Age | Commit message (Collapse) | Author | Files | Lines |
|
Replace rainier with p10bmc as build target. Keep the rainier.conf as a
symlink to p10bmc.conf to allow the transition. Remove the rainier.conf
and the machine override from p10bmc.conf in a later commit to complete
the replacement.
Tested: Built rainier and p10bmc and checked for some files/service
units to exist on both.
Change-Id: Ic8c8c6ffbc3507fbd9c692da259e37ae695359a6
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier system is being replaced with the generic p10bmc name.
Since the rainier.conf file will be renamed p10bmc.conf, add the device
tree files for all p10 systems that will be supported with the p10bmc
name (rainier, everest).
Change-Id: I10983b913d8a2ae98ed4d327131b864f2df96a0c
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built rainier and verified files were installed:
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-inventory-manager/ibm,everest_associations.json
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-inventory-manager/ibm,rainier-4u_associations.json
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-inventory-manager/ibm,rainier-2u_associations.json
Change-Id: I422374d25966e731147eebd1772d5cfc4f62f9d9
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built rainier and verified the fan files were installed, ex:
obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-fan-presence/control/ibm,rainier-4u/zones.json
obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-fan-presence/control/ibm,rainier-2u/zones.json
obmc-phosphor-image/1.0-r0/rootfs/usr/share/phosphor-fan-presence/control/ibm,everest/zones.json
Change-Id: I10edb9e30716cffa3f510fe94822eadb08326912
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
Latest upstream yocto has moved on to the 3.3 hardknott release
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Ieae36798d66d21c2c642931f06407d3bb2acf163
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I0a265a7eb9d763a8385a7139dae47bf2f475c672
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I0ab8ca402117e6eae8508d3f27cac7ad8c8b8aca
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built a rainier image and verified the journal config files were
present under:
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/lib/systemd/
Change-Id: Ia5c1de23fdbf7b8aeed70bd450cb72254542eb41
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built rainier and verified that the mboxd service file had 64M:
$ cat tmp/work/rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/lib/systemd/system/mboxd.service
..
ExecStart=/usr/bin/env mboxd --flash 64M --window-size 1M
Change-Id: I7c5bf66ac38ab0b97efa1eba7ceccba86565ed85
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: Ic76f6202f9ae43440e5e6a793ca835a45d6ab088
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I5e0b884b405f56da7aa746b059d2490a1de2caab
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I5b7b173bd0255fcbe1956042cc365bf1fb6c7520
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I43d08c3be45d8cc8b03914b9bc257df2668e9fe0
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: If32498a59ce621b1e456fdf0ec965c92d646ab86
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I7bfbbf2310be78a2ae601047710204f5fb9f0da0
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built rainier and verified the console files were installed:
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/obmc-console/
Change-Id: Ida1010ae6c6c0e1eecf2b62521c06bfe055b0d88
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I3947988f73e601ca281b6222a6116bc7f50c8c32
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: Id9cbde5f3ccc505635c37c8ffd92efef191e9320
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I9fa2bb6f199144816bd9d90405afe4fba36fc575
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: Iba75dcfe5eee66bcb0afb5a01feddbf26b2c7988
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Change-Id: I430e6ed6bf006a114e185d4adb507d1c5c6e2cd4
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBM rainier machine name is being replaced with the generic p10bmc.
Tested: Built rainier and verified the files were installed as expected:
rainier-openbmc-linux-gnueabi/obmc-phosphor-image/1.0-r0/rootfs/etc/default/obmc/gpio/phosphor-power-supply-0.conf
Change-Id: I6539c71cfc37fa67027204b17c68a0c7f8fec5a6
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
The IBMC POWER10 systems will have a common BMC image, therefore there
will be a transition to move from the 'rainier' system name to the
generic 'p10bmc' name.
This will be done in two stages. The first one is to create a p10bmc
MACHINEOVERRIDES and replace the rainier conditionals with p10bmc.
Once that's done, the rainier.conf will be replaced with p10bmc.conf.
Change-Id: Ic499d36dd7f74a8b7f4a44723f76d1e344e15a32
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
|
|
These virtual physical LEDs are a mirror of real enclosure fault
and enclosure Identify physical LEDs. However, these virtual LEDs
are needed to be able to communicate the effective state of the
enclosure fault and enclosure identify LEDs during lamp test.
