Age | Commit message (Collapse) | Author | Files | Lines |
|
This reverts commit 09415220c11012635c5de3e9e70ef17d1956ecc4.
The layout of the wks file is still being worked out.
(From meta-ibm rev: fea65fe4cf652ea9d207d114bc5be9cac4c5533a)
Change-Id: I91e8b1b6397f090578b8cd548c0035616666477a
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Build a wic image with the zImage and device tree in the
/boot partition. Rename the device tree to aspeed-bmc.dtb
so that it's generic instead of having the machine name in
the file.
(From meta-ibm rev: 09415220c11012635c5de3e9e70ef17d1956ecc4)
Change-Id: I0beb845d2de8a2b92d8f7300081054ab04265b52
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Add the phosphor-fan-control-init service back in to trigger the
obmc-fan-control-ready target which is used to start
phosphor-fan-monitor. It was not realized that this target was set
within the fan control application's init mode.
Tested:
Built witherspoon image containing phosphor-fan-control-init service
Service is started at poweron and sets obmc-fan-control-ready target
Fan monitor service now starts
(From meta-ibm rev: dc97a9316915d3adc5a31846b76e6a3c2f6cab8e)
Change-Id: Ic0124fec814a6d1588c5dc47e5e16ab8529248bf
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This reverts commit f2f334e6221b659934a8e72f5ca1aa8c9b8ae173.
The u-boot openbmc spl defconfig is still in review:
https://patchwork.ozlabs.org/project/openbmc/patch/1586370073-71433-1-git-send-email-anoo@linux.ibm.com/
(From meta-ibm rev: 5bea35bdaa05c736796bd1d0f22f0c7eaee9b484)
Change-Id: I134d9044595c1e129d8b545ac4e4429a8a4d9f2b
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: b2f780f527e156adff88c3c8e05fe87762266db6)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I523e93b55dd1333640ef7e84aa596b5efb06c4ca
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: f2f334e6221b659934a8e72f5ca1aa8c9b8ae173)
Change-Id: I27c9d505b0699a2d1b1f58a8ce1349b17f15821a
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The design uses the same configuration as Rainier.
(From meta-ibm rev: 499fc3dae676b969abe64ec58aaa3021910c7bfa)
Change-Id: Id8520b86804d2495e37a1b092491ceeddc2b11a0
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The Rainier design makes use of both virtual UARTs provided by the
AST2600. Expose them both to the network via obmc-console.
(From meta-ibm rev: 9c0807e8741e95b33cad604d62138650ac2143ea)
Change-Id: I8659fad4809a859b857bfc91a14defcfbc3b030d
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The obmc-console has rearranged its configuration file layout to cater
to concurrent console server instances. Make use of the new layout.
(From meta-ibm rev: 43fb498820e2b21282197833ed52124792a472e5)
Change-Id: I124fd5cf37047651bc1f046039ad4b776eb2ff62
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 9508c70494a7d0ae3bd8f2a2fe662407ae642ad5)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ib03ada135194b8dffdd3982a98ff08bbbc131995
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
There were a couple _${PN} (package name) style overrides added to
DEPENDS and EXTRA_OEMESON with 438174de3490. The package being built is
only addeed to OVERRIDES during the packaging task. DEPENDS and
EXTRA_OEMESON are used during the configure task. The result is DEPENDS
and EXTRA_OEMESON are not updated as intended.
(From meta-ibm rev: 4e1950490e3329c1f9f193cba7f2739df6456c59)
Change-Id: I7a902ad4ca07cb590cd1bad5f5d1046ecaa9d63e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The mmc-ext4-tar image is used for MMC code updates.
(From meta-ibm rev: 4471bfb1798201d4b7f03912600474825034db0c)
Change-Id: I9c26f9eebfccccce80eb405d8ddf9f7b59c34fd8
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
In order to detect the riser card on the mihawk platform.
