Age | Commit message (Collapse) | Author | Files | Lines |
|
Creating Platform Event Logs from OpenBMC event logs has already been
enabled on other systems, and this commit enables it on
Witherspoon-tacoma.
(From meta-ibm rev: fb1595d74e96dd18d5f957bb53e12127f12932c9)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: Ie6be582c2ab417a3752ff43bf37330c6920fa297
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This commit fixes the inventory file used by openpower-vpd-parser
on Tacoma. Changes include:
* Fix the EEPROM path used to point to the right I2C bus.
* Fix the FRUs and OBJECTs that the file contains.
Tested:
Made sure that the right inventory file makes it to the image.
(From meta-ibm rev: f591790414025f25947b2327021e86d4d70709ab)
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Change-Id: I20852c9cc2aa6875673925c7588b335dc2ee29d0
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The commonly used target for Tacoma is to build obmc-phosphor-image.
(From meta-ibm rev: 2789e4e691624911c9f570a9451518f7947a4e9e)
Change-Id: Ie9e53df2127713cc467d85aafe2cd9f9aef2f7c5
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This configuration doesn't enable the rear uart.
There has been an issue when sending large amount of data from the VUART
-> obmc-console-server -> UART that is still under investigation. The
rear uart is not used for development, so it can be disabled for now.
(From meta-ibm rev: e3befcfc5e7e89bba7eba316c01e2b93001029a4)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Change-Id: Ib3ec92572fd8551a3d6db39616b016730edf5612
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Set the configuration file to phosphor-cooling-type to set all
witherspoon tacomas to be air cooled only.
Tested:
Removed DEVICE & CODE on witherspoon config to see always be set to
air cooled
Updated config on witherspoon tacoma and restarted service to see
always be set to air cooled
(From meta-ibm rev: 373d3485c500ee8d3d07f2f68d0fec896856c374)
Change-Id: I1bf483da9580c4fd4b833da5840a0a98e691a811
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Add PLDM based host dump offload support for Witherspoon-128,
Rainier and Witherspoon-tacoma.
(From meta-ibm rev: 2350054c62b5783cb49fd12671cb70809be4e573)
Signed-off-by: Dhruvaraj Subhashchandran <dhruvaraj@in.ibm.com>
Change-Id: Idf26b5cc66860553db651f90b57cd0ac0b7cfd9f
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: c01884719907cf567e748bb00d6ebf3c13dbb1db)
Signed-off-by: Sunitha Harish <sunithaharish04@gmail.com>
Change-Id: I0c42518e03f06d06baec4a03095180e71508c065
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
We want to make mihawk's led names the same as witherspoon.
(From meta-ibm rev: dfef3e04755e7be5dad40dc7d0cb064372b49694)
Change-Id: I60cc8b17df0956a230e1a2824f4a3e247f5a4624
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
(From meta-ibm rev: 04925b9f4076932f319fa62114526ce8fa709829)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I63a166b85792ed9192f5185847e03e8fe59a3a85
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
phosphor-power recipe is splitted into separated packages.
In packagegroup-obmc-apps.bbappend, define
POWER_SERVICE_PACKAGES_AC_SERVER to include the packages for IBM AC
servers and POWER_SERVICE_PACKAGES_RAINIER for rainier server.
The package cold-redundancy is not included yet because the repo does
not install the files yet.
In phosphor-power bbappend, use separated packages as well.
It also add phosphor-power to install the psu.json in witherspoon's
phosphor-power bbappend, which is needed for multiple packages.
Tested: Verify all the ac-server services and utils are installed into
Witherspoon's image as before.
(From meta-ibm rev: 438174de3490d800181ecd26ac162c6ebe442194)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: I76808e92de7cf144ba2a3b7a455af582eaad3d33
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This selects the ast2600 openbmc u-boot configuration and the tacoma
device tree.
(From meta-ibm rev: b36b9ebc7f25a7d86d5c0e1cec81f156633921bd)
Change-Id: I079fc3d82ae1a453719923c743f58dd2c529968d
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
This selects the ast2600 openbmc u-boot configuration and the rainier
device tree.
(From meta-ibm rev: d3ed8678c77cd88a1953721b053f4fc6c1918fd1)
Change-Id: Id97193d6f19e5e6b7e796880d13976417e79f92c
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Build an ext4 rootfs image for tacoma to be used in its eMMC chip.