During lamp test, real physical enclosure fault and enclosure id
LEDs should not be updated and they must be updated only after
the lamp test finishes. However, Hypervisors would need to know
the effective state of enclosure level fault and identify
LEDs and that problem is resolved by these virtual LEDs.
Once the lamp test finishes, these virtual physical LEDs would again
be in sync with real enclosure fault and Identify LEDs.
Tests:
root@bmc:/lib/systemd/system/multi-user.target.wants# busctl tree
xyz.openbmc_project.LED.Controller.virtual_enc_fault
└─/xyz
└─/xyz/openbmc_project
└─/xyz/openbmc_project/led
└─/xyz/openbmc_project/led/physical
└─/xyz/openbmc_project/led/physical/virtual_enc_fault
root@bmc:/lib/systemd/system/multi-user.target.wants# busctl tree
xyz.openbmc_project.LED.Controller.virtual_enc_id
└─/xyz
└─/xyz/openbmc_project
└─/xyz/openbmc_project/led
└─/xyz/openbmc_project/led/physical
└─/xyz/openbmc_project/led/physical/virtual_enc_id
root@bmc:/lib/systemd/system/multi-user.target.wants#
busctl get-property xyz.openbmc_project.LED.Controller.virtual_enc_fault
/xyz/openbmc_project/led/physical/virtual_enc_fault
xyz.openbmc_project.Led.Physical State
s "xyz.openbmc_project.Led.Physical.Action.Off"
root@bmc:/lib/systemd/system/multi-user.target.wants# busctl
set-property xyz.openbmc_project.LED.GroupManager
/xyz/openbmc_project/led/groups/ddimm0_identify xyz.openbmc_project.Led.Group
Asserted b true
root@bmc:/lib/systemd/system/multi-user.target.wants# busctl get-property
xyz.openbmc_project.LED.Controller.virtual_enc_id
/xyz/openbmc_project/led/physical/virtual_enc_id
xyz.openbmc_project.Led.Physical State
s "xyz.openbmc_project.Led.Physical.Action.On"
root@bmc:/lib/systemd/system/multi-user.target.wants# busctlset-property
xyz.openbmc_project.LED.GroupManager
/xyz/op_ebmc_project/led/groups/ddimm0_identify xyz.openbmc_project.Led.Group
Asserted b false
root@bmc:/lib/systemd/system/multi-user.target.wants# busctl get-property
xyz.openbmc_project.LED.Controller.virtual_enc_id
/xyz/openbmc_project/led/physical/virtual_enc_id
xyz.openbmc_project.Led.Physical State
s "xyz.openbmc_project.Led.Physical.Action.Off"
Change-Id: Ic0ee5b0f376911650d5489d8bb84a4e83247190f
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
phosphor-led-manager has 3 packages
- phosphor-led-manager : Default
- phosphor-led-manager-ledmanager : Packages phosphor-ledmanager
- phosphor-ledmanager-faultmonitor : Packages phosphor-fru-fault-monitor
Because of this, it was not possible to install files via Makefile and
that always needed a corresponding update to FILES_{PN}-ledmanager.
Removing phosphor-led-manager-ledmanager will eliminate this problem.
Change-Id: I00ca4c34346a47f887872464b9050a46d8f5e8e9
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This commit adds below forward and reverse associations
"rType": "fault_inventory_object",
"fType": "fault_led_group"
"rType": "identify_inventory_object",
"fType": "identify_led_group"
Change-Id: Icaad89e6e690c3c0a635362e8c604874bc3f37fe
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This driver supports the TMP435 temperature sensor, which is used on 2
IBM manufactured PCIe cards, an NVME JBOF riser, and a PCIE gen 4 CXP
cable card. The former only plugs into Rainier, and the latter into
Rainier and Everest.
The TMP435 devices on these cards are powered by slot power, controlled
by the hypervisor, and so will not be accessible until the hypervisor
has started and has turned on slot power.