(From meta-ibm rev: a50f69fb50ab68137ce1b95d79ccb703c97e47c4)
Change-Id: Ief0019f08cc14f3733ba5db67fcf218f46812bb2
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
sdbusplus has changed the package layout so that sdbusplus-native and
sdbus++-native are now ${PYTHON_PN}-sdbus++-native. Update recipes
that need to use sdbus++ (or its associated python modules) or remove
the DEPENDS if it is no longer necessary.
(From meta-ibm rev: 0b7c2ef33825f9672c60481ce5d84b240a1f38c3)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I80e4b2f244f3ec9b2576e623f2f78ff6ccf406d1
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Matt Spinler (2):
create_error_reports update for python3
Update condense_policy.py for python3
(From meta-ibm rev: 47dd53f60371e0e87e87ee71180b38937d15fe3f)
Change-Id: I2dac97fd94b4b638e0ba3880a5a097be15d87def
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Updated packagegroup-obmc-apps recipe to build openpower-hw-diags.
(From meta-ibm rev: 3816f263d4dff1cf3ab2d55122935d051694a592)
Signed-off-by: Ben Tyner <ben.tyner@ibm.com>
Change-Id: Ib69e46853e26087343bf88bb09c7c1b463daa5be
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Now that the PEL code is enabled for this system, we don't need
ibm-logging to provide IBM's logging functionality.
(From meta-ibm rev: e131146858d6154e3c26a7b1ed1db8a7ed43385c)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I294a5c1254e661f44882e5d4f71fde7e70ecc029
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This patch has been added to the openbmc kernel tree, so remove it here.
(From meta-ibm rev: 77742a12a561aa70c9e413634ccabefe1297879e)
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Change-Id: Ie0827dc0ac530ac3f9adbfbd8af3a6bdbdee19a9
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Creating Platform Event Logs from OpenBMC event logs has already been
enabled on other systems, and this commit enables it on
Witherspoon-tacoma.
(From meta-ibm rev: fb1595d74e96dd18d5f957bb53e12127f12932c9)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ie6be582c2ab417a3752ff43bf37330c6920fa297
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This commit fixes the inventory file used by openpower-vpd-parser
on Tacoma. Changes include:
* Fix the EEPROM path used to point to the right I2C bus.
* Fix the FRUs and OBJECTs that the file contains.
Tested:
Made sure that the right inventory file makes it to the image.
(From meta-ibm rev: f591790414025f25947b2327021e86d4d70709ab)
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Change-Id: I20852c9cc2aa6875673925c7588b335dc2ee29d0
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The commonly used target for Tacoma is to build obmc-phosphor-image.
(From meta-ibm rev: 2789e4e691624911c9f570a9451518f7947a4e9e)
Change-Id: Ie9e53df2127713cc467d85aafe2cd9f9aef2f7c5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This configuration doesn't enable the rear uart.
There has been an issue when sending large amount of data from the VUART
-> obmc-console-server -> UART that is still under investigation. The
rear uart is not used for development, so it can be disabled for now.
(From meta-ibm rev: e3befcfc5e7e89bba7eba316c01e2b93001029a4)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ib3ec92572fd8551a3d6db39616b016730edf5612
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Set the configuration file to phosphor-cooling-type to set all
witherspoon tacomas to be air cooled only.
Tested:
Removed DEVICE & CODE on witherspoon config to see always be set to
air cooled
Updated config on witherspoon tacoma and restarted service to see
always be set to air cooled
(From meta-ibm rev: 373d3485c500ee8d3d07f2f68d0fec896856c374)
Change-Id: I1bf483da9580c4fd4b833da5840a0a98e691a811
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Add PLDM based host dump offload support for Witherspoon-128,
Rainier and Witherspoon-tacoma.
(From meta-ibm rev: 2350054c62b5783cb49fd12671cb70809be4e573)
Signed-off-by: Dhruvaraj Subhashchandran <dhruvaraj@in.ibm.com>
Change-Id: Idf26b5cc66860553db651f90b57cd0ac0b7cfd9f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: c01884719907cf567e748bb00d6ebf3c13dbb1db)
Signed-off-by: Sunitha Harish <sunithaharish04@gmail.com>
Change-Id: I0c42518e03f06d06baec4a03095180e71508c065
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
We want to make mihawk's led names the same as witherspoon.