(From meta-ibm rev: 211b39b9b2de6bf558c03b9cf92824d3408a52b9)
Change-Id: I45d6435b7caf7e3f28fc6a8a47a40bc62e96fb20
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Rainier plans on using the refactored power supply monitoring
application. Add that package to Rainier by appending it to the list.
(From meta-ibm rev: 11e5638b1df8c10c5cde5ab605410b5d6a7c3eab)
Depends-On: I3c1aa4f0daac6a85bb60fc775a5c48dbf3ea203b
Change-Id: I035f2687539ae1f7d57d07ee8efc0d3b2b6b1eff
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
The GPIO lines for the power supplies changed from Witherspoon to
Witherspoon-Tacoma. The power supply presence lines are GPIOH3 and
GPIOE5 (key 59 and 37). The power supply input history sync is on
GPIOE6 (38).
Tested:
witherspoon-tacoma 2.8.0-dev-1205-g01aee77e4 chassison fails
Flash custom image with these changes
witherspoon-tacoma 2.8.0-dev-1272-g22036b442 chassison succeeds
(From meta-ibm rev: e023c109f4a53212ee8ea880a82dd7f0432b8f1c)
Change-Id: I0cf1afa738036c5cceb13a9df85c23ff660b97be
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
|
|
Fan control must support NVMe SSD thermal sensor.
Tested: Fan speed is automatically controlled when using NVMe SSD
(From meta-ibm rev: 4dc75c91139e71ee5f42ba27ddacf46815c8aa8b)
Change-Id: Idb156ebe12d98b26faa7781b462e11b38af5ae7c
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update to Version 1.8.5 for mihawk
(From meta-ibm rev: bf39d8f7981252cf0a56f75fd7e5533a828ceb08)
Change-Id: Ief4321ca06d729b6b735532c1a03265c63ab0d5d
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Added the BMC inventory for mihawk.
(From meta-ibm rev: 95efbf1fdb48951294a3832137d4c1a56fcab3a2)
Change-Id: I3478e33ce305324d2041e69d79d8873585cae23d
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This commit enables the configure option "enable-ibm-dbus-interfaces"
for phosphor-dbus-interfaces build to pull in all com.ibm.*
interfaces.
Tested:
Bitbaked to ensure the right configure options are passed.
(From meta-ibm rev: 8a2fdae730a41fb96887b6d404679800a9f74c8d)
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Change-Id: I788ad7ce6e4e92567176f6dda235f6689d577260
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Enable the use of JSON and install the fan presence JSON config file
into the witherspoon image. The other fan applications will continue to
use their respective YAML build time config file(s).
Tested:
Built witherspoon image, uses JSON config
Built mihawk image, continues to use YAML
(From meta-ibm rev: a6817ca6ca8c87a10eb325835ba4db59109f6101)
Change-Id: I1b675e8a3b064b04007d7474d12e5d5ad2094dad
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
JSON config file representing the same configuration that is given as
YAML at build time.
(From meta-ibm rev: 7e31e7a23d51757132e4d74873a16c65f2a1400b)
Change-Id: I8cb2697d93d402bb66f5967cba913e071a16f6b7
Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently mihawk is missing information about dev id.
(From meta-ibm rev: 28bafefc05285df52eab617ea2158b3886dc93a8)
Change-Id: I02b138a1830e0c4627c70b338d31cb7dbaa2d75c
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This will be used so that during manufacturing test the PEL (Platform
Event Log) code that runs inside phosphor-log-manager can be told not to
send PELs to the host as that is not desired in some cases.
The D-Bus path is: /xyz/openbmc_project/logging/send_event_logs_to_host
and it uses the xyz.openbmc_project.Object.Enable interface that
provides an Enabled property. The default value is Enabled = true.
(From meta-ibm rev: 42cd2d857eb1d1c4ae6fdd8c9ee6c3c8de5ef7a0)
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Change-Id: I9cab4f1c1efdda3a6d3f6f38f7c3e19690f452c2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Support to set the value for ClearSecurityKeys property which can be used to
indicate when certain security keys need to be cleared or reset those values
back to its default state from the system by the host. This property is mapped
to an IPMI sensor and default value will be zero. Setting this property does
not gurantee a successful operation as additional conditions like the physical
presence pin or jumper settings will be checked by the host to clear/reset the
sensitive data.
