Age | Commit message (Collapse) | Author | Files | Lines |
|
Enable the distro feature phosphor-aspeednic-use-mac2
to support MAC2
This solution is not desirable but it works for now,
For details please refer to
https://gerrit.openbmc-project.xyz/c/openbmc/meta-phosphor/+/23415
(From meta-inspur rev: 1232c626caf2b991f0eabf8de0f6c3d46d023c45)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Id8bf7dfff51e007288a3120163a882050ab84116
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Verified bmc uart1 mirrored host console on fp5280g2.
(From meta-inspur rev: 71d09b2e39900ff6061cfdef5f4ff34131a81659)
Signed-off-by: Xiaochao Ma <maxiaochao@inspur.com>
Change-Id: I90e0a1e5c328071c3bcea9f94de6d6a92db81265
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add ipmi configs for fp5280g2, by adding the following specific configs
for fp5280g2 to replace the default ones.
openpower-ipmi-oem
phosphor-ipmi-host
phosphor-ipmi-fru
Tested: Manually verified sensor, fru and sel are corrected on
fp5280g2 via ipmitool commands.
(From meta-inspur rev: 0adbf56907286b14f34b25335cc84815189cf128)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I67995cba5793d4f6a45b9912bc7e03d2ce5d8759
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Built fp5280g2 and verified that obmc-host-crash.target
was reached after error injection.
(From meta-inspur rev: 7429376f373dfe4b51c5ea24f001bb0b47516e6f)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Id0417446c9b40bdd2ebc5e5e9594b122729b0fb1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Verified that temperature sensors are returned
by `ipmitool dcmi get_temp_reading` command
responses:
Entity ID Entity Instance Temp. Readings
Inlet air temperature(40h) 1 +27 C
CPU temperature sensors(41h) 1 +26 C
CPU temperature sensors(41h) 2 +26 C
CPU temperature sensors(41h) 3 +26 C
......
CPU temperature sensors(41h) 4 +26 C
CPU temperature sensors(41h) 5 +26 C
Baseboard temperature sensors(42h) 1 +29 C
Baseboard temperature sensors(42h) 2 +32 C
(From meta-inspur rev: 397f0495707790dd38f7c3f5a32a3c37d12556df)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I59cc386c407a70cce81ea5b067ebe537524d0a9d
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Ran command `ipmitool mc info`
got responses:
Device ID : 0
Device Revision : 0
Firmware Revision : 0.00
IPMI Version : 2.0
Manufacturer ID : 51850
Manufacturer Name : Unknown (0xCA8A)
Product ID : 514 (0x0202)
Product Name : Unknown (0x202)
Device Available : yes
Provides Device SDRs : yes
Additional Device Support :
Sensor Device
SEL Device
FRU Inventory Device
Chassis Device
Aux Firmware Rev Info :
0x00
0x00
0x80
0x09
(From meta-inspur rev: 98340847a922cd3f405cc2cada1f1a75c960da7c)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I5ad8c45eba95ef27de80fd688dacbe8e1e1775ba
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fp5280g2 BMC has 2 ethernet interfaces.
One uses ncsi as the shared port and the
other is the dedicated port.
This change sets default ipmi rmcpp interface
to eth1 which is the dedicated port and ensures
that ipmi channel 1 is the dedicated port.
Tested: Ran command:
ipmitool -I lanplus -H xx.xx.xx.xx -U root -P 0penBmc lan print 1
observed correct responses:
Set in Progress : Set Complete
Auth Type Support : MD5
Auth Type Enable : Callback : MD5
: User : MD5
: Operator : MD5
: Admin : MD5
: OEM : MD5
IP Address Source : DHCP Address
IP Address : xx.xx.xx.xx
Subnet Mask : 255.255.255.0
MAC Address : ee:d4:fb:d8:00:e2
Default Gateway IP : xx.xx.xx.1
802.1q VLAN ID : Disabled
RMCP+ Cipher Suites : 3,17
Cipher Suite Priv Max : Not Available
Bad Password Threshold : Not Available
(From meta-inspur rev: 5c917d21714fdc0aada34495d647aa95c76ed1cb)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Ida216bc4054a5bce83985fd68b51eb0e4b901385
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
The fan will rotate full speed according
to the fan-control yaml,since ipmi yaml is not
configured.
Tested: Manually set a speed for the fan and observe
that the fan-control sets the fan to full speed.
