| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Configure phosphor-cooling-type as air-cooled,since
fp5280g2 is an air-cooled machine.
Tested: Verified that the AirCooled property is true.
busctl get-property xyz.openbmc_project.Inventory.Manager
/xyz/openbmc_project/inventory/system/chassis
xyz.openbmc_project.Inventory.Decorator.CoolingType AirCooled
(From meta-inspur rev: 443c6d00a8bab54b0b7081fb7368bfb45029a1a2)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I4de4faf7a338165069fc44bbdfb73c1618838021
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: booted a fp5280g2,manually binded the OCC driver when OCC activated,
and saw core-temp,dimm-temp and power sensors via REST API.
(From meta-inspur rev: f24af46e265e6541f26fb88c650e5ef681e51898)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I5b99d406159b080a2d6be53f23250ef356e8bfe2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add phosphor-webui to enable WebUI on fp5280g2 machine.
Tested: Built and ran successfully on the fp5280g2 and login
successfully via WEBUI.
(From meta-inspur rev: 97dcbcdb072692c1bdac020f646bb67ced30819a)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I0eb3a3ece49ccedf4181a67e430b13e287749fb5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
temperature sensors inlet and outlet of tmp112, adc voltage sensors and
fan-tach sensors.
Tested: Built fp5280g2 board and loaded on the target hardware
successfully and manually verified via DBUS interface.
(From meta-inspur rev: f3c4afcb935e605f727e0552842e418db4eef6fc)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I231d14195bffac5451c98bfbabc4ecd836aead67
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This allows the machine to have the host UART output rendered to a
framebuffer and output on the BMC's graphics device up until the host
loads it's PCIe VGA driver.
Tested: Built and ran on a fp5280g2,saw that the host UART output displayed
on the monitor.
(From meta-inspur rev: 89bd7c2a383d1318ef885c50f9cc4ee5b2af1174)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Ib7c37a750b508aee314e1b3360733fe8b3eef311
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Built fp5280g2,checked that mboxd ran successfully and
fp5280g2 could boot host.
(From meta-inspur rev: 49c9e7ea09b81174f21091a9d0108a9f7cc2d9e8)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I63f868f7cedcab661e3e47a342574ebe2842b044
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in skeleton
Tested: Built fp5280g2 and checked rootfs for the config file
(From meta-inspur rev: b23e21c84ba5c7eb4184f51679f8aedb86300965)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I831f0cceb58447c6e96a422b47f8d299f9d06695
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
CONFIG_RTC_DRV_DS3232 is depended by "dallas,ds3232".
CONFIG_GPIO_PCA953X is depended by "nxp,pca9555".
Tested: Built fp5280g2 successfully and manually verified via
`bitbake -c menuconfig linux-aspeed`
(From meta-inspur rev: a79eb50fea9f49097d289652afe6ec15ed2051db)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I5b9c970d02fe587ef39a9a5d6f92b76de4334190
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
FP5280G2 is an openpower machine with onboard ast2500.
Tested: Built fp5280g2 and verified the bmc-image is generated
(From meta-inspur rev: c6e214b8172b7cbf5567f081902a87fe52d50050)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I95b49aaf8b0ad861901406d6c6cddde27a5b2dc1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