Tested: Verified that the property is getting created with the expected
default value as zero and can be updated to different values using ipmitool
or busctl command.
1. Default value output:
busctl get-property xyz.openbmc_project.Settings
/org/open_power/control/host0/ClearHostSecurityKeys
org.open_power.Control.TPM.SecurityKeys ClearHostSecurityKeys
y 0
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
00 40 00 00
2. Set to a new value as 5 using busctl command:
busctl set-property xyz.openbmc_project.Settings
/org/open_power/control/host0/ClearHostSecurityKeys
org.open_power.Control.TPM.SecurityKeys ClearHostSecurityKeys y 5
3. After setting to a new value as 5:
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
05 40 00 00
4. ipmitool command to set the value as 4
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x30 0xE8
0x00 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x2D 0xE8
09 40 00 00
5. Invalid value test o/p:
ipmitool -I lanplus -H 9.3.185.33 -U root -P 0penBmc raw 0x04 0x30 0xE8
0x00 0x12C 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Given data "0x12C" is invalid.
(From meta-ibm rev: 81a9143100d5d4a7d97350afa1794be694d45590)
Signed-off-by: Jayashankar Padath <jayashankar.padath@in.ibm.com>
Change-Id: I9e12b6e5abb3a9b198921847605a74b771fd9945
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tacoma was missing the OBMC_POWER_SUPPLY_INSTANCES config, and thus the
power supply monitor service will not start correctly.
And with the change in
https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/27463
the build will fail on constructing the rootfs.
Fix it by adding OBMC_POWER_SUPPLY_INSTANCES in tacoma config.
(From meta-ibm rev: 1f2b96d73f0117b9c07ce7e4beca0e1dfddfb8e2)
Change-Id: I20f1ca81642bb1d594aa783ca3872b6bd08720da
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
HW CI on Palmetto trigers two issues:
1. The case to verify occ active fails because it was using the last
character of `cpux` for occ, e.g. cpu0 -> occ0.
Palmetto had an incorrect inventory path of `cpu`, which results in
`occu`, and it becomes an incorrect path, and the case gets a 404
error while trying to get the OCC active state.
2. The case to get https://$bmc/ fails, it's expecting HTTP 200 OK
resonse, but got a 401 error. This is because webui is not built into
Palmetto, so there is no page, and bmcweb returns 401 for such case.
Fix the above cases.
Tested: Verify the HW CI succeeds on Palmetto:
python3 -m robot -v OPENBMC_HOST:palmetto --argumentfile \
test_lists/HW_CI --exclude Verify_Redfish_Host_PowerOn --include \
Verify_Redfish_Host_PowerOn_No_Check_Watts redfish tests
(From meta-ibm rev: 4ac52cb28db30f89bdfd23ab1614f71b65dfdceb)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: Ifd102f167cfa4d83769fb055b883e4c214a27b9a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The yaml add the "xyz.openbmc_project.Inventory.Item.Chassis" interface
to "/xyz/openbmc_project/inventory/system/chassis" object.
This is needed for bmcweb to correctly get the chassis id in
/redfish/v1/Chassis/.
Tested: Verify that /redfish/v1/Chassis/chassis exists on Palmetto with
this change. It was 404 without this change.
(From meta-ibm rev: 5930fdcc620b5ab65418b748b3cc0db465dc05fb)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: I67d5458d4540feacc67bd558dabb642b377f508b
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The yaml add the "xyz.openbmc_project.Inventory.Item.Chassis" interface
to "/xyz/openbmc_project/inventory/system/chassis" object.
This is needed for bmcweb to correctly get the chassis id in
/redfish/v1/Chassis/.
Tested: Verify that /redfish/v1/Chassis/chassis exists on Romulus with
this change. It was 404 without this change.
(From meta-ibm rev: 41b829feead473e5541f7d4c3c075e2b1a525c45)
Signed-off-by: Lei YU <mine260309@gmail.com>
Change-Id: Ie091ad32315fb4b4e45d8b35966a7a238dd1d539
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently avsbus-disable will be executed after power_up to 1.
We found that this will cause power on fail, so avsbus-disable should
be performed before power on.
(From meta-ibm rev: c569a42895ac035837f1508d14903cfea3c5a675)
Change-Id: Ib08573efbb1abf510b2683afd31cd74db9f66a2b
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Reviewing GPIO function with engineering, BMC_DCM_ALL_RESET_N GPIO
should be handled differently. Remove BMC_DCM_ALL_RESET_N from Rainier
power-on GPIO configuration.
