summaryrefslogtreecommitdiff
path: root/meta-ibm
AgeCommit message (Collapse)AuthorFilesLines
2021-03-09Correction in debug-collector recipePriyangaRamasamy1-1/+1
For installing gendumpheader plugin, the recipe was including all files from tools/dreport.d/ibm.d. Corrected it to take only gendumpheader plugin so that it wont conflict with installation of other plugins from same directory. Signed-off-by: PriyangaRamasamy <priyanga24@in.ibm.com> Change-Id: I5a1358f07aba6997cb9ae84dba59b3420c7ce968
2021-03-09Rainier: Add a presence to bind delay of 1500msBrandon Wyman4-0/+4
The firmware code in these power supplies takes about 1500 milliseconds to boot after they are inserted, and the presence line goes active. Until the firmware has completely booted, the power supplies will not respond to the I2C traffic initiated by the BMC device driver code as it attempts to probe the hardware. Adding in a DRIVER_BIND_DELAY_MS environment variable, set to 1500 (milliseconds), to delay the device driver binding in order to hold off the probe until the power supply firmware should be ready, in order to avoid ENXIO errors. Change-Id: I101f8e3b7ff1c2c9e76df758c4551c7793006266 Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
2021-03-09Package phosphor-host-postd for tacoma & rainierManojkiran Eda1-2/+2
- The intent behind this commit is to pull the snooping daemon into tacoma & rainier. - This daemon is used for hosting the necessary dbus interface & Raw Value property for the pldm to write the progress codes into. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Change-Id: I4730046a40345d74d53b19a5058e8e45d2d40e8f
2021-03-03rainier: Add inventory associations JSON filesMatt Spinler4-2/+425
The phosphor-inventory-manager application supports creating associations based on JSON files, where the JSON files have conditions built into them that say which inventory-manager property values are required for the associations files to be valid. Add minimal associations files for the Rainier 2U, Rainier 4U, and Everest systems that just contain the fan inventory associations for now. The condition is the 'IM' property on the com.ipzvpd.VSBP interface on the system/chassis/motherboard path. Change-Id: Ib6807d8982a2efeb94692b917804c53965d6c98a Signed-off-by: Matt Spinler <spinler@us.ibm.com>
2021-03-02wspoon: Add fan monitor start delayMatt Spinler1-0/+4
Now that phosphor-fan-monitor starts at multi-user instead of the fans-ready target, it needs a JSON config option to let it know when to start monitoring after the fans have ramped up. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: If8eef303ee585dd30b3fbe9764a624eeab3b1a8a
2021-03-02native class is not inherited lastJoseph Reynolds4-4/+4
Moved "inherit native" statements to the last position to remove QA Issues. The message is: WARNING: QA Issue: {RECIPENAME}: native/nativesdk class is not inherited last, this can result in unexpected behaviour. Classes inherited after native/nativesdk: {CLASSFILES} [native-last] Tested: The witherspoon image builds without the warnings. Signed-off-by: Joseph Reynolds <joseph-reynolds@charter.net> Change-Id: Ic3c71234abfcac8b26478bc32808e3bec8bba810
2021-03-01Remove phsophor-gpio-keys as a standalone featureJoel Stanley1-1/+0
The feature was implemented as an append to the kernel (BSP) layers in meta-phsophor. This created a three way dance between machine layers, BSP and meta-phosphor, when it should have been the kernel layer providing this feature and machines could then opt in. Fixing this means we could remove the KERNEL_DANGLING_FEATURES_WARN_ONLY workaround. As the feature is simply turning on a pair of kernel options without any other impact, we can implement it by adding the options to our defconfigs. In fact, aspeed and hpe kernel configurations enable the two kernel options: $ git grep CONFIG_KEYBOARD_GPIO=y meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_KEYBOARD_GPIO=y meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_KEYBOARD_GPIO=y meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_KEYBOARD_GPIO=y meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_KEYBOARD_GPIO=y $ git grep CONFIG_INPUT_EVDEV meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g4/defconfig:CONFIG_INPUT_EVDEV=y meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g5/defconfig:CONFIG_INPUT_EVDEV=y meta-aspeed/recipes-kernel/linux/linux-aspeed/aspeed-g6/defconfig:CONFIG_INPUT_EVDEV=y meta-hpe/meta-gxp/recipes-kernel/linux/linux-obmc/defconfig:CONFIG_INPUT_EVDEV=y Other machines that wish to enable this feature should ensure it is added to their BSP's defconfig, or add it to their machine specific defconfig. Change-Id: I0726836319022f96c1d13d4a0cbd73708047302c Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-26Package post-code-manager for rainier & tacomaManojkiran Eda1-2/+2
- This commit would package the post-code-manager deamon support for tacoma & rainier machines. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Change-Id: Ieea0b1516419d8cde2b93126fb278ffa16f0c15d
2021-02-25openssl: move to DEPRECATED_CRYPTO_FLAGSAndrew Geissler1-2/+2
Upstream recipe moved the disabling of deprecated crypto algorithms into a new DEPRECATED_CRYPTO_FLAGS variable. (Klaus: also adjust phosphor's EXTRA_OECONF for this package to not double-disable already obsolete ciphers) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I75e2c35ada37c9510a0af347772cdeb2b23d99e9 Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com>
2021-02-25ibm: Install sensor-monitor on rainierMatt Spinler2-2/+3
This application resides in the phosphor-fan-presence repo and creates phosphor-logging based event logs for temperature threshold alarms. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: Id5a7ce7590efe82eb1f9615853cabd58ac269c24
2021-02-25ibm: Start phosphor-fan-presence at multi-userMatt Spinler1-2/+3
This will start phosphor-fan-presence at the multi-user target. It doesn't need to know about the power state when just checking GPIOs and tach sensors, so let it run all the time. It also avoids a race condition with phosphor-fan-monitor if it starts earlier. This commit also adds a JSON vs YAML packageconfig so service files can be installed to different places based on how it is configured. And since the service file has different contents based on when it starts, the phosphor-fan-presence-tach@.service file was moved into the repo so that the repo itself can determine which one to install based on how the JSON vs YAML configuration option is set. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: I4c00f0854974c70efb5097d0344c45385dbcb085
2021-02-25hypervisor: introduce new package for state managerAndrew Geissler1-0/+5
This new phosphor-state-manager package allows a user to track the state of their hypervisor firmware. This new software utilizes the BootProgress property to determine the hypervisor state and relies on a different software entity (for example PLDM) to monitor state requests and send the appropriate messages to the hypervisor firmware. Includes the autobump which has the new function: phosphor-state-manager: srcrev bump 58477b5287..75f38ee42d Andrew Geissler (3): hypervisor: state management support hypervisor: monitor boot progress hypervisor: reset requested host state on power off Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I4c4bfc06db3b38b114c28692db808cffceff628a
2021-02-25meta-ibm: Add rainier to example build invocationsJoel Stanley1-0/+2
This is the configuration that CI builds. Signed-off-by: Joel Stanley <joel@jms.id.au> Change-Id: Ib9b2ccc554f7ca2c602cec57a300416105791412
2021-02-23phosphor-tiny: remove distro settingPatrick Williams1-1/+0
This distro feature is not used anywhere. Remove it to reduce the clutter. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I1dd4e5ae52197a377b552a8a0e7d1e6d7e7ebe7f
2021-02-20romulus: remove empty distro indirectionPatrick Williams2-3/+2
Most openpower machines use DISTRO="openbmc-openpower" but Romulus has a "openbmc-romulus" distro config file. This config file has nothing except an inclusion of the openpower one, so remove this useless indirection. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I371ce4137369e4964eed1529f8a8190e31721ecc
2021-02-19meta-ibm:everest: Remove inlet rotors from trust groupsMatthew Barth1-16/+0
