ID may not have a commit number for the cases a tag
is created, ex: 2.10.1. Since the code is expecting a commit
number of 1-4 digits, use a '0' if no commit number exists.
Tested: Created a tag 2.10.99 which sets VERSION_ID=2.10.99.
Without this change, build fails with:
"Exception: IndexError: list index out of range"
With this change there are no build errors.
Change-Id: I3b56ebc1844ec6748b92cca3484f9aa1f4d983f8
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
I've been utilizing my gerrit admin abilities to merge autobumps and
backup Brad in these meta layers. The OWNERS plugin disabled this
path for me. My intention is to keep with this same workflow. I'll merge
autobumps and backup Brad as needed.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ib248c6122644dbbd4b024ed07eb7259db85daf1e
|
|
(From meta-ibm rev: c203fa3d1ca3de7d61b3c06a22dbf4385202cc78)
Change-Id: Iab1adeab9ff493e05e26f31f72c9cb708f28e73e
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379
for details about why this is necessary.
(From meta-ibm rev: 501f9fd6b63c8b11c0ae0f6268a98c33b764caa0)
Signed-off-by: Ed Tanous <ed@tanous.net>
Change-Id: I05862abb52f7fac1bcf4fdd939a1101aa2431f9d
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The rule of thumb within OpenBMC is to utilize a wants relationship with
targets, especially the multi-user.target. This follows the general
design of always allowing the system to continue whenever possible.
For example I'm doing some bringup in simulation where these services
are not required, but their failure is impacting my ability to reach
a successful multi-user.target state which impacts other targets that
depend on it.
Tested:
- Verified multi-user.target completes successfully now on my bringup
system
(From meta-ibm rev: f2f6d38efdfa1a88a5f41b9871e0d3aa76f193d1)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I687fbbb7006a3d9b9abe1d308802914d64224410
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Everest has the max31785 at a different i2c address that is behind a
mux, so install its hwmon config at that associated location.
Tested:
Hwmon instance for the max31785 starts successfully on Everest
(From meta-ibm rev: cd84eb53a79edcabddd5e7720f9e0389f4e96151)
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: Ide9ca8bd76d708ef9453dc7d02526dfbb1dd8a30
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Rainier does not need/want the old PSU monitor.
(From meta-ibm rev: eba91da180e9ec5b7260aebb87fb05ab1e48c930)
Change-Id: I6c9e58257cd7a8b3a675b69ae3d88603a8fb0e94
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Corrected the gpio pins and paths for detecting fans wired to a PCA9552
behind a mux according to the Everest schematics. Fan presence will fail
to access these gpios until the Everest dts is updated to expose them.
(From meta-ibm rev: 072949a9b84112572559baa76d12b9a7c77f8547)
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: I9456ff8bd4298f3414f41180732e8e17b738acfa
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Temporarily remove detecting fan presence by gpio on Everest until the
gpios are added within the dts and accessible in userspace.
(From meta-ibm rev: 7c4944f2dfd2ce5ab811f7e07a5a4d8de5949ee4)
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: I62f80e494a9d0feffa45cc3a1e08f0a859fca35b
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Remove extraneous commas from the Everest fan monitor JSON config so it
can be loaded/parsed.
(From meta-ibm rev: 84d05fda258fbd02650d859f6fe9a77a6e5ef7a6)
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Change-Id: Ib0b044f8657593137d67cec036ab615e265398e3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
openbmc master has exceeded the available flash space on witherspoon.
Remove LDAP so it fits again and we can continue to use witherspoon for
HW CI validation of openbmc master commits.
IBM has forked off its own openbmc repo for maintenance of customer
witherspoon systems. Therefore it is not necessary for openbmc
master to continue to support everything.
Tested:
- Verified generated image flashes on witherspoon and HW CI tests passed
- obmc-phosphor-image-witherspoon.squashfs-xz 19.27MB -> 18.53MB
(From meta-ibm rev: 6390f0999f00b1cdfe19daf2d7e8868c25808497)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I39b5d785919bdcd54b6bcf04217439050442f119
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The phosphor-debug-collector renamed "host-dump-offload-transport" build
option into "host-transport" to make generic for supporting other host
dump action (i.e create,delete) not only offload so, changed build option
here as well based on phosphor-debug-collector.
phosphor-debug-collector patch:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-debug-collector/+/38792
(From meta-ibm rev: eb951216a95e360431644dba46f04fc0541fb608)
Signed-off-by: Ramesh Iyyar <rameshi1@in.ibm.com>
Change-Id: I4466896b67cb7490b13e6c32113bb59651fbcdb3
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|