(From meta-ibm rev: de595e38e6c38729d7e0c7eb6925fe639cbb5b85)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I2fa2949b49d192b0a3a6a516c3ce9c49052dd3d7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The power-supply-monitor configs were installed by
SYSTEMD_ENVIRONMENT_FILE_${PN}, which is defined in
obmc-phosphor-systemd.bbclass.
phosphor-power recipe does not inherit obmc-phosphor-systemd, results in
the files installed by SYSTEMD_ENVIRONMENT_FILE_${PN} are not installed
at all.
Fix this issue by inherit obmc-phosphor-systemd in the bbappend.
Tested: Verify the witherspoon build includes the power-supply-monitor
configs.
(From meta-ibm rev: d4374bf93e5927ccadb9de954384096ffb8590ec)
Change-Id: Iaa3a04694c7b591d349a32529a0afef16239203d
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Although 6 fanx_1 pwm targets are deleted, but fan0_1 fan1_1 and fan2_1
will have a default value that causes the issue to remain unresolved.
In this way, two Fans control the same pwm, but I think that our
current fan control event is controlled at the same time, so it does
not affect the fan control.
(From meta-ibm rev: c4ec0f10a091fe74f075d2033fe055b5bbd7d498)
Change-Id: I42647c92ffe5e20430cee28de6fd26e2716153d9
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Set warning and critical values for PSU.
(From meta-ibm rev: 1b9796d85dd41e8675d0d03132cbff8dd74a1d47)
Change-Id: Ie16955f7548e9e6fa54cea2aff767a164abb76f3
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add led fault event, fault led will turn on when cpu or dimm or other
components fail
(From meta-ibm rev: f0aaa6f39f61366a6599d1e571f1eada4bf93b1c)
Change-Id: Ifdd49dab35d915cb7d9ff095e6571fba42801bba
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Mihawk's GPU temperature exceeds 92 degrees Celcius should be shutsown
to avoid GPU damage.
Tested:
GPU temperature exceeds 92 degrees Celcius system will shutdown.
(From meta-ibm rev: 623eb4dda626dd3dfb3f14d9afa4e10c86d3bbca)
Change-Id: Id085afa2a7d7a29a42cd5d508a03fb64dd53c108
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Currently power sensor might get the wrong channel.
We have to modify it to the correct channel.
Tested:
Check sensot list user can see the correct power sensor.
(From meta-ibm rev: aaceadff166052bef63b860063ccbda66d918629)
Change-Id: I2595c727915b8e72af4f56e5383efb183e9b3638
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fan speed can be increased when occ or ambient is abnormal, so add the
monitor of the ambient and OCC control services.
(From meta-ibm rev: d0a123bdd618570e585a4020593bf9b13395398d)
Change-Id: I17eb679760c2e6f6002f5ea54f7d799f1c62680c
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
According to our thermal team test report, we need to adjust the fan
control event.
Tested
Fan speed will be based on new fan control events.
(From meta-ibm rev: f242630e5a8195eeef089f01537b9be4fde000a2)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: Ib4c296f128d625e78387cead26c46c76faa39535
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
We think fan is a necessary sensor in ipmi sensor list.
Tested: Use ipmitool sdr to check it.
(From meta-ibm rev: 5bdc8591ac5e6ce708fdc0788806cb89452c3b14)
Change-Id: I87acef1dcfe11bc532eac5412375133b56f40320
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
1. According to the thermal team test results, the cpu core should be
shutdown when it exceeds 95 degrees Celcius.
2.mihawk's ambient temperature exceeds 45 degrees Celcius should be
shutsown to avoid system damage.
Tested:
Cpu core exceeds 95 degrees Celcius or ambient exceeds 45 degrees
Celcius system will shutdown.
(From meta-ibm rev: 7f94a4b3a7c3d7346ae4b1bade6287ea1a70c41a)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I303a5047dc0b29e46829f4b838eaa6f151b13735
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Mihawk Every fan has two rotors but one of the rotors gets the wrong
fan pwm via REST command, so remove fanx_1 target.
Tested: Use command "curl -k -X GET https://root:0penBmc@<ip>/xyz/
openbmc_project/sensors/fan_tach/fan0_0"
This can show the correct pwm.