(From meta-ibm rev: dfef3e04755e7be5dad40dc7d0cb064372b49694)
Change-Id: I60cc8b17df0956a230e1a2824f4a3e247f5a4624
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 04925b9f4076932f319fa62114526ce8fa709829)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I63a166b85792ed9192f5185847e03e8fe59a3a85
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
phosphor-power recipe is splitted into separated packages.
In packagegroup-obmc-apps.bbappend, define
POWER_SERVICE_PACKAGES_AC_SERVER to include the packages for IBM AC
servers and POWER_SERVICE_PACKAGES_RAINIER for rainier server.
The package cold-redundancy is not included yet because the repo does
not install the files yet.
In phosphor-power bbappend, use separated packages as well.
It also add phosphor-power to install the psu.json in witherspoon's
phosphor-power bbappend, which is needed for multiple packages.
Tested: Verify all the ac-server services and utils are installed into
Witherspoon's image as before.
(From meta-ibm rev: 438174de3490d800181ecd26ac162c6ebe442194)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: I76808e92de7cf144ba2a3b7a455af582eaad3d33
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This selects the ast2600 openbmc u-boot configuration and the tacoma
device tree.
(From meta-ibm rev: b36b9ebc7f25a7d86d5c0e1cec81f156633921bd)
Change-Id: I079fc3d82ae1a453719923c743f58dd2c529968d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This selects the ast2600 openbmc u-boot configuration and the rainier
device tree.
(From meta-ibm rev: d3ed8678c77cd88a1953721b053f4fc6c1918fd1)
Change-Id: Id97193d6f19e5e6b7e796880d13976417e79f92c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Build an ext4 rootfs image for tacoma to be used in its eMMC chip.
(From meta-ibm rev: 211b39b9b2de6bf558c03b9cf92824d3408a52b9)
Change-Id: I45d6435b7caf7e3f28fc6a8a47a40bc62e96fb20
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Rainier plans on using the refactored power supply monitoring
application. Add that package to Rainier by appending it to the list.
(From meta-ibm rev: 11e5638b1df8c10c5cde5ab605410b5d6a7c3eab)
Depends-On: I3c1aa4f0daac6a85bb60fc775a5c48dbf3ea203b
Change-Id: I035f2687539ae1f7d57d07ee8efc0d3b2b6b1eff
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The GPIO lines for the power supplies changed from Witherspoon to
Witherspoon-Tacoma. The power supply presence lines are GPIOH3 and
GPIOE5 (key 59 and 37). The power supply input history sync is on
GPIOE6 (38).
Tested:
witherspoon-tacoma 2.8.0-dev-1205-g01aee77e4 chassison fails
Flash custom image with these changes
witherspoon-tacoma 2.8.0-dev-1272-g22036b442 chassison succeeds
(From meta-ibm rev: e023c109f4a53212ee8ea880a82dd7f0432b8f1c)
Change-Id: I0cf1afa738036c5cceb13a9df85c23ff660b97be
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Fan control must support NVMe SSD thermal sensor.
Tested: Fan speed is automatically controlled when using NVMe SSD
(From meta-ibm rev: 4dc75c91139e71ee5f42ba27ddacf46815c8aa8b)
Change-Id: Idb156ebe12d98b26faa7781b462e11b38af5ae7c
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update to Version 1.8.5 for mihawk
(From meta-ibm rev: bf39d8f7981252cf0a56f75fd7e5533a828ceb08)
Change-Id: Ief4321ca06d729b6b735532c1a03265c63ab0d5d
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Added the BMC inventory for mihawk.