Note that the sensor instances for these cards will not be in the device
tree because they are monitored by the hwmontempsensors application
which gets its configuration information from the entity-manager
application. Entity-manager uses the 'new_device' API to instantiate
drivers, which does not need device tree entries. In fact, if these are
in the device tree, then the new_device write will fail even though the
device driver wasn't truly bound to that instance. As mentioned above,
because they are on slot power they cannot be probed as usual on kernel
startup.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I8aab28266f4e4b492c8d1c0c256714439ef1b5cd
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Tested:
- Booted up system with entity-manager loading rainier-1s4u config and
verified fan applications found and loaded new 1s4u files and system
was able to chassis power on.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I575a63edb242c1b94e1a6f1eafd86a96e4518e37
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I56ed73ee573df250072bd014a0e4c8a4072e974e
|
|
The 1s4u is just like the 2s4u except it has two less fans.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I35333e49c883fb9ac8c84223545fe3b903a66d7d
|
|
The 1s4u is just like the 2s4u except it has two less fans. Thermal
profiling may change some of the variable but for now just use the same
as the 2s4u.
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: Iab3fd9d1699de779c242bb42456d976697b4da14
|
|
For implementing kdump Witherspoon-Tacoma and Rainier kexec is needed.
This was done by pulling kexec-tools package into the build.
Tested: I successfully build each Witherspoon-Tacoma and Rainier
booted each in QEMU and manually verified kexec with no parameters
showed the version and help. Presently the kernel's SMP is missing
HOTPLUG so further testing of kexec utility is not possible.
Signed-off-by: Bruce Mitchell <Bruce.Mitchell@ibm.com>
Change-Id: I253dd3e0c46987070b5c252dcd5ab6008b3b09d3
|
|
This commit enables phosphor-ledmanager to do lamp test
Change-Id: I4933ec034911198f99ae1289f681f15057310c33
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This enables phosphor-ledmanager to use JSON configuration file
Change-Id: I3cbd0bf6b60e81f9f0a479ad51dab438c708c6c1
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
|
|
This layer provides libseccomp.
Signed-off-by: Anton D. Kachalov <gmouse@google.com>
Change-Id: I84513d56f2ed75fab49043196b98ef8b858e394f
|
|
- We have already made the change to make the snooping
port optional, which means that snoopd daemon can still
run and host the interfaces & Postcode Raw Value property
even on the systems with no snooping port.
- The intent behind this commit is to over ride the snoop-device
name to empty from the meta-ibm layer so that the snoopd daemon
will run without the support for snooping port on ibm machines.
Tested:
- Build images for witherspoon-tacoma & rainier, and made sure the
snoopd service runs without any issues.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I622a903f9084a9b94561c1202f8c637d30062112
|
|
For installing gendumpheader plugin, the recipe was including
all files from tools/dreport.d/ibm.d.
Corrected it to take only gendumpheader plugin so that it wont conflict
with installation of other plugins from same directory.
Signed-off-by: PriyangaRamasamy <priyanga24@in.ibm.com>
Change-Id: I5a1358f07aba6997cb9ae84dba59b3420c7ce968
|
|
The firmware code in these power supplies takes about 1500 milliseconds
to boot after they are inserted, and the presence line goes active.
Until the firmware has completely booted, the power supplies will not
respond to the I2C traffic initiated by the BMC device driver code as it
attempts to probe the hardware.
Adding in a DRIVER_BIND_DELAY_MS environment variable, set to 1500
(milliseconds), to delay the device driver binding in order to hold off
the probe until the power supply firmware should be ready, in order to
avoid ENXIO errors.
Change-Id: I101f8e3b7ff1c2c9e76df758c4551c7793006266
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
|
|
- The intent behind this commit is to pull the snooping daemon
into tacoma & rainier.
- This daemon is used for hosting the necessary dbus interface
& Raw Value property for the pldm to write the progress codes
into.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: I4730046a40345d74d53b19a5058e8e45d2d40e8f
|
|
The phosphor-inventory-manager application supports creating
associations based on JSON files, where the JSON files have conditions
built into them that say which inventory-manager property values are
required for the associations files to be valid.
Add minimal associations files for the Rainier 2U, Rainier 4U, and
Everest systems that just contain the fan inventory associations for
now. The condition is the 'IM' property on the com.ipzvpd.VSBP
interface on the system/chassis/motherboard path.