(From meta-ibm rev: 31a8e8430b5f2629249f80de7eb91b598fa6caca)
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Change-Id: I68e40fefdc15a7580ca819084929813dae5d43a5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Matt Spinler (1):
Updates for new association interface
(From meta-ibm rev: 19ce1444820160d3024e292e7863c9601508714a)
Change-Id: If1ab86647f0b8b90d72398d929e67cf16eaff1cc
Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
There isn't much content here and there hasn't been any activity in this
layer since it was added over a year ago. Drop from the tree.
(From meta-ibm rev: cff4a62a4f634cd6b0107a48ee631346c2246f33)
Change-Id: I32b8c0b965c6e12023329f490989ec1ecd7c966f
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The workarounds script does some unbinding and rebinding of the ucd
driver so ensure all of this is done before power is considered
officially on. Other services start after the power on target completes
and they depend on the ucd driver being bound and available.
Tested:
Verified on a system that was failing due to this issue now powers on
(From meta-ibm rev: b95b2f401bd37e0257c50d781e528d00962bbe0f)
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I62219e15834506b9935c3a42431d991e3555e64c
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add pldm to witherspoon system and install configs.
(From meta-ibm rev: 6f22923fcae11a46e1c21ac5eba23590d632ed7f)
Signed-off-by: Deepak Kodihalli <dkodihal@in.ibm.com>
Change-Id: I47cfd20eee48afaf4cf985678a0177044852372d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
When Rainier was removed from AC server builds, the phosphor-power
repository was dropped from the image. Add phosphor-power to Rainer
builds.
(From meta-ibm rev: 5bbf75e279cfd7d3cf77b8d49c69fe338f97ee72)
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I9c0105396d9b50d65abc2338eab46ae84bee209e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
phosphor-power recipe is added in meta-phosphor, replace
witherspoon-pfault-analysis with phosphor-power.
Add "psuDevices" in psu.json for witherspoon and swift.
Tested: Verify witherspoon build is OK, the phosphor-power related
binaries and the services are installed correctly.
(From meta-ibm rev: 9422171d261d155b903295cd7c0c5aedbab535a0)
Change-Id: I2706ac9e9bff11b943ae6861bebd67e67d0bee15
Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Update rainier.conf to indicate the four power supply instances.
Update bbappend for Rainier SYSTEMD_LINK and SYSTEMD_ENVIRONMENT_FILE.
Add in subdirectory and power supply configuration files for GPIO
presence detect of the Rainier power supplies.
Use aspeed-gpio.sh from https://github.com/bradbishop/gpio-keys to
determine gpio-key values. Use 7-bit I2C addresses on BMC.
+-----+--------+----------+----+
| PSU | GPIO | gpio-key | AA |
+-----+--------+----------+----+
| ps0 | GPIOS0 | 144 | 68 |
+-----+--------+----------+----+
| ps1 | GPIOS1 | 145 | 69 |
+-----+--------+----------+----+
| ps2 | GPIOS2 | 146 | 6a |
+-----+--------+----------+----+
| ps3 | GPIOS3 | 147 | 6b |
+-----+--------+----------+----+
(From meta-ibm rev: 3e8f174546cf440fda56ce47523030d4d403edbd)
Change-Id: Ia55f80e4d857e7a477385d73c12f9719e3065f95
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
1.Correct the channel of mihawk total power sensor
2.The current mihawk is not used to external gpu power.
Avoid confusing users so delete this sensor.
(From meta-ibm rev: e65b464ca953a0d1a7db93598956db6aa2d306b9)
Change-Id: Ib4dee8181376d848364c9e92b2b5d2e67ec1fc17
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Base hardware enablement support for meta-palmetto is provided by
meta-palmetto and meta-openpower. meta-ibm adds advanced serviceability
functions for IBM branded products backed by the IBM service structure.
Palmetto is a reference platform for ODMs and/or OEMS building POWER8
based systems. End users cannot purchase support contracts for Palmetto
systems. As such remove meta-ibm from the build configuration in the
spirit of keeping the reference implementation mini and simplified.
At a functional level this removes the ibm-logging application from
images.
Note that meta-ibm can always be re-integrated by simply adding it to
bblayers.conf
(From meta-ibm rev: 37a17426e42ecfc843e757732b01a81212a109e7)
Change-Id: Ic0ea8778b249ae14f21093157793c046e2c1de81
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|