Fan monitoring should not need the inlet rotors included in the nonzero speed trust group. This causes the nonfunctional timer to start for these rotors and immediately stop since they are never actually taken into account in the determination of trust. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: I411faab9dcd67fa2409f6be39be54969a0eb2520
2021-02-19meta-ibm:rainier-2u: Remove inlet rotors from trust groupsMatthew Barth1-24/+0
Fan monitoring should not need the inlet rotors included in the nonzero speed trust group. This causes the nonfunctional timer to start for these rotors and immediately stop since they are never actually taken into account in the determination of trust. Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: I043f1003319e84e3c93b59f80963525d9d7d4eac
2021-02-16Remove bios configurations from meta-layer & bumpManojkiran Eda5-108/+1
- The intent behind this commit is to enable & set OEM specific options to pldm recipe via the meta-ibm layer. - pldm in its current state, has a configurations folder which contains all the configurations that are consumed by the daemon at runtime. - pldm also has an oem folder(s) that can contain the vendor specific configuration files. - So, removing these files from the meta-layer as they are obsolete. Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Change-Id: I91d23c37abff45f3da18676269be843610b6a9d1
2021-02-10sched-host-tran: enable in ibm imagesAndrew Geissler1-0/+5
The plan on IBM systems is that the host software will communicate via PLDM which will utilize the D-Bus properties provided by this function. Note that the new D-Bus interfaces provided by this function could also be supported via Redfish. The PowerOnDelaySeconds and PowerOffDelaySeconds properties within the ComputerSystem object would map to what's provided here. There are no plans currently to do this though as IBM's only use case is controlling this function via the in-band PLDM interface. Tested: - Verified the generated image had scheduling service and function worked as expected scheduling a power on then power off Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I781dfba0871853feafed49faa72bf1c05f657d85
2021-02-04mpreboot: add to rainier and tacoma systemsAndrew Geissler2-0/+2
Both rainier and witherspoon-tacoma systems support the mpreboot feature. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Ieeb4724a5cf5678ba0f6ab950b5403db5aebcd88
2021-02-04mpreboot: introduce new distro featureAndrew Geissler1-0/+3
The memory preserving reboot is a feature utilized on IBM systems which allows a system to be rebooted with its memory preserved. This is utilized in situations where the host firmware has crashed and put the processor in an unusable state. The processors are put back in a good state by rebooting the system. Memory is preserved though so host firmware can capture the relevant data from memory needed to debug the cause of the failure. This feature is implemented across a few different repositories within OpenBMC so lets create a distro feature to enable it across all of the software stacks. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Ia16626ba6e46aa8de642abef677735ed957f9f9e
2021-01-31meta-phosphor: Add ibmtpm2tss recipe to rainier and witherspoon-tacomaKlaus Heinrich Kiwi2-1/+6
The ibmtpm2tss tools are required to use the Nuvoton NPCT750A TPM from userland. The ibmtpm2tss package also required OpenSSL camellia support, so remove the override disabling that for those two machines. Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Change-Id: Ifc0afc58f4a31ea4b6d1750d470738d0d0e82754
2021-01-31meta-ibm: Add meta-security layerKlaus Heinrich Kiwi1-0/+2
There are some machines (Witherspoon-Tacoma and Rainier) that have a TPM device, which will be used eventually. We need access to the recipes in this layer. Signed-off-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Change-Id: I3b10ee4d39a69e651a790ae3238e39c45e21ce72
2021-01-29Package biosconfig-manager for rainier & TacomaManojkiran Eda1-2/+2
- This commit would package the biosconfig-manager for both tacoma & rainier machines. Tested By : - With the changes booted the tacoma machine & observed that the biosconfig-manager services are up & runnning Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com> Change-Id: I90542368a70284c97e1f33d29770c751a61631ca