(From meta-inspur rev: 4f5e77b08a50999885f1e58a50a76f8e684ad873)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: If2dd8de7c7798f446216d012fa109a2d4b044be8
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fp5280g2 uses two types of fans,one(12000 rpm) for
low performance machine and one(17000 rpm) for high
preformance machine,so fan-monitor need a large `deviation`
to work properly.
Tested: Manually adjusted the speed and observed
the Functional properties of the fan.
(From meta-inspur rev: 041caf3c0b2a7abb692d26c3e1925375c75d8bac)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I7540892cc63da1c1cb8745daa0e6e5d7ef522712
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Fp5280g2 uses GPIOs to detect fan presences.
Tested: Verified that the Present property in dbus corresponds
correctly reflects wheather a fan is present or not.
busctl get-property xyz.openbmc_project.Inventory.Manager
/xyz/openbmc_project/inventory/system/chassis/motherboard/fan0
xyz.openbmc_project.Inventory.Item Present
(From meta-inspur rev: 92dd17dc6efbf3eafc1a661e51ad5ae81ee8293d)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I72960a336e003868df3fa1715bd9ca2c3383fdc1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Configure phosphor-cooling-type as air-cooled,since
fp5280g2 is an air-cooled machine.
Tested: Verified that the AirCooled property is true.
busctl get-property xyz.openbmc_project.Inventory.Manager
/xyz/openbmc_project/inventory/system/chassis
xyz.openbmc_project.Inventory.Decorator.CoolingType AirCooled
(From meta-inspur rev: 443c6d00a8bab54b0b7081fb7368bfb45029a1a2)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I4de4faf7a338165069fc44bbdfb73c1618838021
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: booted a fp5280g2,manually binded the OCC driver when OCC activated,
and saw core-temp,dimm-temp and power sensors via REST API.
(From meta-inspur rev: f24af46e265e6541f26fb88c650e5ef681e51898)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I5b99d406159b080a2d6be53f23250ef356e8bfe2
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Add phosphor-webui to enable WebUI on fp5280g2 machine.
Tested: Built and ran successfully on the fp5280g2 and login
successfully via WEBUI.
(From meta-inspur rev: 97dcbcdb072692c1bdac020f646bb67ced30819a)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I0eb3a3ece49ccedf4181a67e430b13e287749fb5
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
temperature sensors inlet and outlet of tmp112, adc voltage sensors and
fan-tach sensors.
Tested: Built fp5280g2 board and loaded on the target hardware
successfully and manually verified via DBUS interface.
(From meta-inspur rev: f3c4afcb935e605f727e0552842e418db4eef6fc)
Signed-off-by: George Liu <liuxiwei@inspur.com>
Change-Id: I231d14195bffac5451c98bfbabc4ecd836aead67
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
This allows the machine to have the host UART output rendered to a
framebuffer and output on the BMC's graphics device up until the host
loads it's PCIe VGA driver.
Tested: Built and ran on a fp5280g2,saw that the host UART output displayed
on the monitor.
(From meta-inspur rev: 89bd7c2a383d1318ef885c50f9cc4ee5b2af1174)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: Ib7c37a750b508aee314e1b3360733fe8b3eef311
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
Tested: Built fp5280g2,checked that mboxd ran successfully and
fp5280g2 could boot host.
(From meta-inspur rev: 49c9e7ea09b81174f21091a9d0108a9f7cc2d9e8)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I63f868f7cedcab661e3e47a342574ebe2842b044
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
These GPIOs are used by the code in skeleton
Tested: Built fp5280g2 and checked rootfs for the config file
(From meta-inspur rev: b23e21c84ba5c7eb4184f51679f8aedb86300965)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I831f0cceb58447c6e96a422b47f8d299f9d06695
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
CONFIG_RTC_DRV_DS3232 is depended by "dallas,ds3232".
CONFIG_GPIO_PCA953X is depended by "nxp,pca9555".
Tested: Built fp5280g2 successfully and manually verified via
`bitbake -c menuconfig linux-aspeed`
(From meta-inspur rev: a79eb50fea9f49097d289652afe6ec15ed2051db)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I5b9c970d02fe587ef39a9a5d6f92b76de4334190
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|
|
FP5280G2 is an openpower machine with onboard ast2500.
Tested: Built fp5280g2 and verified the bmc-image is generated
(From meta-inspur rev: c6e214b8172b7cbf5567f081902a87fe52d50050)
Signed-off-by: John Wang <wangzqbj@inspur.com>
Change-Id: I95b49aaf8b0ad861901406d6c6cddde27a5b2dc1
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
|