Change-Id: Ib6807d8982a2efeb94692b917804c53965d6c98a
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
|
|
Now that phosphor-fan-monitor starts at multi-user instead of the
fans-ready target, it needs a JSON config option to let it know when to
start monitoring after the fans have ramped up.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: If8eef303ee585dd30b3fbe9764a624eeab3b1a8a
|
|
Moved "inherit native" statements to the last position to remove QA Issues.
The message is: WARNING: QA Issue: {RECIPENAME}: native/nativesdk class is not
inherited last, this can result in unexpected behaviour. Classes inherited
after native/nativesdk: {CLASSFILES} [native-last]
Tested: The witherspoon image builds without the warnings.
Signed-off-by: Joseph Reynolds <joseph-reynolds@charter.net>
Change-Id: Ic3c71234abfcac8b26478bc32808e3bec8bba810
|
|
The feature was implemented as an append to the kernel (BSP) layers in
meta-phsophor. This created a three way dance between machine layers,
BSP and meta-phosphor, when it should have been the kernel layer
providing this feature and machines could then opt in.
Fixing this means we could remove the KERNEL_DANGLING_FEATURES_WARN_ONLY
workaround.
As the feature is simply turning on a pair of kernel options without any
other impact, we can implement it by adding the options to our
defconfigs. In fact, aspeed and hpe kernel configurations enable the two
kernel options:
$ git grep CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_KEYBOARD_GPIO=y
meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_KEYBOARD_GPIO=y
$ git grep CONFIG_INPUT_EVDEV
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_INPUT_EVDEV=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_INPUT_EVDEV=y
meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_INPUT_EVDEV=y
meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_INPUT_EVDEV=y
Other machines that wish to enable this feature should ensure it is
added to their BSP's defconfig, or add it to their machine specific
defconfig.
Change-Id: I0726836319022f96c1d13d4a0cbd73708047302c
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
- This commit would package the post-code-manager deamon
support for tacoma & rainier machines.
Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
Change-Id: Ieea0b1516419d8cde2b93126fb278ffa16f0c15d
|
|
Upstream recipe moved the disabling of deprecated crypto algorithms into
a new DEPRECATED_CRYPTO_FLAGS variable.
(Klaus: also adjust phosphor's EXTRA_OECONF for this package to not
double-disable already obsolete ciphers)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I75e2c35ada37c9510a0af347772cdeb2b23d99e9
Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
|
|
This application resides in the phosphor-fan-presence repo and creates
phosphor-logging based event logs for temperature threshold alarms.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Id5a7ce7590efe82eb1f9615853cabd58ac269c24
|
|
This will start phosphor-fan-presence at the multi-user target. It
doesn't need to know about the power state when just checking GPIOs and
tach sensors, so let it run all the time. It also avoids a race
condition with phosphor-fan-monitor if it starts earlier.
This commit also adds a JSON vs YAML packageconfig so service files can
be installed to different places based on how it is configured. And
since the service file has different contents based on when it starts,
the phosphor-fan-presence-tach@.service file was moved into the repo so
that the repo itself can determine which one to install based on how the
JSON vs YAML configuration option is set.
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I4c00f0854974c70efb5097d0344c45385dbcb085
|
|
This new phosphor-state-manager package allows a user to track the state
of their hypervisor firmware. This new software utilizes the
BootProgress property to determine the hypervisor state and relies on a
different software entity (for example PLDM) to monitor state requests
and send the appropriate messages to the hypervisor firmware.
Includes the autobump which has the new function:
phosphor-state-manager: srcrev bump 58477b5287..75f38ee42d
Andrew Geissler (3):
hypervisor: state management support
hypervisor: monitor boot progress
hypervisor: reset requested host state on power off
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I4c4bfc06db3b38b114c28692db808cffceff628a
|
|
This is the configuration that CI builds.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ib9b2ccc554f7ca2c602cec57a300416105791412
|
|
This distro feature is not used anywhere. Remove it to reduce
the clutter.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I1dd4e5ae52197a377b552a8a0e7d1e6d7e7ebe7f
|