2021-01-28pldm: Add squashfs-toolsAdriana Kobylak1-3/+2
The squashfs tools are used by PLDM during inband update. Reference: https://gerrit.openbmc-project.xyz/c/openbmc/pldm/+/37510 Tested: Verified that the rootfs/usr/sbin/mksquashfs existed. Change-Id: Id8d00765e72ce04bc8f039403a570aa7dca98b26 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
2021-01-28meta-ibm: Use fan-monitor for fan errorsMatt Spinler4-3/+123
Instead of using phosphor-dbus-monitor to create errors and handle power offs for fan errors, use phosphor-fan-monitor instead, now that it has the functionality. To do this, add the new rules to the fan monitor config files, and remove the phosphor-dbus-monitor fan rules files. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: Ia03186132f04087be76d2fd43412c37698407f60
2021-01-28phosphor-ipmi-config: Handle an empty commit numberAdriana Kobylak1-3/+7
The VERSION_ID may not have a commit number for the cases a tag is created, ex: 2.10.1. Since the code is expecting a commit number of 1-4 digits, use a '0' if no commit number exists. Tested: Created a tag 2.10.99 which sets VERSION_ID=2.10.99. Without this change, build fails with: "Exception: IndexError: list index out of range" With this change there are no build errors. Change-Id: I3b56ebc1844ec6748b92cca3484f9aa1f4d983f8 Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
2021-01-28add geissonator as maintainer to ibm layersAndrew Geissler2-0/+2
I've been utilizing my gerrit admin abilities to merge autobumps and backup Brad in these meta layers. The OWNERS plugin disabled this path for me. My intention is to keep with this same workflow. I'll merge autobumps and backup Brad as needed. Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: Ib248c6122644dbbd4b024ed07eb7259db85daf1e
2021-01-13meta-ibm: Update notes file to be clearerRashmica Gupta1-1/+1
(From meta-ibm rev: c203fa3d1ca3de7d61b3c06a22dbf4385202cc78) Change-Id: Iab1adeab9ff493e05e26f31f72c9cb708f28e73e Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12Add Owners Plugin to meta-ibmEd Tanous1-0/+2
Please see https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/39379 for details about why this is necessary. (From meta-ibm rev: 501f9fd6b63c8b11c0ae0f6268a98c33b764caa0) Signed-off-by: Ed Tanous <ed@tanous.net> Change-Id: I05862abb52f7fac1bcf4fdd939a1101aa2431f9d Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12gpio-presence: wants relationship with multi-userAndrew Geissler1-1/+1
The rule of thumb within OpenBMC is to utilize a wants relationship with targets, especially the multi-user.target. This follows the general design of always allowing the system to continue whenever possible. For example I'm doing some bringup in simulation where these services are not required, but their failure is impacting my ability to reach a successful multi-user.target state which impacts other targets that depend on it. Tested: - Verified multi-user.target completes successfully now on my bringup system (From meta-ibm rev: f2f6d38efdfa1a88a5f41b9871e0d3aa76f193d1) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I687fbbb7006a3d9b9abe1d308802914d64224410 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12rainier: Add max31785 hwmon device for EverestMatthew Barth2-0/+18
Everest has the max31785 at a different i2c address that is behind a mux, so install its hwmon config at that associated location. Tested: Hwmon instance for the max31785 starts successfully on Everest (From meta-ibm rev: cd84eb53a79edcabddd5e7720f9e0389f4e96151) Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: Ide9ca8bd76d708ef9453dc7d02526dfbb1dd8a30 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12Update packagegroup for RainierBrandon Wyman1-1/+5
Rainier does not need/want the old PSU monitor. (From meta-ibm rev: eba91da180e9ec5b7260aebb87fb05ab1e48c930) Change-Id: I6c9e58257cd7a8b3a675b69ae3d88603a8fb0e94 Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12rainier: Re-add fan presence gpios on EverestMatthew Barth1-0/+24