(From meta-ibm rev: 95efbf1fdb48951294a3832137d4c1a56fcab3a2)
Change-Id: I3478e33ce305324d2041e69d79d8873585cae23d
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit enables the configure option "enable-ibm-dbus-interfaces"
for phosphor-dbus-interfaces build to pull in all com.ibm.*
interfaces.
Tested:
Bitbaked to ensure the right configure options are passed.
(From meta-ibm rev: 8a2fdae730a41fb96887b6d404679800a9f74c8d)
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Change-Id: I788ad7ce6e4e92567176f6dda235f6689d577260
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable the use of JSON and install the fan presence JSON config file
into the witherspoon image. The other fan applications will continue to
use their respective YAML build time config file(s).
Tested:
Built witherspoon image, uses JSON config
Built mihawk image, continues to use YAML
(From meta-ibm rev: a6817ca6ca8c87a10eb325835ba4db59109f6101)
Change-Id: I1b675e8a3b064b04007d7474d12e5d5ad2094dad
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
JSON config file representing the same configuration that is given as
YAML at build time.
(From meta-ibm rev: 7e31e7a23d51757132e4d74873a16c65f2a1400b)
Change-Id: I8cb2697d93d402bb66f5967cba913e071a16f6b7
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently mihawk is missing information about dev id.
(From meta-ibm rev: 28bafefc05285df52eab617ea2158b3886dc93a8)
Change-Id: I02b138a1830e0c4627c70b338d31cb7dbaa2d75c
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This will be used so that during manufacturing test the PEL (Platform
Event Log) code that runs inside phosphor-log-manager can be told not to
send PELs to the host as that is not desired in some cases.
The D-Bus path is: /xyz/openbmc_project/logging/send_event_logs_to_host
and it uses the xyz.openbmc_project.Object.Enable interface that
provides an Enabled property. The default value is Enabled = true.
(From meta-ibm rev: 42cd2d857eb1d1c4ae6fdd8c9ee6c3c8de5ef7a0)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I9cab4f1c1efdda3a6d3f6f38f7c3e19690f452c2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Support to set the value for ClearSecurityKeys property which can be used to
indicate when certain security keys need to be cleared or reset those values
back to its default state from the system by the host. This property is mapped
to an IPMI sensor and default value will be zero. Setting this property does
not gurantee a successful operation as additional conditions like the physical
presence pin or jumper settings will be checked by the host to clear/reset the
sensitive data.
Tested: Verified that the property is getting created with the expected
default value as zero and can be updated to different values using ipmitool
or busctl command.
1. Default value output:
busctl get-property xyz.openbmc_project.Settings
/org/open_power/control/host0/ClearHostSecurityKeys
org.open_power.Control.TPM.SecurityKeys ClearHostSecurityKeys
y 0
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
00 40 00 00
2. Set to a new value as 5 using busctl command:
busctl set-property xyz.openbmc_project.Settings
/org/open_power/control/host0/ClearHostSecurityKeys
org.open_power.Control.TPM.SecurityKeys ClearHostSecurityKeys y 5
3. After setting to a new value as 5:
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
05 40 00 00
4. ipmitool command to set the value as 4
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x30 0xE8
0x00 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
09 40 00 00
5. Invalid value test o/p:
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x30 0xE8
0x00 0x12C 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Given data "0x12C" is invalid.
(From meta-ibm rev: 81a9143100d5d4a7d97350afa1794be694d45590)
Signed-off-by: Jayashankar Padath <jayashankar.padath@in.ibm.com>
Change-Id: I9e12b6e5abb3a9b198921847605a74b771fd9945
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tacoma was missing the OBMC_POWER_SUPPLY_INSTANCES config, and thus the
power supply monitor service will not start correctly.
And with the change in
https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/27463
the build will fail on constructing the rootfs.
Fix it by adding OBMC_POWER_SUPPLY_INSTANCES in tacoma config.
(From meta-ibm rev: 1f2b96d73f0117b9c07ce7e4beca0e1dfddfb8e2)
Change-Id: I20f1ca81642bb1d594aa783ca3872b6bd08720da
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
HW CI on Palmetto trigers two issues:
1. The case to verify occ active fails because it was using the last
character of `cpux` for occ, e.g. cpu0 -> occ0.
Palmetto had an incorrect inventory path of `cpu`, which results in
`occu`, and it becomes an incorrect path, and the case gets a 404
error while trying to get the OCC active state.
2. The case to get https://$bmc/ fails, it's expecting HTTP 200 OK
resonse, but got a 401 error. This is because webui is not built into
Palmetto, so there is no page, and bmcweb returns 401 for such case.
Fix the above cases.
Tested: Verify the HW CI succeeds on Palmetto:
python3 -m robot -v OPENBMC_HOST:palmetto --argumentfile \
test_lists/HW_CI --exclude Verify_Redfish_Host_PowerOn --include \
Verify_Redfish_Host_PowerOn_No_Check_Watts redfish tests
(From meta-ibm rev: 4ac52cb28db30f89bdfd23ab1614f71b65dfdceb)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: Ifd102f167cfa4d83769fb055b883e4c214a27b9a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The yaml add the "xyz.openbmc_project.Inventory.Item.Chassis" interface
to "/xyz/openbmc_project/inventory/system/chassis" object.
This is needed for bmcweb to correctly get the chassis id in
/redfish/v1/Chassis/.
Tested: Verify that /redfish/v1/Chassis/chassis exists on Palmetto with
this change. It was 404 without this change.
(From meta-ibm rev: 5930fdcc620b5ab65418b748b3cc0db465dc05fb)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: I67d5458d4540feacc67bd558dabb642b377f508b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The yaml add the "xyz.openbmc_project.Inventory.Item.Chassis" interface
to "/xyz/openbmc_project/inventory/system/chassis" object.
This is needed for bmcweb to correctly get the chassis id in
/redfish/v1/Chassis/.
Tested: Verify that /redfish/v1/Chassis/chassis exists on Romulus with
this change. It was 404 without this change.
(From meta-ibm rev: 41b829feead473e5541f7d4c3c075e2b1a525c45)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: Ie091ad32315fb4b4e45d8b35966a7a238dd1d539
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently avsbus-disable will be executed after power_up to 1.
We found that this will cause power on fail, so avsbus-disable should
be performed before power on.
(From meta-ibm rev: c569a42895ac035837f1508d14903cfea3c5a675)
Change-Id: Ib08573efbb1abf510b2683afd31cd74db9f66a2b
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Reviewing GPIO function with engineering, BMC_DCM_ALL_RESET_N GPIO
should be handled differently. Remove BMC_DCM_ALL_RESET_N from Rainier
power-on GPIO configuration.
(From meta-ibm rev: de595e38e6c38729d7e0c7eb6925fe639cbb5b85)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I2fa2949b49d192b0a3a6a516c3ce9c49052dd3d7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The power-supply-monitor configs were installed by
SYSTEMD_ENVIRONMENT_FILE_${PN}, which is defined in
obmc-phosphor-systemd.bbclass.
phosphor-power recipe does not inherit obmc-phosphor-systemd, results in
the files installed by SYSTEMD_ENVIRONMENT_FILE_${PN} are not installed
at all.
Fix this issue by inherit obmc-phosphor-systemd in the bbappend.
Tested: Verify the witherspoon build includes the power-supply-monitor
configs.
(From meta-ibm rev: d4374bf93e5927ccadb9de954384096ffb8590ec)
Change-Id: Iaa3a04694c7b591d349a32529a0afef16239203d
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Although 6 fanx_1 pwm targets are deleted, but fan0_1 fan1_1 and fan2_1
will have a default value that causes the issue to remain unresolved.
In this way, two Fans control the same pwm, but I think that our
current fan control event is controlled at the same time, so it does
not affect the fan control.
(From meta-ibm rev: c4ec0f10a091fe74f075d2033fe055b5bbd7d498)
Change-Id: I42647c92ffe5e20430cee28de6fd26e2716153d9
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|