Corrected the gpio pins and paths for detecting fans wired to a PCA9552 behind a mux according to the Everest schematics. Fan presence will fail to access these gpios until the Everest dts is updated to expose them. (From meta-ibm rev: 072949a9b84112572559baa76d12b9a7c77f8547) Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: I9456ff8bd4298f3414f41180732e8e17b738acfa Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12rainier: Remove fan presence gpios on EverestMatthew Barth1-24/+0
Temporarily remove detecting fan presence by gpio on Everest until the gpios are added within the dts and accessible in userspace. (From meta-ibm rev: 7c4944f2dfd2ce5ab811f7e07a5a4d8de5949ee4) Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: I62f80e494a9d0feffa45cc3a1e08f0a859fca35b Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-12rainier: Fix Everest fan monitor configMatthew Barth1-4/+4
Remove extraneous commas from the Everest fan monitor JSON config so it can be loaded/parsed. (From meta-ibm rev: 84d05fda258fbd02650d859f6fe9a77a6e5ef7a6) Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Change-Id: Ib0b044f8657593137d67cec036ab615e265398e3 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2021-01-05remove ldap on witherspoonAndrew Geissler1-0/+3
openbmc master has exceeded the available flash space on witherspoon. Remove LDAP so it fits again and we can continue to use witherspoon for HW CI validation of openbmc master commits. IBM has forked off its own openbmc repo for maintenance of customer witherspoon systems. Therefore it is not necessary for openbmc master to continue to support everything. Tested: - Verified generated image flashes on witherspoon and HW CI tests passed - obmc-phosphor-image-witherspoon.squashfs-xz 19.27MB -> 18.53MB (From meta-ibm rev: 6390f0999f00b1cdfe19daf2d7e8868c25808497) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I39b5d785919bdcd54b6bcf04217439050442f119 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-17dump: Used renamed build optionRamesh Iyyar1-2/+2
The phosphor-debug-collector renamed "host-dump-offload-transport" build option into "host-transport" to make generic for supporting other host dump action (i.e create,delete) not only offload so, changed build option here as well based on phosphor-debug-collector. phosphor-debug-collector patch: https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-debug-collector/+/38792 (From meta-ibm rev: eb951216a95e360431644dba46f04fc0541fb608) Signed-off-by: Ramesh Iyyar <rameshi1@in.ibm.com> Change-Id: I4466896b67cb7490b13e6c32113bb59651fbcdb3 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15LEDS: Add systemd unit to call led-set-all-groups-asserted.shVishwanatha Subbanna3-0/+44
led-set-all-groups-asserted.sh needs to be called with "false" as part of below transitions to turn off all indicator LEDs - BMC booting to standby and staying at standby - BMC starting to power on (From meta-ibm rev: e784b71c2d625b4507758df4bb5743fc678251f3) Change-Id: If248220964c65e91e9382504b1a7095cc5cec26b Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15fans:rainier: Install fan application config filesMatthew Barth3-0/+80
Install all the fan application config files into a rainier image (From meta-ibm rev: dd3117e5c3b6768ca6975b04ebc70f8e716529b2) Change-Id: I51d017b3a6ad34595bc9dce0fd1693c0012fc52e Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15fans:rainier: Add fan control config filesMatthew Barth6-0/+94
This commit adds the fan control config files for the rainier type machines. The recipe updates to install these files into a rainier image will collectively be done after all fan application config files are added. (From meta-ibm rev: 5d8b514768c45eee76bd19bffc432dc5778ca075) Change-Id: I5fa1f5cc879d7f3a951f7972ac391767de3647f3 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15fans:rainier: Add fan monitor config filesMatthew Barth3-0/+356
This commit adds the fan monitor config files for the rainier type machines. The recipe updates to install these files into a rainier image will collectively be done after all fan application config files are added. (From meta-ibm rev: b28c40c5cb1eeec7239f39cbf7bb0e901340b501) Change-Id: I445d141de53577e0c151ece3e258752814a631b4 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15fans:rainier: Add fan presence config filesMatthew Barth3-0/+352
This commit adds the fan presence config files for the rainier type machines. The recipe updates to install these files into a rainier image will collectively be done after all fan application config files are added. (From meta-ibm rev: f131f38e89da79848595670af0d150e01aaa664a) Change-Id: I514589fcde2a7d500e272b7d45ac90961bb46368 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15sensors:rainier: Add max31785 hwmon configMatthew Barth2-0/+31
Add the max31785 fan controller device to hwmon. (From meta-ibm rev: 71404ba4966e32bb4ed9a120062d669ed642d851) Change-Id: I4b2cd1c5379e76ccf40f52dc6ceca6a98f931f40 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-12-15Revert "health-mon: remove from ibm systems"Andrew Geissler1-3/+0
This reverts commit 3a70e470e8ec8239e27db9b7361f568cebd5ef72. The health monitor code has fixed openbmc/phosphor-health-monitor#1 so we can put this back in. (From meta-ibm rev: fc48727d30a75aa9c12d0f49d8a4124202a995ff) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I3b5e1ca730af0a06c94291e84397e24d6b2bb83d Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-23sensors:max31785-msl: Enable/install max31785-msl packageMatthew Barth1-0/+2
The max31785-msl application is now a package within the phosphor-hwmon recipe, so that package needs to be enabled and installed on `ibm-ac-server` alias of machines which have a max31785 chip. These machines require that the minimum ship level(msl) be verified on them using this application. Tested: Built phosphor-hwmon package after enabling max31785-msl package Verified application, config file, and service existed in image (From meta-ibm rev: 33184059fa07ca12e11fb9e8dde2d6a31e1f029e) Change-Id: I186fb6ca930e4107738d4ed90d31b6233be3d6f2 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-23fans: Unpin from temporary commitMatthew Barth1-2/+0
Use the latest bumped upstream commit of the phosphor-fan-presence repo. (From meta-ibm rev: a5824115356901e363c55f0d013a9821a51eba1b) Change-Id: Ib5f3e4718de3f288bf71321680d42234512d1be9 Signed-off-by: Matthew Barth <msbarth@us.ibm.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-22meta-ibm: update Yocto compat for gatesgarthPatrick Williams2-2/+2
The next release of Yocto is soon and most of the upstream layers have switched support strings for it. Support layer compat for gatesgarth (current) and dunfell (previous). (From meta-ibm rev: 284e2ad06544f567582b2732a22e052190b5b95a) Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ic1cb74ebd387715b08feccd8b94bfd0be7d35205 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-20health-mon: remove from ibm systemsAndrew Geissler1-0/+3
The phosphor-health-monitor package added some code recently that only supports a mtdblock based filesystem. This causes issues with the HW CI machine, witherspoon, documented in openbmc/phosphor-health-monitor#1. Time permitting, IBM should come back to the phosphor-health-monitor and figure out if it makes sense within it's products. If it does, then the appropriate bmc_health_config.json should be created for IBM systems. (From meta-ibm rev: 3a70e470e8ec8239e27db9b7361f568cebd5ef72) Signed-off-by: Andrew Geissler <geissonator@yahoo.com> Change-Id: I02dff59cade863d287919a01d0b1f93f67661279 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2020-11-20Dump manager: Add system_dump_policy objectSunitha Harish1-0/+6
This commit adds the system_dump_policy object to the xyz.openbmc_project.Settings. This is used to enable or disable the system dump. Default value is true Tested by: busctl tree xyz.openbmc_project.Settings └─/xyz └─/xyz/openbmc_project ├─/xyz/openbmc_project/dump │ └─/xyz/openbmc_project/dump/system_dump_policy busctl introspect xyz.openbmc_project.Settings /xyz/openbmc_project/dump/system_dump_policy (From meta-ibm rev: ad88bbcbbd01d92773f61b1712f5e458f1b661bd) Signed-off-by: Sunitha Harish <sunharis@in.ibm.com> Change-Id: Ieae8a01a266ba8ff2d984b1a1b2ea9ada243d439 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-05 07:10:42 +0300